Airport utility can't read settings on my airport express after down loading update to yosemite

airport utility can't read settings on my airport express after yosemite update

I already did that & it works but i shouldn't have to do it at all, only started after update.

Similar Messages

  • Why can I not open raw images in bridge after down loading raw plug-in for my new Canon 70D?

    Why can I not open raw images in bridge after down loading raw plug-in for my new Canon 70D dozens of times?  I have never had any where near this amout of trouble with all my other Canon digital cameras. 
    <Removed by Moderator>

    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Mylenium

  • AirPort Utility can't see either AEBS or AirPort Express using either comp.

    I have an AirPort Extreme Base Station (AEBS) and an AirPort Express (APE). The dsl connects to the AEBS via ethernet (in the first slot), and the AEBS connects to the desktop via ethernet (in the second slot; it has no AirPort card). The PowerBook (PB) connects to the network via its AirPort card, and the APE is used to extend the network range.
    All of this worked as of last night.
    This morning when I woke the PB, it wouldn't connect to the network automatically. I tried to connect manually, but it wouldn't accept the password. (Maybe I'd forgotten, when's the last time I had to enter it?) I went to the desktop to set up the AEBS to reset the password. Both the AEBS and AirPort Express showed up on AirPort Utility (AU) on the desktop before doing so.
    After resetting the password, neither showed up in AU. (I suppose it's not surprising that the APE wouldn't, but the AEBS is connected via ethernet, and the ethernet is working or I couldn't connect here as set up.) I get the message that AU can't detect any Apple wireless devices. I rescanned several times with no luck. And I have pressed the reset button on the AEBS to no avail.
    I also can't see either the AEBS or the APE with the PB, which does have an AirPort card, as I mentioned.
    Any help or advice would be appreciated.

    Theirry, I had (among all the other things I'd done) already pushed the reset button for a little while, but that didn't work. So, not knowing what else to do, I pushed it and held it while I counted to ten three times, and that worked. Probably one could get away with less.
    After that, I had to start over again with the AEBS on AU, but I gave it the same network name and the password I thought I remembered, and the APE rejoined it automatically.
    I hope that helps.

  • Airport Utility can't read my AEBS configuration

    I know there have been thousands of questions/answers to this topic, but I'm stumped.
    As of last night, my AEBS has not been cooperative. It has been working perfectly ever since I got it last December. As far as I know I have not made any changes. I am running 10.5.8. Everything is up to date. My airport utility is able to locate my device, but as soon as I press "continue" it can't read the configuration & comes back with an error saying the utility was unable to find my airport wireless device. And yes, I've tried everything.
    -soft reset
    -hard reset
    -using ethernet cable
    -re-installed airport utility.
    -restart, unplug, reboot, etc...
    -searching countless forums, posts, blogs all to no avail.
    I'm having to use my neighbor's wireless connection to get on the internet. The odd thing is that I have a business VOiP phone connected to my router, and it works just fine. I just can't configure my AEBS now that I restored it to it's default settings. Boggling my mind.

    I'm having a similar problem. It turns out that there is some kind of voltage issue on the WAN side of my equation. I bought a second Airport Extreme, thinking my WAN port was smoked. When I plugged the WAN wire into the new Extreme, everything worked. Old Extreme, I get Ethernet unplugged. Worked for about a week on the new one, then rebooted the new Extreme and kaput, nothing works. I tested the WAN connection to my Macbook - works great. If I take a Dlink router, plug the WAN into that, plug another wire from the DLink to Extreme WAN, Airport is happy.
    There is a specific sensitivity (voltage?) to the Airport Extreme WAN port that makes it say the Ethernet is Unplugged. As an added bonus, my testing seems to confirm that when this condition exists, the Extreme also shuts down all the other router ports, as over wireless I can not access the other physical segments (i.e. my NAS). Yet if I my WAN is happy on the Extreme, the other ports work as well.

  • AEBS stopped working/ airport utility can't read base station configuration

    AEBS was working fine including the 7.1 update except printer wasn't working. As I attempted to trouble shoot network, AEBS stopped working. I tried accessing it through airport utility but it couldn't find the base station. I have now done a hard reset four times and though airport utility will recognize the base station it gets hung up trying to read the base station configuration. So I can't troubleshoot the AEBS from airport utiltity and the yellow light keeps flashing. What do I do now?

    AEBS was working fine including the 7.1 update except
    printer wasn't working. As I attempted to trouble
    shoot network, AEBS stopped working. I tried
    accessing it through airport utility but it couldn't
    find the base station. I have now done a hard reset
    four times and though airport utility will recognize
    the base station it gets hung up trying to read the
    base station configuration. So I can't troubleshoot
    the AEBS from airport utiltity and the yellow light
    keeps flashing. What do I do now?
    I had the same problem and a hard reset (6 seconds on the reset button) was recommended by Apple Tech support and that did it for me. The AE was back being seen and allowing me to reconfigure it from scratch.

  • Airport disk utility can't read time capsule after a relocation

    airport disk utility can't read time capsule after a relocation. Wether I connect ethernet or wifi, airport doesn't read it. Even after reset.

    Do a full factory reset.. and you will need to reconfigure it.. that is the usual process when you move networks.
    You can do a fully manual setup though. The new v6 utility is just lousy at locating the TC.. if you still have a computer.. even a PC running windows it will do fine on v5 as long as the TC is not the latest model..
    Or use iOS version airport utility.. it also seems to have less issues than the mac version.

  • Airport Utility can no longer see my Airport Express Base Station.

    Hi all the problem I have is as follows;
    I've set up my Airport Express Base Station some time ago to print wirelessly from my HP Photosmart C4280 and it was working fine.
    However recently when I've gone to print a document, even though the printer is working fine and the Airport Express Base Station is showing a green light nothing happens. I've gone into the Airport Utility and its say's it can't see the Airport Express Base Station (even though it still has a green light showing). If I unplug the Airport Express and plug it in again, the Airport Utility can suddenly see it again.
    I've successfully gone through the reset process but after a few minutes the Airport Utility can no longer see the Airport Express Base Station which means I can't print a document wirelessly. I've repeated the reset process several times with the same outcome.
    Everything was working fine up until recently, has the Airport Express Base Station developed a fault? or is there something I'm not doing.
    Any advice would be greatly appreciated.

    If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
    Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

  • Airport Utility can't see Airport Express Device

    I tried to print some documents and I received a message telling me the printer is not ready or may not exists, so I launch the Airport Utility to see what is going on and there is no Airport Express just my Time Capsule.
    I already reset the airport express to factory settings and everything goes ok until the green light shows but the airport utility can't see it.
    Any help will be appreciate
    thanks
    Dan
    I already tried connecting the Airport Express to my computer with an ethernet cable

    Connect an Ethernet cable between the wall jack and the WAN (circle of dots) port on the AirPort Express. Connect a second cable between the LAN (opposing arrows) port on the Express to your computer.
    You should now be able to access the Express using the AirPort Utility to configure the Express as a WAP.

  • After port forward, airport utility can no longer see my time capsule

    I tried to forward public port 1025 to private port 80 on a raspberry pi using  airport utility. But after I did that,  the airport utility can no longer see my time capsule. Wifi still works correctly. Are there any conflicts about port 1025? How to fix that other than resetting the time capsule?
    Thanks,
    Michael

    It doesn't sound like a port that is used.
    From the standard google search.. nope.
    Reboot the whole network..
    No luck tell me what OS version you are running the utility on and what model and firmware TC???
    Note with Yosemite, anything can and will happen.

  • Loaded Mountain Lion and time capsule no longer works, airport utility can't be configured, back ups have stopped, sparse bundle in use errors occur, what a mess!!!!

    Should Airport Utility now be defunct for my time capsule because I have upgraded OS to Mountain Lion? I have tried every fix I can think of but AU will not set up. I'm also getting repeated time machine back up failures and now I have a new "sparsebundleinuse" error which is totally useless to me, I have no idea what a sparse bundle is, I have no idea what it's suddenly being used by and there's no information to say what to do about it. Apple is killing me here!!!

    I've tried to but on the install for Airport Utility 6, after the download I get through the introduction then the license then I get "airport utility can't be installed on this disk. The version of Mac OS X on this volume is not supported" and that's it, no more options!?

  • Network works fine but Airport Utility can't see the Airport

    If someone knows of an earlier discussion on this I'd be grateful for a pointer. My Airport Extreme network has been working fine, syncing with Apple TV, accessing the Internet, etc, but The AirPort Utility can't find it! I discovered this when I had trouble printing and started up the Utility to see if there was something I could do to fix it. The utility can't find it but the network is working fine. However I do need to connect a printer to it.
    Any advise on what I can do?

    iFelix wrote:
    I know this may sound obvious and silly, but are you actually connected to your Airport wireless network and not a neighbouring network?
    I thought of that myself and there are at least four networks around my house (three unprotected!) but no, I am connected to the AirPort network!
    I'll try one other thing before I do a hard reset though. A week or two back I'd tried to connect an Airport Express manually by creating a WDS. Never got that to work and that may be a problem. I notice that if I do a soft reset the AirPort Extreme become visible in the Utility for a few minutes. I'll go th manual setup and see if I can't delete that WDS...

  • I have a older Airport Express unit that requires Airport Utility 5.6. When I try to install 5.8 on my OS X10.8 iMac, I get the message "Airport Utility can't be installed on this disk. The version of Mac OS X on this volume in not Supported"

    I have a older Airport Express unit that requires Airport Utility 5.6. When I try to install 5.8 on my OS X10.8 iMac, I get the message "Airport Utility can't be installed on this disk. The version of Mac OS X on this volume in not Supported"

    Why should I have to spend money to solve this problem? Many others have the same concern, Airport Utility 6 does not support  older Airport Express units. This is Apple's problem. I've tried many solutions proposed on the net but none worked. I'm still trying for a work around.

  • My airport utility can't find the airport device.

    Everything is connected. I bought the device about eight months ago and have used it successfully to set up wireless networks twice. Now i have a DSL modem, and there was an error that the IP was in use. So i followed some tips online to reset both devices, restart, etc. Currently i have everything connected and plugged in, including with an extra ethernet cable from my laptop to the airport's wan port. However, NOW the airport utility can't find the device and it's just sitting there blinking amber slowly. The modem is all lit up and green and appears to be working. ***? is the airport express broken?

    adubatowka14 wrote:
    I got the AU to find my AE by connecting them with an ethernet cable.
    How are you configuring up the Express once you have AU working with it? Please provide us with what you want/need to have.

  • Airport utility can not find extreme station after upgrade to 7.5.2

    i been using extreme for about 3 years and it was fine until yesterday i upgrade to 7.5.2, it result i lost the internet. opened airport utility from my macbook, said" it can not find any wireless device" but on the top right of mac windows, the signal sign is still there,
    i suspect it is something wrong with the IP setting, but i has't changed any thing myself, maybe the new updates change it?

    kfc360 wrote:
    "it can not find any wireless device"
    Welcome to Apple's discussion groups.
    Your system details don't mention what type of Mac you have, but if you can move it near to the AirPort Extreme and connect an Ethernet cable to a LAN port on the Extreme, then AirPort Utility should be able to see it. Once AirPort Utility can see it you can begin to investigate the problem in more detail.

  • AirPort Utility can't be installed on this disk. The version of Mac OS X on this volume is not supported

    This meassage I've got after trying to install the software:AirPort Utility can't be installed on this disk. The version of Mac OS X on this volume is not supported.
    Please, advise.

    What version of AirPort Utility are you attempting to install, and which AirPort Base Station model do you have? Look on its case for a four digit model number preceded by the letter A.

Maybe you are looking for

  • My story so far, TROUBLES

    Hi! I know there are a lot of complaints about the MBP in this forum, and unfurtunatly this will add to it somewhat, but most of all i am disapointed with the service of Apple's Techincal Support. So i have a MBP 1.83 gHZ week 12. It has always been

  • Blackmagic Intensity Pro using Premiere Pro CS5 Problems!

    Blackmagic claims there are not alot of problems with the Intensity Pro and Premiere ProCS5. Well I am having my fair share. Msvcr90.dll App Error (fixed this on my own doing Microsoft updates) Decklinkapi64.dll App errors (crash) while editing from

  • "could not read the file because the plug-in could not understand the file."

    "could not read the file because the plug-in could not understand the file." I keep getting this error when trying to open some of my illustrator files. Usually after trying 5 or 6 time it will mysteriously open without a problem. I've reinstalled Il

  • Data Model Extension

    Hi Techies, Could you please look at the below scenario and provide your valuable inputs. Scenario: I am trying to load the Cost Centers from ECC to MDG via MDMGX t code. The CR is not being created and data is not being loaded to the MDG Cost center

  • You keep rejecting my password, sorry i give up if I cannot download

    I have spent over an hour and you keep rejecting my password. I give up, I have spent too much time although I want to download, I dont need the frustration.