AISUSER not assigned - Giving error during Maintenance Optimizer

Hi Tech Masters,
I am trying to set up Maintenance Optimizer on Solution Manager 7.0 SP15 ( WIndows 2003).
I am using wizard to do this. But I am getting error when I am trying to update "Assign S-User for SAP Support Portal functionality" ( Basically the AISUSER Tcode does ) :
When I am entering new entries, Its allowing me to enter User , SAP Customer No, but whenver I am trying to input Contact Person Its giving me the following error :
"Partner number 0000000000 was not found in table AICONTACTS."
Please help me out.
Thanks
Rabi Pal

Are you sure that you are entering the correct Customer Number and the corresponding S-userid is correct ?
May be this problem is related with several customer number administration ? check these notes
Note 1151450 - FAQ: Managing several customer numbers - Support Package 15
Note 1082010 - Administration of several customer numbers

Similar Messages

Error in maintenance optimizer generating Stack File XML

Hi all,
In step 3 "Download Files" of maintenance optimizer transaction to implement the EHP5 of ERP, In the tab "Log" I see the following error.
*Collecting XML adjustment input data done with error or warning.
Message no.AGS_MOPZ_PLAN_MSG144*
The stack XML file is very very important to the ehpi installer, then I need to know which implications have the error below...
I create 3 Maintenance Optimizer transactions, and in all of them, the error appears.
Thanks a lot.

Hello,
Please check if the SPAM level of the Solution Manager is the latest.
If this does not help, please check the details about the error message in transaction SLG1 (this transaction is the full application log). There should be extra text / error message explaining the situation, you only have to look for the error around the time when you got the 'Collecting XML adjustment input data done with error or warning' message.
Best regards,
Miguel Ariñ

System not available for selection in Maintenance Optimizer

Hello,
When planning the maintenance in MOPZ I choose product version and the system displays a list of systems assigned to the Product Version. However, the list only shows one of the two systems assigned to the logical component (prod system). I have looked at the logical component in SMSY listed under SAP ERP -> SAP ECC Server -> Z_SAP ERP and both systems are listed and are "green". A Consistency Check of the logical component shows no errors.
Any ideas are helpful, thank you.

Hello,
There is no 'display filter' on the screen you are referring to, Change Management -> Maintenance Optimizer -> Create New Maintenance Transaction. This is the initial screen of the maintenance transaction where it shows the 5 steps of the maintenance transaction. The following selectable fields are available:
Priority
Short Text
Product version
When I make a selection for the product version an additional selectable table is available where I can select the systems. I should be able to see all the systems assigned to the logical component, however I only see one of the two systems.
I have checked two other Solution Manager systems and there is no 'display filter' or 'hide filter' button either.
Regards,
Robert

Error in Maintenance Optimizer in step "Select files for component "

Hi everybody,
i would like to download patches for my system. I have defined a solution and now i will start the Maintenance Optimizer procedure to download, but when i press a button "Select Files..." an error "the page cannot be displayed" occurred.
Does anybody know what should i check in my configuration? Where can I find more details for error?
Regards
Bogdan

Hi,
Here is the whole solution for you.
Hope you have implemented the note 990534 properly.
This is what I have done to resolve the same issue -
Apply patch ST-ICO 8 and 9
generate BC set SOLMAN40_MOPZ_TTYP_SLMO_000
generate BC set SOLMAN40_CHARM_PROXYFACT_001
If the error still persist, you will need to work on the below notes. (997780)
Goto SPRO - IMG>SAP SOL MGR>SCENARIO SPECIFIC>CHANGE REQ MGMNT>EXTNDED CONFIG>CHANGE TXN>CONSISTENCY CHECK IN CHANGE REQ MGMNT (define basic settings SOCM_CHECK_002)
Deselect the 'Integr' field (integration with change management is required) for the checks listed below. The system issues a message stating that changes are not allowed and that the entries are SAP property. This is only a warning message. Choose ENTER to ignore the message and save your changes.
Checks:
           IB_SYST_CHK
           S_USER_CHECK
           REQUEST_IN_PROCESS
           SOLUTION_ASSIGNMENT
           PRODUCT_ASSIGNMENT
           S_USER_CHECK
           EMPTY_CONTAINER
           SYSTEM_STATUS_OK
If you are getting the error "no active ibase" after this, try to implement 1030498.
Hope this helps. If this corrects your issue, please mark the question as answered and award points.
Thanks,
Mehfil Meherali

PS-Remoting done in DC's ; but giving error during the validation

Hi
I have done PS-Remoting for DC's through the list of DC's from a AD management server .
Getting the error during validation through the Powershell cmd Enter-PSSession -computer "Dcname"
But when I login to the particular DC from where the above error points, and renabling the PS-Remoting as below
,the Enter-PSSession cmd gives the result correctly
Do I have to login to the DC's in the list one by one and renable as above or how to solve this issue ?
Thanks & Regards S.Swaminathan Live & let others live!!!

Hi,
This is not an issue. This is by design.
The Windows PowerShell remoting features are not enabled on Windows Server 2008 and Windows Server 2008R2 by default.
If we want to use these features, we need enable them by using the command
Enable-PSRemoting –force.
For detailed information, please refer to the link below,
Enable and Use Remote Commands in Windows PowerShell
http://technet.microsoft.com/en-us/magazine/ff700227.aspx
Besides, these features are enabled on Windows Server 2012 and Windows Server 2012R2 by default.
Best Regards.
Steven Lee
TechNet Community Support

[SOLVED] Pacman "config file could not be read" error during Arch ins

I've been attempting to get Arch setup for a while now, and after having some trouble with partitions, my wireless connecting, and setting up repos and mirrors, which the Wiki helped me solve, I've hit a bigger bump. While updating the system using pacman as the Beginners Guide says to do, I get errors when I try to continue the update process as follows :
btw: I'm typing this on a laptop next to my computer
[root@McArch~]# pacman -Syu
error: config file /etc/pacman.d/core could not be read
error: config file /etc/pacman.d/extra could not be read
error: config file /etc/pacman.d/community could not be read
:: Synchronizing package databases . . .
error: failed to updated core (unexpected error)
error: failed to updated extra (unexpected error)
error: failed to updated community (unexpected error)
error: failed to synchronize any databases
Any tips as to whats going on? I've tried to created said files, and even insert mirrors into the file, like in the /etc/pacman.d/mirrorlist file but this doesn't seem to help
Last edited by Windfinder (2008-09-29 20:43:29)

Glad you got it working.
I'm not sure what happened in your install but I just finished using an old 2007.08 iso and pacman first starts out with /etc/pacman.d/core, etc/pacman.d/extra, /etc/pacman.d/community ... etc., but I never had your problem when I did the #pacman -Syu after initial install reboot. The pacman update removes the above mentioned repos and replaces them with a single /etc/pacman.d/mirrorlist. You must have messed up an initial config file somehow as I couldn't get the same errors you got. It looks like you had your /etc/pacman.conf file messed up somehow and when you pointed it to the mirrorlist it could finally work properly. I'll just include my /etc/pacman.conf file and /etc/pacman.d/mirrorlist so you can compare. NB* these are from my x86_64 so for 32 bit machines i686 would replace x86_64 in the files.
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
/etc/pacman.d/mirrorlist
# Arch Linux repository mirrorlist
# North America
# - United States
Server = http://mirror.neotuli.net/arch/$repo/os/x86_64
Server = http://holmes.umflint.edu/archlinux/$repo/os/x86_64
Server = http://archlinux.unixheads.org/$repo/os/x86_64
Server = ftp://ftp.archlinux.org/$repo/os/x86_64
Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/x86_64
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/x86_64
Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/x86_64
Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = http://mirror.rit.edu/archlinux/$repo/os/x86_64
Server = http://mirror.umoss.org/archlinux/$repo/os/x86_64
# - Canada
Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/@carch
Well it was an interesting way to kill 30+ minutes.

Sun Directory Server giving errors during installion

Hi,
Iam new to the LDAP world.
Iam trying to install, a Sun Directory Server on windows platform.
Iam using the zipped package of the installation.
While installing , the error i encounterd is as follows:
Error: dsccsetup failed.
Please help in installing the server.
Thanks

Hi.
We need more info to help you. Which version are you trying to install (6.0 / 6.1 / 6.2) ? Which command are you running ? Can you give all the output not only the error ?
Regards,
Carole.

Not Enough Memory Error During Update

There is a new update for Ovi Maps 3.04 today. I tried to install it using the Software Update app and kept getting a not enough memory error. I even tried closing all programs, deleted a few apps I no longer use and restared my phone. Still I get the error.
Any suggestions?
<\
\>tuntman

Have a read of this thread as i suffered the same problem:
/t5/Maps-Navigation-and-GPS/E52-error-when-installing-ovimaps/m-p/751192#M27026

Error with Maintenance Optimizer in Solution Manager 4.0

Hi, I am configuring Solution Manager for download SP, I check marketplace and download the guide, when I try to download a SP following message show me:
"Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM)."
I go to sm59, verify RFC SAP-OSS with correct data, I found at guide following Host :
/H/54.16.44.50/S/sapdp99/H/54.62.200.35/S/
When I try press Connection Test Buttom I can not connect to SAP.
Do you know which can be my error? .....
Regards.

Hi,
Following the note 1024932
Steps to do before configre the maintance optimizer you need to configure sattilite systems in solution manager.
go to SMSY and configre R\3 systems.For these systems you need to create RFC connections and Logical comp.
http://service.sap.com/rkt-solman
for tutors and PDFs how to set up MOPZ.
Points if it helpfull
Regards
Neni

HTTP PUBSUB not initializing giving [ Error: missing } in XML expression ]

Hi
I am using WEBLOGIC 10.3 pusub sever and dojo-release1.1.1
**I have created a channel with the following config as below**
<wlps:channel-constraint>
<wlps:channel-resource-collection>
<wlps:channel-resource-name>subscribe</wlps:channel-resource-name>
<wlps:description>subscribe channel constraint</wlps:description>
<wlps:channel-pattern>/DispatchView/**</wlps:channel-pattern>
<wlps:channel-operation>subscribe</wlps:channel-operation>
<wlps:channel-operation>create</wlps:channel-operation>
<wlps:channel-operation>publish</wlps:channel-operation>
</wlps:channel-resource-collection>
In my client side I have the following code in a page.
dojo.require("dojox.cometd");
var DEFAULT_CHANNEL = "/DispatchView/PubSub";
cometInit = function(){
               dojox.cometd.init("cometd");
               log( 'cometd initialized' );
onMessage = function(msg) {
     log( 'onMessage() ' + msg.data.test );
//alert(msg.data.test);
//handles subscribe onclick
onSubscribe = function(){
     dojox.cometd.subscribe( DEFAULT_CHANNEL, 'onMessage');
     log( 'subscribed to ' + DEFAULT_CHANNEL );
cometInit();
onSubscribe();
Whenever I am opening the page its giving me the following error.
[ Error: missing } in XML expression ]
handshake error!: [ Error: missing } in XML expression ]
cometd init failed
Retry in interval+backoff=0+4000=4000ms
[ Error: missing } in XML expression ]
handshake error!: [ Error: missing } in XML expression ]
cometd init failed
Retry in interval+backoff=0+5000=5000ms
Am I missing something. Can any body help me with this.

Hi,
The problem in your code is you haven't mentioned the server URL which is needed to subscribe.
dojox.cometd.init("cometd"); this is a wrong intitialization instead you have to use
dojox.cometd.init("http://localhost:9002/pubsub"); or something like this with an appropriate URL. In this URL /pubsub is context path and not the default channel you subscribe. This was the reason for your error (cometd init failed)
Please let me know if the problem get solved or still u have any queries regarding the same.

R12 Version 12.0.6 Log in Page not opening - giving error

You have encountered an unexpected error. Please contact the System Administrator for assistance.
DB is running OK , but the application is giving problem,
SR raised , any quick help is appreciated
Regards
Koti

Resolved by checking the alter log in the DB that showed us that the table space is not there.
After extending the table space the issue resolved
Thanks
Koti

Itunes application will not open giving error code (-50) after update

I'm having a bit of a problem with itunes. I'm running windows 7 64-bit and I hope someone could help me. When I finished making some purchases from itunes store over the weekend, I was told that there was an update for itunes. So I updated itunes and now I cannot get into itunes period. Luckly I was able to back up my purchases. When I try to open a movie that I purchased from the backup folder, I get a message that says "The iTunes application could not be opened. You do not have enough access privileges for this operation." or when I try to open itunes running as administrator I get another message "the itunes application could not be opened. An unknown error occurred (-50)." I am the only person using this computer and I have full admin rights. I had tried to download itunes again and even repaired itunes, but it just keeps crashing (B.S.o.D.). My OS is up to date. It also shows that itunes is running in task manager. So I have no idea wt heck is going on. Any help would be thankful.

I had tried to download itunes again and even repaired itunes, but it just keeps crashing (B.S.o.D.).
What numerical and text codes are you getting for the BSOD? (For example, 0X0000007E.)
If the blue screen is referencing a specific file (for example, ati3duag.dll), let us know what the file is called too.

Ichat video not working- giving error

I have successfully used ichat video when I hook my mac directly to my cable modem. But it errors out when I have my typical cabling in place. Comcast cable modem, Vonage box, netgear router, then imac computer. In that sinario, my video ichat doesn't work. At this time, I really don't understand opening ports, but went into my netgear settings and have port forwarding enabled with my computer IP address. I also have UPnp turned on. Any other suggestions?

Not exactly.
Many routers and modems now come with Protection features that are in effect Firewalls but can be regarded to some extent as filters.
+Denial Of Service Attacks (DoS)+ hark back to the days when people would gang together to bring down large company Web servers by all logging into a web page and hitting refresh again and again.
This would tend to overload the internet service that server had causing it to crash.
With higher speed internet connection and faster computers this can almost be done by one person and a bit of scripting.
Wiki on this
So.... The manufacturers have built in DoS Protection that stops any connection on the port it is happening on - if it feels/judges that the data is "Too Much Too Fast". This is designed to stop you losing your whole internet connection.
From there you have to consider the risk.
Are you a big enough target for anyone ?
Are you likely to be "Discovered" on-line for anyone malicious enough to be doing this on a more random basis ?
+Stateful Packet Inspection (SPI)+ basically judges whether the data stream is legitimate
Wiki again
In addition to this a device may also have it's own Firewall.
Much like the one on a computer this will be the thing you are thinking off in terms of stopping unwanted intrusions by allowing or not allowing various ports.
Some autopmatically open any port you have in the method used to open ports.
Some need setting in both places as it were (both Port Forwarding/Port Triggering/UPnP/DMZ and the firewall)
Now the thing here to remember that on most devices the ports below port 1024 are not subject to NAT and are therefore open anyway.
NAT is the bit that routes data on one port to a port with an IP to make sure it goes to the computer or device it should.
As web browsing and mail apps tend to use ports below 1024 then this is why you can almost always get on the the Internet (Web Browse) and get email - almost no matter how you set up your LAN (connection devices).
As most attacks are going to be in email form or malicious websites using malicious Flash setups (See this on UPnP on Wiki) the need for a firewall per se drops off.
NAT itself tends to hide you from the Internet Directly.
Firewalls do offer you at least the idea of where data is coming and going (but it is surprising how many applications "Call home" when launched (Advised of a new version of something ?)
So in summary.
DOS a or SPI are useful if you think or know you may be attacked in that fashion.
They are additional features to any other firewall and the NAT Process.
They are, on the whole, fairly arbitrary in the way they act with no adjustment.
Faster Internet services are likely to bump into these settings more and more doing more common action like Streaming a video.
On some devices the amount of data in iChat Video from a fast internet service can bump into them particularly in Leopard where all the data is on one port.
I hope this helps.
10:30 PM Friday; April 18, 2008

BBM 7 giving error during setup.

I have upgraded my BB OS and have lost all of my bbm contacts and it doesn't restore from the BlackBerry ID (Temporary BBM Server Error). I have tried downgrading to BBM 6 and then back to BBM 7, but the same problem persists. Can anyone please assist me on this?

Hello!
Here is a KB that discusses that error:
KB33780 "A temporary server error has occurred error" may be displayed during initial setup of BBM and BBM contacts appear to have disappeared
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Oracle webcache is not restarting, giving errors

Oracle webcache is not starting .
opmnctl status showing process webcache status "DOWN" but webcache-admin is "ALIVE ".
This happened after a restart of the server.
This happened after I changed the password for the "administrator" user by logged in as "weblogic" through URL &restarted the server after this(Restarted the server itself, not just through opmnctl)
http://host:7001/em.
This pasge is accessible but unable to restart webcache in here-through webcache->control->restart
Also treid through command prompt
E:\Oracle\Instances\CoreHR\bin>opmnctl startproc ias-component=webcache1
opmnctl startproc: starting opmn managed processes...
===============================================================================
opmn id=CEWDDMC01-V:6701
Response: 1 of 2 processes started.
ias-instance id=CoreHR
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
webcache1/WebCache/WebCache/
Error
--> Process (index=1,uid=1993,pid=1108)
failed to start a managed process after the maximum retry limit
Log:
E:\Oracle\Instances\CoreHR\diagnostics\logs\WebCache\webcache1\console~WebCac
e~1.log
Tried
[code]
opmnctl startall
opmnctl startall: starting opmn and all managed processes...
================================================================================
opmn id=CEWDDMC01-V:6701
Response: 0 of 1 processes started.
ias-instance id=CoreHR
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
webcache1/WebCache/WebCache/
Error
--> Process (index=1,uid=2013,pid=8776)
failed to start a managed process after the maximum retry limit
Log:
E:\Oracle\Instances\CoreHR\diagnostics\logs\WebCache\webcache1\console~WebCach
e~1.log
E:\Oracle\Instances\CoreHR\bin>opmnctl status
Processes in Instance: CoreHR
---------------------------------+--------------------+---------+---------
ias-component                    | process-type       |     pid | status
---------------------------------+--------------------+---------+---------
rep_corehr                       | ReportsServerComp~ |    8908 | Alive
emagent_CoreHR                   | EMAGENT            |    3880 | Alive
RptSvr_CEWDDMC01-V_CoreHR        | ReportsServerComp~ |    8836 | Alive
Discoverer_CoreHR                | PreferenceServer   |    8984 | Alive
Discoverer_CoreHR                | ServicesStatus     |    8384 | Alive
webcache1                        | WebCache-admin     |    3236 | Alive
webcache1                        | WebCache           |     N/A | Down
ohs1                             | OHS                |    8512 | Alive
[/code]
The console webcache.log shows
[code]
15/03/04 12:24:50 Start process
Audit init
Cache Server failed to start
Refer to E:\Oracle\Instances\CoreHR\diagnostics\logs\WebCache\webcache1\event_log for more information
[/code]
The event log file shows:
[code]
[2015-03-04T12:24:50+00:00] [webcache] [NOTIFICATION:1] [WXE-08513] [logging] [ecid: ] Cache server process ID 6120 is starting up.
[2015-03-04T12:24:50+00:00] [webcache] [NOTIFICATION:1] [WXE-09612] [main] [ecid: ] Oracle Web Cache 11g (11.1.1.6), Build 11.1.1.7.0 130113.0741
[2015-03-04T12:24:50+00:00] [webcache] [NOTIFICATION:1] [WXE-13002] [config] [ecid: ] Maximum allowed incoming connections are 500
[2015-03-04T12:24:50+00:00] [webcache] [NOTIFICATION:1] [WXE-09441] [stats] [ecid: ] DMS enabled
[2015-03-04T12:24:51+00:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Possibly caused by a corrupted disk or by some other process overwriting the file.
[2015-03-04T12:24:51+00:00] [webcache] [WARNING:1] [WXE-11905] [frontend] [ecid: ] SSL additional information: E:\Oracle\Instances\CoreHR\config\WebCache\webcache1\keystores\default
[2015-03-04T12:24:51+00:00] [webcache] [ERROR:1] [WXE-09709] [main] [ecid: ] Failed to initialize the HTTP component[/code]
Please advise any way to try to to restart webcache ?

If you suspect that the wallet got corrupted, you could check this note to recreate the wallet:
How to Create a Wallet via Fusion Middleware Control in FMW 11g (Doc ID 1226834.1)
And, for resetting administrator password: How To Change The WebCache Administrator Password When Forgotten? (Doc ID 1380426.1)
Regards,
Mohab

AISUSER not assigned - Giving error during Maintenance Optimizer

Similar Messages

Maybe you are looking for