Aiuto Riproporzionare tutto in Indesign CS6! readjust text and images from (30x30)cm to (23x23)cm..without rewrite everything

Ciao a tutti!
Si dà il caso che io abbia impostato un'ottantina di pagine in formato 30cm x 30cm (quindi un quadrato leggermente più largo di un a4 in orizzontale!)...ebbene mi sono accorta che è troppo grande il formato per quel che devo fare...perciò se volessi trasformarlo in un quadrato 23cm x 23cm devo riproporzionare tutto!immagini e testo!..c'è un metodo veloce per farlo che non sia riscrivere ogni cosa?.... :((((
Grazie mille!
Hello to everyone! I set a custom page size of (30x30)cm but I made a mistake..now I need to format a page size of (23x23)cm and I have to readjust/proportion all the text and the images...Is there a simple way to do it without rewrite everything? like a command to proportion or something else? Please help me it's urgent! I don't know how to make it faster.....

@Lullu87 – of course you can modify the source of the PDF, your InDesign file, export again and update the links in the 23x23 cm sized InDesign file.
But we have alternatives for that workflow:
1. Place InDesign files instead of PDFs (yes, that is working!)
[RECOMMENDED]
2. Alternative Layouts with Liquid Layout Rule "Size" (CS6 and above)
[NOT SO RECOMMENDED]
What I like to rule out is the Alternative Layout feature with Liquid Layout rules for sizing the contents page wide.
There are some good reasons not using that feature:
a. If using align to baseline grid in your paragraph styles: The scaled text will align to the grid also on the scaled pages. And that's nothing you really want. Baseline Grid is a feature that is document wide and not restricted to single pages or sections like Alternate Layouts.
b. IDML problems with the option "Scale" for pages, if you are using single-sided documents.
Details on that here:
https://forums.adobe.com/thread/1477817
3. Using a ExtendScript(JavaScript) to scale the contents (without beeing hit by the baseline grid issue)
[HIGHLY EXPERIMENTAL – SOME RISK INVOLVED]
Just for the sake of completeness what you are able to do, not recommended for every case and highly experimental. Read the disclaimer there. And do not try it on your original document but on a saved copy!
Marc Autret
TotalRescale | Last-Minute Layout Adjustment
http://www.indiscripts.com/post/2011/12/total-rescale-last-minute-layout-adjustment
Before using it you have to change the margins, after using it you have to change the page sizes with the Pages Tool for achieving what you want.
Try this scripting solution it in your spare time ;-)
Uwe

Similar Messages

  • How can I erase the residual background text and images from the backside of a scanned page?

    How can I erase the residual background text and images from the backside of a scanned page?
    Also, I wanted to know what each subscriptions included as far as my question above is concerned?
    I am trying to edit a scanned page (pdf file) by changing some words and erasing the background from the page that is showing through it since the paper is so thin and want to know which subscription to buy in order to complete these tasks?

    This cannot be done in Reader. I think you will need software like Photoshop. You may be able to get buy with Photoshop Elements, but I haven't used recent versions of that software. Using either software this will not be an automated task.

  • Paste selected text AND images from a webpage to Pages/Word?

    I'm a new Mac user (also running virtual Windows XP via vmware fusion), and I know next to nothing about my Mac. Please bear with me if this is something that has been answered (I looked, but didn't find a specific answer for my question...it may be here, but I can't find it).
    On a Windows-based PC, all I need to do is select, copy, then paste into a Word document. All text and images would paste. I can't seem to figure out how to do that in Pages or Word (have MS Office for Mac, too).
    Thanks for any help.

    I suppose I was hoping I could do on my Mac, what I did on my Dell...that doesn't appear to be the case.
    Specifically, I'm talking about clicking/dragging to select what I want (including images), opening a Word document then pasting everying, including ALL selected images. More specifically, at sites with game walkthroughs. I prefer to save them to a document and refer to them offline, if I need to. I actually tried it at 2 different sites (one that hosts their own images and one that does not), with the same results.
    While I was waiting for a response (thank you, so much, by the way), I tried again and actually managed to get the first 3 images (of 60+) to paste into Word. There were blank places in Word, but the invisible images were clickable. In Pages, only the text pasted.
    Tried it every which way, but Sunday, LOL, and nothing worked. If it can't be done on my Mac, then I'll just keep using my Dell (I knew there was a reason I decided to keep it) for that sort of thing and then email them to myself...or try installing my MS Office '07 under virtual Windows.
    Thanks, again.

  • I want to embed text AND image from same XML file

    Hey,
    I got following problem:
    I want to put 1 image AND my text in 1 external XML file.
    I can load either one of them in seperate XML files.
    I need this because I want my content to be scrollable on my website and with this my image has to scroll with my text.
    I got following AS3 put in now:
    (ACTIONSCRIPT3.0)
    //LOADING EXTERNAL XML & IMAGE//
    var xml:XML;
    var urlRequest:URLRequest = new URLRequest("externaltext/welkom_content.xml");
    var urlLoader:URLLoader = new URLLoader();
    urlLoader.dataFormat = URLLoaderDataFormat.TEXT;
    urlLoader.addEventListener(Event.COMPLETE, urlLoader_complete);
    urlLoader.load(urlRequest);
    function urlLoader_complete(evt:Event):void {
        xml = new XML(evt.target.data);
        welkom_content_text.text = xml.toXMLString();
    //LOADING EXTERNAL PICTURES//
    var xmlData:XML=new XML();
    var pHeight:Number = 200;
    var pWidth:Number = 200;
    var listLoader:URLLoader = new URLLoader( new URLRequest("externaltext/testxmlimage.xml") );
    var picLoader:Loader = new Loader();
    listLoader.addEventListener(Event.COMPLETE, gotList);
    function gotList(evt:Event):void {
       var xmlData:XML = XML(listLoader.data);
       var numImages:Number = xmlData.pix.length();
       var stImage:String = xmlData.image
    picLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, gotPic);
    picLoader.load( new URLRequest(stImage) );
    listLoader.removeEventListener(Event.COMPLETE, gotList);
    function gotPic(evt:Event):void {
    var thisBmp:Bitmap = Bitmap(evt.target.content);
    thisBmp.x = 0;
    thisBmp.y = 0;
    var thisWidth:Number = thisBmp.width;
    var thisHeight:Number = thisBmp.height;
    thisBmp.scaleX = pWidth/thisWidth;
    thisBmp.scaleY = pHeight/thisHeight;
    addChild(thisBmp);
    picLoader.contentLoaderInfo.removeEventListener(Event.COMPLETE, gotPic);
    (/ACTIONSCRIPT3.0)
    And my XML file for the text content is as following:
    (XML TEXT FILE)
    <?xml version="1.0" encoding="utf-8"?>
    .... ALL OF MY CONTENT
    (/XML TEXT FILE)
    And for my image the XML file is as following:
    (XML IMAGE FILE)
    <?xml version="1.0" encoding="utf-8"?>
    <imagelist>
    <image>externaltext/testpicxml.jpg</image>
    </imagelist>
    (/XML IMAGE FILE)
    Does anyone know how to fix this and how to do it?
    Thanks in advance!
    Every help is appreciated!

    Thanks!
    And again... I'm doing some things wrong.. I feel dumb!
    Trying to make a website in ASP.NET almost whole day, so my head isn't set to AS3 at all..
    My code now to embed XML looks like:
    var xml:XML = new XML();
    var XMLURL:String = "externaltext/welkom_content_pic.xml";
    var myXMLURL:URLRequest = new URLRequest(XMLURL);
    var myLoader:URLLoader = new URLLoader(myXMLURL);
    var page:Sprite = new Sprite();
    myLoader.addEventListener("complete", urlLoader_complete);
    function urlLoader_complete(evt:Event):void {  
    addChild( page );
    page.addChild( welkom_title_text );
    page.addChild(  welkom_content_text );
    page.addChild(  welkom_image_holder );
    xml = new XML(evt.target.data);   
    welkom_title_text.text = [email protected]();   
    welkom_content_text.text = xml.item.toString();       
    //use URLLoader to load the image from the path [email protected]()
    Probably set some things wrong..
    And what exactly do I have to set to load my image with it?
    We were all a beginner once.. but I'm the uber annoying beginner I think... hehe
    I probably won't be answering untill thursday, because I got a day off, so..
    Thanks!!!!!!!!!!!!!!!!

  • How to set up the interaction between InDesign CS6 8.0 and Photoshop CS 6 - if Photoshop is installed and the 64 and 32-bit?? default InDesign refers to the 64-bit version of Photoshop and scripts do not work.

    how to set up the interaction between InDesign CS6 8.0 and Photoshop CS 6 - if Photoshop is installed and the 64 and 32-bit?? default InDesign refers to the 64-bit version of Photoshop and scripts do not work.

    Nice of you to point it out here as I at least don’t follow Mr.Nash’s blog regularly.

  • I am trying to convert an Illustrator cs6 file to a PDF and every time I do it, I lose all text and images. Can someone provide some assistance? Thank you!

    I am trying to convert an Illustrator cs6 file to a PDF and every time I do it, I lose all text and images. Can someone provide some assistance? Thank you!

    It's always a good idea to supply platform and AI version info.
    How are you "converting" the file? Are you choosing "Save As" and selecting PDF from the file format options? This will bring up additional save options. I would suggest "Illustrator Default" setting unless you have specific needs.

  • InDesign CS6 Std working and accessing ID files over WAN.

    Could you please share experiences Windows 7 64 bit InDesign CS6 Std opening and working with 100-120MB files over public ISP WAN using VPN?
    Right now  very often we experience unresponsive screens of CS6, while nothing happens during 10 minutes and ID needs to be closed from Task manager.
    Usually this is a result of some action, ID button or mouse click.
    Background is, that enterprise has a central InDesign file depository, where ID files can be accessed and worked with from different countries.
    While transfer speed of our local ISP is 20/10 Mbit, depository side server real life bandwidth and server access speeds are variable and unknown.
    Is there some option to set up in local PC, which could improve performance over WAN?

    I agree with Bob. For best performance, I'd recommend copying the files locally if possible. Although it's very common to work over a LAN, I beleive that Adobe's official policy is that they don't support working over a network. What this means is that if you call Adobe support with a problem, they'll have you copy the file locally. If that solves the problem, they're done. This is their way of avoiding network troubleshooting for hundreds of different types of servers.

  • Can I use InDesign cs6 to open and work with PM6.5 files?

    Can I use InDesign cs6 to open and work with PM6.5 files?

    Lrak wrote: "It sounds like I should to that before endeavoring to transfer the manuscript?" (re-link)
    It should be much easier to re-link in the Pagemaker file, as, with any luck, you can get the filenames from the Graphics Manager.  After conversion to InDesign, any out-of-date linked images get their names converted to something like "image 123.jpg", and are themselves converted to an embedded low res representation of the image.  Even vectored art.  Pretty hard to figure them out, unless you are VERY familiar with the file, which you may be.
    It may be that any cropping gets lost, too?  I do prepress work, we do some set up for our customers, but most comes in pretty much ready to go, so I don't often have to did too deep into fixing such issues. On the other hand, any problem that can happen has probably crossed my desk, or it seems that way some days!

  • Box containing text and image (fit frame to contents).

    Hi all,
    The best way I can describe what I am trying to achieve is to show you a picture.
    So essentially, I'm looking to create a grey box, containing some text with an image floating to the right hand side. I want about 2mm space (padding) inside the grey box so no content goes right to the edge and I want the text to wrap around the image. The bit I'm finding tricky is when I go to use the 'Fit frame to content' option. I'm trying to remove the space indicated by the red arrows but if I anchor the image inside the text frame, the grey box shrinks to the height of the text and the image overflows.
    This would be incredibly simple to achieve on the web, am I doing something wrong?
    Any help/direction would be greatly appreciated.

    Sorry, been out for an hour.
    I understood that you want to have some variable height text frame (the gray box), and that this box should reduce in height to fit the text contained therein, but not  less than necessary for the bottom to be 2mm below the bottom edge of the variable height image (which I'm presuming is anchored to the first line of text in the frame) in a case where there is not sufficient text for fit frame to content to avoide making the frame shorter than the bottom of the image.
    I believe this could be scripted, but that will still require you to run the script. You should ask over in InDesign Scripting
    As far as a container that holds both text and image frames, yes, but only if you "paste into" a new frame after creating the two separately and grouping, which probably is not what you have in mind.

  • Drag and drop the text and image

    Hi,
    I need help in drag and drop text and image.
    I am able to drag and drop the text and image in doc but  i want to drag the text in text frame and image in image frame only.
    For this how to get textframe id or is there any other way to do this. Pls help me if anyone know how to do this one.
    Thanks
    Arun

    This thread is pretty old, but this can help anyone in the future:
    To handle a drop in InDesign, you have to implement your own custom CDragDropTargetFlavorHelper. You can find a working example in SDK Sample. Take a look at BasicDragDrop.sdk project in the SDK.

  • The latest Firefox version won't expand to make text and images more visible on my 32" screen, although I have tried to adjust the advanced Windows appearance settings in the same way that has worked in previous versions of Firefox.

    Normally I have had to go to Control Panel; Appearances and Themes; Display; Settings; Advanced; Custom; and then I adjust the Customize Setting to 155% (149 dpi). I have hit on this setting through trial and error; larger and icons like the cursor get big and fuzzy. Smaller than 155% and text and images are tiny on the 32" wide screen. This time that procedure doesn't seem to work. The text and images remain too small regardless of setting, although the cursor icon gets big. I can manually zoom the pages, but that is clumsy and has to be redone. Does anyone know of an easy setting fix? I am not too smart about this stuff--mostly trial and error, but I do want to be able to enjoy my wide screen. Thanks!

    Normally I have had to go to Control Panel; Appearances and Themes; Display; Settings; Advanced; Custom; and then I adjust the Customize Setting to 155% (149 dpi). I have hit on this setting through trial and error; larger and icons like the cursor get big and fuzzy. Smaller than 155% and text and images are tiny on the 32" wide screen. This time that procedure doesn't seem to work. The text and images remain too small regardless of setting, although the cursor icon gets big. I can manually zoom the pages, but that is clumsy and has to be redone. Does anyone know of an easy setting fix? I am not too smart about this stuff--mostly trial and error, but I do want to be able to enjoy my wide screen. Thanks!

  • How can i copy line with text and image to ms word

    When I insert an image in textflow using InlineGraphicElement it works, but when I copy the line with the image to MS Word it copies only the text (not the image).
    How can i copy the image to MS Word?

    If you want copy formatted text and image to MS Word, you need to give MS Word rtf markup, because Word can recognize rtf markup but not TLF markup.
    So you need to create a custom clipboard to paste a rtf markup. It's a large feature for you, because you need a tlf-rtf converter in your custom clipboard.
    TLF Custom Clipboard Example:
    package
        import flash.display.Sprite;
        import flash.desktop.ClipboardFormats;
        import flashx.textLayout.container.ContainerController;
        import flashx.textLayout.conversion.ITextImporter;
        import flashx.textLayout.conversion.TextConverter;
        import flashx.textLayout.edit.EditManager;
        import flashx.textLayout.elements.*;
        import flashx.undo.UndoManager;
        // Example code to install a custom clipboard format. This one installs at the front of the list (overriding all later formats)
        // and adds a handler for plain text that strips out all consonants (everything except aeiou).
        public class CustomClipboardFormat extends Sprite
            public function CustomClipboardFormat()
                var textFlow:TextFlow = setup();
                TextConverter.addFormatAt(0, "vowelsOnly_extraList", VowelsOnlyImporter, AdditionalListExporter, "air:text" /* it's a converter for cliboard */);
            private const markup:String = '<TextFlow whiteSpaceCollapse="preserve" version="2.0.0" xmlns="http://ns.adobe.com/textLayout/2008"><p><span color=\"0x00ff00\">Anything you paste will have all consonants removed.</span></p></TextFlow>';
            private function setup():TextFlow
                var importer:ITextImporter = TextConverter.getImporter(TextConverter.TEXT_LAYOUT_FORMAT);
                var textFlow:TextFlow = importer.importToFlow(markup);
                textFlow.flowComposer.addController(new ContainerController(this,500,200));
                textFlow.interactionManager = new EditManager(new UndoManager());
                textFlow.flowComposer.updateAllControllers();
                return textFlow;
    import flashx.textLayout.conversion.ITextExporter;
    import flashx.textLayout.conversion.ConverterBase;
    import flashx.textLayout.conversion.ITextImporter;
    import flashx.textLayout.conversion.TextConverter;
    import flashx.textLayout.elements.IConfiguration;
    import flashx.textLayout.elements.TextFlow;
    class VowelsOnlyImporter extends ConverterBase implements ITextImporter
        protected var _config:IConfiguration = null;
        /** Constructor */
        public function VowelsOnlyImporter()
            super();
        public function importToFlow(source:Object):TextFlow
            if (source is String)
                var firstChar:String = (source as String).charAt(0);
                firstChar = firstChar.toLowerCase();
                // This filter only applies if the first character is a vowel
                if (firstChar == 'a' || firstChar == 'i' || firstChar == 'e' || firstChar == 'o' || firstChar == 'u')
                    var pattern:RegExp = /([b-df-hj-np-tv-z])*/g;
                    source = source.replace(pattern, "");
                    var importer:ITextImporter = TextConverter.getImporter(TextConverter.PLAIN_TEXT_FORMAT);
                    importer.useClipboardAnnotations = this.useClipboardAnnotations;
                    importer.configuration = _config;
                    return importer.importToFlow(source);
            return null;
        public function get configuration():IConfiguration
            return _config;
        public function set configuration(value:IConfiguration):void
            _config = value;
    import flashx.textLayout.elements.ParagraphElement;
    import flashx.textLayout.elements.SpanElement;
    import flashx.textLayout.elements.ListElement;
    import flashx.textLayout.elements.ListItemElement;
    class AdditionalListExporter extends ConverterBase implements ITextExporter
        /** Constructor */
        public function AdditionalListExporter()   
            super();
        public function export(source:TextFlow, conversionType:String):Object
            if (source is TextFlow)
                source.getChildAt(source.numChildren - 1).setStyle(MERGE_TO_NEXT_ON_PASTE, false);
                var list:ListElement = new ListElement();
                var item1:ListItemElement = new ListItemElement();
                var item2:ListItemElement = new ListItemElement();
                var para1:ParagraphElement = new ParagraphElement();
                var para2:ParagraphElement = new ParagraphElement();
                var span1:SpanElement = new SpanElement();
                span1.text = "ab";
                var span2:SpanElement = new SpanElement();
                span2.text = "cd";
                list.addChild(item1);
                list.addChild(item2);
                item1.addChild(para1);
                para1.addChild(span1);
                item2.addChild(para2);
                para2.addChild(span2);
                source.addChild(list);
                var exporter:ITextExporter = TextConverter.getExporter(TextConverter.TEXT_LAYOUT_FORMAT);
                exporter.useClipboardAnnotations = this.useClipboardAnnotations;
                return exporter.export(source, conversionType);   
            return null;

  • How can i create a simple netweaver portal page that shows text and images?

    Hi,
    i have a simple question or maybe it's not so simple.
    I am completly new to SAP Netweaver 2004s Portal. At the moment i'm trying to understand the struture of the whole thing. I already know how to create roles, worksets and pages and i know how to combine the different elements so a user can acces them.
    And now i want to create a simple portal page that shows text and images. Is it possible to create such a simple page with the portal content studio? What iView do i have to use?
    (I just want to create a start page with a welcome text on it.)

    Marc
    Considering that you would any ways go ahead with complex development from this simple start page I recommend create a Web dynpro Iview for your start page (include the Iview in your page).
    For putting the contents use Netweaver Developer studio to build a simple start page application and put your static text on that Iview.
    Please go through the following log after your NWDS development is over - This will make you comfortable for further challenging work.
    http://help.sap.com/saphelp_erp2005/helpdata/en/b7/ca934257a5c96ae10000000a155106/frameset.htm
    Do reward points if this helps and let me know of you want anything more.

  • My employer and I both have iPhone 5.  We both recently updated as recommended.  Now we can no longer text each other.  I can text and receive from other iPhone users.  Any ideas??

    My employer and I both have iPhone 5.  We both recently updated as recommended.  Now we can no longer text each other.  I can text and receive from other iPhone users.  Any ideas??

    Well, that didn't work since I am already using my appleID for both FaceTime and iMessage but i did see the option to send as SMS when iMessage not available.  so I am now able to send to him  but I don't know if he can send to me.  It's a start.  It is only with his phone.  His wife has a Galaxy and they are both on AT&T and she can send and receive.  I am on sprint.  If that info helps

  • Printing text and images together on a single page (printjob)

    Hello all,
    how am I able to print both text and images on the same page (defined by one printjob), using the javax.print API?
    It seems that one printjob (one page) can have only one flavor, that is text, or GIF, or JPEG, etc. Since the majority of print jobs out there usually require text and graphics on the same sheet this seems a bit strange.
    I have resorted on creating a PDF file through the iText library, and then printing by converting to GIF (quality is significantly reduced though, not an option), or by using the Acrobat Reader command line from java (looks dangerous for batch printing). My printer does not support printing directly using the PDF flavour.
    So, I solved the problem by converting to PDF, but printing is still cumbersome. Any other ideas?
    Thank you for your time,
    Ari.

    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Maybe you are looking for