AJAB year-end closing no data
Hi,
We are running transaction AJAB for year end closing of Asset Accounting. We are trying to close fiscal year 2010.
In test run, it is showing no errors, but it is also not displaying any data. I expect it to show some information on the assets that will be affected, though no data is being shown.
What could be the problem? I noticed that depreciation may need to be recalculated (AFAR). Could this affect year-end closing?
Thanks,
Hello,
This transaction will not show you any data since it is only required for the technical purposes. While running t-code AJAB, is displaying "NO" under the "Other Error" column then it means you don't have any issues while doing the year end-Closing.
Did you make any changes to any asset after completing your depreciation run for 12 month? If yes, then it is recommended that you do run transaction "AFAR" so the depreciation will be correcting for that asset before you actually do the year end closing for Fixed Asset.
However, if you are sure that you have not made any changes to any of your assets then you don't have to recalculate the depreciation.
Thanks
Similar Messages
-
Error during Year-end closing Asset Accounting (AJAB)
Hi,
While executing transaction AJAB (year end closing AA) the system, the system issues a message "Transactions not completely periodically posted". The detailed message is AU075 "Asset balance sheet values not completely posted".
Processing the error message:
While proceeding through the error message details I checked "Define How Dep Areas Post to GL" and found that 4 depreciation areas are maintained as under:
Area/Description/ G/L/ Target Group
01/ Book dep/1 (Area posts in Realtime)/0L (Leading Ledger)
15/Income tax dep/0 (Area does not post)/ Blank
21/ IFRS/ 3 (Area posts dep only)/1F (IFRS Ledger)
Then I clicked on start APC program, which leads to transaction ASKB (Periodic Asset Posting). The transaction could not be posted as document type is not assigned for periodic posting of Asset Values in SPRO>Fin. Accounting (New)>Asset Accounting>Integration with GL Accounting>Post APC values periodically to GL Accounting>Specify document type for periodic posting of asset values.
I've got 2 queries:
1) whether year-end closing can be executed if the document type is assigned and transaction ASKB is run.
2) If the answer to first query is yes, how come the same error did not encounter in other company codes (the error occurred only in 2 company codes). I've also checked the depreciation area maintained in asset masters of the company code where no such problem was encountered and found it to be same as the company code where the problem has occurred.
Seek your expert advise to resolve the issue.
Thanks,
Vipin PatankarHi Malhar,
Thanks for your prompt reply. I understand that the issue can be resolved by assigning document type and execute ASKB. At present document type 'AF' is being used for depreciation posting, can we use the same document type for APC value posting or some other document type should be used.
I still need some more highlight on the reason for not facing the problem in other company codes.
Thanks,
Vipin Patankar -
Undo Year end closing for Asset
Hi,
I need to undo year end posting for Asset and recalculate depreciation according to the changed laws.
Is there any prerequisite/constraints to be taken care of before running OAAR(undo year end closing) and AJAB(year end closing) after required postings are done. Any other financial impact does these transactions have apart from the desired depreciation calculation?
Any help in understanding the scenario will be highly appreciated.
Regards
ShilpaHii
Difference between the two transaction code are
OAAR-undo by depreciation area
OAAQ-undo by company code.
in the first one u r only opening the depreciaiton area that is already closed.
and in later u r opening whole company code
Yes after the new depreciation run it will be adjusted but while running u need to select repeat run in T.Code AFABN.
Through repeat run it will take into consideration the changed values and again calculates the depreciation.
so values will be adjusted.
Thanks
sejal -
Hi ,
We are facing issues in year end closing when executing t code AJAB.When spool is checked it gives the asset no with error message as asset is incomplete.
When analysed the error using T code AUVA, it states that some field is incomplete, may be based on screen layout settings for asset master data assigned to asset class.When the asset was created , screen layout may be different from what is assigned now. When asset is checked in change mode , it doesn't show that any contents needs to be filled. So asset doesn't seems to be incomplete.
Is there any note or any pointer to solve this error.It basically relates to 2-3 asset class related asset master data.
Regards,
Manish GargHi,
Please check Note 606736 - Flds in deactivated dep.area result in "incomplete" asset and Related Notes
510356 - AS02: deleting incompleteness indicator
436353 - Incorrect assets displayed by RAUNVA00
or
Note 699477 - Incomplete fixed asset in ANLH and ANLC fields
if they help.
Rgds. -
Dates for doing Year End Closing and in which client
Hi,
I have some doubts with Year End Closing Activities.
1. Mine is an India Company following a non calendar year and period. Which date I should do the Year End Activities.
2. Which activities should be done on Production server directly and which one to be done in Development and Quality. Kindly list the activities.
Please advice.Hi
The following are to be done before 31-03-2014 only upto sl no.7.
1. Document Number ranges copy to a fiscal year: OBH2
2. Internal Number ranges for challans : J1INUMBER
3. Witholding TAx certificates : J1INCT need not be necessary now since
we have to issue certificates by downloading the data from IT site.
4. If you have excise maintain the number ranges for the following objects:
Objects
Object Description
J_1I57FC
57FC Number Range Object
J_1IARE1
ARE1 Doc No object based on Series Group
J_1IARE1
ARE3 Doc No object based on Series Group
J_1IBOND
Excise Bonding: Bond number object
J_1ICERT
Withholding Tax Certificates (India)
J_1ICHLNNO
Internal number range for challans
J_1ICONPLA
Consolidated PLA serial no. generation
J_1IDEPINV
Excise Invoice Number for Depot Invoices
J_1IEXCEXP
Export excise invoice number range
J_1IEXCINV
Excise invoice number
J_1IEXCLOC
Local excise invoice numebr range
J_1IEXCTST
Excise invoice with intervals
J_1IEXINEX
Excise invoice number for export
J_1IINTNUM
Internally document number to be generated
J_1IINTPR2
Despatch serial number
J_1ILIC
Excise Bonding: License number object
J_1IPLA2
PLA part II number range object
J_1IRG1
RG1 Number range object
J_1IRG1_T
No. Range for RG1 - Excise group / Material
J_1IRG23A1
RG23A part 1 no. range object
J_1IRG23A2
RG23A part II number range object
J_1IRG23C1
RG23C part I number range object
J_1IRG23C2
RG23C part II number range object
J_1IRG23D
Folio Numbers for RG 23D
5. If you have Plant Maintanance also, ensure wage rates are maintained
for activity/cost center combination in KP26, if you are tracking wage
cost as secondary cost element.
6. Ensure maintaining the version else sometimes your Payroll also may not work.
7. S_ALR_87003642 - Open and Close Posting Periods
8. After Board meeting and when the Balance Sheet is approved you do the rest viz.,
FAGLGVTR, F.07
9. Asset Accounting related transactions can even be done after 1st April.
The above would be carried out naturally in Production client. Since we would be posting certain transactions in testing clients also it is advisable to do the above in testing clients also.
Regards, -
Year-End Closing Asset Account - AJAB
Hi,
While executing year end closing for fiscal year 2005, system gives following error message :-
"Depreciation not posted completely"
Since, there is unposted planned depreciation in period 12 / 2005, system is not allowing to close the year.
But since the financial year 2005 has already been closed, we can not open it back due to other legal issues and financial impacts, user wants to have any other work around solution to close the year 2005 without posting the depreciation.
Please send us your ideas or expert comments.
Thanking you in advance.
Thank You & Best Regards,
Naresh B. PandyaHi,
At last we opened FI Year 2005.
We run the depreciation for 12/2005 (31/03/2006), posted depreciation reversal entry on 31/03/2006 to nullify effect on B/s and P&L account and the same was reversed on first day of next fiscal year i.e. 01/04/2006.
Regards,
Naresh -
hi...
pls tell me t.code for following List for FI Year End Closing
1 Execute Report for InterCompany Activity & Journal Entries
2 Open posting period for next yr
3 Run Business Area's Assignment report.
4 Review list of recurring journal entries
5 Execute Recurring Entries for A/R, A/P, G/L
6 Process Parked A/R, A/P, G/L accounting documents
7 Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire
8 Run Depreciation in Test Run and post
9 Verify Display Log for Depreciation Test Run
10 Capitalize AUC Assets if needed
11 Enter Payroll Data to SAP
12 Verify Depreciation Balances with GL balances
13 Post Depreciation
14 Execute Asset History Report, and retire assets if needed
15 Adjust specific depreciation areas if necessary
16 Reconcile AM subledger with GL
17 Check Bank Data
18 Review AR Open Items
19 Review AP Open Items
20 Execute Pending Invoices
21 Clear Open Item for GRIR, freight
22 Reconciliation of Financial Documents and transactional figures
23 Open new CO Posting Period
24 Compare current (cost estimates) with last current price (Moving Avg)
25 Update current cost price to material master price field.
26 Process Freight charges, Match SD freight to actual
27 Review Internal Order Postings
28 Settle All Orders
29 Verify All Post Goods Issue have been Invoiced (Billing Due List)
30 Review SD Billng Doc from prior mth that have not yet been released to accounting
31 Reconciliation of MM movements in Transit Intra-SAP to NonSAP
32 Reconcile PI Inventory with SAP
33 Perform Manual Adjustment if needed
34 Verify balance of the GR/IR account
35 Post Accruals and Deferrals
36 Clearing of Cancelled Documents
37 Check Profitability Segment Adjustment
38 Aging Report-Reconcile GL balances with subledger balances AP
39 Check the check run numbers
40 Bank reconciliation Data
41 Enter Tax Journal Entry
42 Reconcile GL balances with subledger balances AR/MM/AP
43 Display Balance Sheet Adjustments
44 Post Balance Sheet Adjustments
45 Post Foreign Currency Valuation (foreign exchange)
46 Check generic cost centers for posting with wrong accounts
47 Correct wrong postings on generic cost centers
48 Check Validation dates for Cost Centers, Cost Elements, CO area
49 Check COGI--for both month end and year end
50 Doubtful receiviables
51 Verify In-transist Inventory
52 Reconcile PA to G/L
53 Post Cost Centre Assessments and Distributions
54 Run CO-FI Reconciliation to balance
55 Run BW reports P&L and Balance Sheet
56 Maintain CO yr variant
57 Fiscal Yr Balance carryforward AP/AR/AM
58 Fiscal Yr Balance carryforward CO
59 Fiscal Yr balance carryforward FI
60 Fiscal Yr balance carryforward PCA
61 Set Document number ranges - FI - new year
62 Set Document number ranges AP/AR - new year
63 Generate Financial statement Reports
64 Change Fiscal Year For Assets
65 Year end Closing-- Asset Accounting--final for year end
66 Close CO Posting Period
67 Close Prior A/R Posting Period
68 Close Prior A/P Posting Period
69 Close Prior MM Posting Period
70 Reverse accruals and deferrals for the new month
71 Reconciliation of Financial Documents from old fiscal year and new fiscal year
72 Load Balances, Budget Data for Cost centers, sales
73 Update Retained Earning Account , balance carry fwd
Thanks & Regards
Rekha SharmaHi,
Please check this
1 Execute Report for Inter Company Activity & Journal Entries
2 Open posting period for next yr (T.Code: OB52)
3 Run Business Areau2019s Assignment report. (T.Code: F.50)
4 Review list of recurring journal entries (T.Code: FBD3)
5 Execute Recurring Entries for A/R, A/P, G/L (T. Code: F.14)
6 Process Parked A/R, A/P, G/L accounting documents (T.Code: FBV0)
7 Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire (T.Code: ABUMN)
8 Run Depreciation in Test Run and post (T.Code: AFAB)
9 Verify Display Log for Depreciation Test Run (T.Code: AFBP)
10 Capitalize AUC Assets if needed (T.Code: AIAB, AIBU)
11 Enter Payroll Data to SAP (T.Code: CAT2)
12 Verify Depreciation Balances with GL balances ( T.Code: ABST2)
13 Post Depreciation (T.Code: AFAB)
14 Execute Asset History Report, and retire assets if needed (T.Code: S_ALR_87011963, ABAVN)
15 Adjust specific depreciation areas if necessary (T.Code: ABCO)
16 Reconcile AM sub ledger with GL (T.Code: ABST2)
17 Check Bank Data (T.Code: S_P99_41000212)
18 Review AR Open Items (T.Code: FBL5N)
19 Review AP Open Items (FBL1N)
20 Execute Pending Invoices(T.Code: MRBP)
21 Clear Open Item for GRIR, freight (T.Code: F.13)
22 Reconciliation of Financial Documents and transactional figures (F.03)
23 Open new CO Posting Period: (T.Code: OKP1)
24 Compare current (cost estimates) with last current price (Moving Avg) ( T.Code: OKBH)
25 Update current cost price to material master price field (T.Code: CK11N, CK24)
26 Process Freight charges, Match SD freight to actual (T.Code: V-31)
27 Review Internal Order Postings(T.Code: OKSA)
28 Settle All Orders (T.Code: KO88)
29 Verify All Post Goods Issue have been Invoiced (Billing Due List) (T.Code: VF04)
30 Review SD Billing Doc from prior month that have not yet been released to accounting (T.Code : F.2D)
31 Reconciliation of MM movements in Transit Intra-SAP to Non SAP
32 Reconcile PI Inventory with SAP (T.Code: MI07)
33 Perform Manual Adjustment if needed (T.Code: F-02, FB50)
34 Verify balance of the GR/IR account ( T.Code: MB5S)
35 Post Accruals and Deferrals (T.Code: FBS1)
36 Clearing of Cancelled Documents (T.Code: F-03, F-32, F-44)
37 Check Profitability Segment Adjustment (T.Code: KISR)
38 Aging Report-Reconcile GL balances with sub ledger balances AP ( T.code: FBL1N, FBL5N, FBL3N)
39 Check the check run numbers (T.Code: FCH1, FCHI)
40 Bank reconciliation Data (T.Code: FF67 & FEBA)
41 Enter Tax Journal Entry (T.Code: FB41)
42 Reconcile GL balances with sub ledger balances AR/MM/AP ( T.Code: F.03)
43 Display Balance Sheet Adjustments (T.Code: F.5F)
44 Post Balance Sheet Adjustments (T.Code: F.5E)
45 Post Foreign Currency Valuation (foreign exchange) (T.Code: F.05)
46 Check generic cost centers for posting with wrong accounts
47 Correct wrong postings on generic cost centers
48 Check Validation dates for Cost Centers, Cost Elements, CO area (T.Code: GGB0)
49 Check COGIu2013for both month end and year end
50 Doubtful receivables (T.Code : F104)
51 Verify In-transit Inventory
52 Reconcile PA to G/L (T.Code: KE5U)
53 Post Cost Center Assessments and Distributions (T.Code: KSU5 & KSV5)
54 Run CO-FI Reconciliation to balance (T.Code: KALC)
55 Run BW reports P&L and Balance Sheet
56 Maintain CO yr variant (T.Code: KCRQ)
57 Fiscal Yr Balance carry forward AP/AR/AM (T.Code: F.07,
58 Fiscal Yr Balance carry forward CO (T.Code: CXS1)
59 Fiscal Yr balance carry forward FI ( T.Code: F.16)
60 Fiscal Yr balance carry forward PCA (T.Code: 2KES)
61 Set Document number ranges - FI - new year (T.Code: OBH2, OBA7)
62 Set Document number ranges AP/AR - new year (OBA7)
63 Generate Financial statement Reports ( T.Code:OB58) OR (T.Code: FSE2)
64 Change Fiscal Year For Assets (T.Code: AJRW)
65 Year end Closingu2013 Asset Accountingu2013final for year end (T.Code: AJAB)
66 Close CO Posting Period : (T.Code: OKP1)
67 Close Prior A/R Posting Period ( T.Code: OB52)
68 Close Prior A/P Posting Period (T.Code: OB52)
69 Close Prior MM Posting Period (T.Code: OMSY)
70 Reverse accruals and deferrals for the new month (T.Code: F.81)
71 Reconciliation of Financial Documents from old fiscal year and new fiscal year ( T.Code: FNSL)
72 Load Balances, Budget Data for Cost centers, sales
73 Update Retained Earning Account , balance carry fwd (T.Code: F.16)
Regards, -
Back up plan for Asset year end closing
Hi,
Do you have any back plan prepared for Asset year end closing especially t.code AJRW and AJAB (running this in Background).
what back up plan we should recommend if it fails for already happened activities.
Regards
ShanuHi Shanu,
there is a Test-run modus.
If it fails for some reasons, you will get a error message. Then you solve this error and repeat AJRW or AJAB.
regards Bernhard -
Hi
I have an issue in year end closing. What would be effect if i do not clear the open items in GR/IR Account as part of year end acitivity. The balance in my GR/IR Account is zero as of my balance sheet date.
What would happen if i run the balance carry forward program?
Regards
Sanil BhandariThis program will reclassify the entries for the Balance sheet reporting. Since your balance is zero there should not be any impact on the reporting side. Whether you run this program or not it will not have any impact on the balance carry forward program. Since these entries will get reversed at the beginning of the next period in any case.
The config setting will be in OBYP
The following config document may help you in better understanding.
Define Adjustment Accounts for GR/IR Clearing
The goods receipt/invoice receipt (GR/IR) clearing account is posted to whenever you receive goods that have not been invoiced yet or whenever you receive invoices for goods that have not been delivered yet.
In this activity you define the numbers of the adjustment and target accounts for the automatic postings for the GR/IR clearing account.
Transfer postings have to be made at the balance sheet date to reflect the goods invoiced but not delivered and the goods delivered but not invoiced. The program that analyzes the GR/IR clearing account adjustments this account by posting any outstanding amounts to an adjustment account. It makes the offsetting entry to the account for goods delivered but not invoiced or to the account for goods invoiced but not delivered (target account).
Edited by: Sivakumar Gopalakrishnan on Jan 15, 2008 4:11 PM -
Program RFSUMB00 year end closing in Italy.
Hello All,
I am setting up all the configurations for year end closing in Italy using program RFSUMB00. Here i need some clarification on the below points.
1. dummy vendor / customer master needs to be created for each recon account. here i would like to know whtr we need to create a dummy recon account for dummy vendor / custome? if no, how would postings be happen.?
2. we need b/s opening and closing accounts for this prog. I would like to know wht entries will happen at the year end and whtr all b/s closing postings will happen to same account?Hi,
I hope dummy accounts are not required. Please try as below. For balance sheet closing and opening accounts you can use technical accounts which we use for initial balance uploading. This program will generate one closing entry and one opening entry with the help of technical account what I have mentioned so that the balances will become ZERO in previous FY.
Closing entry happens in previous fiscal year and opening entry will posted in current FY.
Please go for FAGL_IT_02 - Italy (New). Do not go for F_IT_01 - Italy. There are some prerequisites before executing this program.
Please close normal periods of previous fiscal year and ensure that special periods of previous fiscal year are opened. Means special periods should be available for postings.
Closing postings should happen in special periods. Try with 14th period.
I suggest to run this program only in L1 ledger as this only legal requirement.
Below is for your reference where July to June Fiscal year is maintained.
P&L Account 550016 (result of PNL account)
Net Result Account 101001 (Retained earning account)
Balance Sheet Account- Closing 800005 (Technical account)
Balance Sheet Account- Opening 800005 (Technical account)
Parameters for closing postings:
Document Type UE
Posting Date 30.06.2013
Document Date 30.06.2013
Posting Period 14
Parameters for opening postings:
Document Type UE
Posting Date 01.07.2013
Document Date 01.07.2013
Posting Period 1
Try with above inputs. I hope it will resolve your issue. I have resolved in the same way in our project for Turkey.
Regards
Anand -
Cannot execute year-end closing in IDES R/3 4.71
Hi Gurus,
I am working with IDES R/3 4.71.
since the current fiscal year in system in 2003, i try to change the fiscal year to 2004, then 2005, ..., finally I wish to get fiscal year 2009.
during the procedure, i need to post AA depreciation for each period of 2003. I have done that successfully with AFAB. then I also successed with Change Fiscal Year to 2004. now I need to execute year-end closing for 2003. but the system reports errors.
error message like below:
=========================================================
Asset balance sheet values not completely posted
Message no. AU075
Diagnosis
In company code 1000, which is to be closed, APC values have not been posted to Financial Accounting for all relevant depreciation areas.
Depreciation area 03, at least, is set up for periodic posting of APC values.
The year-end closing checks if documents were posted that have an entry date after the last run of the program for periodic posting of APC values. If such documents are found, the system issues this message.
Procedure
Check which depreciation areas are supposed to post APC values periodically to Financial Accounting according to their Customizing definitions (indicator: "Post assets periodically in General Ledger")
See the Define How Depreciation Areas Post to General Ledger IMG activity.
Start the program for posting APC values. In the Asset Accounting main menu, choose Periodic processing . Start this program in update mode, regardless of whether or not documents are displayed in test mode, or if a message appears stating that there are no documents to be posted.
Start APC Posting Program
==================================
I didn't change the depreciation area provided by IDES group.
anybody knows what's wrong?
many thanks!
GeorgeGeorge,
The long text seems to be self-explanatory. IDES comes with pre-configured stuff. So for sake of training they may have designated some depreciation areas as periodic posting. Please follow the instructions in the message and try to resolve it.
If I were you:
a) I would find out the chart of depreciation for the company code you are trying to do a fiscal year close.
b) Then go to the configuration and see the definition of each depreciation area.
c) For those which have periodic posting of depreciation, run the corresponding program as instructed in the long text.
Regards,
Vishal. -
Change fiscal year to 2006 in Asset Management : error in year-end closing
SAP version: 4.0B
Transaction Codes used: Year-end closing AJAB, Fiscal year change AJRW
We are trying to change the fiscal year to 2006 in Asset Management.
I tried to change the fiscal year to 2006 for the company code 0055 using transaction code AJRW. The test run has displayed an error message Fiscal year change in co. code 0055 1 possible only after year-end closing 2004 2.
I have used the transaction code OAAQ to find the out the fiscal year, the closing for depreciation area is successfully performed.
Unfortunately it is still showing 2003 which should have been 2004 for company code 0055.
I tried to close the fiscal year 2004. The test run has completed successfully. I have scheduled the RAJABS00. The program has executed successfully with no errors or warnings.
The closing for depreciation area (Transaction OAAQ) is still showing 2003 for company code 0055, which should have been changed to 2004.
I am new to Asset Management. Can you please give some suggestions on how to fix the problem and change the fiscal year to 2006.
Thank you,
VidyaHi,
Thank you very much for your prompt reply.
I have used transaction OAAR to check if any area is still open for previous years.
Surprisingly! The areas are closed only till 2003.
Can you please let me know what to do (transaction codes - programs) to close the areas for fiscal year 2004.
I am new to Asset Management. I think you are good in Asset Management. Can you please give some suggestions on how to close the fiscal year 2004.
Can you please let me know if I have to run any other transactions other than closing the areas before running the transaction to close the fiscal year 2004.
Thank you very much.
Sincerely,
Vidya -
Hi
One of our group companies are facing the issue below.
*. When trying to run any asset transaction the error message "Fiscal year change in co.code J002 possible only after year-end closing 2008" . We are currently in 2010 in financial accounting.
AJRW -Change to new FY 2009 was successful, but for 2010 the same error msg above is displayed.
*AJAB -FY close
- 2008 : The planned depreciation was not completely posted to Financial Accounting for asset 000000300090-0000 in company code J002 in depreciation area 01.
When I check AW01N, there is a planned depreciation amount for 2008 period 12. However, depreciation has been completed for 2009. If I try to a repeat run for 2008 in test mode there is a value coming up. The issue is posting periods are close. Current financial period is in 2010.
Your assistance is greatly appreciated.
Thanks
NadiniThe following are the important steps you must keep in mind while closing asset accounting.
1. Recalculate all asset values AFAR
2. Run program RAUNVA00
3. Run program RAANLA01
4. If you find any unposted assets in step 3 delete them if you do not want in AS06 / AS26 (group assets)
5. Update your insurance index OAV5 (if necessary)
6. Run your regular month end closing process.
7. Reconcile FI-AA with GL accounting - transaction code ABST
8. AJRW - Fiscal Year change
9. AJAB - Close fiscal year
10. reopen the fiscal year OAAQ (if only necessary)
11. Perform all year end closing steps.
Thanks,
Ravi -
Asset Fiscal Year End Closing - Depreciation not posted completely in 2010
Hi Experts,
I have an issue concerning AA 2010 year end closing, since there is one asset which depreciation in 2010 was not posted completely, meaning that we cannot close 2010 fiscal year.
This happened because of the following situation:
Vendor Incoice was posted in 30.12.2010, with a document date 31.03.2010 (meaning that for this asset the depreciation calculation start date was 01.03.2010). Then, in 30.03.2011 someone post the reversal document, with posting date 31.12.2010.
So for this asset I donu2019t have any depreciation posted in 2011 and no values in depreciation book, for the asset, meaning that even if I change the depreciation calculation start date for 01.01.2011, it will still be necessary to run depreciation in Dec.2010.
However I cannot run depreciation for this asset for 2010 because it will have impact in 2010 balance sheet, which cannot happen.
Do you have any ideas to solve this problem?
Thanks!
Best regards,
Andreia NascimentoHi,
As i have already suggested you for the [SIMILAR THREAD|Re: Asset Fiscal Year Closing not possible], which you have only posted in FI forum, there is no other alternative than running the repeat dep run for FY 2010 for period 12.
Please do not cross post your questions.
REgards,
Srinu -
Take back Year End Closing for Fixed Asset
Dear all,
Is it possible to reverse a year-end closing in Fixed Asset? If yes, how to do it and what are the consequences?
Users need to carry out some corrections for the closed year!
Thanks for your help.
Nas.Hi.
Thanks for answering. If I change it in trans. OAAQ manually, should I re-run depreciation run before running the closing transaction AJAB again?
Thanks,
Nas
Maybe you are looking for
-
How to delete file on itunes library
Hi im having a problem with my itunes library. I was messing around on Itunes and i found the "Add file to library" button and I clicked it because I wanted to move my music from my file folder to itunes and i went to sync the music and a pop up come
-
Why aren't I allowed to post in the iPad Forum?
I was allowed to post in the iPhone forum but now I'm told that I'm not allowed to post in the iPad forum! What is going on here? EDIT. Disregard; I went back and tried for the 5th or 6th time and it seems to have posted. Jive software must being act
-
Hi Theme 26 has the following issues 1. In 2 level tab the parent tabs are not visible 2. show hide region show hide button is not working 3.Feedback link not available in printer friendly page
-
Please forgive me for what may seem like a novice question, but I am a beginner. We have used live cycle to create a form based on a Word document and put it on our website as a fillable .pdf form. When a user fills out the form and clicks the "Sub
-
Unable to exit my songs....., Unable to exit my songs.....I'm stuck.. When I close GB and open it again is still on "my songs" ...what should I do?