Alarms: Misconfigured Network Device Detected

Hi,
We have 2 ISE (HA) and 2 WLC (primay Secondary) configured in our network.
In ISE i am getting this error 12929 NAS sends RADIUS accounting update messages too frequently. 
Please help!!!! :)
Regards
Jass

Refer the link for similar issue: https://supportforums.cisco.com/discussion/12194891/ise-12-error-12929-nas-sends-radius-accounting-update-messages-too-frequently

Similar Messages

  • Unsupported wireless network device detected

    Hi guys,
    I had to change the motherboard of my DV9420US; I bought a new motherboard from Megabyte Trading, the part number was the same (444002-001) and they told me it was an HP piece. However, after the technician replaced it, the following error appears when booting and forces me to shut down:
    "104-unsupported wireless network device detected. System halted. remove device and restart".
    Can anyone tell me how to fix this problem?
    It starts to be disappointing: I have already spent over 400 bucks to repair the original motherboard first and buy a new one after, with the result that my laptop does not work yet.
    Thanks.
    simone73 
    This question was solved.
    View Solution.

    Remove the wireless card and boot into the notebook. Once into windows you will have to hardwire the notebook into an internet connection and go to HP.com. Place your PN number in the search and go to the software and driver downloads find the BIOS header and download the most update BIOS and flash the BIOS for the notebook. Once this has completed replace the WLAN and boot it back up, should fix the issue.

  • My pavillion dv2410us stops at an error message 104 unsupported wireless network device detected.

    error at start for hp dv2410us stops at black screen with the next error message
    error 104 unsupported wireless network device detected. System halted. remove device a start

    Hi:
    Did you just install a wireless card?  You get that error if you install an unsupported wireless card. If you did not make any changes to your PC then I don't know what to tell you.
    Paul

  • "Warning Unsupported wireless network device detected.Please remove device and restart"

    Okay, so i went upnorth with my family and my  Lenovo 3000 c100 worked perfectly one night, the next morning I woke up and turned on my laptop and i got this message "Warning Unsupported wireless network device detected. System halted. Please remove device and restart". I've tried to boot into bios it wouldn't let me. It says to interrupt normal startup press the lenovo care button???, i'm guessing it's the wrench with a square around it located near the power button?. I have found nothing to fix this problem and i need my laptop for work tomorrow.
    Please help.
    Thank you

    The same problem hapend to me today. I just start the notebook and I'm getting the red message: "Warning Unsupported wireless network device detected.Please remove device and restart"  .
    I search the internet and I didn't found anything.  I have the same problems like you guys... very strange message  And no one knows the answers .
    Please HELP!!

  • 104 Unsupported Wireless Network Device Detected

    Opening up the computer this morning i have a message that says:   104-Unsupported wireless network device detected.  System halted.  Remove device and restart.
    There are no additional devices added or changed before putting laptop in hibernation for the night last night.  Odd.  Any suggestions?

    Hi
    In case you are comfortable reseat the Wireless card from the back panel also try to visit HP website and update the Bios for your unit and see if this fixes your issue.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • 104-unsupported wireless network device detected - yet replaced with like for like card!

    Hi,
    I am repairing a friends laptop where their wireless is no longer working.
    I ordered a new card on ebay which is the same model Broadcom BCM4311KFBG however I still get the above message.
    How is it not accepting this card? Surely it's in the whitelist? It is exactly the same card except for the original had a "P20" stamped on the chip (as well as the BCM4311KFBG model number) and this new one had "P11".
    Any help much appreciated.
    Thanks
    This question was solved.
    View Solution.

    HP6715b.
    The one on the left is for HP.
    The one on the right is for DELL.
    Both are BCM4311KFBG.
    http://www.ebay.com/itm/Broadcom-BCM4311KFBG-Mini-PCI-express-Wireless-WLAN-Wifi-Card-802-11-For-HP-...
    Ebay  $7.99 free shipping.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • HT5706 I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any help?

    I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?

    Troubleshoot the network as that is likely what is causing the issue.
    Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer.

  • Solution Centre in Win 8.1 keeps runs device detection on every use

    New Win 8.1 notebook. Connected the OfficeJet Pro 8500A A910g by USB. Windows detected and loaded printer driver, also loaded network driver as printer connected via wireless.  Disconnected USB cable. Downloaded and installed HP full software package. It went through device detection, wirless, could not find printer, gave it the IP address, it then found it OK. Went through all steps including opening an HP web page to sign up for something. It created desktop shortcut and enabled scan over network. Can scan from device to PC, works just fine. Next time I wanted to scan from PC, double click on desktop shortcut, UAC pops up, say OK can make changes. Goes through device detection agian. Eveything works. Closed Solution Centre. Re-opened it and same thing. Every time I want to use the Solution Centre I have go through teh detection process.  I tried running the .exe directly from Windows Explorer so there are no switches in the command line, no change. There must be a fix.

    Hi,
    Please try following the steps below and let me know if that helps:
    From the Control Panel go to View devices and Printers.
    Right click the HP Officejet Pro 8500A and select Remove Device, next unplug the USB,
    from the start menu's search bar type %temp%. open the temp folder and then open the newest installation folder which starts with 7z, then open the Utils folder.
    For a 32 bit OS open the X86 folder, open the X64 folder for a 64-bit OS.. follow those steps if you aren't sure about your OS type:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03666764&lc=en&cc=us&dlc=en
    Run the RemovePreinstalledDrivers file and allow it to reach 100%
    Go 2 folders up back to the 7z folder and locate the installation MSI file:
    search for *x86.msi or *x64.msi, depanding on your OS type.
    Right click the larger MSI file out of the 2 resutls, then click on Repair. if you get a prompt that it is only valid for installed software select Instal instead of repair.
    Reboot your PC if prompted to do so.
    Open the Officejet Pro 8500A software and follow the steps to reconfigure the device, then check for any difference.
    Please let me know if that helps,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • AirPlay mirroring issue "No Device Detected" with MBP2011 and ATV2

    I upgraded my MBP (early 2011) to Mountain Lion.  I have an ATV2 (v4.2.1 software).  I am trying to AirPlay mirror from the MBP to the ATV but am getting a greyed out "No Device Detected" drop down.  Both MBP and ATV2 are on the same network. 

    The issue is the "Projectors" as well (VGA projectors even DVI), Now Apple is asking all Universities, Colleges and High Schools to spend millions of Dollars to replace all their Projectors so students and professors they can install Mountain lion in order to run their presentations...Apple Mail still with BBC Bug, and many other bugs are not fixed yet because their nightmare Steve Jobs who was push on them to fix these bugs is not alive, and yes they can do anything bad to destroy Apple.
    Mountain Lion is CRAP same thing as LION, Apple is doing worse and worse until Samsung will create a good machines for Microsoft, then Steve Jobs will wake up from his grave asking the bad administration of Apple why they are destroying it with such CRAP!!
    check this out:
    http://gizmodo.com/5782611/samsung-series-9-laptop-is-thinner-lighter-and-offici ally-more-expensive-than-the-macbook-air

  • SCOM 2012 Alerts for Ping Network Device

    Hi
    I have SCOM 2012 and configure Rule for Ping my Network Device.
    My question is, How to Configure Alert for send mail when timeout is detected on Rule?. Step by step documentation? I see tab Alerts on the monitor but Generate Alerts option is greyed out. 
     thanks.

    More info:
    How to test email notification settings in Operations Manager
    https://support.microsoft.com/kb/934756?wa=wsignin1.0
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • 13017 Received TACACS+ packet from unknown Network Device or AAA Client

    I am adding new routers to our Corporate network for a new MPLS network.  I am getting 13017 Received TACACS+ packet from unknown Network Device or AAA Client  errors for these new routers.  They are added to ACS 5.4.0.30 correctly just like all of our other devices.  We have never had real routers on the network before, just switches and access points.  Is there something special I need to set in ACS for these to work and authenticate correctly?  I can only access the currently with built in login locally.
    One of the new router configs
    Current configuration : 2370 bytes
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname T666
    boot-start-marker
    boot-end-marker
    enable secret 5 $1$h7b3$.T2idTKb9H98BQ8Op0MAC/
    aaa new-model
    aaa authentication login default group tacacs+ local
    aaa authentication enable default group tacacs+ enable
    aaa authorization exec default group tacacs+ local if-authenticated
    aaa accounting exec default start-stop group tacacs+
    aaa session-id common
    clock timezone CST -6
    clock summer-time CDT recurring
    ip cef
    ip auth-proxy max-nodata-conns 3
    ip admission max-nodata-conns 3
    voice-card 0
    crypto pki trustpoint TP-self-signed-2699490457
     enrollment selfsigned
     subject-name cn=IOS-Self-Signed-Certificate-2699490457
     revocation-check none
     rsakeypair TP-self-signed-2699490457
    username netadmin privilege 15 secret 5 $1$SIR2$A3MpShVNeAOlTPyLZESr..
    interface FastEthernet0/0
     ip address 10.114.2.1 255.255.255.0
     ip helper-address 10.30.101.4
     duplex auto
     speed auto
    interface FastEthernet0/1
     no ip address
     shutdown
     duplex auto
     speed auto
    interface Serial0/1/0
     ip address X.X.X.X 255.255.255.252
     no fair-queue
     service-module t1 timeslots 1-24
     service-module t1 remote-alarm-enable
     service-module t1 fdl ansi
     no cdp enable
    router bgp 65065
     no synchronization
     bgp log-neighbor-changes
     network 10.114.2.0 mask 255.255.255.0
     neighbor X.X.X.X remote-as 209
     neighbor X.X.X.X default-originate
     default-information originate
     no auto-summary
    ip forward-protocol nd
    ip bgp-community new-format
    ip http server
    ip http authentication aaa
    ip http secure-server
    ip tacacs source-interface FastEthernet0/0
    no logging trap
    tacacs-server host 10.30.101.221 key 7 1429005B5C502225
    tacacs-server host 10.30.101.222 key 7 1429005B5C502225
    tacacs-server directed-request
    control-plane
    banner exec ^CC
    C
    Login OK
    ^C
    banner motd ^CC
    C
    **  UNAUTHORIZED ACCESS TO THIS SYSTEM IS PROHIBITED.  USE OF
    **  THIS SYSTEM CONSTITUES CONSENT TO MONITORING AT ALL TIMES.
    **  RUAN Transport Corporation
    **  Network Services
    **  [email protected]
    **  515.245.2512
    ^C
    line con 0
    line aux 0
    line vty 0 4
     exec-timeout 30 0
     transport input all
    line vty 5 15
     exec-timeout 30 0
    scheduler allocate 20000 1000
    end
    T666#

    AAA Protocol > TACACS+ Authentication Details
    Date :
    September 19, 2014
    Generated on September 19, 2014 10:21:27 AM CDT
    Authentication Details
    Status:
    Failed
    Failure Reason:
    13017 Received TACACS+ packet from unknown Network Device or AAA Client
    Logged At:
    Sep 19, 2014 10:21 AM
    ACS Time:
    Sep 19, 2014 10:21 AM
    ACS Instance:
    acs01
    Authentication Method:
    Authentication Type:
    Privilege Level:
    User
    Username:
    Remote Address:
    Network Device
    Network Device:
    Network Device IP Address:
    10.114.2.1
    Network Device Groups:
    Access Policy
    Access Service:
    Identity Store:
    Selected Shell Profile:
    Active Directory Domain:
    Identity Group:
    Access Service Selection Matched Rule :
    Identity Policy Matched Rule:
    Selected Identity Stores:
    Query Identity Stores:
    Selected Query Identity Stores:
    Group Mapping Policy Matched Rule:
    Authorization Policy Matched Rule:
    Authorization Exception Policy Matched Rule:
    Other
    ACS Session ID:
    Service:
    AV Pairs:
    Response Time:
    Other Attributes:
    ACSVersion=acs-5.3.0.40-B.839 
    ConfigVersionId=359 
    Device Port=59840 
    Protocol=Tacacs
    Authentication Result
    Steps
    Received TACACS+ packet from unknown Network Device or AAA Client
    Additional Details
    DiagnosticsACS Configuration Changes

  • Network Device Support Service logging errors

    The following error is logged for to six times per hour.
    The HP Network Devices Support service terminated with the following error:
    The specified module could not be found.
    XML Detail is:
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
      <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
      <EventID Qualifiers="49152">7023</EventID>
      <Version>0</Version>
      <Level>2</Level>
      <Task>0</Task>
      <Opcode>0</Opcode>
      <Keywords>0x8080000000000000</Keywords>
      <TimeCreated SystemTime="2014-08-02T03:21:54.757140700Z" />
      <EventRecordID>1447175</EventRecordID>
      <Correlation />
      <Execution ProcessID="756" ThreadID="8396" />
      <Channel>System</Channel>
      <Computer>MarvOfc</Computer>
      <Security />
      </System>
    - <EventData>
      <Data Name="param1">HP Network Devices Support</Data>
      <Data Name="param2">%%126</Data>
      <Binary>4800500053004C0050005300560043000000</Binary>
      </EventData>
      </Event
    Already having problem upgrading to Win 8.1 from 8.0 and this isn't helping.  Anyone know what I can do to stop the errors?  (This post also generated an error stating that invalid HTML was detected and removed and it was a direct copy from the Microsoft error log.)

    So what you're telling me is that it's a WINDOWS FILE that the HP Service is looking for?  When it's an HP Service that will not start, and not a windows service that won't start?   So why are the printers functioning properly, and listed in the proper places (meaning my system sees the P2015dn on the network and uses it with no problems), but the HP service is logging errors?  FYI, the only HP network device I have is the printer. 
    You'll have to explain that one before I go to the trouble of doing a full backup and a clean install of Windows 8,  then a full restore.  You're talking HOURS AND HOURS here with no gaurantee of success, and I suspect having nothing to do with the real problem of a missing file that is probably authored by HP, not Microsoft.
    It's beginning to look like you guys don't know what file it's looking for either.  If it's actually a real windows .dll file and you know which one, I should be able to extract it from the windows disk to the proper folder and register it if needed.

  • I have a "Misconfigured Network". (iPad 4th). Is there anything I can do to correct this? Thank You.

    I have a "Misconfigured Network" on my iPad 4th.  What should I do? Thank You.

    I'm hoping that it's never been jailbroke.  If it was, all bets are off.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again.  Also, if you have IOS-7, read this.

  • New Device Detected Notification

    all day long i get this New Device Detected Notification box that pops up in the lower right of my screen. It offers; check the device or remind me later. All i want to do is turn the darn thing off so i never see it again. Anyone know how to do this? i can find a way.

    There is a menu option at the top for the status of the network. If you go into this there will be a list of alerts that you can clear, which should solve the problem

  • A connection to the deployment share could not be made - Networking device did not have a driver installed

    I have a couple of HP 8200 desktops that I think might have bad nics. When I PXE boot them and start my LiteTouch, I get a Wizard error that says
    A connection to the deployment share (\\mydpshare\share) could not be made. The following networking device did not have a driver installed
    PCI\VEN_8086&DEV_1502&SUBSYS_1496103C&REV_04
    I have that driver in MDT and it works on other HP 8200s. Looking into the Wpeinit.log, it looks like the driver loads but maybe the nic is bad:
    Installing device root\kdnic X:\WINDOWS\INF\kdnic.inf succeeded
    Installing device pci\ven_8086&dev_1502  X:\WINDOWS\INF\net1ic64.inf succeeded
    Spent 16903ms installing network drivers
    QueryAdapterStatus:  no adapters found
    Spent 0ms confirming network initialization; status 0x80004005
    WaitForNetworkToInitialize failed; ignoring error
    Has anyone seen this before?
    Orange County District Attorney

    Hi,
    According to your description, it should be Intel NIC driver problem. I have checked HP official website, there is new NIC driver released, please access to the link below to download the NIC driver for test:
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5037932&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D2%257CswItem%253Dvc_111651_1%257CswEnvOID%253D4060%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
    Roger Lu
    TechNet Community Support

Maybe you are looking for