ALE config & Idocs

Hi All,
I have a requirement to Transport Idocs from XI server to ECC-R3 server(Both are Different Servers).
I need help in creation of Logical Systems, Ports and Partner Profile Creations.
Before that i have few doubts,
1. What is the Significance of "Assigning Logical Systems to Client?"
2. What is the Significance of the "Customer Distribution Models?"
Now my questions?
1. How many Logical Systems must i have in ECC-R/3? Do we need to create any LS in XI server?
similarly how many Ports and Partner profiles i need to create in both ECC and XI servers.
Actully Inbound Process runs in ECC by using a Process Code(It drives our custom FM).
Thanks in Advance,
Sekhar.J

Hi,
Lets Take everything One by One:
1. What is the Significance of "Assigning Logical Systems to Client?"
*Answer: Logical System is nothing but a Name assigned to a Client for Data Transfer, which will be used as the name of Sender or Reciever System.*
2. What is the Significance of the "Customer Distribution Models?"
Answer: CDM is generally required when you have Multiple Recievers for your IDOC, and you want to have ALE/IDOC settings for all Recievers in a central place. You achieve the concept of segment Filtering & IDOC reduction via CDM.
I need help in creation of Logical Systems, Ports and Partner Profile Creations.
*Creation of Logical Systems:It can be defined by TX code BD54. Just enter the name and description of LS.
Creation of Ports: Go to transaction WE21 to create a port which will be used for transferring the data.
Creation of Partner Profile: use Txn WE20.*
Now my questions?
1. How many Logical Systems must i have in ECC-R/3?
Only One
Do we need to create any LS in XI server? No
similarly how many Ports and Partner profiles i need to create in both ECC and XI servers.
Only One Port & Partner Profile in XI server.
Thanks,
Ajay

Similar Messages

CRM to PI outbound IDOC scenario : IDOC ALE config

Hi folks,
I have a scenario: CRM-> PI
CRM system posts an IDOC to PI,
I have done all the necessary ALE configs:
1. comm. id on PI
2. RFC Destination on CRM to PI
3. Port on CRM. we21
4.Logical SYsm on CRM
5. Partn Prof on CRM
now, when i try to push out an idoc out of CRM , it fails in CRMs TRFC queu(SM58)
with this error:
Transaction IDX1: Port SAPDX1, client 500, RFC destination contain error
I have no clue why it failed with this error.
1. No idea from where it picked up this port as well.
2. Port i created to PI was an autogenerated Port and not SAPDX1, don't knw how it picks this up.
Would appreciate any help with respect to this.
Thanks,
Hank

Also, for your reference just double check if the following steps are completed properly for outbound processing:
1.Define Logical Systems and Assign Client to Logical System u2013 Transaction SALE
2.Maintain RFC Destinations u2013 Transaction SM59
3.Define Ports u2013 Transaction WE21
4. Maintain Distribution Model u2013 Transaction BD64
5.Generate/Create Partner Profile u2013 Transactions BD82/WE20
6.Distribute Model View u2013 Transaction BD64
    -Select the Model View
     -Go to menu path Edit -> Model View -> Distribute
     -Result log will be displayed on the next screen
Hopefully it should work now.
Puneet

ALE EDI /IDOC Documents needed

Hi All,
Can any body send the ALE ,EDI and IDOC Dcouments with live examples.
My mail id is : [email protected]
Thanks and Regards,
Muralikrishna

Hi
IDOC
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
>>>> SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
Check these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
Please check this PDF documents for ALE and IDoc.
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
EDI
Electronic Data Interchange
Cross-company exchange of electronic data (for example business documents) between domestic and international business partners who use a variety of hardware, software, and communication services. The data involved is formatted according to predefined standards. In addition to this, SAP ALE technology is available for data exchange within a company.
Refer
http://www.erpgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
http://www.erpgenie.com/sapedi/index.htm
http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
EDI FLOW :
Here is some thing which helps you and here the purchase order is taken as example too..
Electronic Data Interchange, or EDI, is the electronic exchange of business data. Using a standard format, EDI provides a method of transmitting business data from one computer to another, without the need to re-key data. This electronic link can result in more effective business transactions. With EDI, paper documents such as invoices can be replaced with electronic transmissions, thus time is saved, and the potential for error is minimized. Data can be exchanged at any time. Related business expenses, such as postage, printing, phone calls, and handling, can also be significantly reduced. EDI can aid in the support of manufacturing efforts, such as Just-in-Time and Third Party Warehousing, and financial efforts, such as Electronic Payments.
What parts of the business cycle can be supported by EDI?
Any business documents that are currently exchanged using paper can be converted to an EDI. Standards. Standards include ANSI X12 and XML/EDI are primarily used in the United States, while EDIFACT is used in Europe and Asia.
How does EDI get started?
EDI gets started when one company contacts another expressing interest in trading business documents electronically using Electronic Data Interchange. The two companies must first determine each other's EDI capabilities. If you do not already know your EDI capabilities, we have prepared a questionnaire to help you determine them. If you are already EDI capable, we will coordinate with your technical staff to determine a testing plan. Upon completion of testing the EDI documents, the appropriate business personnel will set a production start date to begin the exchange of EDI business data. If you are not EDI capable, we recommend you first obtain a commitment from your upper management. Your company will need to allocate resources and capital for software, hardware, testing, possible programming, and training.
What is the flow of EDI?
The flow of EDI depends on the sophistication of your systems and your EDI software. If you have internal purchasing/order entry systems, you will need interface programs that can extract and insert data out of and into these systems. EDI programs that interface with your internal systems are preferred over software that requires re-keying of data. Embassy Software specializes in seemless interface between EDI and your back office systems. Using a purchase order as an example of a business document your customer would send that PO electronically (850) to you. It could be sent either through a VAN (Value Added Network) or through an FTP server. You would take that 850 and convert it either into and ODBC database, a flat file or XML document to be imported into your Order System with the use of EDI Software such as PassportXchange.. Using EDI communication software, which is part of the PassportXchange package you would pull down data at set intervals from the VAN or FTP. These documents are then processed through EDI translation software and output to our order entry system. Finally, an EDI document called a functional acknowledgment (997) is sent to your customer.
check this.
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.sapgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
http://www.erpgenie.com/sapedi/index.htm
http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
ALE
Application Linking and Enabling (ALE)
In this document you will learn the step-by-step procedure to setup the ALE system and go through a transaction between two clients
For our purpose we have two clients
namely Client 100 and Client 200.
System name is SAPKDC (FOR BOTH 100 AND 200 CLIENTS).
Distribution of Material Master Data Between two Systems
1) SETUP LOGICAL SYSTEM: (Note: Do Not Create This Step)
To do this follow the following steps
Execute SALE Transaction Code
On The Screen Click on Sending and Receiving Systems.
Then Click on Logical Systems.
Then Click Defining Logical Systems.
Click New Entries Button
(E.g. (LG100 sending system)
(LG200 receiving system))
Enter two logical system names and their description.
Save
Comeback to SALE Transaction Code screen.
2) Now you have to allocate the created logical systems to respective clients.( Note: Do Not Create This Step)
LG100 assign to client 100
LG200 assign to client 200
To do this, do the following.
Click Assigning Client to Logical System.
Ignore the message that comes up on the screen.
Select client 100
Click details button on the toolbar icon or press F2.
In the logical system box, enter LG100.
Click on the save Icon
Click the back button.
Now select client 200.
Click details icon or press f2.
In logical Systems box, enter LG200.
Save
Back.
Comeback to SALE Transaction Code screen.
3) Maintain RFC Destination: (TR.CODE:SM59)
(Note: Do Not Create This Step)
Click Create Button on the Screen
On the Screen Maintain RFC Destination i.e LG200.
Enter LG200 in RFC destination box.
Connection type is 3
Give a description for the RFC destination.
Maintain Technical Settings on Details on Technical Settings tab
Target Host as : SAPKDC (NOTE: Save it as a Host Name)
Maintain Logon Details on Logon/Security tab.
Language: EN.
User: MMUSER200 (This is the logon for dist.)
Client : 200
Password: MM1234.
Save.
Click on create to do the above process for Client 200 in
The client 200 system.
4) Maintain Distribution Model.(BD64). (ABAPer role starts here)
Execute Maintain distribution model directly for
creating the model.
Click on change mode button on App tool bar of the Screen.
Create Model View pushbutton on App tool bar of the Screen.
A pop screen will appear in which you specify
Short text as Distribution for MM Data.
Enter Technical Name as LGMODEL.
Select Model View and Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as LGMODEL.
Sender as LG100.
Receiver as LG200.
Again Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as LGMODEL.
Sender as LG200.
Receiver as LG100.
SAVE.
On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Logical System as LG200.
Then execute the screen.
Click back.
Again On the same screen goto Menubar and select EDIT.
Again select Model View and then select Distribute.
****LOGIN to client 200.
Execute Tr.code BD64 and again On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Model View as LGMODEL
And Specify the Logical System as LG100.
Then execute the screen.
Click back.
*******Switch back to client 100 Session.
5) Create Material using MM03 Tr.Code.
Enter the material name as LGMATERIAL
Industry sector as Mechanical Engineering
Material Type as Finished Products.
And then Click on Data Pushbutton on the App tool bar.
Select views.
In the select views box for materials check basic data 1 AND 2.
Click enter icon.
In the next screen that you get
Give the text of the material as NEW MATERIAL.
Base unit of measure as KG.
Gross Weight as 200.
Net Weight as 100.
Weight Unit as KG.
In the description area language (E) and material description.
Click Save.
Now I Created a Material in Client 100 , I want to transfer this data to Client 200.
6) Execute BD10 to transfer the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client100).
Then a Screen will be displayed in which it shows that
1 Master Idoc Generated .. Enter
1 Communication Idoc Generated..Enter.
*******LOGIN to Client 200.
7) Execute BD11 to get the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client200).
8) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
If not follow these steps.
9) Execute Tr.code WE19( for rectification of errors in client200).
Specify the Existing Idoc Number and Executes it .
A Screen is displayed in which you specify the corresponding Function Module as INPUT_IDOC_MATMAS01 and execute it.
10) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
Now the Material is correctly displayed in Client 200.
11) Monitoring of IDOCS.
Transaction Codes:
IDOC Display of Status: WE 05.
IDOC Date and Time: WE07.
Outbound:
Step 1. Application document is created when transaction is saved.
2. Message control is invoked.
3. Messages are processed by system.
4. Messages are Edited (if desired).
5. Output (ALE / EDI) is checked
6. Validate against Message control record from Partner Profile
7. Application Document is saved.
8. Entry NAST table is created for every selected output program
along with Medium & Timing.
9. Check for Process Immediately .
If (yes)
Determine Processing Program from TNAPR Table.
ELSE
Execute RSNASTED Program.
10. Read Partner Profile to determine Process Code.
11. Process Code points to the Function Module & Invoked.
12. IDoc is generated.
13. Check for ALE Request.
if (Yes)
Perform Filters, Conversions, Version Changes etc.
Else.
IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Regards

Ale config part 2...question

Hi,
While doing the ale config as per blog...
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
I managed to distribute the model view..however when i go to BD10 and select the specified material SWAR1...out of matmas...i get an error telling me that no material could be found.............How can i test that i can send an idoc to the XI system....? is there a standard material that i can send to verify this...
Venkat

There are no standard material numbers avaiable in SAP. All u need to do it to create in the TC MM01 and u can refer to the table MARA and the material number field is MATNR.
Coming WRT to the blog when u want to test it either u press F4 to get the list of material avaiable or check in MARA.

Urgent...problem in manuall ale config

hi all,
when iam doing ale config for a a simple vendor master data transfer i got error.
the first 3 steps r ok. rfc destination and test connection and remote logon is ok.
in step 4 ..i assigned a message type(cremas) to the modelview.when i expand modelview i shows sender lg sys,rec log sys and cremas,no fillers in cremas.
1)but when distribute modelview it shows no message type is assigned to modelview.
2)in partner profiles i generate ports . here also i got error. partnet profile is not generated to the xxxx log sys and cancelled in both xxxx and yyyy log sys..
reply please.
vijay

Hi,
Try creating the ports and partner profiles manually through transactions WE21 and WE20 respectively and then the distribution model (txn BD64). Now try distributing the model view and proceed with the Idoc generation.
~ Bineah.

ALE VA01 IDOCs are sent two times ?

My ALE is working well, but for eacher sales order created, Two Idocs are send (Two different idoc number but the same sales order)!
I use message controle and a partner profile Ku ans LS.
So where can I check where is this double ?
Transaction ? Tables ? Spro?
Best regards
Henri

Hi Henri,
Why do you need to have two partner profile KU and LS?
Unless you want to send to different target systems. For example, KU is for customer 'ABC' and LS for CRM system.
If you need only to send one target system then use only partner profile and delete the other one.
Please ensure the two IDoc generated are having two different recipient (KU and LS) in IDoc control.
If both IDocs have same recipient then you may need to check the ALE and IDoc configuration again.
Please check NAST table for initial investigation.
Hope this will help.
and don't forget to reward points if helpful as a way to say thanks.
Regards,
Ferry Lianto

How to start with ALE and Idocs

Hi,
I want to start with ALE/Idocs, Could you please guide me from where should I get the docs for that.
A lot of thanks in Advance

Hi Nitin ,
Pls go through the book by Arvind Nagpal , one of the best books that no one should miss.
Have a look at this site as well
http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-iii/
Check this thread, where you have step by step creation of IDOCs:
idocs
Check these links, where you get the complete information on IDOCs:
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
Regards,
Vvieks

How To Use ALE using IDOC ..

hiiiiiii Every1
I m new to this forum ans also in SAP. I m doing ALE / Idoc but not getting it. Anybody can help by explaing the steps how to perform an ALE using IDOCs.
Thanks in Advance.
Sachin Dhingra

Refer this link
http://www.sapgenie.com/ale/index.htm
http://www.sap-img.com/abap/ale-bapi.htm
http://www.thespot4sap.com/Articles/SAP_ALE_Introduction.asp
Reward points if u find it helpful.
Message was edited by: Judith Jessie Selvi

Regarding ALE n IDOC

Hi ,
I am new to the world of ALE n IDOCs can anybody describe or tell me some pdf link etc to get some knowledge about them ....
thnks

Hi Sahil,
Check these links on ALE/IDOCs for pdf
http://www.esnips.com/doc/73aa0c8b-d79b-4285-aea2-9efe9b2d7e41/idoc
http://www.esnips.com/doc/8aa545f9-31d5-4867-ae06-005b8ee54323/What-Are-IDocs
http://www.esnips.com/doc/388bfc37-91ba-4fb1-bf80-c20fa7a5e80b/Ale
http://www.esnips.com/doc/55493d2e-e4de-485a-9562-5dabe5ea7eb4/IDOC
http://www.esnips.com/doc/77126f26-98f8-42fc-8629-78aac7680fb1/ale
http://www.esnips.com/doc/9d148495-62ae-4eb7-bb3a-77c69dbfbb8a/IDOC
Check these links
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.sapgenie.com/sapedi/idoc_abap.htm
<b>Friendly Note:</b> You have many open threads and Plz close the threads if they are answered/solved and reward points to the people who are helping you by taking their time.
Thanks,
Vinay

ALE ,EDI ,IDOC?

hi SAP gurus
can u send me steps on ALE,EDI and IDOC s
[email protected]
points will be rewarded

Hi,
ALE and IDOC:
ALE stands for Application Link Enabling and is used for distribution of data. IDOC is an Intermediate Document. It carries the application data from one server to another server.It uses the RFC(Remote Function call) .
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
It is the the combination of Segements.
Segment : All the required fields will get assigned in relavant segement.Like that we will have lot of segments.We will assign all the segments to IDOC type.In the required level(Parent & child level .Like tree nodes).
Idocs Type is a Structure by lot of segments.
IDOC is generared at the time of run time .
It will have the data.
There are basically two types of IDOCs.
Basic IDOCs : Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs : Extending the functionality by adding more segments to existing Basic IDOCs.
http://www.allsaplinks.com/idoc_sample.html
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sappoint.com/abap.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseCategory/0,295197,sid63_tax296858_idx0_off50,00.html
http://sap.ittoolbox.com/documents/popular-q-and-a/extending-a-basic-idoc-type-2358
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b7eee43d711d1893e0000e8323c4f/frameset.htm
Need info on automatic determination of tax code at PO
Hope this will help.
Regards,
Naveen.

ALE,EDI,IDoc,OLE and BAPI

plsease give the detailed concept for ALE,EDI,IDoc,OLE and BAPI
awaiting reply
thanks
Moderator Message: The long waiting ended...
Edited by: kishan P on Jan 9, 2011 7:38 PM

<<non-detailed concept definitions removed by moderator>>
Edited by: kishan P on Jan 9, 2011 7:36 PM

ALE/EDI/IDOC Material

Hi Experts,
i never worked on ALE/EDI/IDOC .. Please send me the links and material about ALE/EDI/IDOC.
Thanks in Advance
Thanks,
Venkatt.

Hi
Look at this links
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
http://www.esnips.com/web/ALEIDoc
Regards
Haritha.

Ale, Edi, & Idoc Technologies by Arvind Nagpal Soft Copy

Does any one have Ale, Edi, & Idoc Technologies by Arvind Nagpal Soft Copy.
Please send an attachment to [email protected]
Or do send me the link

Hi,
Based on the business requirements, you may need to do the following actions:
1) Extending standard Idocs.
2) Complete custom idoc scenario
3) Enhancing standard Idoc population programs using exits.
4) Creating custom segments
5) Creating partner profiles
etc

Send tcode ale and idoc required

Hi ,
Plz any body can send me all tcode used in ale and idoc
Message was edited by:
anil kumar

Hi Anil,
Just give transaction BALD and you will get al lthe t-codes.
Also refer to the below link.
IDOC creation
Regards,
Atish

PPT on ALE and IDOC

Hi,
Any body can send me the ppt on ale and idoc .
great thanks in advance .
Regarding
kumar

Hi Anil,
The best way is to read the book ALE,IDOC... by Aravind nagpal,
Just read this you will get a clear idea about these.
The ppts will cover only the basic part,but i find this book as very useful when you do the coding or checking for soem settings.
Regards,
Sasi

ALE config & Idocs

Similar Messages

Maybe you are looking for