Alert Category not showing in WEB GUI

the alert was create inside the PI-PRD server, then while looking for the alert in WEB version:
see photo below,
how can i resolve this problem?
Thank you.
we're using SAP PI 7.1

Hello,
For transporting alert categories/rules u can check this
http://scn.sap.com/community/pi-and-soa-middleware/blog/2010/03/10/pixi-transporting-alerts--quick-tip
BTW, under alert config u will find a tab to update/refresh alert category which u have created on ABAP stack, so did u tried refreshing the same?
Thanks
Amit Srivastava

Similar Messages

Document Flags not showing on Web Excel

We are using BW3.5 SEM4.0.
Documents are added to cells in planning layouts.
Documents flags are showing up on web and BEx reports. They are also showing up on non-Excel web planning layouts, and Excel Gui layouts.
The flags are, however, not showing on Web Excel layouts. Althought the document could still be viewed, if you know which cell they are located in.
Is there a solution to this? Thanks for reading.
William

Hi guys,
I have a related problem: I set up BPS to handle the documents (and I already tested it, it works fine).
My 4 characteristics are WBS element, version, fisc per, and material.
Now, I am just creating a web reports that should also display these documents. What do I have to adjust in the Query designer? Do I have to restrict the report to exactly this combination to see them?
(I have tried Query properties ->Display ->Display Document links, it shows icons per column, but does not display any BPS document I created)
any help is appreciated
thanks,
martin

Colors not displaying in WEB GUI

Hi,
In WEB GUI, I am unable to see the colors in my ALV Grid when the fields are in editable mode where as in SAP GUI am able to. There is no problem when the fields are in non-editable mode.
Can you help me out to view the colors in my ALV Grid for the editable fields in WEB GUI?
Thanks,
Adithya M.

You might be out of luck, because usually there are no specific settings for the WEB GUI. And one of the problems with WEB GUI is that it doesn't support all the functionality which is offered in your standard GUI. So it is possible that this is exactly one of the scenarios WEB GUI doesn't support. That is also the reason why not all SAP transaction work in WEB GUI. We had issues with parts of TEM transactions not working via WEB GUI.
Michael

Crystal Report Viewer icons do not show in Web Application Project in VS2005 (Web Site Project OK)

Post Author: jsdude99
CA Forum: Crystal Reports
Hi,
With Visual Studio 2005, the Icons at the top of the CrystalReportViewer do not show on Web Application Project. However, If I have a web site project, they are all shown. Please note that I found number of posts that people not seeing the icons after the deployment but my case is the development environment. Once I pass the first hurdle I may face further problems like the other people, so If you happen to know answers in both situations, please share your knowlegde..
PS: I created two new types of projetcs and have just a CrystalReportViewer on the default page. Data is shown fine but the icons are missing (red X placeholders instead of icons) in Web Application Project. Very straight forward test.

We havent tried that. We changed the link in the web part to access an html page that claims that the report is loading. It states in the html that if the page doesnt load to "click here" which redirects to the crystalreportviewer. Its a temp fix for it. One thing we are looking at is the 64 bit version of the Sharepoint integration kit. That may contain a reportviewer webpart.
Thanks for the reply.
Brian

Wlst command listWebServices() does not show all web services in the domain

Hi, I am trying to use wlst command listWebServices() to display all web services of a domain. It seems that it only displays the web services of enterprice applications (ear apps), but it does not show the web services of web applications (war apps). If I pass ear appliication name and one of its web module to listWebServices, it will show the web services that belong to the web module of this application. However if I pass war application name and its web module name to listWebServices, it will return "Unable to find the SOA Composite or Service. Oracle UCM Native Web Services", although I can see from wls admin console or em that this web application does have a couple of web services.
I also tried to call listWebServicePolicies, again it returned "Unable to find any Web Services with the specified Application".
My purpose of doing above is to use wlst to detach/attach web service policies for some web services. Since I cannot find the web services, I off course cannot detach/attach policies.
Does anyone have any clue how to find web services using wlst command that belong to a war application, and then detach/attach policies ? Any help will be greatly appreciated.
Thanks,
Jian Huang
From Oracle fusion HCM

As of UCM version 11.1.1.6, Oracle UCM Web Services are managed from Enterprise Manager in Fusion Middleware Control, not Weblogic Admin Console!
A document at Oracle support explains this in more detail: https://support.oracle.com/epmos/faces/ui/km/DocumentDisplay.jspx?id=1456506.1 :
Setting up GenericSoapService in WLS to use WS-Security:
Go to FMW Enterprise Manager. http://wlshost:7001/em
In the tree, navigate to Weblogic Domain -> <Domain Name> -> and click on UCM_server1. (If the managed server for WCC is named something other than UCM_server1, click on that name.)
From the UCM_server1 drop down menu, select "Web Services".
On the "Oracle Infrastructure Web Services" tab, click the GenericSoapPort link.
Once there you can set the policies you want and restart the server!
Regards,
Göran
Edited by: Göran Paues on 2012-aug-20 10:02

TH_DELETE_MODE not working in Web GUI after EHP7 upgrade

Hi
After upgrading to EHP7 the function module TH_DELETE_MODE is not working in the Web GUI. If I start the TH_DELETE_MODE in SE37 with the default paramter "1-" I'll get the HTTP error code 500. We use the function module for our webdynpro to logout but it is not working anymore.
Any idea or recommendation?
Thank you and best regards, Ronny

Your server-side include has all of the HTML on it for a full
page.
Strip everything from it except the stuff you want to
include.
http://www.fordwebs.com/mx-asp/ssi-index.asp
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com
"ValsGalore" <[email protected]> wrote in
message news:f019c0$in1$[email protected]..
>I just recently began work on an existing Web site, which
includes the file
> nav.asp on every page. After I made some changes to one
of the pages (it's
> temporarily located at
http://www.enviroglasproducts.com/reps5.asp),
I found
> that when I closed it and reopened it in Dreamweaver, I
could no longer see the
> page in preview mode.
>
> It shows my </head> tag highlighted in yellow, but
won't let me click on it.
> In code view, the <table> tag, which is the first
tag after <body>, is "marked
> as invalid because it's an overlapping or unclosed tag."
I've been over this
> document several times, but I cannot find any errors in
the construction of the
> table.
>
> If I copy all the content into an identical page, it
will look fine in
> Dreamweaver until I close it and reopen it, and then I
will have the same
> problem.
>
> Oddly, when I remove the  from the second cell
> of the main table, then everything looks fine.
>
> Other points worth mentioning are that (until I delete
it), nav.asp shows up
> in its proper location in reps5.asp, but nothing else
does except for the image
> that appears right above it.
>
> In other pages on the site, the included nav.asp does
not show up in
> Dreamweaver at all.
>
> Can anyone think of why this is happening?
>
> Thanks!
>

Alert Configuration not showing up: Error 404

Hi, we engaged this issue some days now and we already checked some entries in this forum but altering doesn't show up in RWB!
So we already did:
1. Activated all services concerning Alerts (SICF)
2. added all user rules to the users in charge
3. checked notes 913858, 750287 etc.
we found sth. what we don't know if its right. When looking in exchange profile we edited the parameter com.sap.aii.rwb.server.centralmonitoring.r3.ashost in the fully qualified hostname. But when checking entries like com.sap.aii.ib.server.connect.webas.r3.ashost we only see the hostname - not fully qualified. so paremeters look like this:
com.sap.aii.rwb.server.centralmonitoring.r3.ashost = server02.domain.local
com.sap.aii.ib.server.connect.webas.r3.ashost = server02
Doesn't these parameters have to be in same structure?! So when we changed com.sap.aii.rwb.server.centralmonitoring.r3.ashost in server02 we could not sign on to RWB service with any user.
Can somebody help us on this issue?! We have to activate altering but its is not showing up in RWB at all!
br

hI,
Error: 404 Not Found
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
u2022 404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
u2022 Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
u2022 If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
u2022 If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
Regards

Chart is not showing in Web Query

Hi,
I tried to display the query in web. The table was showing fine with all the information.
However, when I clicked the graph tab for showing the information in chart, the chart is not showing and I got an error message saying 'Chart "GR2Chart": Data Provider does not contain any data'
Do you think I need to create the chart first using Web Application Designer?
Thanks a lot for your help.

Hi all,
Thanks a lot for the answers. Unfortunately, the problem can't be solved yet.
I have asked the BASIS to check IGS Service, and it has been installed and has been restarted too but it didn't help.
Regarding the web application designer, we don't need to create the web layout on web application designer right? You can publish the query automatically from web publish button on query designer. Only workbooks that we need to create the web layout on web application designer.
It's just wierd that the table is showing the data but on the chart, it's saying there is no data.
Thanks for your help by the way.

2602e Reset to Defaults Except IP not Work over Web GUI

Hello,
1. Set a Static IP
2. Apply & Save Configuration
3. After Reboot the IP is correct.
Then do Reset to Defaults Except IP in the WEB Gui.
After Reboot the AP loos the static IP and get a DHCP Address.
Reset to Defaults Except IP = Reset to Defaults !
Whats Wrong ?

OK, here is:
Writing out the event log to flash:/event.log ...
*Jan 22 17:44:56.675: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram
*Jan 22 17:44:57.547: %SYS-5-RELOAD: Reload requested by on console. Reload Reason: Reload Command.
Write of event.log done
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP: Numonyx Mirrorbit (0089)
Xmodem file system is available.
flashfs[0]: 212 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 15058432
flashfs[0]: Bytes available: 16939520
flashfs[0]: flashfs fsck took 23 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: 10:f3:11:c2:2e:3a
Ethernet speed is 1000 Mb - FULL Duplex
Loading "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a"...##########################
File "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Tide MB - 32MB of flash
Xmodem file system is available.
flashfs[0]: 212 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 15058432
flashfs[0]: Bytes available: 16939520
flashfs[0]: flashfs fsck took 14 seconds.
Base Ethernet MAC address: 10:f3:11:c2:2e:3a
Boot CMD: 'boot flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a;flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a'
Loading "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a"...#######################################
File "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a" uncompressed and installed, entry point: 0x1003000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C3600 Software (AP3G2-K9W7-M), Version 15.2(4)JB3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 23-Dec-13 08:11 by prod_rel_team
Tide MB - 32MB of flash
Initializing flashfs...
flashfs[3]: 212 files, 7 directories
flashfs[3]: 0 orphaned files, 0 orphaned directories
flashfs[3]: Total bytes: 31739904
flashfs[3]: Bytes used: 15058432
flashfs[3]: Bytes available: 16681472
flashfs[3]: flashfs fsck took 12 seconds.
flashfs[3]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 0 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
Copy in progress...CCCCC
Copy in progress...CCC
Copy in progress...CCCC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CCC
Copy in progress...CC
Copy in progress...CCCCC
Uncompressing radio files...
...done Initializing flashfs.
Radio0 present 8764 8000 0 A8000000 A8010000 0
Rate table has 650 entries (20 legacy/224 11n/406 11ac)
POWER TABLE FILENAME = ram:/B2.bin
Radio1 present 8764 8000 0 88000000 88010000 4
POWER TABLE FILENAME = ram:/B5.bin
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-SAP2602E-E-K9 (PowerPC) processor (revision A0) with 204790K/57344K bytes of memory.
Processor board ID FGL1711Z6K6
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 10:F3:11:C2:2E:3A
Part Number                          : 73-14511-02
PCA Assembly Number                  : 800-37898-01
PCA Revision Number                  : A0
PCB Serial Number                    : FOC17093TXF
Top Assembly Part Number             : 800-38357-01
Top Assembly Serial Number           : FGL1711Z6K6
Top Revision Number                  : A0
Product/Model Number                 : AIR-SAP2602E-E-K9
Press RETURN to get started!
*Mar 1 00:00:16.035: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
*Mar 1 00:00:16.151: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (11)APAVC: WlanPAKs 18174 RadioPaks 17566
*Mar 1 00:00:23.131: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:29.443: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:29.503: initializing dot11 onplus
*Mar 1 00:00:29.667: not a autoconfig enabled device!!!
*Mar 1 00:00:31.671: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:32.671: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 00:01:18.015: Starting Ethernet promiscuous mode
*Jan 22 17:44:57.000: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jan 22 17:44:57.000: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Jan 22 17:44:57.007: %CDP_PD-4-POWER_OK: Full power - HIGH_POWER inline power source
*Jan 22 17:44:57.015: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3600 Software (AP3G2-K9W7-M), Version 15.2(4)JB3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 23-Dec-13 08:11 by prod_rel_team
*Jan 22 17:44:57.015: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to downERROR: Failed to configure ethernet promiscuous mode. Interface Descriptor mismatch
*Jan 22 17:45:01.667: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (0-0)
*Jan 22 17:45:01.667: DPAA Initialization Complete
*Jan 22 17:45:01.667: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Jan 22 17:45:02.667: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Jan 22 17:45:06.863: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.16.33.216, mask 255.255.254.0, hostname ap

Flash Controls Not Showing On Web Page

Hi-
Been beating my head lately using Flash Pro 8 and DW 8.02.
Here is the latest difficulty:
Created a Flash video file in Premiere Elements 4
Imported the .flv Flash video file into Flash 8 using import
video
Added an external skin to the video
Saved Flash .fla file
Exported movie in .swf format
I can open the .swf file in Flash Player 8 and it works fine.
I can also use the Publish setting in Flash to export the necessary
files as well as the HTML file. When viewed in either Firefox or IE
it plays correctly and the player controls are present. However, if
I create a new page in DW8 and then Insert > Media > Flash,
point it to the .swf file and then view it in Firefox or IE I can
only see the .flv Flash video file and none of the controls/skin
that should be there. I know the controls/skin are actually present
because I can browse directly to the .swf file and it displays
works properly. I can also use the publish settings from Flash to
create the HTML page and it works correctly as well. It is only
when the page is generated by DW8 that I get this problem. I have
looked at the code created by DW8 and cannot find any reference to
the .swf file for the movie controls/skin. Any idea why DW8 would
only be placing the Flash video .flv file on the page and not
writing the code to place the entire Flash movie .swf on the page?
I have tried restarting/rebooting, created a new "clean" test page
with only the Flash movie on it and it is always the same. The
other thing that is weird is I did not select Autoplay or Loop in
the DW8 settings nor in Flash 8, yet when I preview the page
created by DW8 in a browser, piece of the Flash movie I can see
(the Flash video part) autoplays and loops!
Again, any help is appreciated.
-=SB

Update- This is what I have discovered while playing around
with the page and Flash file:
If I create the .swf files for the movie and skin and then
save them to the same directory as the .Flash video file and then
view the .swf file everything works fine.
If I then create a web page using DW8 and insert the Flash
into the page and save the web page to the exact same directory as
all the other files and then view the web page in a browser, it
works fine. However, if I create a new web page in DW8, save it to
any other directory other than the one where the .swf and .flv
files are located and then view the page in a browser only the .flv
Flash video portion of the movie will display in the browser--the
controls are missing. However, if I browse directly to the .swf
file and avoid going through the DW8 generated web page the Flash
movie displays properly with the controls in the correct location.
My question then is why will DW8 not show the Flash movie with
controls if the page is located in higher level directory than the
.swf and .flv files and yet browsing directly to the .swf file with
my browser works just fine? I have checked the path to the .swf
file in the DW8 source code and it is pointing to the correct
directory location. This is so strange--why will it display one way
and not the other? Any ideas?

Cummulated kpi which is created in BEX dssigner is not showing in WEBI Side

I am facing below issue
i have create one kpi working capital commutative in Bex designer which is cumulation .its working fine
means result is coming cummulated in bi side. but in WEBI side above kpi is NOT Showing . Already I Have allow external access to this query
Please advise me the above issue
Thanks
Nishant

Hi suman,
PFA attached screen shot and detail about above problem
In BEX designer side we create two KPI one is not cumulated and other one is Cumulated .but on WEBI side ONLY ONE KPI Which is non cumulated in nature is showing and other one which is cumulated nature is not showing
For Ref purpose i have attached screen shoot
1) First pic show KPI Is cumulated in nature
2) Second Pic KPI Is Non cumulated in nature
3) third pic show on Webi side on that side only comulative KPI is shown

Last Data Update Info field not showing in Web Template

Last Data Update Info field does not show up in the Web Template. This Web Template is for a MultiProvider on top a single cube.
Greatly appreciate if anyone has any insight into this issue.

Hi Suma,
if other queries work fine using exactly the same (customized) template the problem is most likely not the template. Does the appropriate query does display figures? Is your data binding done correctly within the template?
What happens if you execute the customized template which does not display Last Data Update Info field with another (i.e. a different) query? Does it display the Last Data field? What happens the other way round: you execute a different template with the appropriate query (which does not display Last Data Update). Does it show the Last Data Update?
Just give it a try, this sometimes help
Brgds,
Marcel

Flex Alert box not showing text after single inverted comma

Hi friends,
I am launching a flex app (swf) from a JSP page. i am sending a value using flashvars like below.
flashvars.message = '<c:out value="${requestScope.message}"/>';
This message consists a single inverted comma in between...ex:- L'impression des pages
But when i want to show this message using alert box in flex like Alert.show(message);, it just shows
'L'. i mean it is not showing complete message. the text after inverted comma is missing....
it will be great if anyone can help me here...
Thanks,
Krish

Hi friends,
I am launching a flex app (swf) from a JSP page. i am sending a value using flashvars like below.
flashvars.message = '<c:out value="${requestScope.message}"/>';
This message consists a single inverted comma in between...ex:- L'impression des pages
But when i want to show this message using alert box in flex like Alert.show(message);, it just shows
'L'. i mean it is not showing complete message. the text after inverted comma is missing....
it will be great if anyone can help me here...
Thanks,
Krish

Alert box not showing up

Hello,
I am having this strange problem with Alert dialog boxes. My application has some Alert dialog boxes and when I click a button to show the Alert, sometimes, I get a grayed out screen but no alert box. Other times it works properly. I tried PopUpManager.bringToFront() and setting the parentApplication as the Sprite but i cannot get this to work consistently.
I know it has something to do with initialization of the main Application but I don't know where to look. Another clue i found is that sometimes, one of application asset (icon image) also does not show up.
[Embed(source="assets/images/myproj/delete_on.png")]
private const removeEntryIcon:Class;
Most of the time it does show up. So I know there is nothing wrong with this code or the location of the asset. Can anyone give me some insight into what is happening here.

I think you were on the right track, it did have something to do with the parent fla file. Once I complied it's parent file (and imported the window and alert classes into the parent), my message appeared in the alert box.
It doesn't make any sense, because the component is not in the parent file, it's in the sub-parent fla file, but I guess you just have to compile all the files in the hierarchy for it to work... It also doesn't make sense why everything else worked before (the title, the yes and no buttons) except for the message.
Thanks for the suggestion (to look at the depths, etc), however, I'm still unable to understand why the alert is not modal as it should be. If anyone has any suggestions on how to fix the buttons to make them modal, please let me know. Thanks.

XML child 'Title' does not show on web page

I have imported an XML file and when I launch the page the
title does not show.
The following is on my page but does not display "
<td><?xml version="1.0" encoding="UTF-8"?>
<Title>Miss Congeniality 2: Armed and
Fabulous</Title>xx </td>
The rest of the field do display and I can not understand why
'Title' Does not display.
Thanks for any help
David Merchant
The following is the code to display the data:
<cfloop index="MyCounter" from="1" to="#Counter#">
<tr>
<td>#mydoc.Collection.DVD[MyCounter].ID#</td>
<td>#mydoc.Collection.DVD[MyCounter].UPC#</td>
<td>#mydoc.Collection.DVD[MyCounter].ProfileTimestamp#</td>
<td>#toString(mydoc.Collection.DVD[MyCounter]["Title"])#xx </td>
<td>#mydoc.Collection.DVD[MyCounter]["SortTitle"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["Rating"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["ProductionYear"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["RunningTime"]#</td>
<td>#mydoc.Collection.DVD[MyCounter]["Audio"]#</td>
</cfloop>
This is the XML file I am reading
<?xml version="1.0" encoding="us-ascii"?>


<Collection>
<DVD>
<ID>012569557123.21</ID>
<UPC>012569-557123</UPC>
<ProfileTimestamp>2004-03-17
23:58:12</ProfileTimestamp>
<Title>Doctor Zhivago</Title>
<SortTitle>Doctor Zhivago</SortTitle>
<Regions>
<Region>3</Region>
</Regions>
<Discs>
</Discs>
</DVD>
</Collection>

I believe you want to print the XML node's text to a HTML
table cell. To do so you would change:
<td>#mydoc.Collection.DVD[MyCounter].ID#</td>
to
<td>#mydoc.Collection.DVD[MyCounter].ID.XMLText#</td>
Try appending ".XMLText" to your variables.
I would also consider droping the ToString method with:
<td>#toString(mydoc.Collection.DVD[MyCounter]["Title"])#xx </td>
to
<td>#mydoc.Collection.DVD[MyCounter]["Title"].XMLText#</td>
I don't know why you are invoking the toString() function
here and not on the other nodes. It only confuses me, and likely
you when you have to return to this code later, unless you are
trying to do something special with this node, like set your HTML
<title> tag.
If you are trying to set your document's <title> tag
then it should belong between the <head> tag of your document
and not inside your table, as a matter of semantics.

Alert Category not showing in WEB GUI

Similar Messages

Maybe you are looking for