Alerts - All Metrics Errors - Health Check - Collection Failure

I have database instances with Health Check - Collection Failures.
These errors are almost 30 days old. I originally received the Health Check errors because the credentials were not set properly. I then set them but the errors have not aged out.
Does anyone know how can I clear out the Health Check errors?
When I look at All Metrics, Health Check for one of these databases, the Last Upload date is very old.
Maybe I can I force a re-collection?

Hi ,
I had the same problem and posted the same ...question...
So , the link will help you to solve the problem
Clear the Alert list
unless somebody else has another idea...!!!!!!!!!!!
Regards and hope this will help,
Simon

Similar Messages

  • Instance health check failing with errors

    Hi
    One of the instance showing " Agent connection is Instance is unavailable". How ever it is collecting and showing instance performance when I go to Performance pane.
    When I check in emagent.trc file it is saying either agent/instance are running with different user than ORACLE or group not DBA.
    Actually, in my case both are same.. l mean Oracle:dba.
    I have bounce many times agent but no luck.
    Your valuble comments helps greatly.
    Here is error message
    Target TARGET_NAME_INST1
    Type Database Instance
    Metric Health Check
    Collection Timestamp Jul 16, 2007 10:45:28 AM
    Error Type Collection Failure
    Message Instance Health Check initialization failed due to one of the following causes: the owner of the EM agent process is not same as the owner of the Oracle instance processes; the owner of the EM agent process is not part of the dba group; or the database version is not 10g (10.1.0.2) and above.
    ________________________________________________________________

    Use metalink - its your friend...
    Symptoms
    Caution:
    The scope of this note is limited to Agents 10.2.x monitoring Oracle Databases running on HP-UX.
    By default, the Agent 10.2.x is collecting the Healthcheck metric every 15 seconds. This metric basically gives an indication whether the monitored database is up and running.
    On some circumstances, the Healthcheck metric cannot be collected. This results in such entries being added every 15 seconds to the $AGENT_HOME/sysman/log/emagent.trc log file:
    2007-05-09 09:21:36 Thread-81 ERROR fetchlets.healthCheck: Error: process context is not initialized
    2007-05-09 09:21:36 Thread-81 ERROR engine: [oracle_database,EMI10104_rmtdchp4,health_check] : nmeegd_GetMetricData failed : Instance Health Check initialization failed due to one of the following causes: the owner of the EM agent process is not same as the owner of the Oracle instance processes; the owner of the EM agent process is not part of the dba group; or the database version is not 10g (10.1.0.2) and above.
    2007-05-09 09:21:36 Thread-81 WARN collector: <nmecmc.c> Error exit. Error message: Instance Health Check initialization failed due to one of the following causes: the owner of the EM agent process is not same as the owner of the Oracle instance processes; the owner of the EM agent process is not part of the dba group; or the database version is not 10g (10.1.0.2) and above.
    or
    Solution
    There are several steps to solve this problem:
    1. If the Agent Release is 10.2.0.1 or 10.2.0.2, upgrade the Agent to 10.2.0.3 and follow the steps below.
    2. For HP-UX 10.2.0.3 Agent, here are the instructions to fix the problem while keeping the Healthcheck metric enabled. This section takes place in the Agent Oracle Home.
    2.1. Download Patch 5854190 from Metalink.
    2.2. Setup the Agent environment and shutdown the Agent by doing:

  • Health Service Heartbeat Failure Alert for Generated when one Management Server Down,

    Hi,
    I have Two Management Server, every one manage about 100 server, when one Management Server goes down unexpected, I receive 100 Alert for 100 Server Health Service Heartbeat Failure.
    My Question, why when the Management Server down, it send that all Managed agent Health Service Heartbeat Failure?
    Is there a way to change this?

    SCOM 2012 agent will autofailover when primary server is down. You can check the failover management server by using the following powershell cmdlet:
    #Verify Failover for Agents reporting to MS1
    $Agents = Get-SCOMAgent | where {$_.PrimaryManagementServerName -eq 'MS1.DOMAIN.COM'}
    $Agents | sort | foreach {
    Write-Host "";
    "Agent :: " + $_.Name;
    "--Primary MS :: " + ($_.GetPrimaryManagementServer()).ComputerName;
    $failoverServers = $_.getFailoverManagementServers();
    foreach ($managementServer in $failoverServers) {
    "--Failover MS :: " + ($managementServer.ComputerName);
    Write-Host "";
    http://www.systemcentercentral.com/how-does-the-failover-process-work-in-opsmgr-2012-scom-sysctr/

  • SCOM health Check report

    please suggest me how to generate SCOM health check report and automation for the same. I am using scom 2007 R2.
    And need all windows servers health check report from scom as well...?

    Hi
    As a good starting point you could use these reports
    http://www.systemcentercentral.com/scc-health-check-reports-management-pack-v2/ and some Details here
    https://blogs.technet.com/b/kevinholman/archive/2010/07/21/system-center-central-some-really-cool-opsmgr-health-reports-available.aspx. Which give you a pretty good picture of your environment.
    For a MG check up on the SQL side see here
    http://blogs.technet.com/b/kevinholman/archive/2010/06/16/management-group-checkup-a-database-perspective.aspx
    Cheers,
    Stefan
    Blog: http://blog.scomfaq.ch

  • Comm. error while checking accnt assignment for invoice 8000338378 in syste

    Hi all,
    Comm. error while checking accnt assignment for invoice (8000338378) in system   .
    But every thing is good.but we are geting error list above error
    Reagrds,
    Srikanth

    Hi Praveen and all,
    Thanks for your replies.
    I tried doing setting with VKOA and checked with
    VF02, Environment-Account determination analysis.
    --> it says account determination is found.
    Then i clicked the Flag button(Release to accounting) in VF02.
    It gives below error in status bar
    <b>"only output tax is allowed for account 175000 JTC1, E0 is not allowed"</b>
    How to go ahead or solve this error.
    suggest me please.
    regards
    Ambichan

  • Upgrade - Health Check Error

    Hi All, I am upgrading the site collection which has NO workflow implemented in 2010. When I am doing health check before the upgrade I am getting this
    •<websiteUrl>/_catalogs/wfpub/Approval - SharePoint 2010/ReviewApproval_1033.vdw - Reset page to default
    •<websiteUrl>/entsearch/Pages/peopleresults.aspx - Reset page to default
    •<websiteUrl>/_catalogs/wfpub/Collect Feedback - SharePoint 2010/ReviewFeedback_1033.xoml.wfconfig.xml - Reset page to default
    •<websiteUrl>/_catalogs/wfpub/Approval - SharePoint 2010/ReviewApproval_1033.xoml.wfconfig.xml - Reset page to default
    •<websiteUrl>/_catalogs/wfpub/Collect Feedback - SharePoint 2010/ReviewFeedback_1033.vdw - Reset page to default
    •<websiteUrl>/_catalogs/wfpub/Collect Signatures - SharePoint 2010/Signatures_1033.vdw - Reset page to default
    •<websiteUrl>/entsearch/Pages/results.aspx - Reset page to default
    •<websiteUrl>/_catalogs/wfpub/Collect Signatures - SharePoint 2010/Signatures_1033.xoml.wfconfig.xml - Reset page to default
    •<websiteUrl>/Education Documents/Forms/template.dotx - Reset page to default
    •<websiteUrl>/_catalogs/masterpage/VariationRootPageLayout.aspx - Reset page to default
    What is this error about? Should I proceed the upgrade with this error or resolve? 
    Please advice.
    Regards,
    Khushi
    Khushi

    Hi,
    According to your post, my understanding is that you got “Reset page to default” error in Health Check.
    If you haven't customize any workflow or anything, you can just reset them to the default, it’s OK.
    Because in the database the sourse pages were completely uncustomized, out of the box.
    So, you can reset them to the default, then check with Health Check, it would no error again.
    http://www.chrismcnulty.net/blog/Lists/Posts/Post.aspx?ID=113
    Thanks & Regards,
    Jason 
    Jason Guo
    TechNet Community Support

  • PI2.1: collection failure with all 2950

    Hello
    I have all Switches 2950  with The collection status  "collection failure".
    PI version  is 2.1
    OID of 2950 is : 1.3.6.1.4.1.9.1.324  : Catalyst295024
    Software version is : flash:/c2950-i6q4l2-mz.121-20.EA1a.bin
    --> Should be supported by PI2.1
    If I hit the detail of the "collection status detail" , I have this error message:
    "An unexpected error occured"
    # Check the device is in supported device list in deployment guide    --> Yes !
    # Check the device credentials provided are valid    --> Yes !
    # Finally if the problem still persists then contact Cisco System's technical assistance center 
    I tried to change the snmp timeout, and also to use snmpv1.
    In the inventory.log, I have this first ERROR message:
    [2014-05-14 15:26:42,420] [ICE Service[ 1]Thread: 8] [ice] [ERROR] - java.lang.IllegalStateException: Business key attribute: name on entity com.cisco.xmp.model.managed.vendorSpecificTechnologies.cisco.accessControlList.IpAce is null.
    java.lang.IllegalStateException: Business key attribute: name on entity com.cisco.xmp.model.managed.vendorSpecificTechnologies.cisco.accessControlList.IpAce is null.
    And finaly:
    [2014-05-14 15:26:42,826] [ICE Service[ 1]Thread: 8] [inventory] [INFO ] - Complete inventory for deviceid 2300304 ...
    Could you please help me.
    Michel Misonne

    Leo,
    I think you are not correct ...
    ( to be truth - I hope it ;- )  )
    in PI 2.2 the Cat 3550 is listed under the supported devices whereas the Cat 2950, 2955 are not:
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/release/notes/cpi_rn.html#pgfId-43885
    But the latter are listed as being supported in PI 2.1 (while the Cat 3550 is not...)
    http://www.cisco.com/c/dam/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/supported/devices/pi21-supported-devices-list.xlsx?mdfid=284540974
    So hopefully it is just a matter of time to get them ALL on the list of supported devices for the current version of PI 2.2 ...
    I just saw that for Prime Network (Management SW for Service Providers) they even have Cat 3500XL on the list of supported devices... (but I do not know for which type of management they do support these devives, e.g. config, alarming,etc) 
    http://www.cisco.com/c/dam/en/us/td/docs/net_mgmt/prime/network/4-2/supported/vnes/CiscoPrimeNetwork-4-2-SupportedCiscoVNEs.pdf 

  • How to be notified for all ORA- Errors recorded in the alert.log file

    based on Note:405396.1, I Changed the Matches Warning from the default value ORA-0*(600?|7445|4[0-9][0-9][0-9])[^0-9] to ORA-* in order to receive an warning alert for all ORA- errors.
    but I just recieved the alert like the following:
    Metric=Generic Alert Log Error
    Time/Line Number=Mon Feb 25 23:52:21 2008/21234
    Timestamp=Feb 26, 2008 12:06:03 AM EST
    Severity=Warning
    Message=ORA-error stack (1654, 1654, 1654) logged in /opt/oracle/admin/PRD/bdump/alert_PRD.log.
    Notification Rule Name=Alert Log Error
    Notification Rule Owner=SYSMAN
    as you can see, the message only indicate the ORA-1654, nothing else.
    How to set in 10g grid control to get the details alert that in the alert log like:
    "ORA-1654: unable to extend index ADM.RC_BP_STATUS by 1024 in tablespace PSINDEX"
    I can't believe Oracle 10g Grid control only provide the ORA- number without details

    Go to your database target.
    On the home tab, on the left hand side under Diagnostic Summary, you'll see a clickable date link next to where it says 'Alert Log'. Click on that.
    next click on Generic Alert Log Error Monitoring Configuration (its at the bottom)
    In the alert thresholds put:
    ORA-0*(600?|7445|4[0-9][0-9][0-9])[^0-9]
    I believe that will pick anything up but experiment, its only perl.
    If you want to test this use the DBMS_System.ksdwrt package but I would advise you only do so on a test database. If you've never heard of it, google it. Its a way of writing to your alert log.
    Make sure you have your emails sent to long format as well.

  • Check Event Alert failed with error - No errors in the log file.

    Hi All,
    I am developing a simple event based alert on PO_HEADERS table. I want to send alerts when a PO is created.
    I did all the steps according to the metalink note How To Send An Email In A Simple Periodic Or Event Alert? [ID 1162153.1]
    When i create the PO, the alert is triggering, and Check Event Alert concurrent program is running. But the program completes with error.
    Checking the output file (empty) log file (no errors)
    What can i do here to find out what is the problem? There is nothing in the Alert Manager - History form also. I have kept 7 days as days to keep.
    Thanks!
    M

    Can you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
    I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
    Thanks,
    Hussein

  • Turning Off The Alert - Notebook PC Battery Replacement Program Alert in Health Check.

    I want to turn off the Notebook PC Battery Replacement Program Alert in Health Check. It continues to alert me for months now. This is driving me batty since I have checked it 3 times and it is not included in the recall! I have a HP Pavillion dv6000 running Windows Vista Home Premium Edition. Any help to turn this darn alert off permanently would be very helpful. Thanks.

    Thank you to all who have read this post so far.  Please continue to contact HP directly using the above information.
    Matthew|Community Advocate | Best Buy® Corporate
    Visit our Channel on
     Private Message

  • Collection-Status in All Metrics

    Hallo,
    on my "All Metrics" Page for the OID LDAP Server i have very old "last collected" Dates.
    (some months ago)
    Where can i refresh the collected values and edit the refresh interval ?
    Thanks,
    Jochen

    You can't change the collection interval in 10gR1. You have 2 possible ways to correct it that I know of. One, stop and start the oem agent, "emctl stop agent". Or two, is to reconfigure the Metric "Monitoring Configuration". EIther of these should force a re-eval of the metrics. Check your logs for any failed collection messages.

  • EM12c: Collection interval and all metrics data caching

    Hi,
    I am trying to have a plugin collecting some small set of data at 1 - 5 minute intervals and also be able to view this data using all metrics views at the same intervals. The data view does not seem to update at the interval the agent is collecting the data from the source. The data view updates the last collection timestamp at 15+ minute interval and not the interval I specify in the collection item.
    Is there some configuration I am missing to make the view update at around the same frequency as the collection is executed? I am not looking for instant update but at least within a minute after the collection has done its job.
    I have following collection configurations in a plugin:
         <CollectionItem NAME="CPU" UPLOAD="1" UPLOAD_ON_FETCH="TRUE">
              <Schedule>
                   <IntervalSchedule INTERVAL="5" TIME_UNIT="Min"/>
              </Schedule>
              <MetricColl NAME="CPU">
    And
         <CollectionItem NAME="Memory" UPLOAD="1" UPLOAD_ON_FETCH="TRUE">
              <Schedule>
                   <IntervalSchedule INTERVAL="1" TIME_UNIT="Min"/>
              </Schedule>
    Thanks, Ari
    Edited by: Ari on May 11, 2012 12:49 PM

    You can't change the collection interval in 10gR1. You have 2 possible ways to correct it that I know of. One, stop and start the oem agent, "emctl stop agent". Or two, is to reconfigure the Metric "Monitoring Configuration". EIther of these should force a re-eval of the metrics. Check your logs for any failed collection messages.

  • How to remove ALL metric and policy alerts in EM Grid Control

    Hi,
    does anyone know how to clear all metric AND policy alerts in EM GC?

    See this thread..
    Clear the Alert list

  • RSMO: Health Check Error ORA-16820

    Hello Everyone,
    I'm trying to troubleshoot this weird error in our DG setup. I have FSFO enabled and observer running. However, when i check the status of standby database with show database 'stdby', i get ORA-16820, however, i do the same for primary database, status is success.
    Already looked at DG logs, but not much help other than health check error with ORA 16820 FSFO observer is no longer observing this database.
    Any pointers to troubleshoot is appreciated.
    Thanks.
    PS. 10.2.0.5/Linux 5.x
    Edited by: user11241492 on May 11, 2011 5:24 PM

    What does SHOW CONFIGURATION VERBOSE; return?
    Larry

  • Health Check Error: Dependency$ p_timestamp mismatch for VALID objects

    Just before the upgrade when we ran the health check we got the following 8 errors and want to fix them.
    Dependency$ p_timestamp mismatch for VALID objects
    [E] - P_OBJ#=5015556 D_OBJ#=5015647
    [E] - P_OBJ#=5015556 D_OBJ#=8432965
    [E] - P_OBJ#=5015576 D_OBJ#=5015647
    [E] - P_OBJ#=5015576 D_OBJ#=8432965
    [E] - P_OBJ#=5015588 D_OBJ#=5015647
    [E] - P_OBJ#=5015588 D_OBJ#=8432965
    [E] - P_OBJ#=5015589 D_OBJ#=5015647
    [E] - P_OBJ#=5015589 D_OBJ#=8432965
    SELECT o.obj# d_obj, do.name d_name, do.type# d_type, po.obj# p_obj, po.name p_name, to_char(p_timestamp,'DD-MON-YYYY HH24:MI:SS') "P_Timestamp",
    to_char(po.stime ,'DD-MON-YYYY HH24:MI:SS') "STIME", decode(sign(po.stime-p_timestamp),0,'SAME','*DIFFER*') X FROM sys.obj$ do, sys.dependency$ d, sys.obj$ po WHERE
    P_OBJ#=po.obj#(+) AND D_OBJ#=do.obj# AND do.status=1 /*dependent is valid*/ AND po.status=1 /*parent is valid*/ AND po.stime!=p_timestamp /*parent timestamp not match*/ ORDER BY 2,1;
    8432965 AQ$_KUPC$DATAPUMP_QUETAB_P 2 5015576KUPC$_API_ACK09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
    8432965 AQ$_KUPC$DATAPUMP_QUETAB_P 2 5015589KUPC$_MASTERJOBINFO 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
    8432965 AQ$_KUPC$DATAPUMP_QUETAB_P 2 5015556KUPC$_LOGENTRIES 09-DEC-2009 14:01:27 29-NOV-2010 12:04:13*DIFFER*
    8432965 AQ$_KUPC$DATAPUMP_QUETAB_P 2 5015588KUPC$_MASTERERROR 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
    5015647 KUPC$DATAPUMP_QUETAB 2 5015576KUPC$_API_ACK 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
    5015647 KUPC$DATAPUMP_QUETAB 2 5015589KUPC$_MASTERJOBINFO 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
    5015647 KUPC$DATAPUMP_QUETAB 2 5015556KUPC$_LOGENTRIES 09-DEC-2009 14:01:27 29-NOV-2010 12:04:13*DIFFER*
    5015647 KUPC$DATAPUMP_QUETAB 2 5015588KUPC$_MASTERERROR 09-DEC-2009 14:01:28 29-NOV-2010 12:04:14*DIFFER*
    Solution as per the 579256.1's is
    The returning objects will have to be recompiled or recreated to clear the problem.
    Please see Note 781959.1 to recompile them. This can cause problems during upgrade and PLSQL validation.
    But in my case above objects are not synonyms and are of type=2.
    So, not sure how to fix them. pl. let us know how we can fix these errors.

    Well, I can tell you that this kind of error is not OS related, but rather a HW thing.  It happens where there is a general detection of something going wrong.  Sometimes it can happen randomly and might not be an indication of a problem.  But sometimes it can be caused by things that are improperly functioning within the system like bad capacitors. 
    Unfortunately I don't really know what to do about such things except give you machine a proper inspection.  But if things are working fine, and continue to do so, I wouldn't worry about it.  If it becomes a regular occurance, then I'd worry.

Maybe you are looking for

  • Delivery Notes Generation Via Pick List

    Am trying to generate delivery notes off pick tickets and i can't find any code example. I now came up with the following code but am having issues when items are in multiple Bin Locations. Public Sub Sales2Delivery() '(ByVal OrderID As String)      

  • How to move an iTunes library

    I'm retiring and moving everything from my iMac to a MacBook Pro. Is there specific procedure anywhere for moving my iTunes library (lots of purchased movies and music plus my own stuff) from the iMac to the MBP? Thanks. LarryMcJ

  • Client Auth  and SSL with Seeburger AS2 adapter

    Hello All, We are using the Seeburger AS2 adapter in our landscape and I am in the process of setting the same up and have made quite some progress in all my issues. and I  hope that you will be able to help me out. 1. Server SSL on Receiver AS2 adap

  • Patch for upgrading OBIEE 11.1.1.5.0 to 11.1.1.6 for OBIA 7.6.9.4

    Hi, We have installed OBIEE 11.1.1.5 and installed OBIA 7.6.9.4. But when we try to open RPD file it gives error of compatibility. Can anyone tell me what is the Patch number which can upgrade OBIEE to 11.1.1.6 Thanks In Advacne, Ankit

  • How do you unlock an ipod5 when u have forgoten ur lock code

    I have forgoten my lock code for my apple ipod5 and cant get in it.