Alerts and Most Common Alerts Report information Displays Blank

Hello Sir,
Could some one help me on my Issue in SCOM 2012 R2.
Previously we use to generate all reports with out any issues, But very recently we had an issue while generating reports for "Alerts" and "Most common Alerts" Reports (from Microsoft Generic Library) its giving a blank with out any data.
Where in CPU, Memory, Disk Utilization are coming fine as expected. Only issue with "Alerts Reports"  and "Most Common Alerts Report".
Not sure how to proceed further to trouble shoot this issue.
Regards,
SA

Thank you Sir,
Previously all reports works fine, but recently we had issue only for "Alerts" and "Most Common Alerts" reports which is giving the blank DATA. Please find the below screen shot of the report.
<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f"></v:shapetype>
<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">Could
you please assist me how to fix this issue.</v:shapetype>
Regards,
Sanjeev Kumar N
<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
 <v:stroke joinstyle="miter">
<v:formulas>  <v:f eqn="if lineDrawn pixelLineWidth 0">
  <v:f eqn="sum @0 1 0">
  <v:f eqn="sum 0 0 @1">
  <v:f eqn="prod @2 1 2">
  <v:f eqn="prod @3 21600 pixelWidth">
  <v:f eqn="prod @3 21600 pixelHeight">
  <v:f eqn="sum @0 0 1">
  <v:f eqn="prod @6 1 2">
  <v:f eqn="prod @7 21600 pixelWidth">
  <v:f eqn="sum @8 21600 0">
  <v:f eqn="prod @7 21600 pixelHeight">
  <v:f eqn="sum @10 21600 0">
 </v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
 <v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
 <o:lock aspectratio="t" v:ext="edit">
</o:lock></v:path></v:stroke></v:shapetype><v:shape alt="" id="Picture_x0020_1" o:spid="_x0000_i1025" style="width:431.25pt;height:277.5pt;" type="#_x0000_t75">
<v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\15147\AppData\Local\Temp\msohtmlclip1\01\clip_image001.jpg">
</v:imagedata></v:shape>

Similar Messages

  • I am unable to aceess torrentz website.its coming that your IP address is abusing this server and most common reason is broken RSS reader

    i am unable to aceess torrentz website.its coming that your IP address is abusing this server and most common reason is broken RSS reader

    I have discovered it is most likely because you have Ad-Blocking software.
    If your posting on a Mozilla site, then you probably (like me) use FireFox and probably also have the addon: AdBlock Plus, like I also do. I simply disabled on Torrentz.eu (also Torrentz.me would cause this problem) & when I refreshed it allowed me again.

  • Business Importance of CCMS alerts and Early Watch Alerts configuration

    Hi All,
    I have to present to the management how will configuring CCMS alerts and EWA alerts impact the business and how will it help in maintaining our business and existing scenario through the same. Could some body provide me with the PPT presentations/links/ slides which would help me.
    Points guarnateed for good help . Thanks ins advance.
    Regards,
    Somya Maheshwari

    Hi Somya,
    Actually if you are looking for business point of view you need to go for BPM which is more important from business perspective
    and further now we have BPO dashboards too.
    so customer will be more happy if you can configure bpm because then you can get the reports etc in workcenter and they can view the same in workcenter rather than just technical alerts in CCMS.
    Because based upon my exp they want to go for proactive monitoring not just technical monitoring and later we come to know what happened without knowing the business impact actually.
    Moreover in solman 7.1 its a wizard based approach to configure entire technical monitoring just go thru it.
    this note might help you otherwise.
    SAP note 897226 ('Monitoring TREX with CCMS")
    and below links with ccms config
    Monitoring your SAP NetWeaver Components
    setup ccms
    Setting Up your Central Monitoring
    hope it helps further
    regards
    prakhar
    Edited by: Prakhar Saxena on Feb 7, 2012 1:51 PM

  • When I tap a photo in my iPhone photo gallery, the photo appears but there is always a "this movie format not supported" alert and then the alert goes away and the photo appears. These are photos I've taken with the iPhone and aren't even movies.

    It's very odd. I take photos with my iPhone and then later go to view the photos in the Photo Gallery on my iPhone. The photos to appear, but I keep getting "this movie format not supported" alerts, even though I am looking at photos taken by my iPhone. The alert appears briefly just after the photo appears and then the alert goes away and I can see the photo. They are just still photos and not movies. Why wouldn't the iPhone recognize the format of photos it is taking?

    That thread helped for a time.  But now it seems as though my computer is back to slow again.  But, some of the jargon is over my head as well.  Not sure I knew quoite everything they were talking about.  But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again.  Thanks so much.

  • Report is displaying blank?

    hi all
    my report with less parameters is working fine but when i increased parameters its showing me report can anyone guide me plz.its displaying blank page
    here is my codes:
    DECLARE
    repid REPORT_OBJECT;
    v_rep VARCHAR2(100);
    rep_status VARCHAR2(20);
    plid ParamList;
    vParamValue number;
    BEGIN
    plid := Get_parameter_List('tmp');
    IF NOT Id_Null(plid) THEN
    Destroy_parameter_List( plid );
    END IF;
    plid := Create_parameter_List('tmp');
    add_parameter(plid,'P_num',text_parameter,to_char(:pays.num));
    add_parameter(plid,'p_code',text_parameter,to_char(:pays.code));
    add_parameter(plid,'p_basic',text_parameter,to_char(:pays.basic));
    add_parameter(plid,'p_housing',text_parameter,to_char(:pays.housing));
    add_parameter(plid,'p_water',text_parameter,to_char(:pays.ele_water));
    add_parameter(plid,'p_transport',text_parameter,to_char(:pays.transport));
    add_parameter(plid,'p_desc',text_parameter,to_char(:pays.description));
    add_parameter(plid,'p_amount',text_parameter,to_char(:pays.amount));
    add_parameter(plid,'p_deduct',text_parameter,to_char(:pays.deduction));
    add_parameter(plid,'p_net',text_parameter,to_char(:pays.net_amount));
    add_parameter(plid,'p_total',text_parameter,to_char(:pays.total));
    add_parameter(plid,'p_other',text_parameter,to_char(:pays.other));
    add_parameter(plid,'p_money',text_parameter,to_char(:pays.money_in_words));
    add_parameter(plid,'p_num2',text_parameter,to_char(:payslip.num));
    add_parameter(plid,'p_name',text_parameter,to_char(:payslip.employee_name));
    add_parameter(plid,'p_gender',text_parameter,to_char(:payslip.gender));
    add_parameter(plid,'p_nat',text_parameter,to_char(:payslip.nationality));
    add_parameter(plid,'p_martial',text_parameter,to_char(:payslip.martial_status));
    add_parameter(plid,'p_date',text_parameter,to_char(:payslip.join_date));
    add_parameter(plid,'p_job',text_parameter,to_char(:payslip.job_title));
    add_parameter(plid,'p_bank',text_parameter,to_char(:payslip.bank));
    add_parameter(plid,'p_account',text_parameter,to_char(:payslip.account_no));
    add_parameter(plid,'p_year',text_parameter,to_char(:payslip.year));
    Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
    repid := FIND_REPORT_OBJECT('REPORT6');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
    v_rep := RUN_REPORT_OBJECT(repid,plid);
    rep_status := REPORT_OBJECT_STATUS(v_rep);
    WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
    LOOP
    rep_status := report_object_status(v_rep);
    END LOOP;
    /*Display report in the browser*/
    WEB.SHOW_DOCUMENT('http://sara:8889/reports/rwservlet/getjobid'
    ||substr(v_rep,instr(v_rep,'_',-1)+1)
    ||'?'
    ||'server=repserver&P_num='||:pays.num
    ||'&p_code'||:pays.code
    ||'&p_basic'
    ||:pays.basic||'&p_housing'
    ||:pays.housing||'&p_transport'||:pays.transport
    ||'&p_water'||:pays.ele_water||'&p_amount'
    ||:pays.amount||'&p_deduction'||:pays.deduction
    ||'&p_netamount'||:pays.net_amount
    ||'&p_total'||:pays.total||'&p_other'
    ||:pays.other||'&p_word'||:pays.money_in_words
    ||'&p_num2'||:payslip.num
    ||'&p_name'||:payslip.employee_name
    ||'&p_gender'||:payslip.gender||'&p_nat'
    ||:payslip.nationality||'&p_martial'
    ||:payslip.martial_status||'&p_date'
    ||:payslip.join_date||'&p_job'
    ||:payslip.job_title||'&p_bank'
    ||:payslip.bank||'&p_account'
    ||:payslip.account_no||'&p_year'
    ||:payslip.year||'&paramform=no','_blank');
    END;
    Edited by: SarahSarahSarah on Aug 16, 2009 4:20 AM
    Edited by: SarahSarahSarah on Aug 16, 2009 4:23 AM

    sarah,
    Check the query in the report. The reason for blank report will be the query returning blank. So check the report's query in SQL *PLUS or other softwares like TOAD, SQL Developer etc.
    Regards,
    Manu.

  • Disable calendar alerts and it keeps alerting

    Settings--->Sounds--->Calendar Alerts - set to OFF
    It just keeps right on alerting.
    This is a new problem. It's never happened before today that I can remember. Most of the time the phone is in another room but today, I'm traveling and it's by the nightstand as my alarm clock.

    When in doubt, try the age-old-proven remedy of resetting the iPhone. Press and hold both the sleep button on the top and the home button. Usually a reset will rectify most situations.

  • QM Desktop - Report tab displays blank page

    Hi all,
    I'm currently running UCCX7.0(1) with QM2.7(3) and i'm facing the following issue.
    Thru QM Desktop - Report tab, an IE page will be displayed to show the available reports that we wish to run. It's trying to launch the following link https://<ip.address>:8448/QMR/Login?signature=49B7E14D173A2...E10D664 However a blank page is being displayed.
    I remember seeing this a while back where it's something to do with the report templates, files, etc missing / not installed correctly.
    a) which folder is storing the report files?
    b) is there a way to load the missing files without reinstallation?
    c) any other reason why this is happening?
    Thanks!
    -JT-

    Quick update
    I manually change the url from :8448/QMR/xxx">https://:8448/QMR/xxx to :8088/QMR/xxxx">http://:8088/QMR/xxxx and this time the QM Reporting System page is displaying according.
    I don't believe there was any option during install/postinstall that enable us to specify if we want to use SSL or not. Any ideas?
    Thanks!
    -JT-

  • Alerts and Reporting

    I am using ALSB 2.6
    Question 1.
    There is an option in the Alert Destination to send the message to?Reporting? (a selection of yes or no)
    This is documented to be: ?Reporting: If you specify Reporting, alerts are sent to the ALSB Reporting module and can be captured using a custom Reporting Provider that can developed using the Reporting APIs provider by AquaLogic Service Bus. This allows third-parties to receive and process alerts in custom Java code.?
    I have set-up the reporting module to use oracle. I created two tables:
    SQL> select * from tab
    2 /
    TNAME TABTYPE CLUSTERID
    WLI_QS_REPORT_ATTRIBUTE TABLE
    WLI_QS_REPORT_DATA TABLE
    When I create alerts to a destination with the ?reporting? option enabled, I do not see any data in the oracle tables. Regular ?report? actions do end up in these tables.
    Question 2: Where are alerts stored? I'm just curious on this one.
    Question 3: In a error handle at the route stage level, I placed an alert and a report action. I tried it twice with report first, then alert, and the reverse, alert than report. The alert comes out in the console, but the report action doesn't in either case.
    Can anyone shed some light on this? I'm just diving into ALSB and trying various things.
    TIA
    Steve

    Thanks for your reply!
    1) Looks like the new Reporting Services does not run as a Windows Service so it's not listed in the "Configure Service Accounts" pulldown.  As a result, I don't see how to set the service account.  It's only assigned to an application pool. 
    I installed it into an existing application pool and that application pool "is" in the list and has a domain service account already assigned.
    2) Which users need to be in here in order to configure the "Provision Subscriptions and Alerts" screen?  I already have the farm admin account which is the account I use when running Central Admin.
    3) As mentioned in #1, I've installed Reporting Services into an existing application pool with other service apps.
    4) This link is for Reporting Services 2008 R2 which is very different install process.  But I did follow the SQL Server Reporting Services 2012 RC0 installation instructions and the Reporting Services is functioning correctly with no errors. 
    I'm just not able to configure the sceduling the alerting with interfaces with the SQL Server Agent.
    Thanks!

  • Google cal and iCal, weird alert settings!?

    Hi,
    I'm using a Google calendar in/through iCal (on Mac OSX Lion - the problem existed under Snow Leopard as well though) and everything works fine except that the Google calendar seems to automatically create two weird and quite annoying alerts for the events as well!? I always have to manually set these alerts to 'none' in order to get rid of them.
    This does not happen with normal iCal calendars nor with Exchange calendars.
    Any help would be greatly appreciated!! Thank you very much,
    Jerome

    THANK YOU  THANK YOU  THANK YOU!!!
    Didn't realize "default" alerts on the Google Calendar side would transfer to iCal as multiple alerts AND an email alert.
    Is there a way (maybe from the terminal) to go through one's iCal and programmatically remove all Email alerts from existing events/appointments?  I know I might be pushing my luck here...

  • Most Popular Items Report: items listed in report are not the document names or titles

    I have a document library that's loaded with typical corporate ppt, word, and pdf files.  When I run a Most Popular Items report on the library, the list of items displayed in the report are not the document file names or document titles. 
    Instead, the report is showing information that seems to pulled from within the content itself.
    For example, there's a new corporate ppt template in the document library and the Most Popular Items report shows the sharepoint url for the ppt file as being one of the most popular items.  Let's say that the file is named Standard_ppt_template.ppt. 
    The url for one of the most popular items reflects that in the URL.  However, the item is listed in the Most Popular Item as "Company Confidential".  The report seems to be pulling the words "Company Confidential" listed in the
    footer of the ppt template and showing that as the most popular content item. 
    Is there a reason or setting why the Most Popular Items report is not returning a list of items based on either the file name or the document title?
    Thanks in advance for any advice.

    Hi,
    According to your post, my understanding is that the PPT files items in the “Most Popular Items” report display these items’ names seem to be pulled from the PPT files’ content.
    Per my test, the Word, Excel, PDF, .txt, .png files items in the “Most Popular Items” report will display these items’ names based on the corresponding items’ title value if they have, or the corresponding file name if these items don’t have the title value.
    However, it’s by design that the PPT files items in the “Most Popular Items” report will display these items’ names only based on the beginning of these PPT files’ content rather than these files’ names and the corresponding items’ title value.
    Best Regards,
    Yumi Fu

  • Problem with CCMS PI7.1 alert configuration for RWB Alert count

    Hi,
    We have configured CCMS alert for PI7.1 RWB failure count. Alert is getting triggered only one time and after that no alerts. I can see the change in data but alert is not getting triggered. If I complete the alert then immediately in next run a new alert is generated with last reported data and then again there will be no alert going forward. Data is collected but no alert is triggered. Does anyone know the reason for this and how to fix it? Please help.
    Thanks,
    Kavitha Rajan.

    Hi Jayan,
    Our PI alert configuration is fine. And also we did not choose multiple suppress method. Problem is with Solution Manager CCMS PI alert configuration for failed RWB count. After initil alert and then nomore alerts are triggered. If I complete the alert then again only first alert is triggered and again no alerts going forward. Please advice.
    Thanks,
    Kavitha Rajan.

  • NAS / Cloud solution that allows offline support for most commonly used files.

    Hi All,
    I bought a Macbook Air because I love to travel light.  Sadly because of the lack of disk space I struggle to store everything. I live by the 80/20 rule and recognise that I use 20% of the files 80% of the time. 
    I would like to store all my files (music, photos, etc.) in the cloud or on NAS. I would then like Air to automatically store a subset of files stored locally based on  limits I set (favourites, certain photos albums, playlists, and most commonly used files) aka the 20% of files I use 80% of the time.  I would then like it so that if I was connected to the internet, I could access any file (without having to use some alternative application / website to access them). 
    Does anyone know of a way to do this?

    Hi All,
    I bought a Macbook Air because I love to travel light.  Sadly because of the lack of disk space I struggle to store everything. I live by the 80/20 rule and recognise that I use 20% of the files 80% of the time. 
    I would like to store all my files (music, photos, etc.) in the cloud or on NAS. I would then like Air to automatically store a subset of files stored locally based on  limits I set (favourites, certain photos albums, playlists, and most commonly used files) aka the 20% of files I use 80% of the time.  I would then like it so that if I was connected to the internet, I could access any file (without having to use some alternative application / website to access them). 
    Does anyone know of a way to do this?

  • DtReport structure and Alerts Settings from sender AS2 Reports adapter

    Hi,
    I have imported DtReport for MDN's from SeeBurger AS2 adapter documentation as external definition into PI. However, in the mapping, when I select DtReport as source, I could see only the following structure:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:DtReport xmlns:ns0="http://uri.seeburger.com/dt/master/schema">
       <ns0:clientId/>
       <ns0:correlationId/>
       <ns0:category/>
       <ns0:state/>
       <ns0:finalReport/>
       <ns0:freeText/>
       <ns0:specificData/>
       <ns0:reportAttachment/>
       <ns0:archiving/>
    </ns0:DtReport>
    But when I import the test MDN message that we received it has key and value elements underneath the tag 'specificData'. How do I get these two elements from external definitation?? Anything that I should in External References??
    How does the following 'Alerts Settings' work from sender AS2 Reports adapter:
    Enable alerts
    Negative transmission report alert
    Negative delivery repot alert
    Negative receipt report alert
    Thanks,
    Riya

    Here is the XSD:
    ?xml version="1.0" encoding="ISO-8859-1"?
    xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:att="http://uri.seeburger.com/bisas/message/schema" xmlns:tns="http://uri.seeburger.com/dt/master/schema" xmlns="http://uri.seeburger.com/dt/master/schema" targetNamespace="http://uri.seeburger.com/dt/master/schema" elementFormDefault="qualified" attributeFormDefault="unqualified"
         xsd:import namespace="http://uri.seeburger.com/bisas/message/schema" schemaLocation="attachments.xsd" /
         xsd:include schemaLocation="dtglobaltypes.xsd" /
         xsd:include schemaLocation="dtarchiving.xsd" /
         xsd:element name="DtReport" type="tns:DtReportType" /
         xsd:complexType name="DtReportType"
              xsd:sequence
                   xsd:element name="clientId" default="000" type="tns:stringLength3Type"
                        xsd:annotation
                             xsd:documentation
                             Logical System ID
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:element
                   xsd:element name="correlationId" type="tns:uuidType" /
                   xsd:element name="category" type="tns:reportCategoryType" /
                   xsd:element name="state" type="tns:reportStateType" /
                   xsd:element name="finalReport" type="xsd:boolean"
                        xsd:annotation
                             xsd:documentation
                             True if this report is the last one for the given correlationId
                        E.g. if this report is a deliveryReport but there is also a remaining ReadReceipt, then finalReport would have the value &apos;false&apos;
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:element
                   xsd:element name="freeText" type="xsd:string" minOccurs="0" /
                   xsd:element name="specificData" type="tns:keyValueType" minOccurs="0" maxOccurs="unbounded"
                        xsd:annotation
                             xsd:documentation
                             Optional report data specific to the components and protocols
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:element
                   xsd:element name="reportAttachment" type="att:AttachmentRefType" minOccurs="0"
                        xsd:annotation
                             xsd:documentation
                             Optionally holds the report as attachment in its raw format.
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:element
                   xsd:element name="archiving" type="tns:archivingType" minOccurs="0" maxOccurs="unbounded" /
              /xsd:sequence
         /xsd:complexType
         xsd:complexType name="responseReportHandlingType"
              xsd:annotation
                   xsd:documentation
                   Information in a DtResponse about the report handling of the sent payload.
                   /xsd:documentation
              /xsd:annotation
              xsd:sequence
                   xsd:element name="reportsExpected" type="xsd:boolean"
                        xsd:annotation
                             xsd:documentation
                             True if at least one report is pending (false if the one and only report is contained in response).
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:element
                   xsd:element name="expectedReports" type="tns:expectedReportsType" minOccurs="0" maxOccurs="unbounded"
                        xsd:annotation
                             xsd:documentation
                             List of expected reports - also including the one optionally included in the response.
                            If reportsExpected is true then this list must contain at least one entry, else it must be empty.
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:element
                   xsd:element name="dtReport" type="tns:DtReportType" minOccurs="0"
                        xsd:annotation
                             xsd:documentation
                             Optional report if it was synchronously received.
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:element
              /xsd:sequence
         /xsd:complexType
         xsd:complexType name="initiationReportHandlingType"
              xsd:annotation
                   xsd:documentation
                   Information in a DtRequestInitiation about the report handling of the received payload.
                   /xsd:documentation
              /xsd:annotation
              xsd:sequence
                   xsd:element name="reportsExpected" type="xsd:boolean"
                        xsd:annotation
                             xsd:documentation
                             True if at least one report was requested.
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:element
                   xsd:element name="preparedReports" type="tns:preparedReportsType" minOccurs="0" maxOccurs="unbounded" /
              /xsd:sequence
         /xsd:complexType
         xsd:complexType name="expectedReportsType"
              xsd:sequence
                   xsd:element name="category" type="tns:reportCategoryType" /
                   xsd:element name="timeoutDate" type="xsd:dateTime" /
                   xsd:element name="deliveryState" type="tns:deliveryStateType" /
              /xsd:sequence
         /xsd:complexType
         xsd:complexType name="preparedReportsType"
              xsd:sequence
                   xsd:element name="category" type="tns:reportCategoryType" /
                   xsd:element name="timeoutDate" type="xsd:dateTime" minOccurs="0" /
                   xsd:element name="reportMessage" type="att:AttachmentRefType" /
              /xsd:sequence
         /xsd:complexType
         xsd:simpleType name="reportCategoryType"
              xsd:restriction base="xsd:NCName"
                   xsd:enumeration value="DeliveryReport"
                        xsd:annotation
                             xsd:documentation
                             Report informing about the state of the delivery on a physical base
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:enumeration
                   xsd:enumeration value="ReceiptReport"
                        xsd:annotation
                             xsd:documentation
                             Report informing about the state of the receipt on a semantic base
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:enumeration
                   xsd:enumeration value="TransmissionReport"
                        xsd:annotation
                             xsd:documentation
                             Report informing about the state of the transmission on a physical base
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:enumeration
              /xsd:restriction
         /xsd:simpleType
         xsd:simpleType name="deliveryStateType"
              xsd:restriction base="xsd:NCName"
                   xsd:enumeration value="DELIVERED"
                        xsd:annotation
                             xsd:documentation
                             Delivery proceeded
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:enumeration
                   xsd:enumeration value="PENDING"
                        xsd:annotation
                             xsd:documentation
                             Delivery pending
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:enumeration
              /xsd:restriction
         /xsd:simpleType
         xsd:simpleType name="reportStateType"
              xsd:restriction base="xsd:NCName"
                   xsd:enumeration value="SUCCESS"
                        xsd:annotation
                             xsd:documentation
                             Positive report
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:enumeration
                   xsd:enumeration value="FAILURE"
                        xsd:annotation
                             xsd:documentation
                             Negative report
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:enumeration
                   xsd:enumeration value="EXPIRED"
                        xsd:annotation
                             xsd:documentation
                             No report received in time
                             /xsd:documentation
                        /xsd:annotation
                   /xsd:enumeration
              /xsd:restriction
         /xsd:simpleType
    /xsd:schema
    Edited by: Riya Patil @SAP on Feb 4, 2010 9:05 PM
    Edited by: Riya Patil @SAP on Feb 4, 2010 9:05 PM

  • Click on a textbox, display alert and link to other page.

    hi, here i wanna do is when i click on a textbox, onFocus on it, then call a function to perform checking, and then if the textbox data have breakdown record then display an alert to the user and link to breakdown page.
    [Display out in a table]
    <%for(int c=0; c<progPect.size(); c++){%>
    <td id=progPect><input type="text" size=5 id="progPect" value='<%=progPect.elementAt(c)%>' onFocus="chkBreakdown(pass in 3 parameter);"></td>
    <td id=progQty><input type="text" size=5 id="progQty" value='<%=progQty.elementAt(c)%>' onFocus="chkBreakdown(pass in 3 parameter);></td>
    <td id=progLump><input type="text" size=5 id="progLump" value='<%=progLump.elementAt(c)%>' onFocus="chkBreakdown(pass in 3 parameter);></td>
    after calling the chkBreakdown function and found out that it has record, then pop up an alert that tell the user this record have breakdown, and then link to the other page with the same window.
    so the problem is how to identify user click on which row in the table.

    Vuze installs ask.com's tool bar also. Check for a Vuze plug in. Thanks for the fix.

  • IPhone 6 recently stopped ringing and making text alert sounds since most recent upgrade to ios 8.1.1, has anyone experienced this, and if so, how did you correct?

    AFter recent upgrade to ios 8.1.1, my iphone 6 no longer makes text alert sounds and ring does not sound for incoming calls (except on car bluetooth).  has anyone experienced this, and if so, how did you correct?

    I had the same problem until tonight. Played with ring tones, do not disturb, volume, and everything else posted. What I found is that when you go to sounds/text tone, there are two types of tones in the scrolling menu. The top set of tones are for alert tones and the bottom set are ringtones. They are separated by a gray bar that states their purpose. Many of the tones are the same name. You need to set your text alert in the Ringtones and reminders, alarms, and such in alerts. The weird thing about this menu is when you go to sounds/ringtone the menu is reversed. Mine works in locked mode or unlocked now. I have an Iphone 6 8.1.2. My problem started after my latest OS upgrade. Hope this helps.

Maybe you are looking for

  • How to set dbms_stats parameters for a single table

    Hi, I see that dbms_stats has the following procedure: PROCEDURE SET_PARAM Argument Name Type In/Out Default? PNAME VARCHAR2 IN PVAL VARCHAR2 IN Is there a way to change the parameters only for a single table? I need to set METHOD_OPT=>'FOR ALL COLUM

  • Can 5 axis image stabilization be engaged with non system lenses for A7II and A7rII?

    Many people use/will use their excellent non system manual focus non system macro lenses on the A7II and undoubtedly on the soon to be released A7RII. Stabilization in the X/Y planes is very very important for macro. Sony on the A7II only stablizes t

  • Errors occurs when localizing an Struts webapps in Tomcat5.0 under Linux.

    I have an Struts webapps,which was deployed correctly and ran well in my Tomat5.0 under win2K. Then i copied the webapps to the Tomcat5.0_HOME/webapps/ under Linux. Then i copied all the struts *.jar files to the Tomcat5.0_HOME/common/lib. With the w

  • IMPORT PORTAL 10G R2

    Hi I want to export my portal (generate with Oracle Portal 10g R2) to another Server, i create it from properties of the Page Gruop, but i don't know where is it? (physically) and how to import it to a new middle tier. Can anybody help me? Thanx. Ale

  • Peer to Peer AV issue through Edge

    We have a standard edition 2013 FE with a 2010 Edge server, When users do AV conferencing internally with each other it works fine, If user A outside the firewall starts an AV conference with user B inside the firewall through the edge server it says