All 3rd party plugins gone after update !!! HELP APPLE !!!!!!

All my 3rd party plugins are gone after the new update from apple !! I am running lep and logic studio G5 dual 2.5 ppc 8 gigs of ram !!!! What happen ???? Can not get the AU manger to launch !!!!! Help dead in the water !!!!!!!

Relax guy!
Try trashing to audiounits cache, and the Logic caches:
user/library/caches/com.apple.audiounits.cache
and
user*/library/caches/Logic/
Reboot, and try again...

Similar Messages

HT5706 photos on screen saver gone after update of apple tv

photos on screen saver gone after update of apple tv

Welcome to the  Discussion Forums
Why are you looking in a shared library, is itunes set up as a secondary library.
See This
If you are set up as a primary library you need to look in my tv shows.
When you say you have reinstalled everything, does that include itunes (if so how did you do that), does it include rebuilding your itunes library.

All 3rd Party PlugIn Pref's get reset after InDesignCrash

AdobeInDesignCS 6
Steps to reproduce
1. Install third party plugins
2. Create Preference Settings
3. save and quit out of InDesign
4. launch InDesign, Verify pref settings.
5. Force Quit InDesign
6. Launch InDesign/Verfiy pref settings and they will not be there.

Well, now it's official, thanks to 3rd party apps and/or faulty system software my iPod is Dead.
When I created this thread I was having all 3rd party apps crash constantly, and instantly upon launch. The myriad of methods used to recover it to working order failed. I decided to do a Restore and use the last successful backup. It got to about the 95% mark on the restore and hung for 2 hours. The exact same place for 2 hours.
Not having the ability or patience to wait for my iPod to get done tying up my computer, I reset it. Now, all I've got is a $299.99 Paperweight that constantly displays a nice and shiny apple logo on it's screen.
An attempt to restore it to factory settings only gave me an error dialogue box:
The iPod "Kuhnaydeein's iPod" could not be restored.
An unknown error occurred (0xE8000035).
Now what am I supposed to do? I don't live near an Apple Store, the only place that sells apple merch is the store where I work, in the department I work. I know our policy on taking back/exchanging iPods.
What I've failed to mention is how I'm EVER going to sell one of these to someone if there's a chance they'll just be getting the same FAULTY Hardware/Software I'm now stuck with? Is Apple going to come to the rescue, read this post and replace my iPod? I sincerely hope they read this, because they don't give the slightest hint at any Direct Email addresses on the Apple.com website. (What's with that anyway?)
So what do I do now? RESTORING IS NOT AN OPTION.

3rd Party Plugins in Future Update?

So now that Speedgrade uses the Mercury engine for rendering, is it possible that we'll see the ability to use 3rd-party plugins in a future update?

3rd party plugins coming through PR should be supported already. Are you having any issues ?

Disabling all 3rd party plugins on an OSX user?

Hey there,
Long time no see. I'm rolling out a college motion graphics program and have hit a snag on our computer configuration. We have individual OSX user logins for each class and are using the CS5.5 Production bundle. We have a few 3rd party plugin packages installed (such as Trapcode Suite, Keying Suite, Magic Bullet Suite, etc.) and I would LOVE to disable/hide those on the account for the intro class.
Are there any straight-forward options that I'm not thinking of? I've done lots of searching but am not coming up with much.
Thanks!!!
-steven

Just for fun I moved my Trapcode plug-ins from the Library/Application Support/Adobe/Common/Plug-ins/MediaCore directory to a new folder under my Rick User account I called AdobePlugins.
I changed the premissions of this folder so that other users would not be able to see the folder by setting no access for everyone. I then created an alias for the Trapcode plug-ins and moved the alias back to the original location. I then switched users and it worked. No access to the trapcode plug-ins from the other user.
This was on a Mac OSX Lion 10.7. It's kind of a hack, and the uninstallers and installers won't like it much, but so far it seems to be working. I don't know if something like this would work for Windows, but I do know that Aliases work there too. Give it a shot at your own risk.

All my music is gone after updating my iPhone 4. And if i try to download it again in iTunes music store i have to pay for it again?

Hey.
After updating my iphone 4, all my music disapered, and when i tryed to download it again on itunes music store, it said that i have to buy it again. Is there a way I can get it back whitout buying it again.?

On the home page in iTunes on the right, is a purchased link. Click that to download past music purchases for free,

All pictures and videos gone after update to 1.1 o...

I just updated to 1.1
When I open gallery there is no images or videos at all?
How can I get it back?

update OTA
anyhow after one more restart I can see pictures and videos in galery, but tags and albums are still gone....
I have nearly 2000 pictures.... I hope I do not have to sort and tag pictures again.....

*Folders on Desktop Gone After Update *HELP*

I just did the Updates the Software Updater Recommended and after they were finished downloading I restarted my computer.
When my computer started back up all the folders and such that were on my desktop were no longer there. I can still find them through the Finder, so they are still on my Hard Drive. I just enjoyed having them on my desktop, and want to get them back their, and let other mac useres aware of the problem.
I am going to try to find a history of my updates to diagnose the problem, let me know how I can do that if its possible.
If anyone else has had this problem let me know what I can do.
Message was edited by: wesb

Okay here is what I just installed:
iLife Support 8.2
Keynote Update 4.0.2
Pages Update 3.0.2
Numbers Update 1.0.2
Safari 3.1.1
Security Update 2008-003 (Intel) 1.0
Also I took a screen shot of the updates I've done to look at while I typed this up, and usually these go straight to the desktop when you make them, but his one didn't, however it could still could found through the finder.
ALSO, I tried dragging folders out of my finder window onto the desktop and nothing happened.
Why won't anything go on my desktop???
Help Mac!

10.8.1 - Major Issue - All Mail in "Trash" Gone after Update

ML 10.8 started off for me (and many others) with a few bugs and a major battery issue and now with the 10.8.1 update comes the biggest nail in the coffin with all of my email in the "Trash" folder completely gone.
I need some help from some experts here.
99% of the mail in my "Trash" is gone. I only have email dating back to August 22, 2012 (which is the day I upgraded from 10.8 -> 10.8.1)
I'm using 3 POP accounts and 1 IMAP account.
All accounts and their appropriate "Trash" folders had hundreds of deleted items and the IMAP account had thousands.
I noticed this today while doing a search for somthing in the "Trash"
I'm not sure what to do here, cannot contact AppleCare at the moment as they are closed.
Help...

I get an error "No valid mbox files were found" on both
Jesus
Re-adding won't help me for this account - my IMAP server doesn't have any items in the Deleted Messages folder on the server-side.
Here's where I'm confused - if I receive email in my Inbox, I delete certain items, they end up in my Trash (have been there prior to 10.8.1) and now they're just gone. I've made sure to specify that Mail doesn't permanently delete items on the Server, leaves them there, etc. And since I can remember all items I manually Delete, just go into the "Trash"
Thoughts?

All My Contacts have gone after updating iphone4 to ios5

So i decided to move with the times and finally update my iphone as some apps would no longer work without updating to ios5.
Everything is in my phone apps, music, calenders, notes emails but the contacts have all gone. I have tried to restore my iphone through itunes but this hasnt worked i only had one restore option available which was a sync that was completed after my contacts were gone from the update.
I now realise how stupid this was to never have uploaded my contacts to so sort of app but to be honest i never gave it a second thought. Is there anywhere i can get my contacts from or are ther lost forever????
please have some magic fix for me
Pete

I've lost mine, too. However, I've found that they're all there if I go in via the phone. The contacts app just shows "no contacts". When searching from other apps (such as Reminders), it doesn't find anything, but spotlight finds them.

I want to cancel my icloud? and all my ringtones are gone after update

I want to cancel my icloud how do i do that?

You don't cancel icloud. It is a service available to you if you choose to use it. You may simply choose not to use it.

Leopard logic pro 8 3rd party plugins

Hey all,
are all 3rd Party Plugins working in Leopard??

All the ones I use are. Hope this helps!

3rd Party Plugins Have Disappeared After OS X Mavericks Update

Hi. I'm have a bit of a panic here.
I'm a sound engineer and I use Mainstage 2 frequently to run all FX live for a variety of artists.
After reading forums with regards to the Mavericks update, I found no evidence of it causing issues with Mainstage of Logic.
HOWEVER, I upgraded from Snow Leopard to Mavericks yesterday and Mainstage has decided to throw a massive wobbly. When I load up my show, it says "The plug-in named 'XXXXX' is not available on your sysem." It's done this for every single 3rd-party plugin on my machine so I basically have nothing! Good one Apple!
I restored my machine to a backup I took just before the OS upgrade. Guess what.......it's even doing it there now! It's back on Snow Leopard. I've been into the folders and all the plugins are there. For some reason, Mainstage isn't finding them. I'm at a total loss and about to throw this thing out the window.
Can anybody save me???
Thanks.
Jonny

Verified and repaired disk permissions but still no luck.
I thought Time Machine was meant to put the computer back to its exact state at the time of back-up?!
Anybody know if there's a UK phone number for an expert on Logic/Mainstage?!
Thanks.

3rd party plugins not working after archive and install

hi,
i have a few 3rd party plugins in my logic pro, such as all the native instruments, waves diamond, ik multimedia plugins, atmosphere and a few more,
i was getting an error on my g5 when i tried to run diskwarrior from the disk. it was the kernal panic message, it said i had to restart my mac, therefore i couldnt run diskwarrior from disk.
i did a bit of research and a few people suggested doing a archive install, so i did.
well what do you know, i had to re-install logic 8 again. other programmes such as transcribe, itunes idvd imovie etc were ok.
but logic didnt load up, o i had to re-install logic again,
also before i did that i checked to see if my 3rd party plugin were working in standalone, so i check all the native instruments and they seemed to work ok, T-racks deluxe works fine, so i thought they should all load up in logic.
once logic was installed again and had to get all the updates all my 3rd party plugins did not show up on my AU validation.
is there a way to get logic to see my 3rd party plugins or do i have to re-install all of them again.
cheers for the help
lib

Then check if the NI AU components are actually where they should be:
HD/Library/Audio/Plug-Ins/Components
If not copy them over from your "previous systems" folder which was created on your HD during the archive and install process.

3rd party plugins crash Premiere after restart.

Yesterday, everything worked fine. I have a Sequence with clips and have been happily rendering from it for a week.
It has a mixture of Magic Bullet Looks, Film Convert and native effects across a range of clips.
Today, on opening Premiere I find that if any of the 3rd party plugins are enabled I can't render - worse, they crash Premiere.
I have not installed anything or changed anything since I was last using Premiere. I installed an update to the Creative Cloud desktop app this morning, but that was after I started having these issues.
I have tried restarting Premiere numerous times.
Rendering is fine with native Premiere plugins.
System:
Win 7 Pro
Core i7 950
12gb RAM
Quadro FX3800
Running Adobe CC, latest versions

It gets wierder. After the Creative Cloud desktop app was updated it said a whole bunch of programs needed updating so I updated Premiere.
On restart it now wont even recognise the .MTS files it was happily reading earlier.
Apparently it is now an Unsupported Compression Type, which it clearly wasn't earlier.
Windows plays the file fine so this is ANOTHER Premiere issue I'm having now...

All 3rd party plugins gone after update !!! HELP APPLE !!!!!!

Similar Messages

Maybe you are looking for