All audio tracks have same waveform in cs5

Dear Friends,
When i import 1080p AVI with 8 different audio tracks in Premier CS5 all my audio tracks have save waveform as that of track no 1. I mean all tracks looks the same though they are different as 5.1 and stereo.
Please help and advice. Thanking You.

I really have no idea what you are doing or what your signal routing looks like, nor do I know how experienced you are with audio software and signal routings in general. What I now think you mean is that you can't monitor your input properly, you cannot hear the signal of the mic? Is that right? Or how did you arrive to the conclusion that none of your plugins work on audio tracks? Have you actually put an audio file on your audio track?
If you want to hear your input +processed through Logics' plugins,+ you need to enable Software Monitoring - just add its button (with a 'muted speaker' icon) to the transport by rightclicking the transport and ticking *Software Monitoring* on the list. Button grey=off, button green with dot in it=on.
Of course the channel strip/track you receive the input on should also have an output selected, or you will never hear anything.

Similar Messages

Channel strip plugin setting attaches to all audio tracks -- why

Hi all, an interesting thing happened today. Put down bass/drum/rhythm guitar trax. Rhythm guitar used a NI Guitar Rig 3 plugin -- a Vox amp with spring reverb.
So far, all is well.
Then I create a new audio track, for the lead guitar. Much to my surprise, it took on the settings of the rhythm guitar track -- the NI GR3 Vox amp with spring reverb.
I tried clearing the channel trip settings. I tried bypassing the plugin in the rhythm track. I created new audio tracks.
All to no avail -- all audio tracks retained the settings of that first track, that is Vox with reverb.
I finalyl created a new project and moved my tracks over. All is fine now, but does anyone know what might have caused that? And how to avoid in future?
I really enjoy Logic, but I have to wrestle with fear every time I open it -- a "what the f's gonna go wrong this time?" sorta feeling. I've started pricing out Pro Tools systems to be honest...

It sounds like you don't understand the concept of Logic - tracks and track objects.
You can have for instance twenty tracks, all set to an Audio Channel 1 object. The tracks themselves are independent, but all audio plays through that Audio Channel 1. This is great for, for eaxmple, comping up a vocal part. Note that audio channels are themselves monophonic, so you can have only one audio region playing at any one time.
This is different to independant arrange tracks that play through different audio channels..
So when you hit your "next track" key command, make sure you are using "Create Track with next object", and not "Create Track". Create Track just creates a new arrange track assigned to the same track object. The other one creates a new arrange track and assigns the next track object, so everything's fully independent.
This is a complexity in Logic that other DAWs don't have, but it's a great feature once you get your head around it. One reason I like Logic over other DAWs.
So arrange tracks and audio channels are not inextricably linked, as they are in other DAWs.

Premiere not showing all audio tracks in video file?

Hello,
The short version of my issue is that I am not seeing all audio tracks in my imported AVI video. I know they are there, but only one track is showing.
Longer version:
I have an application called Action! that is used for recording games. There is a setting on this application that allows you to record your microphone as a separate audio track. I made a 15 minute video using this. If i play this video in Action!'s media player, i can switch between my game track and my microphone track. If I play the video file in Windows Media Player, it plays both tracks. When I import this video file into Premiere (or Soundbooth) it only shows the Game track and not the microphone track. I cannot find a way to get to the microphone track. It just seems like it doesnt exist. Any thoughts?
Thanks in advance

music from library on drive/aiff

Move all audio track anchors at one time together

Move all audio track anchors at one time together..is this possible? I imported a remix, figured out the tempo. Now I want to make the tracks ( regions) all start on a downbeat to align with my measures..thx in advance for your assistance..

> How do you do that?
I'd begin by reading the Beat Mapping Track section in the Reference manual, p. 337...
> They are not referencing anything.
Oh, yes, they are: these anchors actually reference the first sample to be played... Presumably, they were recorded to start together and play along, right? When you dragged them, they all landed as new audio regions starting at the beginning of the same bar, since their respective anchors are all aligned at the start of the so-called region. These anchors will stick to the tick they landed to, whatever tempo change you make, unless you move the regions.
Or maybe you're missing something?...

How can I use ALL audio tracks in multiclip editing?

I want to be able to use all audio tracks after the multiclip cut.
It's only a two camera shoot, but I want to be able to use the ambient room sound from the second camera ... and control its level (in relation to the master audio track on the first camera) AFTER the cuts are made.
Is this possible in multiclip editing? And how does one go about it?
Apologies. I've spent an hour or so in the manual, and it isn't clear ... or I'm just not finding the right reference.
All ears,
Ben

Sorry if I'm steering you down a path you don't want to go or even if there's a better way but I wouldn't be ding complex audio mixing anywhere near the multiclip interface. Export your reference movie or nest the multiclip project into another sequence, bring in your additional tracks, get to work. Just my preferences, I put a bunch of rough keyframes in the audio tracks and enter some markers (and make a lot of paper notes). Then I go back using the large mixer window to do the fine tweaking.
Stick around for a couple of days, some other multiclip users with more experience than I will offer some more useful suggestions.
bogiesan

All of the inserts in audio tracks have stopped working

I do get audio input, but the inserts do not work.
Does anyone know the fix for this?
Thanks,
Murray

I really have no idea what you are doing or what your signal routing looks like, nor do I know how experienced you are with audio software and signal routings in general. What I now think you mean is that you can't monitor your input properly, you cannot hear the signal of the mic? Is that right? Or how did you arrive to the conclusion that none of your plugins work on audio tracks? Have you actually put an audio file on your audio track?
If you want to hear your input +processed through Logics' plugins,+ you need to enable Software Monitoring - just add its button (with a 'muted speaker' icon) to the transport by rightclicking the transport and ticking *Software Monitoring* on the list. Button grey=off, button green with dot in it=on.
Of course the channel strip/track you receive the input on should also have an output selected, or you will never hear anything.

How do I hear all audio tracks in multiclip at once?

Working in Final Cut 5. I've set up a multiclip with three angles and everything is running fine. However, in my sequence, I want to have all six audio tracks active at the same time, and then use the multi clip to cut the video. How do I do this without having to lay each one back in?

I'm interested in this as well. Any thoughts out there?

Recording to two audio tracks at same time

I am having trouble recording a vocal on track one and a guitar, (via second microphone)
onto track two. I am going through an Apogee, and I have phantom power enabled on both
mics. However when I click the record button on one track it seems not possible to click
the record button on the other track. I have input monitoring button selected on both tracks
and the main record button selected.
Any suggestions at all will be most welcome. I have looked in previous forums and read and
tried various options, but no luck at all so far.
Thanks very much

Hello to Data Stream Studio and howdy cowbell bill. Thanks you both for your replies
and it sounds like you are both in agreement as to what the problem is.
Keeping in mind what you suggested,
I went back onto Logic this morning, but I'm still having the same problem of not being able
to record enable two audio tracks simultaneously. I have checked both mics and both mic
cables, and the breakout cable that leads into the Apogee pre-amp. Those things are all OK.
I've now tried to back-track and to trouble-shoot what little I know. This is what I've done :
1: Shut down and re-opened Logic
2: Opened a new project.
3: Shut off the phantom power for both mics
4: Disconnected both mics and cables
5: Opened a new audio track (track one)
6: Assigned mic 1 to audio track one.
7: Assigned mic 2 to audio track two.
8: Re-connected cables
9: Turned the phantom power back on for both mics.
10: Enabled the input enable/monitor button for both tracks (in the track header)
11: Turned on the main record button in the transport bar.
12: Tried to turn on the record button for both tracks. (in the track header)
11: I can only turn on one at a time. As soon as I click one the other
one turns off.
I have the mixer turned on and can see that both tracks are in Mono.
I am wondering if the way I have the Apogee set up might be the problem?
I have the original Apogee Duet. Phantome power is displayed with two red LEDs
which show up on the front to the unit. Both are illuminated when phantom power is
powered on. I have the volume turned up fully for both mics (via. the Apogee control
panel that shows up on my computer screen). HOWEVER, when clicking the controller
knob on the top of the Apogee unit itself I don't seem to be able to see the two mics
being shown up on the computer screen at the same time. (I hope this makes sense).
I seem to remember a display that shows mic one icon, a display that shows mic 2 icon,
a display that shows the headphone/speaker icons, and a display that shows both
mic one icon and mic two icon.
Thanks for any help you might be able to give me on.
I am sorry this post is so long but I wanted to try to explain
the problem as clearly and as unambiguously as I am able.

Importing a project into PE 12 trial version, not all audio tracks play back!

I'm trying the trial vesion of PE 12. Imported a project that I had created with PE 9. Everything appears to have been imported, including all the audio tracks. But when i play it back, some of the audio tracks are completely muted, while others, are fine and I can hear it.
Any idea what can cause this?

With "muted" Audio Tracks, I would look at a few possibilities, and especailly with a Project created in an earlier version of PrE:
Open Audio Mixer, and look to see if any Tracks are Muted.
Play the Timeline, and observe the Levels in Audio Mixer, and also whether there is any movement of the "sliders" in Audio Mixer.
Observe which Audio Tracks your Audio Clips are, in the Timeline, and report those please.
Making sure that Keyframe Display is set to Volume in your Audio Clips, are there any Volume Keyframes?
I am sure that others will have a few more ideas, and questions.
Good luck,
Hunt

All audio tracks disappeared form the Timeline, but audio still works

Hi there.
I've been using Premiere for quite a while (I still have the 2.0 version), but this problem never occured before. I'm running Premiere on Win Vista.
I've been working on a project for a few weeks and eventually I got a version that was more or less final. Thus I tried to render everything a few times (Quicktime H264) but the render never succeeded because of an "API failure". Didn't manage to fix that, so I tried to render in wmv, just to check if it worked.
Well, it worked, but when render finished all the audio tracks had disappeared form the Timeline. I tried to find a solution on the web but couldn't find anything useful. No matters how much I scroll down and/or move the windows, the audio tracks just are not there. And the triky part is that I still can hear the sound when playing the sequence! I tried to add some empty audio tracks and Premiere apparently does it (it records it in the history), but no audio track shows up...
Any solutions?
Thank you

This sounds like a redraw problem, which is usually the fault of graphics hardware/driver. Try checking those.

Removing ALL audio tracks in a project

How do I remove ALL audio recorded in a .cp? I don't mean how
to compile w/o audio, I want to delete all tracks. I'd rather not
go through each slide and click each object and remove the audio
associated w/ it. I have lot's of audio that I want to get rid of.
Thanks.

Audio>>Advanced Audio

All my tracks have gone

Downloaded a CD from ipod store left my ipod on charge.Next day went to create a cd from the download and found that all my tracks both on the ipod and in itunes have been erased. don't think I caused the problem,getting on a bit in years but have had it for a couple of years and had no problems before when carrying out the same operation.
Any suggestions please.

How do I restore lost playlists - ?

Making Blue Ray with 2 audio tracks-Have a small dillemma

I just made a 90 min program that consists of 12 short movies (each on their own timeline). Audio trk 1 is 5.1. Audio track 2 is stereo. So far so good. When I made the disk and selected play all. Its starts playing. I switch the audio from Audio trk 1 (5.1) to 2 (stereo). When the first movie is done it switches back to trk 1 (5.1) for the second movie. I do not want that to happen. I want the entire program to be shown in stereo. Any idea what I can do to fix this little issue? Thank you.

Yes, Encore has a similar kind of bug when by default the 5.1 track is played for any fresh stream that is loaded.
Could you post a screen shot of the flowchart to show the navigation?
Meanwhile if you want to start by default with the second audio track, you can specify this either in the disc properties or while linking the individual timeline.
If you specify in the disc properties, then the setting will be applicable to the entire project.
For setting in Disc Properties do this:
Go to the disc Properties Panel and change the Audio to the desired track.
For changing the audio while linking the timeline, do this:
Click on the end action drop down and Go to the specify link and choose the desired audio track:
-Ramesh.

MPEG-4 ( H.264 ) Movies play ALL audio tracks simultaneously

In i-Tunes , when I try to play MPEG4's with multiple audio tracks (such as 1-english 2-director comment)both audio tracks play at the same time.
The files are MPEG-4's created by Nero Recode (AVC – HDTV profile).
There is no issue with any similar files with one audio track.
There is no issue playing these in VLC , WMP Mplayer, etc.
Is there an option to enable i-Tunes to allow me to select only one track?
Vista Ultimate 64-bit installed on a Core 2 Duo E6600 2.4GHz dual core CPU

Or, could someone explain how I might be able to view the file information in Terminal?

Two audio tracks with same label

I have two audio tracks labeled Audio3. Is this something normal or an anomoly? Can I correct this? Thank you for you help.

Vinay,
This is weird, but I don't know if it related to the Audio label issue. There seems to be no rhyme or reason to where the which audio track is used when I place an item into a video track. In this project I am using .mts files for my video and the audio has been going into Audio 2, except for the one marked in the image below, which is in Audio 3. When I tried to move it to Audio 2, it slipped up to Audio 1. This is throwing me off, because I have background music in Audio 3 and want a different audio level.

All audio tracks have same waveform in cs5

Similar Messages

Maybe you are looking for