All backend descriptions are already assigned in the system

Hi SRM Gurus ,
While Replicating the Vendor from the backend ' I am getting this Error as +'All backend descriptions are already assigned in the system'+ . I have checked the number Range both in backend and SRM its fine we have replicated lot of Vendors allready without any error .
My analysis :
we have the same vendor Created with diffrenet accounting group with diffrent address in SRM allready . But we are now created new vendor with new  accounting group and new address we are trying to Replicate the same in SRM but we  are getting that error , Is there any way i can do the sucess full replication with out any error.
The correct answer will be rewarded accordingly .
Thanks & Regards
Ganesh Sagar

We had a problem with number ranges

Similar Messages

  • BBPGETVD - All backend descriptions are already assigned in the system

    Hi together,
    My target
    I'd like to replicate vendors from R/3 with the same vendor numbers to the organizational structure of SRM.
    I execute the transaction: BBPGETVD.
    Settings:
    System: TERCLNT303 (defined Backendsystem)
    Supplier: 4100000005
    Object Id: 50000667 (PPOMV_BBP)
    x Only Transfer R/3 numbers
    Start Transfer
    error message "All backend descriptions are already assigned in the system"
    If I select: If R/3 Number assignment is not possible: Internal Number Assigmente then the system works and create:
    a) BP-Number in table: BUT000
    b) R/3 Vendor Number in table: VENMAP.
    Why I can't create same vendor numbers in tables: BUT000 and VENMAP ?
    Kind Regards
    Edited by: Hermann-Josef Wessels on Oct 31, 2010 9:00 PM
    Edited by: Hermann-Josef Wessels on Oct 31, 2010 9:15 PM
    Edited by: Hermann-Josef Wessels on Oct 31, 2010 9:54 PM

    Please can some one guide me here . I am having issue in replicating vendors this was working fine a couple of days back however it has just stopped working .
    The error it gives me is the same as
    all backend descriptions are already assigned in the system  I am maintaining the below number range please can some guide me 
    below is the SPRO path .
    Cross-application components -> SAP Business Partner -> Business Partner -> Basic Settings -> Number Ranges and Groupings
    Can some one also let me know where to check in ECC ??
    01    0000001999    0000009999    0
    AB    0000001000    0000001998    0
    MD    9000000000    9999999999    0

  • I cut and pasted a description from the Internet. It posted as a link in iPhoto. It seems to have made a global change--all my descriptions are now blue, underlined, and Times Roman 12 rather than Arial white. How can I get this back to the default?

    I cut and pasted a description from the Internet. It posted as a link in iPhoto. It seems to have made a global change--all my descriptions are now blue, underlined, and Times Roman 12 rather than Arial white. How can I get this back to the default?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Hi, I can't update my Photoshop in the CC. all other programs are working fine with the updates. only photoshop isn't.  I've already tried to uninstall, and install again and it didn't work.

    Hi, I can't update my Photoshop in the CC. all other programs are working fine with the updates. only photoshop isn't.  I've already tried to uninstall, and install again and it didn't work.

    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • Virtual hostname already assigned to another system on the network

    Sorry for the cross-post... I just want to make sure I get this in the right forum:
    I am having trouble getting past the cluster configuration setup in Clusterware 10.2.0.1.0 on SLES9 -i386.
    The following error explains it all:
    The virtual hostname(s), dl560-3-vip,dl560-4-vip, you have specified appears to be already assigned to another system on the network. Please ensure that the virtual hostname(s) that you use for each of the nodes in the cluster are not in use currently.
    Now if I remove the vip's from my /etc/hosts file, I can proceed to the next step... but I have to re-add them in order for it to resolve and continue.
    Thanks in advanced for your help.

    you shouldn't be able to ping those addresses .... ?Is that a question or a statement... :-) I'm not really sure.

  • No business area is assigned to the material

    HI SAP Gurus
    I  tryed to create  a Product cost controller (KKF6n). After I  typed the Product version,  I get this error "No business area is assigned to the material". 
    Could yo give me some information about this error.
    Thanks
    Emre

    I checked already. They are assigned.
    PLANT- DIV
    PLT    DIV    BUARE
    Z100   00     Z100
    VAL AREA - DIVISION
    PLT    DIV    BUARE
    Z100   00     Z100
    But what  I found out under
    IMG> E Structure >Assingment > Sales & Organization > Business Area Account assingment > Assign Business Area by Sales Area.
    The Sales Area is not  assigned to Business area and there is no possibility to assign it. (New Entries )

  • Error - Measures are already assigned to position (investment order )

    Hi,
    we need to delete investment orders from the investment profile(IM22). When i am trying to do from lower level i get the message "
    Error - Measures are already assigned to position
    Message no. AP086
    Diagnosis
    You have tried to move the partial tree with top item J290010035BS. However, budget or plan values have already been entered for it.
    System Response
    To avoid inconsistencies, the transfer is not carried out.
    May i know the possible reasons and what are aspects we need to consider before deleting the investment orders
    Best regards
    Medha

    Hi.
    Guido
    Thanks a lot for your reply. But our investment orders are distuributed already with budget. I think the note applies if the budget is not distributed to this fiscal year.
    Thanks in advance
    Medha

  • How can you ensure all mandatory fields are filled, before pressing the submit button?

    Hi all,
    I've got a complex form with many different pages (17 so far) and I'm using visible/hidden to change the layout so only 1 page appears at a time.
    What I want to do is have a better check for what mandatory fields have not been filled out in my form. The submit buttons checks that all of the mandatory fields have been completed, but if that's 1 field on page 1, searching through my entire document would cause the users to lose the will to live!
    I am after either returning more meaningful information to the user when a submit fails, or being able to run the mandatory check field every time the page changes. I already dynamically set most of the mandatory fields according to what is/isn't visible so adapting my form wouldn't take long but I have no idea how to get it to check if all the fields have been filled in.
    Many thanks,
    Tom

    Right, I have pretty much all of my validations working now... and here's the word you're waiting for... but, I am having a problem with fields that are already visible when the rest of the layout changes.
    Basically, one of the options above the field with the problem is being changed, which makes the layout above that field change. This is triggering the validate event.
    This wouldn't stop anyone using my form, but it is an annoyance.
    Anyone able to help?
    Many thanks,
    Tom

  • HT4972 My safari app won't open itunes apps page & the apple apps which are already downlaoded on the iPhone 4iOS when I purchased it have disappeared and can't download them again because safari msgs pop up reading "the site addy is incorrect!" please he

    My safari app won't open itunes apps page & the apple apps which are already downlaoded on the iPhone 4iOS when I purchased it have disappeared and can't download them again because safari msgs pop up reading "the site addy is incorrect!" please help

    Tried the iTunes App on my iPhone....Still nothing!
    Infact I have no "Apps App" to tap & open so i cannot view/purchase any Apps for my iPhone
    My wife's even tried downloading Apps to my iPhone from our iPad after syncing them up but all it seems to do is send me the App badge from our iPad to my iPhone but cannot open it because the App is still 'Waiting'...Waiting for what???...nothing!??...No download???...just a faded App which won't open? Apps that just sit & wait!??? It's not good when your trying to run a business for the 1st time & not good when its causing rows either! So what do I do? because its been like this for a year nearly now...:S

  • See which clips are already used in the sequence

    hi there,
    I am a complete newby for mac and fce
    I started a project for my dive video in the Filippines.
    I have like a 1000 clips in the browser.
    Is there a way in fce to see which clips are already use in the sequence and which are not?
    In pinacle studio they were marked with a red v

    This is a way to solve your problem.
    http://discussions.apple.com/thread.jspa?threadID=2283002&tstart=0

  • Itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.

    itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.

    Go to the Edit -> Preferences-> Playback
    In The bottom section of the page click the drop down menu by Play Audio Using and select Windows Audio Session or something other than "Direct sound" or whatever it displays. Click Okay. This worked for me! I hope it works for you too!
    Thanks,
    John

  • I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5.  I changed the name of the first library to iPhoto library 1 and now I all my photos are gone.  My operating system is Mavericks.

    I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5.  I changed the name of the first library to iPhoto library 1 and now I all my photos are gone.  My operating system is Mavericks.

    launch iPhoto wile holding down the option key and select the original library - when you create a new library of course it is empty
    And you seriously need to backup your iPhoto library and purchase and install iPhoto '11 version 9.5.x from the App store and download and run the iPhoto library upgraded \then run the new iPhoto - 7.1.5 is not fully compatible with Mavericks
    LN
    PS you also need to update your profile - it states that you have OS X 10.6.8

  • I recently tried to erase a seas gate expansion external harddrive and when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help,

    when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help.
    Running macbook pro 2.53ghz late 2010
    mountain lion
    8gbs mem

    I would try it on a PC and see if you can format it, then put it back on the Mac and try again. If it's not seen on a PC, then there's the strong likelihood that there's a hardware issue; either the bridge/chip set or the HD itself is dying/dead. There's also the small possibility that the cable is faulty, so I'd try a different cable too.

  • How to see all users who are allowed permissions for the specified entity ?

    How to see all users who are allowed permissions for the specified entity ? 
    And change user permissions for the current entity
    from Moscow with money

    Vincent,
    ... and how to change entity permissions for some users?
    from Moscow with money

  • How can i use the shared object already present in the system from java.

    explanation:
    Actually there are shared objects present in the jdk which is used by java itself.I want to know if i can use the methods in any library file(shared object) which is already present in the system.
    Or the question can be put this way how does the java call the native methods? (Can we do that explicitly) in our code.

    It isn't entirely clear what you mean by 'shared' objects and what the relationship with these shared objects and calling native code is.
    There are no shared objects in the Java language, only the java platform.
    The platform system properties are exposed via the System class (java.lang package).
    You are free to create your own shared objects by using static member access or some other mechanism.
    Your access to methods in any of the API's is dictated by the access type you have, normally public being the only completely open access allowing complete visibility.
    You can call native methods, thats what JNI is for. Calling native methods in classes other than your own is generally done using the API provided by the developer(s) of those classes.

Maybe you are looking for

  • How do I create a Podcast in Garageband?

    I'm new to the Mac OS. I open Garageband and click "Create New Podcast." The podcast creator opens, I click record by male voice, say something, click record button again to stop recording, press play but hear nothing. What am I doing wrong? My mic i

  • What is the best gaming controller to get?

    I've been a console gamer for a long time, so quite frankly a keyboard and mouse for gaming is very odd to me... I hate it actually. I want to get into gaming on the Mac, so which controller would be most compatible and work best with games from Stea

  • Is Creative failin

    Outside of what you actually think about the players or the problems you may or may not be personally having Creative is being blown out of the water by apple. I don't like Apple and I love my 40gb Zen Touch but for a company that wants to really mak

  • Missing and partially-missing elements when printing PDF's -- Problems began 3 days ago

    Source files and PDF's created from them are printing fine from Ai and PS, but the same Ai- and Ps-created PDF's opened in Acrobat Pro or preview app are not.  Elements are missing, some completely, some partially; half a word or half an image missin

  • Lowpass filtering an array of waveforms with different cutoff frequencie​s

    I'm trying to take an array of waveforms and have seperate filter settings for each individual waveform. For example, I want to have a 2 hz cutoff frequency on my thermocouple inputs and a 100 hz cutoff frequency on a strain gage input. When I try to