All .m4v files only import for 1 second (PRE 9/Windows 7)

Hi,
I'm a new PRE 9 user and am experiencing a really significant problem with importing .m4v files: Every .m4v I select ends at the 1-second mark and there does not seem to be any way to make the program see past that 1-second mark in the source file. Other file formats I've tried seem just fine, but most of the source material I want to use is already in .m4v files and have to think that this is some kind of bug.
Does anyone know what's going on here--and, more importantly, how to fix the problem so I can access the entire content of the .m4v files I want to use in PRE 9?
Thanks a lot and take care,
Alan

Hi Hunt,
Thanks for the rapid reply (and the welcome too). I think most of the files came from Handbrake (importing DVD content) if memory serves. All these .m4v files play just fine in Windows Media Player, QuickTime Player, etc.
I opened the properties for the last .m4v I tried to use (this morning) in PrE and the properties are listed as follows....
Type: MPEG Movie
File Size: 566.6 MB
Image Size: 718 x 370
Pixel Depth: 32
Frame Rate: 90000.00
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;00;01;09
Average Data Rate: 425.3 MB/second
Pixel Aspect Ratio: 1.1847
MediaInfo documents the same (.m4v) files properties as....
General
Complete name                    : C:\Users\Alan\Videos\Advent\Advent performances\Advent at MARPROG (Franklin's shoot) DVD 1.m4v
Format                           : MPEG-4
Format profile                   : Base Media / Version 2
Codec ID                         : mp42
File size                        : 567 MiB
Duration                         : 1h 6mn
Overall bit rate                 : 1 188 Kbps
Encoded date                     : UTC 2011-04-15 13:27:00
Tagged date                      : UTC 2011-04-15 13:43:34
Writing application              : HandBrake 0.9.5 2011010300
Video
ID                               : 1
Format                           : AVC 
Format/Info                      : Advanced Video Codec 
Format profile                   : [email protected] 
Format settings, CABAC           : Yes 
Format settings, ReFrames        : 4 frames 
Codec ID                         : avc1 
Codec ID/Info                    : Advanced Video Coding 
Duration                         : 1h 6mn 
Bit rate mode                    : Variable 
Bit rate                         : 1 093 Kbps 
Width                            : 718 pixels 
Height                           : 370 pixels 
Display aspect ratio             : 2.25:1 
Original display aspect ratio    : 2.25:1 
Frame rate mode                  : Variable 
Frame rate                       : 29.970 fps 
Minimum frame rate               : 9.990 fps 
Maximum frame rate               : 29.980 fps 
Color space                      : YUV 
Chroma subsampling               : 4:2:0 
Bit depth                        : 8 bits 
Scan type                        : Progressive 
Bits/(Pixel*Frame)               : 0.137 
Stream size                      : 521 MiB (92%) 
Writing library                  : x264 core 112 
Encoding settings                : cabac=1 / ref=2 / deblock=1:0:0 / analyse=0x1:0x111 / me=hex / subme=6 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=0 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=6 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / constrained_intra=0 / bframes=2 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=0 / open_gop=0 / weightp=2 / keyint=300 / keyint_min=29 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=20.0 / qcomp=0.60 / qpmin=3 / qpmax=51 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00 
Encoded date                     : UTC 2011-04-15 13:27:00 
Tagged date                      : UTC 2011-04-15 13:43:34 
Color primaries                  : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M 
Transfer characteristics         : BT.709-5, BT.1361 
Matrix coefficients              : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M 
Audio
ID                               : 2
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format profile                   : LC
Codec ID                         : 40
Duration                         : 1h 6mn
Bit rate mode                    : Variable
Bit rate                         : 91.0 Kbps
Maximum bit rate                 : 339 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Compression mode                 : Lossy
Stream size                      : 43.4 MiB (8%)
Encoded date                     : UTC 2011-04-15 13:27:00
Tagged date                      : UTC 2011-04-15 13:43:33 
Text
ID                               : 3
Format                           : Apple text
Codec ID                         : text
Duration                         : 1h 6mn
Bit rate mode                    : Variable
Bit rate                         : 1 bps
Stream size                      : 327 Bytes (0%)
Encoded date                     : UTC 2011-04-15 13:27:00
Tagged date                      : UTC 2011-04-15 13:43:34 
Also, new PrE project appear to default to: "NTSC-Hard Disk, Flash Memory Camcorders-Standard 48kHz" (which I'm assuming is the default, as I don't recall changing anything).
I hope this information helps. Any insights as to how to get past this problem (bug?) would be greatly appreciated.
Take care and thanks again for your help,
Alan

Similar Messages

  • Is xmp files only availble for RAW files?

    When we develop a RAW image with Camera Raw, we always get an xmp file with all the settings,
    But after I developed a JPG image, I saw the Camera Raw Settings icon appeared above the right upper corner of the image thumbnail in Bridge,
    however, I couldn't find the xmp file.
    Is xmp files only availble for RAW files? JPGs or TIFs don't have xmp files for their Camera Raw settings??

    Read-only didn't work for me, on a single jpg file, although it did lead to some interesting behavior.  Set the read-only attribute on a jpg file in Windows XP and then tried the following:
    1.  Opened in Bridge, then into ACR 5.4.  Performed some edits, then tried "Done", received permissions error and would not save edits.
    2.  Did the same except now invoked "Open", went into CS4 with edits intact and allowed saving out as different file.  However, the ACR edits were not saved within the jpg, as expected, nor was a xmp created.
    3.  Removed the read-only attribute, repeated (2).  Even though did not save file in CS4 the "Open" action did embed the edits into the jpg.
    So read-only doesn't really allow creation of a xmp file, other than perhaps temporarily for transfer to Photoshop.  It does lead to somewhat inconsistent behavior, in that I would have expected the "Open" to fail also since it could not bury the edits in the jpg.
    Richard Southworth

  • Only Imports 16 seconds

    I don't import music directly from CD's that much, but an album I have only imports 16 seconds of a song. Any suggestions on how to fix

    Hmmm. Worked after a couple tries. May have something to do with firewalls.

  • Some of my video files only play for a five second duration in QuicktimeX.

    A few video files I have only play the clip for five seconds, but when I play the same exact clips in VLC they work, it is only 3 or 4 video files, but it is a problem, also when you see the little video icon, you see the video, for the ones that only play for five seconds, you see blotches, and a grey picture. Is there any way to fix this problem? The file format is in .avi

    When trying to play open the inspector (CMD + I) and mention what the codecs are.
    Install (free) Perian 1.2

  • Porblems importing Canon C300 footage into Premiere Pro CC 2014: only import 30 seconds

    Hi! I'm having problems importing Canon C300 footage into Adobe Premiere Pro 2014. I'm taking the files directly from the media browser to I can only import the first 30 seconds of each clip.
    Why can be that? Do I need a specific plugin?
    Thaks for your help
    Begoña
    editor

    Since you did not perform the copy process yourself, my thinking is that maybe something went wrong when it was done.  Far too many people don't understand or follow the process that works.
    My recommendation would be to get your hands on the cards and do it again, making sure to use only Explorer or Finder for the task.

  • Itunes only imports 20 seconds

    When I put in a CD to add to music library, itunes only imports about 20 seconds or so of each song (although when you look at the bit that displays the CD info, it lists all the songs properly). I have tried with several CDs. It is driving me mad, please help.
    Maria

    hi Maria!
    I don't have a lot of information about your system, so my advice is going to have to be general. see:
    b noir, "Post-upgrade, only 2 seconds of each song...!" #1, 08:43am Aug 25, 2005 CDT
    love, b

  • HT4539 Why are all these apps only available for everything but my MacBook Pro?

    Why are all apps only available for phones or pads??I only want to use them on my MacBook Pro???

    Itunes does not sell any apps at all for computers.
    Itunes ONLY sells apps for iphone/ipod/ipad.
    If you want an app for your Mac, tehn shop in th Mac App Store

  • System file not suitable for running msdos or windows files ???

    Please help...
    I download the itunes 6.0.5 setup.exe file.
    I open it and I see a pop up with Quicktime and Itunes on it. It quickly loads and then a new application opens (a C:// black box
    It quickly gets an error (16 Bit MSDOS Subsystem Box) error reads that the system file is not suitable for running msdos or window files. Close or Ignore (neither allow me to load 6.0.5
    I am using windows xp

    You use probably a UFS file system, right ? Then in this case, use the "-i" option with a value less as 8192. 8192 is the default value for a UFS filesystem that is between 3GB and 1 TB size.
    But if you want to store 10M of files, UFS will be limited to 1M per TB : 64-bit: Support of MultiterabyteUFS File Systems (System Administration Guide: Devices and File Systems)
    In this case, use instead UFS a ZFS filesystem that supports 2^48 entries !!!

  • ITunes files only play for 2-10 seconds

    I added some new tunes from my hard drive into the iTunes Library. One time I did it by placing the files into the Library in the finder and then using the "Add to Library" command in iTunes. Another time I simply used "Add to Library" and navigated to where they were located on my desktop. The files' information shows them to be complete tunes and when you play one, the timer indicates the full track's time. But after anywhere from 2-10 seconds iTunes moves to the next tune. I can go thru an entire CD in about 30 seconds!
    The info about the files shows they were encoded using iTunes and QTime in various configurations - e.g. one reads "iTunes v4.7.1.30, QuickTime 6.5.2," and another reads, "iTunes v6.0.0.18, QuickTime 7.0.3.
    I'm using 10.4.3 with iTunes 6.0.1(3) and QuickTime 7.0.3.
    Any help is appreciated!

    trying to figure it out myself...annoying, makes me not want to buy anything.  Wish someone could enlighten me on this.

  • H.264 file only imports the audio

    Hi I am trying to import a H.264 file into my HD PaL studio pro project and all that seems to be happening is the audio is imported but not the movie
    Any help would be gratefully recieved
    Thanks
    sam

    Sam, I have just recently started using DVD Studio (in fact, this is my very first time), and I am having the same problem as you, the only difference being that it is an HD NTSC project instead of PAL. I was wondering if you have found a solution for the problem yet, or if maybe someone else out there reading this would be able to help?
    Thank you.

  • Read config file only once for beans

    I want to read onfiguration file Myconfig.cfg with many global values (server IP, port, database URL, pages, etc) I'm using a bean but every time a JSP or servlet create an instance of that bean all the data has to be read form disk...
    I know that if I put the code for reading the file in the init() method in a servlet it is called only once, but how do I read those values from another servlet or JSP, ???
    What is the best solution...

    You can put initiation parameters in your web.xml file and write a servlet that is called on startup. Once the values are read you can put them into the application scope. (i.e. application.setAttribute("jdbcUrl", jdbcUr); )
    Then in your JSP pages you can take them out by using the application.getAttribute("jdbcUrl"); method.

  • .mp4 file only imports audio track into assets. Where is the video?

    I have a 1080p WMV file that I converted to MPEG H.264 using MPEG Streamclip for use in DVD Studio Pro. When I import the file into DVD SP I only get the audio track. I opened the file in Quicktime Player just to make sure that I didn't export it incorrectly and the audio and video are both there. What am I doing wrong in DVD SP that is preventing the video from importing?

    As long as you're converting the original for DVD, try exporting to MPEG2.
    bogiesan

  • Lightoom 5.7 not importing ALL jpeg files when importing

    Hello, I am repeatedly having issues with Lightroom 5.7 64 bit on Win 7 computer on the import option from a file on hard drive. The file has 40 pictures, mostly all jpeg...and after the import - add function, only about 20 are imported. I have tried this multiple times and it still happens. Any ideas would be appreciated.

    There is an option in the Lightroom preferences to treat JPEG's next to raw images as separate images. If that option isn't checked, and some of your images are raw files, the raw files will be imported but the JPEG images will not. So check to make sure you have that option activated.

  • - Sample File : Lead Import For Sales Force Automation

    Hello All,
    Please can any one share a sample file for lead import in sales force automation.I need to test with a sample file and confirm that everything is file.I have a sample file that am presently having issues with.
    I will appreciate if anybody can help with the sampel file .
    Thanks

    Hello All,
    Please can any one share a sample file for lead import in sales force automation.I need to test with a sample file and confirm that everything is file.I have a sample file that am presently having issues with.
    I will appreciate if anybody can help with the sampel file .
    Thanks

  • User can see all resources, not only Permitted for his/her Organization

    Hi,
    I have set three self-serviceable resources as Permitted Resources for a specific organization. So if I click on Permitted Resources for that organization I can see only those three...
    When an user of that organization clicks on Request New Resources, all self-serviceable resources are listed to the user, not only the Permitted Resources. I thought the user could see only the permitted resources...
    If I log as sys admin and Request Resources for an user of this organization, I can see only the three permitted resources.
    I saw the sql statement that OIM run to list the resources:
    select
    obj.obj_key,obj_name,obj.sdk_key,sdk_name, obj_order_for,obj_auto_prepop, obj_type,
    obj_allow_multiple, obj_self_request_allowed,obj_autosave,obj_allowall,
    obj_rowver, obj_note,obj_autolaunch
    from obj obj
    left outer join sdk sdk on obj.sdk_key = sdk.sdk_key
    where obj.obj_key in
    select distinct obj.obj_key from obj obj
    left outer join sdk sdk on obj.sdk_key = sdk.sdk_key
    left outer join acp acp on obj.obj_key = acp.obj_key
    left outer join oba oba on obj.obj_key = oba.obj_key
    where
    obj.obj_self_request_allowed='1' or obj.obj_key in
    select obj_key from acp where act_key in
    select act_key
    from usr
    where usr_key= 5 and acp_self_servicable = '1'
    ) and
    obj.obj_order_for = 'U' and
    (obj.obj_type='Application' or obj.obj_type='Generic') and
    obj.obj_key not in
    select pop.obj_key
    from pop pop, pol pol, pog pog, ugp ugp, usg usg
    where
    pop.pol_key=pol.pol_key and
    pol.pol_key=pog.pol_key and
    pog.ugp_key=ugp.ugp_key and
    ugp.ugp_key=usg.ugp_key and
    usg.usr_key in (5) and
    pop.pop_denial='1'
    ) and
    obj.obj_key not in (
    select distinct obj.obj_key
    from obj obj, obi obi, ost ost, oiu oiu
    left outer join orc orc on oiu.orc_key=orc.orc_key
    where
    oiu.obi_key=obi.obi_key and
    oiu.ost_key=ost.ost_key and
    upper(ost.ost_status) <> 'REVOKED' and
    obi.obj_key=obj.obj_key and
    oiu.usr_key in (5) and
    obj.obj_allow_multiple='0'
    ) and
    obj.obj_key in
    select distinct obj_key
    from pkg
    where pkg_type='Provisioning'
    As you can see in the query above, if I change the snippet below the result is what I expect.
    obj.obj_self_request_allowed='1' AND obj.obj_key in
    Did I miss to set something or doing something wrong?
    Thanks,
    Renato.

    Sorry, but I do not understand your last reply. You mentioned the following:
    for option B, even when option A is unchecked, you can set self-request only for a specific organization when assign permitted resources.
    Isnt this what you wanted? You should set the resource as permitted resources in all the organizations whose users can request that resource. I have implemented this and it works just fine. It works for both types of requests. a) My resources -> request new resources and b) Requests -> Resources -> Grant resources.
    In case of b, depending on the organization to which the selected user belongs, the Resource is displayed. all resources are not displayed.
    So the solution is to uncheck in RO and put the resource under specific organizations permitted resources and make it self-requestable. It should work fine. Let me know your exact issue if it does not work this way.

Maybe you are looking for

  • Passing check box values to WHERE clause

    Hi, I have created a Data block - 'CONTACTS' (Database data block) and has database item - 'Code', 'Descr' The number of records displayed is set to 5. Value When checked - 'Y' Value When Unchecked - 'N' Check box mapping of other values - 'unchecked

  • White stretched dsiplay and flicker on HP pavillion sleekbook 15-b142dx

    Upper 1/3 of display is white and stretched out. Then it flashes and complete display is stretched. When connected to the HDMI port a remote display shows no problems. Do I need a new display? It started only when set at 60hz and worked for a few wee

  • I have Macbook Pro on order, should I wait for new "iBook"?

    I'll be using the mac for the iLife software mostly. iMovie, iPhoto and Garageband. How much do you think the price difference and speed difference will be? I'm pretty sure I'm sticking with the MacBook Pro. I've got the stock 1.83 on order, after re

  • Secure Datacenter Architecture (colo); Enterprise VLANing and IP management

    In the beginning stages of a datacenter migration, I am trying to uncover best methods for deploying a large scale datacenter in a secure Layer 2 and 3 environment. The end goal here is to achieve not only broadcast domain segregation, but also IP ad

  • Activation fails using automated phone system

    I've used a MAK to activate several Windows Server2012 R2 machines using the automated phone system. On one machine, I enter the confirmation ID and get the "Thanks, you're all done" message, but when I check using slmgr, it still shows Unlicensed. I