All my data on my phone got deleted so I restored it through Itunes and now my IMessage will not recieve nor send out messages through my phone number but my email. I've tried alot but non is really working, help please !!
All my data on my phone got deleted so I restored it through Itunes and now my IMessage will not recieve nor send out messages through my phone number but my email. I've tried alot but non is really working, help please !!
Ok. You don't have to select your number. Just check your email under your "grey" number and then at the bottom of this page you will see the option "Start new conversations from". Select your number.
Similar Messages
-
The Iphone "Iphone" could not be restored. This device isn't eligible for the requested build. Then I am given the option to click "More Information", or Ok. I have followed all of the necessary steps, but I haven't had in suecessful trials. Will someone PLEASE help, I am REALLY ready to use my fricken 280 Dollar Iphone! Lol. Thanks.
Bad news: It sounds as if you were sold a jailbroken iPhone.
Good news: File a SNAD with eBay. Make sure all your correspondence has been through eBay Messaging. The fact that the seller has been ignoring you will not sit well with them.
You will get 100% of your money back, including shipping. Paypal will simply seize his funds and return what is yours.
Lesson: Don't buy a used iPhone.
It's much worse for the seller. His PayPal and eBay accounts will be frozen. Until he squares up with both you and eBay, he's out of money and out of business. -
Hello all
I upgraded from Snow Leopard to the latest Mountain Lion OS and now my Wifi will not work. When I try and insert the password to my Wifi network states either 'connection timed out' or 'password and/or user name not recognised' please help...!Take each of the following steps that you haven't already tried, until the problem is resolved.
Step 1
Restart the router. Many problems are solved that way.
Step 2
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 3
From the menu bar, select
▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.
Step 4
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 5
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 6
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain. -
My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help? It is her computer, a iMac G3 or G4 with superdrive, the one with the ball shaped base. Thank you.
It's a tray loading drive, there should be a little hole next to it, just large enough for a paper clip. Stick the end of the paper clip in it and the tray should open.
Miriam -
I updated my Apple Iphone 3GS this morning and now my charger will not work. I can use my boyfirends just fine but mine will not worl at all. Why is this and is there anything that I can do?
Something is wrong with your charger or cable.
If it works with another charger, then it is not the iphone -
Updated to IOS6 and now my apps will not update on the Ipad2. I have to delete them and then re-install. But I have several hundred apps and this is cumbersome. Seems the new software is too buggy. I am telling people not to update software yet.
Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
I just got my iPod touch, I updated my iTunes and my iPod is still not showing up in iTunes. It is telling me the required software is not installed even though my iTunes is up to date
http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
Re-installed Kaspersky when reactivated account and now my Firefox will not open not even a message to allow or anything. Went to Mozilla to reload went ok till the install standard tellsme to close Firefox but it is not open, remember I could not open it ths the re-install and does not show in task manager or anything. Might be Ok if a valid message but nothing that makes sense.
hello, this crash is related to your graphics hardware & a recent windows update. please start firefox in safemode (by pressing the shift-key while it is launching) & go to ''firefox > options > advanced > general'' & disable hardware acceleration.
for some background on that issue you can also refer to [https://bugzilla.mozilla.org/show_bug.cgi?id=812683 bug #812683] -
How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.
Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
Please try each of the following, in order, until hopefully resolved:
Note the following are excerpts from an OS X Daily article.
* Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
* Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
* Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
* Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
* Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
* Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
* Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
* Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
* Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
* Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual. -
I clicked all the buttons in the file sharing window and now my iMac will not turn on.
I really goofed. I clicked all the buttons in the file sharing window (Screen sharing;File Sharing...Remote Login; Remote Management...Internet sharing) but I did not write down the IP address and now the computer will not turn on at all. Is there a way to roll back my stupidity and get this thing to turn on again?
There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.
-
I have updated my iOS and now my hotmail will not verify my password through apple mail app. I have reset password - tried new password and old password and it still gives me password incorrect. Hotmail works fine on Mac. Has anyone had this difficulty and been able to resolve it?
Did you try deleting the mail account, then adding it back? I've read a lot of times that is what needs to happen in order for it to work properly.
-
I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?
This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl -
i got an 11 inch macbook air for christmas and now i am regretting not getting the 13 inch is there any way i can upgrade to the 13 inch still ?
okay well another question the track pad on my 11 inch mac got stuck and wouldnt work and i took it to the apple store and had a tech look at it and he said it was working and i got home and it still wouldnt work so i took it back again to another tech and he said the guy before didnt fix it right and he said it was broken and that i needed a new track pad and he said he would replace it but they didnt have any trackpads in the store at the time but he fixed it enough that it barely works but he said i needed to come back to get a new trackpad because he fixed it enough that it would only work for a short period of time, so i went back the other day to another tech and told him and he said that since it still works they wouldnt do anything about it. but it barely works and barely clicks down should they fix it since the one tech told me it will only work for a short time and that if i came back they would replace my trackpad ? i have apple care and i am still under the 1 year warranty.
-
My logic board was replaced on my Mac and now my CS4 will not open. I re-downloaded it, gave the serial number, but it still won't open. It said that the licensing had expired. But this is not the case. Now what?
uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then properly install (do not migrate, use timemachine etc) using the installation files.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been no help.
- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
How to handle Directory in File receiver adapter
Hi I have a Mail (attachment) to File scenario in PI 7.11, where I need to send the message to one directory, if a certain condition is meet and an other direktory if that condition i not meet. More specifically, then my initial java mapping picks up
-
Tree upsets SQL report on same page
I have placed a tree on the same page as an SQL report and every time I collapse or expand a tree branch the report comes back with :- failed to parse SQL query: ORA-06502: PL/SQL: numeric or value error: NULL index table key value The URL given
-
Please please someone help me... I am a complete amateur and newbie to Keynote and have painstakingly created a slideshow for my sister's 40th birthday. It is fairly simple with transitions between slides, pictures/text and a soundtrack. All I want t
-
My Unlimited World is not letting me call German m...
I work for a German company and communicate with my friends there via mobile phones. I purchased Unlimited World with the primary thought of calling them with Skype. In the description of Unlimited World is says you may call any landline or mobile. W
-
I downloaded sqldeveloper for Mac OS X (I am running 10.8.3). When I typed "sqlplus" at the command line, it said "Segmentation fault: 11." What is happening? I'm a little surprised that nobody has had this issue before...