Allocation of cost from one business area to another business area

Hello friends,
Client Requirement: They have 5 business areas. one is for Head office and other 4 are business operations. Their head office expenses are booked under various cost centers in H.O Business Area. Now they want to allocate all H.O expenses to other business areas where business operations are carried on.
currently all allocations are made manually. now they want to incorporate in SAP.
is it possible to allocate the expenses which are booked under one business area to other business area???
pls give your ideas for how to allocate those expenses.....

They didn't have profit centre. so i cann't go for that option
Each operation area has many cost centres and internal orders... i have to allocate the costs from the cost center to internal orders.... if it is a same business area there is no problem we can create assessment cylce and allocate the cost.... the problem comes only when the allocation needs from one business area's cost center to other business area internal orders
for that the solution might be create Secondary cost element As you said and by using assessment cycle we could allocate the costs...
vijay

Similar Messages

  • Reposting cost from one value field to another value field in CO-PA

    Good day,
    Some of our FI postings to CO-PA were assigned to the wrong value field (in the PA transfer structure, the cost elements were in the wrong group and thus were recorded at the wrong value field).
    The number of documents invilved is huge - so we cannot reverse, change the configuration and post again.
    Is there a way to repost the costs from one VF to another like we can do with other cost objects?
    Thanks,
    Yoel.

    Hi,
    Please to the below thread on this aspect:
    Value Field adjustment program
    Regards,
    Kiron Kumar T.

  • Allocation of cost  from one profit center group to various profit centr gr

    Hi Experts,
    Here we  created one profit center as group function having various cost centers like common function Admin,Accounts,Legal,HR etc. Now we want to allocate the the cost from group function to various profit center group.
    Kindly give your valuable solution.
    J.Francis

    Hi,
    The allocation can be done through Distribution either in a fixed value or in percentages.  You can define a planning
    cycle for a sender profit center group and define the amount to be allocated to receiver profit center group.
    Define Actual cycle in the same way.  In periodic processing which may be every month/quarterly/half yearly,
    you can distribute the values from one group to the other.
    Best Regards,
    Sadashivan

  • Need to transfer more than 150 employees from one company code to another company code

    Dear Sir/Madam,
    I am new in SAP HCM . We need to transfer more than 150 employees from one company code to another company code due to some business requirement. Please suggest the process of transfer from one company code to another company code considering the other element like gratuity , leave entitlement, Bonus , Exgratia   etc.
    Your quick response will be highly appreciated.
    Thanks & regards,
    Babuna Ray
    Mob:- 9007295305
    [email protected]

    Dear,
    do not transfer employee from one company code to another issues are as under.
    1. Employees Form 16 you will get wrong value as per I Tax law because of company is having different PAN & TAN.
    2. Form 24 Q annual return data will not get properly/easily from SAP because of form 24 Q will run on Payroll area base/ company code base
    3. PF number is different for these 2 company codes then you are unable to submit annual return.
    4. If employee will get hike after the transfer case then system will post expenses period wise means if employee is having 2 different cost center related 2 different company codes posting will done as per this scenario is it accepted to Account Depatment? it is reflected in FICO through KSBB how can they manage expenditure which is related to previous month?
    Like this many points are there you have to study it and then suggest to your client.
    Regards
    Subhedar
    9158881202

  • Packet drop when clients moving from one Access point to another

    HI  All ,
    I am new to wireless . I am using  WS-SVC-WISM-1-K9  wism module and using 5 Access points . When my clients are moving from one access point to another we are getting packet drops .
    Kindly anyone suggest me what all configuration i need to verify on the controller  for Proper client roaming so that i can resolve my issues..
    Please let me know in case of any explanations requiered .
    Thanks  in Advance !!!
    Regards
    Angus

    For radius authenticated SSIDs, you need WPA2-aes or wpa1-tkip-CCKM. It depends on what the client supports.
    For pre-shared key, any WPA should be decent enough for roaming speed.
    If you're on WEP ... no comment.
    If you covered the above point, check if it's not a coverage problem. If the 2 APs coverage zone are not overlapping there will be a hole where you don't have signal and logically will have packet drops.

  • Asset transfer from One Business Area to another Business Area

    Hello,
    I am going to transfer my Asset from One Business area to another business area. So, I allready created a new asset and transfer through TCODE-ABUMN. But system gives me this error
    Posting with trans.type 320 not possible (No acquisition posted)
    Message no. AA324
    Diagnosis
    Transaction type 320 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
    Procedure
    Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
    can any one please tell me how I transfer my Asset from one business area to another Business area?

    Hi
    First make sure in your company code global setting in the OBY6 for company code wise ..Iin this screen  Indicator: Business area financial statements required if it is ticket
    Please  don't change business area for old asset . because it will effect the Business area balance sheet.  So create new asset and change business area at cost center level
    Finally transfer the balance from old asset to new assets in the ABUMN
                OR
    IF you want solution as per your issue ..Go to SPRO-> Financial Accounting-> Asset Accounting->Transactions-> Specify Default Transaction Types
    Here enter Default Transaction Types  300     Transfer of retir. old assets data from cap.asset
    in the filed of Transfer Between Areas
    I hope it will helps you
    Thanks and Regards
    sudharshana vamsi

  • Transfer of a Asset from one Business Area to Another Business area

    Hi Gurus,
    I am working for a Indian client in ECC6.
    presently we are using "ABUMN" TCODE to transfer asset from one business area to another business area. But, in this process we have to create a new asset or transfer to a existing asset with new business area. So, we are retiring the Old asset transferred and the total value and accm. dep is transferred to the new asset.
    Now, my client doesnot want to create a new asset, he wants the old asset no. to be retained and  keep track of the transfers from one business area to another.
    In Time Dependent intervals, i am unable to change Business are. it is only allowing to keep track of changes in Cost centre. Likewise i want for Business area.
    Can anybody help?
    regards
    Jaya

    Hi Jaya,
    we need to maintain the screen layout rules for the asset master data for the above issue.
    Path: SPRO, Financial Accounting, Asset Accounting, Master Data, Screen Layout, Define Screen Layout for Asset Master Data.
    Double click Define Screen Layout for Asset Master Data.
    Select your screen layout and double click "Logical field group" folder.
    Then double click on "3 Time dependent data" and double click "Field group rules".
    Here maintain the rule for business area exactly as it looks like for cost center.
    Hope this helps you....
    Regards,
    Sreekanth....

  • Allocation of cost from service cost center  to production cost center

    Dear sir ,
    Will I use to distribute the cost from service department to production department  and that cost centers also using for activity planing will get currect result in product costing ?

    Hello,
    Can you clarify what you want to do ?
    Allocation of cost from service cost centers to production cost centers can be done with the help of Assessment / Distribution cycles and you can do a activity planning using the same costs as well. The steps for activity planning would be as under:
    1. Create primary cost planning in the service and production cost centers (KP06)
    2. Create activity planning in the production cost centers (KP26) without any rate
    3. Run assessment / distribution cycles to transfer cost from the service cost centers to production cost centers (KSUB / KSVB), in case you are not transferring based on activity quantity then also do SKF planning in KP46
    4. Run plan cost splitting in case you have more then one activity type (do config for splitting structure beforehand) (KSS4)
    5.  Calculate Plan price for the production cost center activity types (KSPI)
    BR // SG

  • How to transfer costs from one WBS to another WBS?

    Hi,
    I want to transfer costs from one WBS to another. Remember two currencies are maintained viz. local and group.
    So how can i transfer the balance such that both the local currency and group currency balance gets transferred.
    Please ensure that the transfer should show 0 balance outstanding in CJI3 report.
    I need to transfer because WBS is holding some value which was not settled in the previous year.

    Hi
    You can transfer the Amount from One WBS to Another through KB11N. In this you Choose the Screen Variant as "_WBS/Network_" and do necessary steps.
    Hope it helps.
    Regards
    Babu

  • Transfer cost from one WBS to another WBS

    Hi,
    I have transfered Actual Costs from one WBS to another WBS manually using transaction KB11N - Manual Reposting of Primary Cost.
    But in S_ALR_87013542 report, Still the old WBS is visible with No costs.
    What are the consequence of doing the transfer and where it will affect?
    Can i delete the old WBS after transfer?
    Thanks
    Vinoth

    Vinoth G wrote:
    Hi,
    >
    > I have transfered Actual Costs from one WBS to another WBS manually using transaction KB11N - Manual Reposting of Primary Cost.
    >
    > But in S_ALR_87013542 report, Still the old WBS is visible with No costs.
    Once you do a transfer posting system will pass a credit entry (negative value) to the old WBSE. so the net effect will be zero.

  • I have a Windows 7 laptop using I tunes 64 and all my music files are on an external disc. I rarely use I tunes and at one point moved all my files (including the music files) from one external disc to another without considering what affect this wou

    I have a Windows 7 laptop using I tunes 64 and all my music files are
    on an external disc. I rarely use I tunes and at one point moved all my files
    (including the music files) from one external disc to another without
    considering what affect this would have on the I tunes library. When I eventually
    attempted to use I tunes, every selected a song from the library resulted in a
    message stating that the file couldn't be located. After following some of the procedures
    explained in this community I was able to reconnect the library back to where
    the associated music files are presently stored. However, there are still 2
    problems that need to be corrected. 1) Every song file now has a duplicate. One
    file works and the other file will result in the same message stating that the
    file couldn't be located. Before there were 4,000 songs in the library, now
    there are 8,000 songs. I need to eliminate the 4,000 dead song files. 2) All
    the playlists are still associated with the dead song files which makes the
    playlists unusable. Can the playlists be reconnected to the usable files
    without manually having to recreate them? Thanks in advance for the help.
    sdkr

    So am I understanding correctly?
    You used your iPod as a hard drive (drag and drop) instead of having iTunes install the music?
    If you used drag and drop your choices are different than if you used iTunes to transfer.
    Good luck!

  • I have a document made up of separate PDF files which reside in a folder and are linked to each other via hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I link from one PDF file to another and use the "Previous View" button

    I have a document made up of separate PDF files which reside in a folder and are linked to each other via hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I link from one PDF file to another and use the "Previous View" button to navigate back to my starting point the bookmarks are replaced by "page thumbnails". Is there anyway to stop this from happening?

    Hi Pusman,
    While setting up the links, if you choose to open the file in a new window then you won't face this issue, then you can simply switch to the previous file and bookmark view will remain as it is.
    Does that helps with your query?
    Regards,
    Rahul

  • When I copy and paste from one source material to another  within adobe reader, all the words are in one sentence. I have to take extra time to separate  the words using the space bar. Can this be fix?

    When I copy and paste from one source material to another  within adobe reader, all the words are in one sentence. I have to take extra time to separate  the words using the space bar. Can this be fix?

    Hi Bernie,
    Are you trying to copy and paste from a pdf to another pdf?
    Regards,
    Rave

  • What components of VM are lost after its migration from one physical host to another?

    Hi, I found this post very helpful for me, it is very easy to understand about the live VM migration. I have a confusion regarding VM migration that if any
    VM is migrated from one physical host to another what components of VM (vCPU, vBIOS, vRAM, vHD, vNIC, OS, Apps) will be changed?
    Kindly help me to understand that:
    1.Will Operating System running on VM be changed? 2. Will BIOS and Boot Loader information be changed?
    Thanks Looking forward for your response.

    Just to make sure we're talking about the same thing. We're talking about "live-migration" not VM conversion from one hypervisor to another, like a VM from VMWare or XenServer to a VM on Hyper-V, right?
    As mentioned above, when a VM is
    live-migrated from one Hyper-V host to another, nothing changes. Bios does not change. A
    Gen1 VM with traditional BIOS firmware will not turn into a Gen2 machine with UEFI firmware for example. 
    Boot loader will not change when a VM is live-migrated from one Hyper-V host to another. 
    MAC address on VM NICs will change when a VM is live-migrated from one Hyper-V host to another, unless the VM NIC is configured with a static MAC address. A Changed MAC address will be interpreted by the VM as a new NIC, which will lose its old IP settings.
    Stopping and restarting a VM on the same Hyper-V host changes nothing about the VM synthetic hardware such as NICs, BIOS firmware, or its internal startup files like boot loader. 
    Stopping a VM, and restarting it on another Hyper-V host changes nothing except the VM NIC's MAC address if it is configured to have a dynamic MAC address as described above.
    Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
    Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

  • Transfer of Customer balance from one profit center to another profit cente

    Hi,
    Actually we  are working in SAP version 4.7, and now i want to transfer some accounting document from one profit center to another profit center like in a customer a/c lots of documents are showing in different profit balance and right now i want to change the profit center in some documents, pls advice how can we do the same in Detail if possible provide any user manual related to that.
    Thanks  & Regards
    Sandeep

    Once again, this are you possibilities:
    You can use the PCA allocations like 3KE5 (assessment) or 4KE5 (distribution) or the manual PCA posting trnsactions 9KE0 or 1KEL.
    If you speak about cost element accounts that are assigned to real account assignment objects and you have changed the assignment of the profitcenter to the CO-object (like in the cost center master data, WBS element, internal order master data and so on) you can repost the respective accounting document into PCA. Please have a look in SAP note 858363 for more information regarding that.
    Best regards,
    Andreas

Maybe you are looking for