Allocation structure changes at settlement (KO88)

Guys,
Here's a question from the PM contingent...
Is it possible to determine the <i>allocation structure</i> at the point of performing <i>settlement</i> for a PM order (e.g. KO88).
I've had a quick look for user-exits, but couldn't find anything.
Thanks in advance

Allocation Structure is define under settlement profile and this settlement profile is assigned to PM order Type.
Pl check and define your allocation structure and assinged to you allocation rule .
Thanks
Rajiv Pandey

Similar Messages

Error In allocation Structure when doing settlement to GL from WBS

Hi All,
I got this error message. What should i do? I try to check my allocation structure...but it seem correct.
Complete allocation structure Z3
Message no. KD503
Diagnosis
During settlement, the system puts the sender debits into groups (assignments), which are settled using the same settlement cost element. The settlement assignment is made in the allocation structure, which is stored in the settlement rule for the sender (under settlement parameters).
Cost element 901000 cannot be assigned to a settlement cost assignment in allocation structure Z3, and therefore it cannot be assigned to a settlement cost element.
Procedure
Possible solutions are as follows:
If the posting under cost element 901000 was made to the sender because of an incorrect entry, and you can reverse the posting, and do not need to update the allocation structure. You only need to reverse the incorrectly assigned posting before repeating the settlement. Exception: For an investment measure with a line item settlement, you need to extend the allocation structure, even after the reversal.
If the posting was made correctly, you can do the following:
a) You can assign a different allocation structure to the sender: In the master data maintenance for the sender, choose "Settlement rule -> Goto -> Settlement parameters" and then enter a different allocation structure.
If necessary, also check whether the correct allocation structure is entered in the settlement profile. The allocation structure is defaulted in the settlement profile when you create sender master data or when you maintain the settlement rule.
You can update allocation structure Z3

Hi Sreenivas ,
The accounting document looks weird :
Hi,
Settlement profile : ZPS001
GL, CC, Order, WBSE and FXA optional
Document type : SA (GL Account doc)
Distribution rule : 10
Residence time : 24
Allocation strucutre Z3
Default object type : FXA
tick on % settlement and equivalence no
to be settled in full
Allocation structure : Z3
Assignment : 1.Labour ,2.MAterial, 3. Subcontract
Source : 1. PSlabour , 2.PSmaterial 3. PSsubcon 4.Cost
Settlement cost center : FXA (ticl by CE), CTR (settlement cost element 90200) ; ORD (Settlement cost element 902001); GL put 747100f
I already successfully settle from WBS to GL 747100(settlement receiver) However, when i check FB03 it shows that
GL account 747100
Posting key 40
Amount 25000
GL Account 747100
Posting key 50
Amount -25000
What the problem ?
Cheers,
Nies

Message no. KD503 - Complete allocation structure K1 for Internal Order

Hi,
During Internal order settlement through KO88 I am getting this error as :
Message no. KD503 - Complete allocation structure K1
Diagnosis :
During settlement, the system puts the sender debits into groups (assignments), which are settled using the same settlement cost element. The settlement assignment is made in the allocation structure, which is stored in the settlement rule for the sender (under settlement parameters). Cost element 430500 cannot be assigned to a settlement cost assignment in allocation structure K1, and therefore it cannot be assigned to a settlement cost element.
Procedure :
    Possible solutions are as follows:
    o   If the posting under cost element 430500 was made to the sender because of an incorrect entry, and you can reverse the posting, and do not need to update the allocation structure. You only need to reverse the incorrectly assigned posting before repeating the settlement. Exception: For an investment measure with a line item settlement, you need to extend the allocation structure, even after the reversal.
    o   If the posting was made correctly, you can do the following:
a) You can assign a different allocation structure to the sender: In the master data maintenance for the sender, choose
    "Settlement rule -> Goto -> Settlement parameters" and then enter a different allocation structure. If necessary, also check whether the correct allocation structure is entered in the settlement profile. The allocation structure is defaulted in the settlement profile when you create sender master data or when you maintain the settlement rule.
-   You can update allocation structure K1
The same configuration in Development Server there is no error but problem occurs in Quality server. Here the process is Internal Order creation - Creation of Reservation through MB21- Goods Issue against reservation through MB1A and finally settlement through KO88. During settlement this error occur. In configuration setting of allocation structure under Internal Order I have mentioned only revenue settlement (as per business) against assignments. Under source mentioned cost element group and under settlement cost elment Receiver Cat is "CTR" and tick "By Cost Element".
During MB1A i.e, goods issue accounting entry is generated as
81(Dr). 430500 Constimptuion Saprae and Stores
99(Cr). 310411 Inventory Machinery and Spare.
During settlement this debit figure should credit. But not allowiing to credit. Even in configuration under settlement cost element if I remove the tick of "By cost element" and mention secondary gl account whose cost element category is 21, still showing the same error in QA server. What may be the probabale solution ? Even if i remove allocation structure K1 from settlement profile 20 still same error exist. How this link gets during settlment inspite of removing allocation structure from settlement profile...
NB.. COPA is not implemented in our company. So PA structure should not arrise here....
Thanks & regards,
Samrat
Edited by: Samrat Roy on Aug 30, 2010 7:28 PM

Hi Samrat,
The issue is very simple.. Cost element 430500 is posted in your IO...
While settling you have 2 options... Either you can credit the original GL account 430500.. This happens when you tick "By Cost element".. This you have done already...
2nd option is not to tick "By Cost element" and assign a secondary cost ele category 21...
But for any of these options to work, you have to include GL 430500 in the "source"... The above 2 options apply only to those GL accounts which are mentioned in the "Source".... for rest of the GL accounts, system gives this error
Include 430500 in your "source" cost ele group.. Error will be resolved
Regards
Ajay M

Error in AUC Settlement -KO88

Hi,
Here in allocation structure -for source,i have given one cost element a/c # 809001
for settlement cost element,i have given diffferent costelement 809002
Note:This is because,we want all debits to capital internal orders through a/c # 809001 and all settlements to AUC through 809002(I gave this in allocation structure,aginst -FXA.
While doing the AUC Settlement in KO88,i am getting the below error.Kindy advice me how to fix this issue.
Define a settlement cost element for receiver type FXA
Message no. KD506
Diagnosis
In allocation structure A1 (controlling area 1000), you did not define which cost element should be used when settling costs/revenues of the sender. Nor did you define receiver type FXA.
Procedure
Assign a different allocation structure to the settlement sender (-> Master data -> Settlement rule -> Goto -> Settlement parameters), or maintain allocation structure A1.
Thanks
Supriya

Hello,
OKO6, hope you must have defined your allocation structure properly.
Please go to OKO6,
select your allocation structure.
click on assignments.
select the assignment relevant
double click on settlement cost elements
Put receiver category FXA
Select if you want to settle it to the same cost element then tick by cost element.
Otherwise, if you have already created settlement cost element you can use that CE created with cost element cateogyr 21 (KA06)
But you cannot use both (either you can tick primary cost element or secondary cost element)
Please recheck your settlement profile settings and order type settings.
Hope you should be able to solve
Regards,
Ravi

We are getting the following error "Complete allocation structure GA"

Hi,
Please help on the below issue:-
We are carrying settlement of order (Period end activities ) for CO88 . We are getting the following error complete allocation structure GA.
Please guide us.
Regards
Srinivas

Hi,
Go to Allocation structure and maintain the Source and Settlement cost element for various cost groups in the structure.
And maintain this Allocation Structure in the settlement profile for your Production/Process orders.
Regards
Balaji

Error : complete allocation structure while doing Ko88 settlement.

Message no. KD503
Diagnosis
During settlement, the system puts the sender debits into groups (assignments), which are settled using the same settlement cost element. The settlement assignment is made in the allocation structure, which is stored in the settlement rule for the sender (under settlement parameters).
Cost element S10100 cannot be assigned to a settlement cost assignment in allocation structure A2, and therefore it cannot be assigned to a settlement cost element.
Procedure
Possible solutions are as follows:
If the posting under cost element S10100 was made to the sender because of an incorrect entry, and you can reverse the posting, and do not need to update the allocation structure. You only need to reverse the incorrectly assigned posting before repeating the settlement. Exception: For an investment measure with a line item settlement, you need to extend the allocation structure, even after the reversal.
If the posting was made correctly, you can do the following:
a) You can assign a different allocation structure to the sender: In the master data maintenance for the sender, choose "Settlement rule -> Goto -> Settlement parameters" and then enter a different allocation structure.
If necessary, also check whether the correct allocation structure is entered in the settlement profile. The allocation structure is defaulted in the settlement profile when you create sender master data or when you maintain the settlement rule.
You can update allocation structure A2

Dear,
Please refer my reply in this thread,
Error in Rework order settlement
Regards,
R.Brahmankar

KO88 - message KD503 'Complete allocation structure ZD'

Hello,
Need some help regarding settlement error KD503 a user is getting via KO88. User made posting to an incorrect primary cost element (611010). That cost element is NOT included in the allocation structure and it should not be included. The user reversed out the incorrect posting and tried to settle the IO. The KO88 transaction still yields KD503 error. Any ideas what the problem is?
Both transactions were made in currency 'SGD'. When running S_ALR_87012993 to check line item total for 611010 in IO, balance is 0 in 'SGD' but $.06 in CO area currency. Would this be causing the issue?
I'd appreciate your immediate help! I've attached files in case it helps.

Hi Mathew
Nice to be talking to you again
The balance of .06 is not the issue.. You posted a line item in the IO... And then reversed it
So, from system's point of view, it has 2 line items in the IO to be settled..
You will have to include this cost element temporarily in your allocation structure, as a formality.. Once the settlement is done, you can remove it again
Include this Cost ele under any assignment in your allocation structure.. Impact would be null because the 2 line items nullify each other
Br. Ajay M

While Doing Production Order Settlement "Complete Allocation structure" :

Dear Experts
I am Getting This Problem ,
please give me A suitable Solution.
I am created Another Allocation Structure And Assigned to Settllement Profile . But it is not trigering. Not Capturing That allocation
Complete allocation structure Z1
Message no. KD503
Diagnosis
During settlement, the system puts the sender debits into groups (assignments), which are settled using the same settlement cost element. The settlement assignment is made in the allocation structure, which is stored in the settlement rule for the sender (under settlement parameters).
Cost element 40512006 cannot be assigned to a settlement cost assignment in allocation structure Z1, and therefore it cannot be assigned to a settlement cost element.
Procedure
Possible solutions are as follows:
u2022 If the posting under cost element 40512006 was made to the sender because of an incorrect entry, and you can reverse the posting, and do not need to update the allocation structure. You only need to reverse the incorrectly assigned posting before repeating the settlement. Exception: For an investment measure with a line item settlement, you need to extend the allocation structure, even after the reversal.
Edited by: rajamallu on Jul 2, 2010 10:41 AM

Hi,
within allocation structure customizing you create assignments for allocation structure Z1.
Each assignment has a source (cost element, cost element range, cost element group).
The cost element 40512006 is not included in the source definition of allocation structure Z1 but there are values to be settled available on your sender.
Thus they cannot be settled and thats why the message occurs. So maintain alloc. structure Z1 completely.
Best regards, Christian

Change of Source Structure for Partial Settled WBS elements - CJ02

Hi
As per standard SAP, the change of source structure under settlement perameters of WBS element is not supported when the settlement of WBS element is done either partial / full.
However, the client needs this change by doing any Z-Development as one time activity (since the source structure was changed for certain WBS elements as per change in business process).
Can i Know procedure to do the Z development to modify the source structure for partial settled WBS elements and also let me know the any side effects in this regard.
Regards
Anil

Hi Anil,
I agree with Ajay. You can try to change it in Debugging mode.
The values are handed over from include LCJWBF5Q (form project_settle_single using)
Some customer have also made a modification as a permanent solution.
Unfortunately in the standard it is not possible.
regards Bernhard

Allocation Structure, Settlement issue

Dear All,
I have created a Allocation Structure with following details:
Allocation Structure: XX
Assignment: 01, 02, 03...
Co AREA: YYYY
In Source: I assigned relevant Cosat element groups
In Settelment Cost Elements: I assigned Secondary Cost elements
I have maintained the Settlement rule to settle WBS to CTR in CJ20N.
I have also checked that Allocation Structure XX is comming in Settlement paramters in the WBS (CJ20N)
After few postings on WBS element i get an error "Maintain sources for allocation structure A1 (this is pointing to a different allocation structure) in controlling area YYYY"
Ques 1: Is there any other config to be maintained required to Settle the Project to CTR.
Ques 2: In the settlement Profile what Document type i need to maintain?? Is this mandatory?
Ques 3: Is it must to create a source structure?
Warm Regards,
Jatinder

Dear Gokul,
Yes this is newly configured allocation structure.
I have created a new settlement profile (where i have also assigned the new allocation structure) and assigned the Project profile.
Regards,
Jatinder

WBS settlement issue:Complete allocation structure A1.Message no. KD503

hi all
I created an WBS 600041 and through FB60 posted the JV by assigning the WBS 600041.
Then I saw in CJI3 the posting is done and it is showing there and I created a settlement rule and gave the 100 % cost settlement on AUC and saved it. Now when I go to CJ88 and do the actual settlement and gave all the parameters for full settlement and execute it is giving the following error
Complete allocation structure A1.Message no. KD503
Is this problem due to cost elements? How do I go about it.please suggest.
kind regards
Aman

HI,
Check your allocation structure OKO6 transaction. see whether your allocation structure is having the expense cost element you posted listed in it
OKO6- select your allocation structure-Assignments-source
Here the GL account should be listed
Regards,
Radha

Allocation Structure in CO Assignment Settlement Missing

Hi,
Pls help i am facing an issue to allocation Structure in CO Assignment Settlement while CO88
For referance error massage no. KD506. i got to know i need to assign the cost elements but where and which ? That help i need from experts with bit more understandable. If possible document with screenshots is help to get resolve the issue.
Thanks in advance.
Milind Joshi

Hi...
if you double-click on the message it will show you what are the cost elements that are not assigned yet.
You need to access the allocation structure you use (it should be in the error message) and proceed with adding the respective cost element to complete the settlement. (transaction OKO6->pick allocation structure)
Hope it helps.
Panagiotis
ps...in case you still have issues could you write down the entire message as it appears when you double click on it?

Allocation Structure

Hi,
When we execute the T.code KO88(Order Settlement for AUC), showing the below Error Message.
Complete allocation structure A1
Message no. KD503
Diagnosis
During settlement, the system puts the sender debits into groups (assignments), which are settled using the same settlement cost element. The settlement assignment is made in the allocation structure, which is stored in the settlement rule for the sender (under settlement parameters).
Cost element 410006 cannot be assigned to a settlement cost assignment in allocation structure A1, and therefore it cannot be assigned to a settlement cost element.
Procedure
Possible solutions are as follows:
If the posting under cost element 410006 was made to the sender because of an incorrect entry, and you can reverse the posting, and do not need to update the allocation structure. You only need to reverse the incorrectly assigned posting before repeating the settlement. Exception: For an investment measure with a line item settlement, you need to extend the allocation structure, even after the reversal.
If the posting was made correctly, you can do the following:
a) You can assign a different allocation structure to the sender: In the master data maintenance for the sender, choose "Settlement rule -> Goto -> Settlement parameters" and then enter a different allocation structure.
If necessary, also check whether the correct allocation structure is entered in the settlement profile. The allocation structure is defaulted in the settlement profile when you create sender master data or when you maintain the settlement rule.
You can update allocation structure A1
We have assigned Cost element for Receiver Cat. FXA.
What is the Problem?
Thanks in advance

In the allocation structure you need to include the source CE 410006.
Allocation Structure>Assignments (double click)>Source (double click)
Here in source you should have the CE mention in From else you should have created a CE group including this CE.
And now for this source ensure you've maintained the Settlement cost element (for FXA) either 'By Cost Element' or Settlement cost element.
Regards
Sreenivas

Pa allocation structure for pm orders

hi fico experts,
can any one tell us how to configure the pa allocation structure for pm orders for revenues billing thru dip profile use for service orders.
pl help
thanx in advance
regards
srihari

hi
I need to post to COPA at the time of settlement of PM order thru KO88 with multiple order line items in PM order.
to clarify further,
Currently I am able to do settlement to cost center as per settlement rule in pm order with one order line item, when i have 2nd line item in same order, we are not able to do settlement thru ko88 because this has been linked to dip profile.
pl revert if u need more info
thanks in advance
regards
srihari

Complete Allocation Structure A1

Hi everyone,
I have a problem concerning settlement of orders. Running transaction va88 gives me an error message stating that I should complete allocation structure a1. However, this is not the allocation structure I want to use. The message says that I can assign a different allocaton structure to the sender by chosing Settlement Rule --> Goto --> Settlement Parameters in the master data of the sender.
Now my question is where to find the master data of the sender!? Thanks for your help!
Regards,
Martin

Hi,
I have solved this issue now. Changed the allocation structure. Now I still have one problem concerning an account which is not maintained in the strucutre. However, to assign this cost element to the right part of the structure is something my controlling people have to figure out.
Thanks anyway for all you help.
Regards,
martin

Allocation structure changes at settlement (KO88)

Similar Messages

Maybe you are looking for