Almost got VPN to work, but Auth failing?

Hi,
I almost got VPN to work, but I have one last error. Here is, what I did so far:
1.) Configured VPN via Server app
2.) Enabled PPTP like described in Apple support doc
3.) VPN Server is reachable within my home network
4.) VPN Server is reachable from outside my home network
I'd be more than happy if anyone could provide me with some hints on how to fix either of the following two errors
When I try to connect via L2TP (From in- or outside the network), I get the following error:
Aug 29 22:42:17 server racoon[164]: Connecting.
Aug 29 22:42:17 server racoon[164]: IPSec Phase1 started (Initiated by peer).
Aug 29 22:42:17 server racoon[164]: IKE Packet: receive success. (Responder, Main-Mode message 1).
Aug 29 22:42:17 server racoon[164]: IKE Packet: transmit success. (Responder, Main-Mode message 2).
Aug 29 22:42:17 server racoon[164]: IKE Packet: receive success. (Responder, Main-Mode message 3).
Aug 29 22:42:17 server racoon[164]: IKE Packet: transmit success. (Responder, Main-Mode message 4).
Aug 29 22:42:17 server racoon[164]: IKE Packet: receive failed. (Responder, Main-Mode Message 5).
Aug 29 22:42:20 server racoon[164]: IKE Packet: transmit success. (Phase1 Retransmit).
Aug 29 22:42:20 server racoon[164]: IKE Packet: receive failed. (Responder, Main-Mode Message 5).
Aug 29 22:42:23: --- last message repeated 1 time ---
Aug 29 22:42:23 server racoon[164]: IKE Packet: transmit success. (Phase1 Retransmit).
Aug 29 22:42:23 server racoon[164]: IKE Packet: receive failed. (Responder, Main-Mode Message 5).
Aug 29 22:42:26: --- last message repeated 1 time ---
Aug 29 22:42:26 server racoon[164]: IKE Packet: transmit success. (Phase1 Retransmit).
Aug 29 22:42:26 server racoon[164]: IKE Packet: receive failed. (Responder, Main-Mode Message 5).
Aug 29 22:42:38: --- last message repeated 1 time ---
Aug 29 22:42:38 server racoon[164]: IKE Packet: transmit success. (Phase1 Retransmit).
Aug 29 22:42:38 server racoon[164]: IKE Packet: receive failed. (Responder, Main-Mode Message 5).
However, when I try to connect via PPTP (no matter if from in- or outside my network), I see the following error:
Aug 29 22:27:18 server pppd[16843]: The remote system is required to authenticate itself
Aug 29 22:27:18 server pppd[16843]: but I couldn't find any suitable secret (password) for it to use to do so.
Aug 29 22:27:18 server vpnd[16413]:    --> Client with address = 192.168.1.226 has hungup

I have not yet tried the VPN server in Lion, but I would normally associate IKE traffic with L2TP style VPN connections and not PPTP connections. This might indicate the remote client is trying to make an L2TP connection and you have not yet setup that properly with the same shared secret password at both ends (this different the actual users login password).
Or of course you can correct the remote client and set it to use PPTP.

Similar Messages

  • SMTP works, but POP3 fails

    I've been a Thunderbird user for around 8-10 years now, and I use it with multiple email accounts. I've run into a configuration issue I've never seen before, and I cannot find a solution (so far).
    I changed my broadband ISP from Comcast to Frontier. With Frontier, of course, I get an email account. I can access and use the account just fine via webmail. However, when I manually configure in Thunderbird (autoconfigure produces the wrong settings), password authentication fails,
    When I try Advanced Configuration, SMTP works, but POP3 fails.
    I contacted Frontier support to verify the correct settings. They are as follow:
    POP3: pop3.frontier.com, SSL/TLS, Port 995
    SMTP: smtp.frontier.com, SSL/TLS, Port 465
    I'm using full email address for the user name. He double-checked the password on the POP3 server, and it's correct. I also disabled my firewall, but it didn't help.
    I'm perplexed as to why SMTP should work but not POP3.
    They do not support IMAP.
    Any ideas, anyone?

    SMTP works but pop fails:
    so you can send but not receive?
    Please provide info:
    Help > Troubleshooting Information
    click on 'Copy text to clipboard'
    paste info into this forum question
    you can edit/remove all info on fonts and printers but nothing else.
    When you try to Get Messages, do you get an error message?
    If yes, what does it say...word for word?

  • I hooked up mine and finally got it to work but every once in a while my web browser get stuck.  how di fix this?

    i hooked up mine airport and finally got it to work but every once in a while my web browser gets stuck.  how di fi?

    Wow that was really quick, thank you so much.  Im not sure at all which version it was because i said it was around 4 years ago he bought it.  I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names.  isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
    So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
    either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
    sarucia

  • Smbclient works but mount fails in Finder and Terminal (VPN) - why?

    I have a Windows(2003SP2) file server within some LAN with IP 192.168.10.10 and with shared folder structure like
    /Sity/District/
    I am authorised to connect to this LAN over VPN (it works) and to connect to /Sity, but I am authorized only to see and modify files within /District folder.
    With the command
    'smbclient -U username //192.168.10.10/Sity'
    in Terminal I can connect to the server and e.g. cd to District or get all the files from /Sity/District/. However, neither mount_smbfs in Terminal nor Connect to Server in Finder can mount the share - error is
    mount_smbfs: negotiate phase failed: syserr = Connection refused,
    I also tried different options for mount_smbfs like '-I' with no result.
    Finder 'Connect to server' complain about the username and the password.
    'could not connect to the server because the name or password is not correct'
    The /etc/nsmb.conf has the following structure
    [default]
    minauth=none
    Is there a way to mount such share?

    'VPN for pizza money' - it would be great, but I am afraid the /City/District is administrated on / level, which be a Country in this terminology.
    'Ask him to look at your settings' - When I asked what settings should be he sent me the screen shots of his settings. So in fact I know as much as he does. He uses Windows, and Win2Win mount works on the LAN. NOTE AGAIN - smbclient works when I connet via VPN, so I have no rights to complain to the admin. Could it be that ether Finder or OS X does not understand that the only thing I can do with /City folder is to 'cd District'?
    'mac's IP address...192.168.1...something' - yes, when connected via VPN I can either get automatically 192.168.100.something IP or select manually (works too, I took 192.168.200.something).
    'SystemPreferences>Network. Click on the dot-in-the-list labeled VPN' - yes, ther is place for DNS. It works fine. I just think it is Network panel, network interface properties. Other network interfaces are Ethernet and AirPort, also with DNS settings on there own. No place for configurations in Internet Connect - VPN(PPTP) - Edit Configurations ...
    'SMB/CIFS configuration in your mac's DirectoryAccess' - settings are correct - WORKGROUP and blank for WINS. It asked me for the WORKGROUP/User/Password on first attempt to mount smb from Finder 'Connect to Server'. However, it never asked again.

  • Authentication with App Service Gateway worked, but now fails

    So I was trying to authenticate my app with the App Service gateway so that I can access my locked down Api App. I have set up identity providers for both Google and Microsoft, and all was working wonderfully. I was making some tweaks with how I was handling
    the authentication token, so I was hitting the authentication code 3-4 time a minute. Everything was great until suddenly the web page stopped opening up.
    I did some digging and it seems that the gateway simply cannot handle my requests anymore. I am now getting 500 responses and the streaming logs for the gateway host web app spat out an IIS error page that I've pasted at the end here... To me the
    error looks like it's coming from the gateway code. So what is going on? I've tried restarting both the gateway and the host for the gateway, I've tried changing the pricing tier to a non-shared plan in case something on the machine was crashing, and
    I've tried accessing the /signin-google page on both my mobile app and desktop browser (both fail with 500). I assume that recreating the entire resource group and associated gateway would solve the problem, but I don't know that this won't happen again. So
    any tips you have would be appreciated, thanks.
    IIS Error page:
    HTTP Error 500.0 - Internal Server Error
    The page cannot be displayed because an internal server error has occurred.
    Most likely causes:
    IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.
    IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.
    IIS was not able to process configuration for the Web site or application.
    The authenticated user does not have permission to use this DLL.
    The request is mapped to a managed handler but the .NET Extensibility Feature is not installed.
    Things you can try:
    Ensure that the NTFS permissions for the web.config file are correct and allow access to the Web server's machine account.
    Check the event logs to see if any additional information was logged.
    Verify the permissions for the DLL.
    Install the .NET Extensibility feature if the request is mapped to a managed handler.
    Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click
    here.
    Detailed Error Information:
    Module
       __DynamicModule_Microsoft.Owin.Host.SystemWeb.OwinHttpModule, Microsoft.Owin.Host.SystemWeb, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35_63ffbacd-0ee6-4727-806c-1c01b9b82249
    Notification
       MapRequestHandler
    Handler
       ExtensionlessUrlHandler-Integrated-4.0
    Error Code
       0x00000000
    Requested URL
       https://chipexchangeresources8ff2d21b21f84262ae5c1b3af4dc04ca:80/signin-microsoft
    Physical Path
       D:\Program Files (x86)\SiteExtensions\ApiAppsGateway\0.9.29\signin-microsoft
    Logon Method
       Anonymous
    Logon User
       Anonymous
    More Information:
    This error means that there was a problem while processing the request. The request was received by the Web server, but during processing a fatal error occurred, causing the 500 error.
    View more information »
    Microsoft Knowledge Base Articles:

    No, it wasn't anything to do with Insights. Actually coming back after a weekend cleared my mind enough for me to spot my foolish error. It turns out I had accidentally switched the login and redirect urls,
    From
    Login: <gatewayurl>/login/google
    Redirect: <gatewayurl>/signin-google
    To
    Login: <gatewayurl>/signin-google
    Redirect: <gatewayurl>/login/google
    I just didn't notice at the time because /signin-google looks like a signin url rather than a redirect one. As soon as I switched back to using the /login/google one everything is back to working smoothly. Sorry for the false alarm, but as a side note I
    don't think the gateway should be throwing an exception if there is no auth token.

  • VPN connection works, but can't ping or access any other device on remote network

    I have an OS X Lion server at work (uses a static IP of 192.168.2.10). VPN is setup and works.
    The work network's router has an IP of 192.168.2.1 and hands out IPs of 192.168.2.100-149. The VPN service is configured to hand out IPs of 192.168.2.150-170.
    My home network uses a router with an IP of 192.168.1.1 and hands out IPs from 192.168.1.2-49
    Both routers are using subnet mask of 255.255.255.0
    The problem is, I can connect to the VPN just fine and access all services running on that same OS X server like iChat and AFP file sharing. But, I cannot directly access any other device on the office network like client machines or even trying to log into the router's GUI interface. Pings timeout, etc.
    Example:
    At my home, I have a local IP of 192.168.1.12 and I connect to the work VPN. It assigns me an IP address of 192.168.2.151 and I'm able to connect to iChat on the OS X server that has a static IP of 192.168.2.10
    In terminal, I try to ping the router on the work network (192.168.2.1) and I get no response (even though ICMP response is turn ON). I try to ping another OS X workstation on the work office, and get no response.
    I'm not sure how to fix this, or whether I need to change settings on either router or the server.
    Would greatly appreciate any insight or help on this. Thanks.

    danimalapple wrote:
    I have an OS X Lion server at work (uses a static IP of 192.168.2.10). VPN is setup and works.
    The work network's router has an IP of 192.168.2.1 and hands out IPs of 192.168.2.100-149. The VPN service is configured to hand out IPs of 192.168.2.150-170.
    My home network uses a router with an IP of 192.168.1.1 and hands out IPs from 192.168.1.2-49
    Both routers are using subnet mask of 255.255.255.0
    The problem is, I can connect to the VPN just fine and access all services running on that same OS X server like iChat and AFP file sharing. But, I cannot directly access any other device on the office network like client machines or even trying to log into the router's GUI interface. Pings timeout, etc.
    Example:
    At my home, I have a local IP of 192.168.1.12 and I connect to the work VPN. It assigns me an IP address of 192.168.2.151 and I'm able to connect to iChat on the OS X server that has a static IP of 192.168.2.10
    In terminal, I try to ping the router on the work network (192.168.2.1) and I get no response (even though ICMP response is turn ON). I try to ping another OS X workstation on the work office, and get no response.
    I'm not sure how to fix this, or whether I need to change settings on either router or the server.
    Would greatly appreciate any insight or help on this. Thanks.
    Check the DNS settings on the server (see my earlier post in this thread).

  • DB link working but tnsping fails,how?

    Hi
    I have DB link defined in Oracle EBS DB 10.2.0.3. When i query the table using db link, it is working. But tnsping is failing with this error --TNS-12535: TNS:operation timed out. When the network is not established between our oracle server and SQL server database, how come the DB links works?
    Any help highly appreciated.
    Regards

    Hi
    We have 3 different servers for the DB links. When i was querying with one of our data center server (network ok), it is ok. But the other two servers it is failing. Sorry, mistaken.
    Regards

  • Smbclient works but mount_smbfs fails

    I am running across a rather strange issue with a Zonet NAS I recently purchased.  The device shares files via FTP and SMB over the network.  I have an iMac running Lion and a Macbook Pro running Snow Leopard.  I can connect just fine from the iMac but not from the Macbook Pro using the Go -> Connect to Server menu in Finder.
    From the Macbook I always receive an authentication error regardless of the account I use.  From the iMac the exact same parameters work fine.
    I tried some commandline utilities from the Macbook Pro.  smbclient works fine.  So the command:
    smbclient //10.0.0.50/photoshare -U alext
    works fine, it prompts me for the password and gives me a command line session where I can transfer files.
    However the command:
    mount_smbfs //[email protected]/photoshare /Volumes/photoshare
    always returns the error:
    mount_smbfs: server rejected the connection: Authentication error
    This is very puzzling.  There must be something strange with my SMB client on the Macbook but I have no idea what is going on.  Any ideas would be appreciated.

    'VPN for pizza money' - it would be great, but I am afraid the /City/District is administrated on / level, which be a Country in this terminology.
    'Ask him to look at your settings' - When I asked what settings should be he sent me the screen shots of his settings. So in fact I know as much as he does. He uses Windows, and Win2Win mount works on the LAN. NOTE AGAIN - smbclient works when I connet via VPN, so I have no rights to complain to the admin. Could it be that ether Finder or OS X does not understand that the only thing I can do with /City folder is to 'cd District'?
    'mac's IP address...192.168.1...something' - yes, when connected via VPN I can either get automatically 192.168.100.something IP or select manually (works too, I took 192.168.200.something).
    'SystemPreferences>Network. Click on the dot-in-the-list labeled VPN' - yes, ther is place for DNS. It works fine. I just think it is Network panel, network interface properties. Other network interfaces are Ethernet and AirPort, also with DNS settings on there own. No place for configurations in Internet Connect - VPN(PPTP) - Edit Configurations ...
    'SMB/CIFS configuration in your mac's DirectoryAccess' - settings are correct - WORKGROUP and blank for WINS. It asked me for the WORKGROUP/User/Password on first attempt to mount smb from Finder 'Connect to Server'. However, it never asked again.

  • SocketConnection works, but HttpConnection fails?

    I have a MIDlet that connects to a website (via HttpConnection), retrieves an IP adress from a text file, and then connects to that IP adress via a SocketConnection.
    On the emulator everything works fine. The problem occurs when I test the MIDlet on my Motorola v3x.
    If I don't retrieve the IP from a HTTP location, but just hardcode it, everything works fine. The socket is established and the application works perfectly. However, when I do try to retrieve the text file, the execution gets stuck on httpconnection.openInputStream() .
    I tried to connect to the website via a socket on port 80, but it seems that this access method is restricted.
    Here is the code:
    public boolean connect (){
            try{
                String resp = "", ip, req;
                byte [] buf = new byte [1024];
                HttpConnection tmp;
                InputStream in;
                try{
                    //Connect to a website and retrieve the IP of the server
                    tmp = (HttpConnection)Connector.open("http://my-website.com/addr.txt");
                    in = tmp.openInputStream();  //GETS STUCK HERE
                    try{
                        while (in.read(buf,0,1023)>0){
                            resp += new String (buf);
                    }catch (Exception e){
                        //Connection closed?
                    in.close();
                    tmp.close();
                    if (resp.length() < 20){ //A good response has to be larger than that...
                        return false;
                    ip = resp.substring(resp.indexOf("<ip>")+4, resp.indexOf("</ip>")); //XML-like
                    if (ip.length()<8){
                        return false;
                }catch (Exception e){
                    return false; //Connection failed
                //sock, sIn, sOut - class members
                sock = (SocketConnection)Connector.open("socket://"+ip+":1333"); //Connect to server on port 1333
                sIn = sock.openInputStream();
                sOut = sock.openOutputStream();
                return true;
            }catch (Exception ex){
                return false; //Connection failed
        }Please help, I'm really lost here.
    P.S.
    The IP adress that I'm trying to retrieve is dynamic, so I can't actually hardcode it in to the application. I must get it from the web site.

    - Some operators use HTTP accelerators in their networks, and the application doesn't cope with those response codes. The HTTP accelerator intercepts all external HTTP requests and immediately responds with a Redirect response (Code 3xx). If the application regards any response code other than 200 OK as an error, then the application fails in this case. Developers needs to handle redirect response codes in their application.
    - Some other manufacturer implementations enable a "piggy back" approach to HTTP through a WAP connection rather than a pure HTTP connection. Some Motorola handsets may require you to use a pure HTTP connection and may not support HTTP over WAP. This is why HTTP may work on other devices but not some Motorola devices - in this instance often an IOException will be returned as the error condition.
    - The carrier must have a GPRS APN that allows HTTP traffic to connect through their network in order for the connection to be sucessful.
    Confirm from the service provider
    - Is the GPRS APN open for pure HTTP Protocol communication not just WAP?
    Check on the Motorola Device :
    - Do you have a menu item on the device that is called "Web Session"? Some carriers disable this feature. If enabled this will allow you to specify more than one web connectivity session.
    - If the "Web Session" menu item is present, do you have details of the HTTP APN from your carrier? If yes then please create a new Web Session called "Java Session" [case sensitive] as per the details available from carrier. Retry the MIDlet with this Web Session profile set.
    If the Web Session menu item is not present and the carrier states that pure HTTP protocol connectivity through their GPRS TCP/IP network is disabled then the problems will occur with connectivtiy.
    HttpConnection in motorola doesnt return -1 if the Stream size is unknown..
    try {
    c = (StreamConnection)Connector.open(url);
    if (c instanceof HttpConnection) {
    // open it nicely
    HttpConnection http = (HttpConnection)c;
    // cast it to get at the extra methods
    if (http.getResponseCode() != HttpConnection.HTTP_OK) {
    // err ...
    } else {
    int len = (int) http.getLength();
    s = c.openInputStream();
    if (len == -1) {
    // unknown length?
    // read until .read() returns -1
    int ch;
    while((ch = s.read()) ! = -1) {
    b.append((char) ch);
    } else {
    // known length
    for (int i=0; i <len; i++)="i++)" {
    b.append((char) s.read());
    } else {
    s = c.openInputStream();
    int ch;
    while((ch = s.read()) != -1)
    b.append((char) ch);
    myBuffer.insert(b.toString(), 0);
    } finally.....

  • Full load works, but delta fails - "Error in the Extractor"

    Good morning,
    We are using datasource 3FI_SL_ZZ_SI (Special Ledger line items) to load a cube, and are having trouble with the delta loads.  If I run a full load, everything runs fine.  If I run a delta load, it will initially fail with an error that simply states "Error in the Extractor" (no long text).  If I repeat the delta load, it completes successfully with 0 records returned.  If I then rerun the delta, I get the error again.
    I've run extractions using RSA3, but they work fine - as I would expect since the full loads work.  Unfortunately, I have not been able to find why the deltas aren't working.  After searching the Forums, I've tried replicating the datasource, checked the job log in R/3 (nothing), and run the program RS_TRANSTRU_ACTIVATE_ALL, all to no avail.
    Any ideas?
    Thanks
    We're running BW 3.5, R/3 4.71

    And it's just that easy....
    Yes, it appears this is what the problem was.  I'd been running the delta init without data transfer, and it was failing during the first true delta run.  Once I changed the delta init so that it transferred data, the deltas worked fine.  This was in our development system.  I took a look in our production system where deltas have been running for quite some time, and it turns out the delta initialization there was done with data transfer. 
    Thank you very much!

  • Directly printing works - but viewer fails with an error

    Hey,
    we are using: Crystal Reports 2011 and runtime for VS2010.
    I open and print my reports via c#. The directly printing works fine. But the viewer don't works. It's really crazy, because directly printing and viewing are using the same methods for database login etc.
    At preview a form with the crystalreportsviewer will be opened and the reportsource is being set. After that the viewer shows the progress box. After a short while the progress box disappears and the following error is shown:
    Crystal Report Windows Forms Viewer
    Die Abfragen zum Abrufen der für diesen Bericht erforderlichen Daten können nicht ermittelt werden.
    Daten konnten nicht aus Datenbank abgerufen werden.
    Fehler in der Datei CS_201001_u {5BF5FF1B-C662-4A1E-80CA-B4BEB0124295}.rpt:
    Daten konnten nicht aus Datenbank abgerufen werden.
    OK  
    Translated in english:
    Crystal Report Windows Forms Viewer
    The queries to retrieve the required data for this report can not be determined.
    Fehler in der Datei CS_201001_u {5BF5FF1B-C662-4A1E-80CA-B4BEB0124295}.rpt:
    Data could not be retrieved from database.
    OK  
    But the database logon methods etc. are all the same as at directly printing. What could it be?
                this.crystalReportViewer.ShowPrintButton = false;
                this.crystalReportViewer.ReportSource = pMainCRWReport;
                this.crystalReportViewer.ShowProgressAnimation(this._DruckOptionen.ShowDruckstatus);
                if (pPreviewOptions.Zoomlevel == 1 || pPreviewOptions.Zoomlevel == 2 ||
                    (pPreviewOptions.Zoomlevel >= 25 && pPreviewOptions.Zoomlevel <= 400))
                    this.crystalReportViewer.Zoom(pPreviewOptions.Zoomlevel);
                                pMainCRWReport.PrintToPrinter(pReport.Druckoptionen.AnzahlKopien,
                                                              pReport.Druckoptionen.KopieSeitenSortiert,
                                                              pReport.Druckoptionen.StartPage,
                                                              pReport.Druckoptionen.EndPage);
    pMainCRWReport is ReportDocument.

    Yes, it looks like that. I don't use postbacks or sessions.
    I have inserted the following code just before the ReportSource of the viewer will be set.
    ReportDocument doc = (ReportDocument)pMainCRWReport;
    foreach (Table table in doc.Database.Tables)
           MessageBox.Show(string.Format("{0}: {1}", table.Name, table.TestConnectivity().ToString()));
    All TestConnectivity returning true!
    CrystalDecisions.CrystalReports.Engine.InternalException: Daten konnten nicht aus Datenbank abgerufen werden.
    Details:  Datenbankanbietercode: -243
    Daten konnten nicht aus Datenbank abgerufen werden.
    Fehler in der Datei CS_201001_u {870C483C-D947-4FEA-A1C6-1AD0DC4A2805}.rpt:
    Daten konnten nicht aus Datenbank abgerufen werden.
    Details:  Datenbankanbietercode: -243 ---> System.Runtime.InteropServices.COMException (0x800002D3): Daten konnten nicht aus Datenbank abgerufen werden.
    Details:  Datenbankanbietercode: -243
    Daten konnten nicht aus Datenbank abgerufen werden.
    Fehler in der Datei CS_201001_u {870C483C-D947-4FEA-A1C6-1AD0DC4A2805}.rpt:
    Daten konnten nicht aus Datenbank abgerufen werden.
    Details:  Datenbankanbietercode: -243
       bei CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetPage(PageRequestContext pPageRequestContext)
       bei CrystalDecisions.ReportSource.EromReportSourceBase.GetPage(PageRequestContext pageReqContext)
       --- Ende der internen Ausnahmestapelüberwachung ---
       bei CrystalDecisions.Windows.Forms.ReportDocumentBase.GetPage(Int32 pageN)
       bei CrystalDecisions.Windows.Forms.DocumentControl.ShowNthPage(Int32 PageNumber)
       bei CrystalDecisions.Windows.Forms.DocumentControl.ShowFirstPage()
       bei CrystalDecisions.Windows.Forms.PageView.ShowFirstPageEx()/
    OK  
    The error -243 is an informix error:
    Could not position within a table table-name.
    The database server cannot set the file position to a particular row within the file that represents a table. Check the accompanying ISAM error code for more information. A hardware error might have occurred, or the table or index might have been corrupted (truncated). Unless the ISAM error code or an operating-system message points to another cause, run the oncheck utility (secheck with IBM Informix SE or tbcheck with IBM Informix OnLine) to check and repair table and index.
    It seems to be that the viewer can't read the records with are locked within a transaction. I don't understand why the direct printing works. Is it possible to set the ISOLATION LEVEL for the report database connections?
    I have tried this note but it don't works.

  • VPN connection works but VPN traffic is blocked

    I have an 881w in a central site which remote users VPN into with desktop client then initiate RDP connection to machines at central site. I configured this mostly with the Easy VPN tool since I am a complete novice with Cisco equipment. We just upgraded to this from Linksys running DD-WRT since we were running the CPU on it at 100%.
    Details
    Remote clients can ping the gateway but nothing else and can't RDP to machines.
    Clients cannot be pinged from central site. 
    Configuration Professional shows active connections. 
    The network at the central site is 192.168.10.0/24.
    The network at the remote sites is unknown, but it is not the same as the central site. 
    Can someone help me figure out what I'm doing wrong?
    Thank you for looking. The config is posted below.
    version 15.0
    no service pad
    service tcp-keepalives-in
    service tcp-keepalives-out
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    service sequence-numbers
    hostname 881w01
    boot-start-marker
    boot-end-marker
    security authentication failure rate 3 log
    security passwords min-length 6
    logging buffered 51200
    logging console critical
    enable secret 5 $1$j49H$gGfj5TWFFbg/fc0sAc1rN/
    aaa new-model
    aaa authentication login default local
    aaa authentication login ciscocp_vpn_xauth_ml_1 local
    aaa authentication login ciscocp_vpn_xauth_ml_2 local
    aaa authorization exec default local
    aaa authorization network ciscocp_vpn_group_ml_1 local
    aaa authorization network ciscocp_vpn_group_ml_2 local
    aaa session-id common
    memory-size iomem 10
    clock timezone PCTime -6
    clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00
    crypto pki trustpoint TP-self-signed-2923777556
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-2923777556
    revocation-check none
    rsakeypair TP-self-signed-2923777556
    crypto pki certificate chain TP-self-signed-2923777556
    certificate self-signed 01
    EDITED OUT
          quit
    no ip source-route
    ip dhcp excluded-address 192.168.10.1 192.168.10.200
    ip dhcp excluded-address 192.168.10.251 192.168.10.254
    ip dhcp pool ccp-pool1
       import all
       network 192.168.10.0 255.255.255.0
       dns-server 208.67.222.222 208.67.220.220
       default-router 192.168.10.2
       domain-name EDITED OUT
    ip cef
    no ip bootp server
    ip domain name EDITED OUT
    ip name-server 208.67.222.222
    ip name-server 208.67.220.220
    ip ddns update method ccp_ddns1
    HTTP
      add http://EDITED [email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
      remove http://EDITED [email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
    no ipv6 cef
    license udi pid CISCO881W-GN-A-K9 sn FTX162683LX
    username EDITED OUT privilege 15 secret 5 $1$BK.5$K7ODMYoskU8zBrozUoXj..
    username EDITED OUT secret 5 $1$pG2b$aAEaz1JagmxNQHmqTMEBe0
    username EDITED OUT secret 5 $1$ySKe$rqvLbt.LeSu83HKmCdaSN1
    username EDITED OUT secret 5 $1$btT6$P24XxPBSQRrGD4BtvYJbo0
    ip tcp synwait-time 10
    ip ssh time-out 60
    ip ssh authentication-retries 2
    class-map type inspect match-any SDM_BOOTPC
    match access-group name SDM_BOOTPC
    class-map type inspect match-any SDM_DHCP_CLIENT_PT
    match class-map SDM_BOOTPC
    class-map type inspect match-any SDM_AH
    match access-group name SDM_AH
    class-map type inspect match-any sdm-cls-bootps
    match protocol bootps
    class-map type inspect match-any ccp-cls-insp-traffic
    match protocol cuseeme
    match protocol dns
    match protocol ftp
    match protocol h323
    match protocol https
    match protocol icmp
    match protocol imap
    match protocol pop3
    match protocol netshow
    match protocol shell
    match protocol realmedia
    match protocol rtsp
    match protocol smtp
    match protocol sql-net
    match protocol streamworks
    match protocol tftp
    match protocol vdolive
    match protocol tcp
    match protocol udp
    class-map type inspect match-all ccp-insp-traffic
    match class-map ccp-cls-insp-traffic
    class-map type inspect match-any SDM_IP
    match access-group name SDM_IP
    class-map type inspect match-any SDM_ESP
    match access-group name SDM_ESP
    class-map type inspect match-any SDM_EASY_VPN_SERVER_TRAFFIC
    match protocol isakmp
    match protocol ipsec-msft
    match class-map SDM_AH
    match class-map SDM_ESP
    class-map type inspect match-all SDM_EASY_VPN_SERVER_PT
    match class-map SDM_EASY_VPN_SERVER_TRAFFIC
    class-map type inspect match-any ccp-cls-icmp-access
    match protocol icmp
    match protocol tcp
    match protocol udp
    class-map type inspect match-all ccp-icmp-access
    match class-map ccp-cls-icmp-access
    class-map type inspect match-all ccp-invalid-src
    match access-group 100
    class-map type inspect match-all ccp-protocol-http
    match protocol http
    policy-map type inspect ccp-permit-icmpreply
    class type inspect sdm-cls-bootps
      pass
    class type inspect ccp-icmp-access
      inspect
    class class-default
      pass
    policy-map type inspect ccp-inspect
    class type inspect ccp-invalid-src
      drop log
    class type inspect ccp-protocol-http
      inspect
    class type inspect ccp-insp-traffic
      inspect
    class class-default
      drop
    policy-map type inspect ccp-permit
    class type inspect SDM_EASY_VPN_SERVER_PT
      pass
    class type inspect SDM_DHCP_CLIENT_PT
      pass
    class class-default
      drop
    policy-map type inspect sdm-permit-ip
    class type inspect SDM_IP
      pass
    class class-default
      drop log
    zone security out-zone
    zone security in-zone
    zone security ezvpn-zone
    zone-pair security ccp-zp-self-out source self destination out-zone
    service-policy type inspect ccp-permit-icmpreply
    zone-pair security ccp-zp-in-out source in-zone destination out-zone
    service-policy type inspect ccp-inspect
    zone-pair security ccp-zp-out-self source out-zone destination self
    service-policy type inspect ccp-permit
    zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone
    service-policy type inspect sdm-permit-ip
    zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone
    service-policy type inspect sdm-permit-ip
    zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone
    service-policy type inspect sdm-permit-ip
    zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone
    service-policy type inspect sdm-permit-ip
    crypto isakmp policy 1
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp client configuration group EDITED OUT
    key EDITED OUT
    dns 208.67.222.222 208.67.220.220
    domain accnet.com
    pool SDM_POOL_2
    acl 102
    save-password
    max-logins 5
    crypto isakmp profile ciscocp-ike-profile-1
       match identity group EZVPNGroup
       client authentication list ciscocp_vpn_xauth_ml_2
       isakmp authorization list ciscocp_vpn_group_ml_2
       client configuration address respond
       virtual-template 1
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac
    crypto ipsec profile CiscoCP_Profile1
    set transform-set ESP-3DES-SHA1
    set isakmp-profile ciscocp-ike-profile-1
    interface FastEthernet0
    interface FastEthernet1
    interface FastEthernet2
    interface FastEthernet3
    interface FastEthernet4
    description WAN link$FW_OUTSIDE$$ES_WAN$$ETH-WAN$
    ip address dhcp client-id FastEthernet4
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat outside
    ip virtual-reassembly
    zone-member security out-zone
    duplex auto
    speed auto
    interface Virtual-Template1 type tunnel
    description VPN virtual interface
    ip unnumbered FastEthernet4
    tunnel mode ipsec ipv4
    tunnel protection ipsec profile CiscoCP_Profile1
    interface wlan-ap0
    description Service module interface to manage the embedded AP
    ip unnumbered Vlan1
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    arp timeout 0
    interface Wlan-GigabitEthernet0
    description Internal switch interface connecting to the embedded AP
    switchport mode trunk
    interface Vlan1
    description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$
    ip address 192.168.10.2 255.255.255.0
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat inside
    ip virtual-reassembly
    zone-member security in-zone
    ip tcp adjust-mss 1452
    ip local pool SDM_POOL_1 30.30.30.10 30.30.30.30
    ip local pool SDM_POOL_2 192.168.10.10 192.168.10.29
    ip forward-protocol nd
    ip http server
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip nat inside source list 1 interface FastEthernet4 overload
    ip access-list extended SDM_AH
    remark CCP_ACL Category=1
    permit ahp any any
    ip access-list extended SDM_BOOTPC
    remark CCP_ACL Category=0
    permit udp any any eq bootpc
    ip access-list extended SDM_ESP
    remark CCP_ACL Category=1
    permit esp any any
    ip access-list extended SDM_IP
    remark CCP_ACL Category=1
    permit ip any any
    logging trap debugging
    access-list 1 remark INSIDE_IF=Vlan1
    access-list 1 remark CCP_ACL Category=2
    access-list 1 permit 192.168.10.0 0.0.0.255
    access-list 100 remark CCP_ACL Category=128
    access-list 100 permit ip host 255.255.255.255 any
    access-list 100 permit ip 127.0.0.0 0.255.255.255 any
    access-list 101 remark CCP_ACL Category=4
    access-list 101 permit ip 192.168.10.0 0.0.0.255 any
    access-list 102 remark CCP_ACL Category=4
    access-list 102 permit ip 192.168.10.0 0.0.0.255 any
    no cdp run
    control-plane
    banner exec ^C
    % Password expiration warning.
    Cisco Configuration Professional (Cisco CP) is installed on this device
    and it provides the default username "cisco" for  one-time use. If you have
    already used the username "cisco" to login to the router and your IOS image
    supports the "one-time" user option, then this username has already expired.
    You will not be able to login to the router with this username after you exit
    this session.
    It is strongly suggested that you create a new username with a privilege level
    of 15 using the following command.
    username <myuser> privilege 15 secret 0 <mypassword>
    Replace <myuser> and <mypassword> with the username and password you
    want to use.
    ^C
    banner login ^CAuthorized access only!
    Disconnect IMMEDIATELY if you are not an authorized user!^C
    line con 0
    no modem enable
    transport output telnet
    line aux 0
    transport output telnet
    line 2
    no activation-character
    no exec
    transport preferred none
    transport input all
    line vty 0 4
    transport input telnet ssh
    scheduler max-task-time 5000
    scheduler allocate 4000 1000
    scheduler interval 500

    Thank you for the respnse Jennifer. I have made the suggested changes, but no change in behavior on either end.
    Does anything else stand out as a potential problem? The current running-config is below:
    I'll take a stab at what I think the problem could be, but this is an uneducated guess.
    I think I need acl 150 instead of acl 102 under
    "crypto isakmp client configuration group EZVPNGroup"
    I also think I can get rid of SDM_POOL_1 since it appears to not be used, but I don't think this is actually causing any issue.
    Building configuration...
    Current configuration : 11362 bytes
    ! Last configuration change at 09:07:22 PCTime Sun Aug 5 2012 by 881wmin
    version 15.0
    no service pad
    service tcp-keepalives-in
    service tcp-keepalives-out
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    service sequence-numbers
    hostname 881w01
    boot-start-marker
    boot-end-marker
    security authentication failure rate 3 log
    security passwords min-length 6
    logging buffered 51200
    logging console critical
    enable secret 5 EDITED
    aaa new-model
    aaa authentication login default local
    aaa authentication login ciscocp_vpn_xauth_ml_1 local
    aaa authentication login ciscocp_vpn_xauth_ml_2 local
    aaa authorization exec default local
    aaa authorization network ciscocp_vpn_group_ml_1 local
    aaa authorization network ciscocp_vpn_group_ml_2 local
    aaa session-id common
    memory-size iomem 10
    clock timezone PCTime -6
    clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00
    crypto pki trustpoint TP-self-signed-EDITED
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-EDITED
    revocation-check none
    rsakeypair TP-self-signed-EDITED
    crypto pki certificate chain TP-self-signed-EDITED
    certificate self-signed 01
      EDITED
          quit
    no ip source-route
    ip dhcp excluded-address 192.168.10.1 192.168.10.200
    ip dhcp excluded-address 192.168.10.251 192.168.10.254
    ip dhcp pool ccp-pool1
       import all
       network 192.168.10.0 255.255.255.0
       dns-server 208.67.222.222 208.67.220.220
       default-router 192.168.10.2
       domain-name EDITED
    ip cef
    no ip bootp server
    ip domain name EDITED
    ip name-server 208.67.222.222
    ip name-server 208.67.220.220
    ip ddns update method ccp_ddns1
    HTTP
      add http:/[email protected]/nic/update?system=dyndns&hostname=&myip=
      remove http://[email protected]/nic/update?system=dyndns&hostname=&myip=
    no ipv6 cef
    license udi pid CISCO881W-GN-A-K9 sn FTX162683LX
    username EDITED
    ip tcp synwait-time 10
    ip ssh time-out 60
    ip ssh authentication-retries 2
    class-map type inspect match-any SDM_BOOTPC
    match access-group name SDM_BOOTPC
    class-map type inspect match-any SDM_DHCP_CLIENT_PT
    match class-map SDM_BOOTPC
    class-map type inspect match-any SDM_AH
    match access-group name SDM_AH
    class-map type inspect match-any sdm-cls-bootps
    match protocol bootps
    class-map type inspect match-any ccp-cls-insp-traffic
    match protocol cuseeme
    match protocol dns
    match protocol ftp
    match protocol h323
    match protocol https
    match protocol icmp
    match protocol imap
    match protocol pop3
    match protocol netshow
    match protocol shell
    match protocol realmedia
    match protocol rtsp
    match protocol smtp
    match protocol sql-net
    match protocol streamworks
    match protocol tftp
    match protocol vdolive
    match protocol tcp
    match protocol udp
    class-map type inspect match-all ccp-insp-traffic
    match class-map ccp-cls-insp-traffic
    class-map type inspect match-any SDM_IP
    match access-group name SDM_IP
    class-map type inspect match-any SDM_ESP
    match access-group name SDM_ESP
    class-map type inspect match-any SDM_EASY_VPN_SERVER_TRAFFIC
    match protocol isakmp
    match protocol ipsec-msft
    match class-map SDM_AH
    match class-map SDM_ESP
    class-map type inspect match-all SDM_EASY_VPN_SERVER_PT
    match class-map SDM_EASY_VPN_SERVER_TRAFFIC
    class-map type inspect match-any ccp-cls-icmp-access
    match protocol icmp
    match protocol tcp
    match protocol udp
    class-map type inspect match-all ccp-icmp-access
    match class-map ccp-cls-icmp-access
    class-map type inspect match-all ccp-invalid-src
    match access-group 100
    class-map type inspect match-all ccp-protocol-http
    match protocol http
    policy-map type inspect ccp-permit-icmpreply
    class type inspect sdm-cls-bootps
      pass
    class type inspect ccp-icmp-access
      inspect
    class class-default
      pass
    policy-map type inspect ccp-inspect
    class type inspect ccp-invalid-src
      drop log
    class type inspect ccp-protocol-http
      inspect
    class type inspect ccp-insp-traffic
      inspect
    class class-default
      drop
    policy-map type inspect ccp-permit
    class type inspect SDM_EASY_VPN_SERVER_PT
      pass
    class type inspect SDM_DHCP_CLIENT_PT
      pass
    class class-default
      drop
    policy-map type inspect sdm-permit-ip
    class type inspect SDM_IP
      pass
    class class-default
      drop log
    zone security out-zone
    zone security in-zone
    zone security ezvpn-zone
    zone-pair security ccp-zp-self-out source self destination out-zone
    service-policy type inspect ccp-permit-icmpreply
    zone-pair security ccp-zp-in-out source in-zone destination out-zone
    service-policy type inspect ccp-inspect
    zone-pair security ccp-zp-out-self source out-zone destination self
    service-policy type inspect ccp-permit
    zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone
    service-policy type inspect sdm-permit-ip
    zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone
    service-policy type inspect sdm-permit-ip
    zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone
    service-policy type inspect sdm-permit-ip
    zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone
    service-policy type inspect sdm-permit-ip
    crypto isakmp policy 1
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp client configuration group EZVPNGroup
    key EDITED
    dns 208.67.222.222 208.67.220.220
    domain EDITED
    pool SDM_POOL_2
    acl 102
    save-password
    max-users 20
    max-logins 5
    crypto isakmp profile ciscocp-ike-profile-1
       match identity group EZVPNGroup
       client authentication list ciscocp_vpn_xauth_ml_2
       isakmp authorization list ciscocp_vpn_group_ml_2
       client configuration address respond
       virtual-template 1
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac
    crypto ipsec profile CiscoCP_Profile1
    set transform-set ESP-3DES-SHA1
    set isakmp-profile ciscocp-ike-profile-1
    interface FastEthernet0
    interface FastEthernet1
    interface FastEthernet2
    interface FastEthernet3
    interface FastEthernet4
    description WAN link$FW_OUTSIDE$$ES_WAN$$ETH-WAN$
    ip address dhcp client-id FastEthernet4
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat outside
    ip virtual-reassembly
    zone-member security out-zone
    duplex auto
    speed auto
    interface Virtual-Template1 type tunnel
    description VPN virtual interface
    ip unnumbered FastEthernet4
    tunnel mode ipsec ipv4
    tunnel protection ipsec profile CiscoCP_Profile1
    interface wlan-ap0
    description Service module interface to manage the embedded AP
    ip unnumbered Vlan1
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    arp timeout 0
    interface Wlan-GigabitEthernet0
    description Internal switch interface connecting to the embedded AP
    switchport mode trunk
    interface Vlan1
    description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$
    ip address 192.168.10.2 255.255.255.0
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat inside
    ip virtual-reassembly
    zone-member security in-zone
    ip tcp adjust-mss 1452
    ip local pool SDM_POOL_1 30.30.30.10 30.30.30.30
    ip local pool SDM_POOL_2 192.168.80.10 192.168.80.29
    ip forward-protocol nd
    ip http server
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip nat inside source list 150 interface FastEthernet4 overload
    ip access-list extended SDM_AH
    remark CCP_ACL Category=1
    permit ahp any any
    ip access-list extended SDM_BOOTPC
    remark CCP_ACL Category=0
    permit udp any any eq bootpc
    ip access-list extended SDM_ESP
    remark CCP_ACL Category=1
    permit esp any any
    ip access-list extended SDM_IP
    remark CCP_ACL Category=1
    permit ip any any
    logging trap debugging
    access-list 1 remark INSIDE_IF=Vlan1
    access-list 1 remark CCP_ACL Category=2
    access-list 1 permit 192.168.10.0 0.0.0.255
    access-list 100 remark CCP_ACL Category=128
    access-list 100 permit ip host 255.255.255.255 any
    access-list 100 permit ip 127.0.0.0 0.255.255.255 any
    access-list 101 remark CCP_ACL Category=4
    access-list 101 permit ip 192.168.10.0 0.0.0.255 any
    access-list 102 remark CCP_ACL Category=4
    access-list 102 permit ip 192.168.10.0 0.0.0.255 any
    access-list 150 deny   ip 192.168.10.0 0.0.0.255 192.168.80.0 0.0.0.255
    access-list 150 permit ip 192.168.10.0 0.0.0.255 any
    no cdp run
    control-plane
    banner exec ^C
    % Password expiration warning.
    Cisco Configuration Professional (Cisco CP) is installed on this device
    and it provides the default username "cisco" for  one-time use. If you have
    already used the username "cisco" to login to the router and your IOS image
    supports the "one-time" user option, then this username has already expired.
    You will not be able to login to the router with this username after you exit
    this session.
    It is strongly suggested that you create a new username with a privilege level
    of 15 using the following command.
    username privilege 15 secret 0
    Replace and with the username and password you
    want to use.
    ^C
    banner login ^CAuthorized access only!
    Disconnect IMMEDIATELY if you are not an authorized user!^C
    line con 0
    no modem enable
    transport output telnet
    line aux 0
    transport output telnet
    line 2
    no activation-character
    no exec
    transport preferred none
    transport input all
    line vty 0 4
    transport input telnet ssh
    scheduler max-task-time 5000
    scheduler allocate 4000 1000
    scheduler interval 500
    end

  • AirDrop sometimes works but mostly fails.

    AirDrop under 10.7.2 usually -- but NOT always -- failed, and now under 10.7.3 it has not succeeded even once.  The message is that the Apple ID of the receiver is wrong (but it's not) or that the receiver has failed to respond (but no opportunity to respond has arisen).  How can a plug-and-play feature be such a dud?
         -- Rob

    AirDrop under 10.7.2 usually -- but NOT always -- failed, and now under 10.7.3 it has not succeeded even once.  The message is that the Apple ID of the receiver is wrong (but it's not) or that the receiver has failed to respond (but no opportunity to respond has arisen).  How can a plug-and-play feature be such a dud?
         -- Rob

  • My upgrade to iphone software seemed to work but restore failed (1602)- now phone no longer recognised by itunes and itunes only offers restore to factory settings and warns that this will remove all data- also phone is in restore mode- unusable

    so I did the  itunes upgrade to 10.5.1 and then teh iphone 4 needed to b e upgraded to new ios5.1 - seemed to go all the way through, and the final restore seemed to fail. Now the phone is no longer recognised as personalised, just as iphone. Also  i cannot restore from backup, only restore factory settings and i am warned that I will lose all data. Can I force a restore from back up?  can I guaruntee that I can keep data from backups??

    Same with me. Anyone have an answer??

  • Can't use Quartz on phone, compile works but build fails..what am I missing

    Just simple lines like...
    CGContextRef context = UIGraphicsGetCurrentContext();
    CGContextSetRGBStrokeColor(context, 1.0, 1.0, 1.0, 1.0);
    CGContextSetLineWidth(context, 2.0);
    fail when I try to run it.
    Linking....
    "_CGContextSetLineWidth", referenced from:

    Exactly.
    Just in case you're not sure how to do this.
    Expand "Targets" in Xcode and double click your app name.
    Click the '+' button at the bottom under Linked Libraries and add "QuartzCore.framework"

Maybe you are looking for

  • Field Refkey-3 is required for G/L--error while posting

    Hi All Please suggest for the following. When I do posting to Accounting after Payroll, I get one error....'Field RefKey 3 is a required field for G/L account 1000 107020'. I have to inform FI every month & they in return change some settings for thi

  • No display with loop beeps after changing DRAM Configuration Timing Mode BIOS

    Mainboard - RS480M2 Please anyone help me, after I have override the settings for DRAM Configuration > Timing Mode and set it to manual the system does not display anything and long beeps can be heard, infinite beeps. What should I do? I tried cleari

  • User change log report in Console

    Dear Experts, We have one audit requirement. We need u2018change logu2019 for useru2019s role modification. I checked in console logs. I found the log for delete user & modify user. In case of delete user it is giving details which are the users had

  • Trinidad in 11.1.1.2

    hi, i switched 11gJdev but for IE6 compatibility, i m using trinidad components. how i make a 'tr:commandbutton' to DefaultCommand for a page? page structure is f:view->trh:html->trh:head->trh:body->h:form. for 'InitialFocusId':- by selecting trh:bod

  • Unrejecting clips in iMovie 11

    I rejected certain clips in iMovie.  I then saw an orange line through them so I knew they were in a project.  How do I "unreject" them so they no longer show up in the rejected screen canvas.  I am using iMovie '11 and a MacBook Pro.