Alot of unknown harddrive activity
hi
for the last 2 week i had very much harddrive activity when im using my computer.
it sometimes takes more than 3 minutes to get up a explorer window.
i tried unified driver 2.03 and 2.45 no difference.
im using the same program as i have done for the last 3 months.
i reinstalled xp 3 times the last 2 week.
if i press ctrl alt and delete i can se that explorer.exe sometimes uses up to 371mb memory and all available cpu.
i used avg6 and tried norton av 2004 which found a virus in an avi movie.
also tried an online scan
tried adaware and spybot.
when its reading its impossible to browse internet and kazaa and icq cant connect.
anyone got any idea why its reading so much from the harddrive?
could it be my generic memory that start to malfunction ?
its not a heat problem
bye
hi
it started when i tried to start an episod of charmed was going for a few minutes then stopped.
after i was finished watching the episod i tried to start an mp3 and it started again.
i have more than 20gb avi and mpg movies.
Quote
Avi files (divx) can be trouble in xp. there is a fix to let xp behave much better so it's possible to move or delete large avi files. The obnoxious bug in XP that causes Explorer to read the entire contents of broken AVI files before allowing any access to them is caused by bad behavior of shmedia.dll.
To correct this misbehavior in Windows XP, remove the following
registry key.
HKEY_LOCAL_MACHINESOFTWAREClassesCLSID{87D62D94-71B3-4b9a-9489-5FE6850DC73E}InProcServer32
This will prevent Explorer from loading shmedia.dll in response to file property queries on these files.
when i think of it i have not done it this xp installation yet but i had this problem starting in an installation i had for more than 2 month (almost a record)
i tried diskmon and it says i have 3 partitions on my harddrive.
well im not.
when i think of it.i had a fat32 partition for w98 and removed it with partition magic 8 and resized d:
could that be the problem ?
i still get that vsmon.exe and explorer.exe reads ALOT according to filemon.
the overall speed feels VERY slow.
when i press ctrl alt del and check there is not much cpu usage when its not reading.
i tried 3 times now to get up the "run" window from the start menu.
does not happen anything.
i have not tried safe mode.
Similar Messages
-
Account Unknown on Active Directory
How can I delete Account Unknown on Active Directory? is there a tool or script for deleting 1000 Account Unknown on Active Directory?
Generally, Account Unknown may appear if the system cannot find the account SID which was recorded in ACL of an object in local system or AD database. This issue may occur if user accounts were deleted or the Account Unknown belongs to other system(dual
boot configuration). This is reason that we recommend granting permission on resources to the Domain Local security group instead of individual users. It will be much easier for management and will not generate orphaned SID because user group is stabler.
If you don’t have another system on the same computer or Domain Trust, we can delete the unknown accounts safely.
However, It would be suggested to create a delegation report using the following command before deleting unknown accounts. I will help check them.
for /f "delims=" %x in ('dsquery OU "OU=HR,DC=d1,DC=com"') do acldiag %x > %x.txt
Please refer to this earlier discussed thread that is based on same concern :
http://social.technet.microsoft.com/Forums/windowsserver/en-US/d3d6b211-7c31-4ebc-aff6-489d60fd9910/active-directory-security-permissions-account-unknown?forum=winserverDS
Since, there is a number of unknown accounts that is required to be deleted, you may try this
AD cleaner tool that can be helpful to accomplish this task in quick attempt.
Carlo -
PRoblem with harddrive activity led when two cdroms are plugged in
I am currently having problems with my hard drive led on my k7t266 Pro2-A whenever I have my harddrive, dvd drive, and cd burner connected the hard drive activity led doesn't do anything it just stays constantly on. I have things setup like this: the hard drive WD 80GB Special Edition is master on IDE1, the TDK cd-burner is master on ide2 and the dvd drive is slave on ide2. If I unplug the dvd drive the led wors like it is supposed to, but with it plugged in it just stays on any help would be appreciated.
Athlon XP 2200+
768MB DDR pc2100
WD Special Edition 80gb 8mb cache
TDK 48/16/48
16x dvd
msi geforce4 ti 4400 Championship edition 128mb ram
MSi tv@nywhere
soundblaster audigy gamer
1 linkysys ethernet 10/100
1 3com ethernet 10/100I would try to put both CD drives on one IDE and the HD on IDE #2. Play with the jumpers on the back of the CD drives, make one master and the other slave. I have had good luck with auto detect, but have one DVD player and one burner just compete with each other and both want to be the master.
-
Unknown network activity on iPhone 6
Hello all,
I have found a network "peculiarities" with my iphone 6.
I have a number of devices connected to my Netgear WNDR 4300. I was debugging some weird LAN-activity, and came across that my recently bought iPhone 6 registers 3 network addresses on my router (screenshot attached)
My wifi is only giving out 192.168.1.* addresses, however the iPhone is using a 10.0.0.* address and a high 192.168.*.* address. You can see from the screenshot that the same MAC address is common. When connecting any other device, like the iPad Air 2, this does not happen. Its important to notice that my DHCP-server on the wifi-router does NOT give out 10.0.0.* addresses, on any interface, on any band. Guest network is disabled.
When disconnecting the iPhone 6, the addresses unregister themselves from the DHCP.
Does anyone have any information on this ?
RegardsI have almost the SAME exact situation here. I stumbled across this when looking at the router connections after my wife bought her new iPhone 6. I like to reserve addresses for devices so that we can use the routers restrictions to prevent access during nighttime hours for the young ones. When my wife's phone is connected, we have two devices showing for her phone. One is the phone itself, and one just shows up as a network device. Unique MAC address receiving an IP from the router. I have looked and looked all over the net and on the phone, but can't find the answer. I just found your post today, but see no one has replied with an answer .
Odd thing with us is, that the unknown device is named with my wife's oldest daughters name who is away at college. I know this daughter used my wife's macbook to connect her iphone to itunes several months ago, and it's almost like this has gotten attached to my wife's profile somehow. This never happened until the 6, and I'm geeky enough to not let it go as I HAVE to know what's causing the second connection. Like you, turn the phone off, both IP addresses go away....turn it back on, they reappear. -
Unknown Network Activity Originating From Mac Mini
Hi All,
I checked my firewall logs this morning after connecting the mac, and made a worrying discovery: it appears that my MAC is trying to authenticate against some services that I don't recall setting up.
Here is the log:
07:48:40 eth0 » eth2 UDP 192.168.15.6 123(NTP) 17.151.16.20 123(NTP)
07:50:31 eth0 » eth2 UDP 192.168.15.117 64515 208.67.219.132 750(KERBEROS-IV)
07:50:36 eth0 » eth2 UDP 192.168.15.117 49175 208.67.219.132 750(KERBEROS-IV)
07:50:54 eth0 » eth2 TCP 192.168.15.117 49159 208.67.219.132 389(LDAP)
07:50:55 eth0 » eth2 UDP 192.168.15.117 63460 208.67.219.132 750(KERBEROS-IV)
07:51:18 eth0 » eth2 UDP 192.168.15.117 63506 208.67.219.132 750(KERBEROS-IV)
07:51:24 eth0 » eth2 UDP 192.168.15.117 123(NTP) 208.67.219.132 123(NTP)
07:51:26 eth0 » eth2 UDP 192.168.15.117 123(NTP) 208.67.219.132 123(NTP)
07:51:28 eth0 » eth2 UDP 192.168.15.117 123(NTP) 208.67.219.132 123(NTP)
07:51:30 eth0 » eth2 UDP 192.168.15.117 123(NTP) 208.67.219.132 123(NTP)
07:51:32 eth0 » eth2 UDP 192.168.15.117 123(NTP) 208.67.219.132 123(NTP)
07:51:34 eth0 » eth2 UDP 192.168.15.117 123(NTP) 208.67.219.132 123(NTP)
07:51:36 eth0 » eth2 UDP 192.168.15.117 123(NTP) 208.67.219.132 123(NTP)
07:51:37 eth0 » eth2 UDP 192.168.15.117 65477 208.67.219.132 750(KERBEROS-IV)
07:51:38 eth0 » eth2 UDP 192.168.15.117 123(NTP) 208.67.219.132 123(NTP)
07:51:40 eth0 » eth2 UDP 192.168.15.117 123(NTP) 208.67.219.132 123(NTP)
07:51:58 eth0 » eth2 TCP 192.168.15.117 49171 208.67.219.132 548(AFPOVERTCP)
07:51:58 eth0 » eth2 TCP 192.168.15.117 49172 208.67.219.132 548(AFPOVERTCP)
07:51:58 eth0 » eth2 TCP 192.168.15.117 49173 208.67.219.132 548(AFPOVERTCP)
07:51:58 eth0 » eth2 TCP 192.168.15.117 49174 208.67.219.132 548(AFPOVERTCP)
07:52:13 eth0 » eth2 TCP 192.168.15.117 49176 208.67.219.132 548(AFPOVERTCP)
07:53:21 eth0 » eth2 UDP 192.168.15.117 65046 160.39.195.181 22815
07:53:22 eth0 » eth2 UDP 192.168.15.117 65046 68.95.129.61 58380
07:53:22 eth0 » eth2 UDP 192.168.15.117 65046 129.89.189.92 5186
07:53:22 eth0 » eth2 UDP 192.168.15.117 65046 68.196.203.129 61438
07:53:22 eth0 » eth2 UDP 192.168.15.117 65046 66.25.142.34 50348
07:53:28 eth0 » eth2 TCP 192.168.15.117 49178 66.25.142.34 50348
07:53:28 eth0 » eth2 TCP 192.168.15.117 49179 160.39.195.181 22815
07:53:28 eth0 » eth2 TCP 192.168.15.117 49180 68.46.121.61 1068
07:53:28 eth0 » eth2 TCP 192.168.15.117 49181 76.244.156.85 40875
07:53:29 eth0 » eth2 TCP 192.168.15.117 49187 204.9.163.214 12350
07:53:29 eth0 » eth2 TCP 192.168.15.117 49188 204.9.163.214 12350
07:53:29 eth0 » eth2 UDP 192.168.15.117 65046 24.124.62.110 28918
07:53:29 eth0 » eth2 UDP 192.168.15.117 65046 196.44.156.141 12452
07:53:29 eth0 » eth2 UDP 192.168.15.117 65046 118.93.87.28 3813
07:53:29 eth0 » eth2 UDP 192.168.15.117 65046 174.117.165.146 36845
07:53:34 eth0 » eth2 UDP 192.168.15.117 65046 24.124.62.110 28918
07:53:34 eth0 » eth2 UDP 192.168.15.117 65046 196.44.156.141 12452
07:53:39 eth0 » eth2 UDP 192.168.15.117 65046 24.124.62.110 28918
07:53:39 eth0 » eth2 UDP 192.168.15.117 65046 196.44.156.141 12452
07:53:44 eth0 » eth2 UDP 192.168.15.117 65046 24.124.62.110 28918
07:53:44 eth0 » eth2 UDP 192.168.15.117 65046 196.44.156.141 12452
07:53:49 eth0 » eth2 UDP 192.168.15.117 65046 24.124.62.110 28918
07:53:49 eth0 » eth2 UDP 192.168.15.117 65046 196.44.156.141 12452
These are all items that I don't recognize. I have my mini set up with a mobil account, but I have a different IP set up in VPN for that to use. And once I have VPN activated, I use a local network account from my XServe that is running OpenDirectory to take care of all the authentication, etc.
The only items I have listed for automatic startup are:
- MCXMenuExtraTool
- Skype
- SpeechSynthesisServer
- iTunesHelper
From what I can tell, only Skype has been added by me.
Any ideas?
Thanks,
Mike Bronner
Message was edited by: Miggl
Message was edited by: MigglWell, let's see. NTP is the network time protocol, which keeps the system clock set to the correct time by checking with a server that is synchronized with a reference clock (in this case, it's checking with the NTP server at Apple that's sychronized with an atomic clock at the National Institute of Standards and Technology).
Then there's a bunch of traffic to OpenDNS.org (208.67.219.132) -- probably your machine checking to see if it has permission to update the DNS server with your machine's username and password (which it doesn't have permission to do).
The remainder look to be home broadband accounts -- probably pings from infected home computers looking for a mate. It's surprising that your router/gateway lets that sort of thing through. Do you have all the traffic forwarded to your Mac without any filter? Is there no gateway between the machine and your ISP? -
Compliance Unknown - Client Check passed/Active
I am running SCCM 2012 R2 in a test environment. My setup is very simple in that I only have around a dozen machines in it and I only have one site server.
I have a couple of software deployments for my baseline updates and when I check these all of my machines are green and compliant. However, I have another deployment that is created via an ADR and most of my machines are green and compliant except two which
are stuck on the Unknown tab saying "client check passed/Active". I have rebooted them, kicked off every action, refreshed, run summarization, reinstalled the client - yet none of these seem to be having any effect. Keep in mind these two machines
are also in my 'baseline' deployments and they are reporting back just fine. For whatever reason, they are stuck as unknown in my ADR deployment.
I've checked on a few of the logs and haven't stumbled across anything that stuck out but if anyone could kindly point me in the direction of the logs that are relevant to this issue I would appreciate it.
EDIT 1:
I ran the 'Compliance 1 - Overall Compliance' report against the ADR deployment and my test collection and the two machines in question came back as "Non-compliant" rather than compliance state unknown... which I find interesting
EDIT 2:
In my past experiences with SCCM 2012, I had very similar issues related to checking compliance. We would have a ton of machines go into the 'unknown' state and several other weird issues. We had a complex environment at my past job so I figured this evaluation
would go much smoother since I have one site system and a dozen test machines. It makes me nervous that I am already experiencing similar issues. I am also shocked I can't find more info when searching related to machines reporting back as
Unknown Passed/Active...One of the servers in question has not received updates since February. Here is WUAHandler.log and updatesHandler.log - I don't see anything that sticks out. Most logs appear to be acting normal and don't have any glaring errors being reported. I do not
have any updates showing up in the software center on the server in question. It is the same OS and image as other servers that are working. Please let me know if you would like to see a different log....
WUAHandler.log (timestamps removed for readability)
Its a WSUS Update Source type ({E280636E-013D-473D-96D6-E9A09826B935}), adding it.
Existing WUA Managed server was already set (**EDITED OUT**), skipping Group Policy registration.
Added Update Source ({E280636E-013D-473D-96D6-E9A09826B935}) of content type: 2
Scan results will include superseded updates only when they are superseded by service packs and definition updates.
Search Criteria is (DeploymentAction=* AND Type='Software') OR (DeploymentAction=* AND Type='Driver')
Async searching of updates using WUAgent started.
Async searching completed.
Successfully completed scan.
Scan results will include superseded updates only when they are superseded by service packs and definition updates.
Search Criteria is ((DeploymentAction=* AND Type='Software' AND CategoryIDs contains '0FA1201D-4330-4FA8-8AE9-B877473B6441') OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains
'FDFE8200-9D98-44BA-A12A-772282BF60EF') OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains '7F44C2A7-BC36-470B-BE3B-C01B6DC5DD4E') OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains 'BA0AE9CC-5F01-40B4-AC3F-50192B5D6AAF')
OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains 'BFE5B177-A086-47A0-B102-097E4FA1F807') OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains 'A105A108-7C9B-4518-BBBE-73F0FE30012B') OR (DeploymentAction=*
AND Type='Software' AND CategoryIDs contains '2EE2AD83-828C-4405-9479-544D767993FC') OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains 'E6CF1350-C01B-414D-A61F-263D14D133B4'))
Async searching of updates using WUAgent started.
Async searching completed.
Successfully completed scan.
Scan results will include superseded updates only when they are superseded by service packs and definition updates.
Search Criteria is ((DeploymentAction=* AND Type='Software' AND CategoryIDs contains '7F44C2A7-BC36-470B-BE3B-C01B6DC5DD4E') OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains
'DBF57A08-0D5A-46FF-B30C-7715EB9498E9'))
Async searching of updates using WUAgent started.
Async searching completed.
Successfully completed scan.
Scan results will include superseded updates only when they are superseded by service packs and definition updates.
Search Criteria is ((DeploymentAction=* AND Type='Software' AND CategoryIDs contains 'FDFE8200-9D98-44BA-A12A-772282BF60EF') OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains
'7F44C2A7-BC36-470B-BE3B-C01B6DC5DD4E') OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains 'BFE5B177-A086-47A0-B102-097E4FA1F807') OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains 'BA0AE9CC-5F01-40B4-AC3F-50192B5D6AAF')
OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains 'CB263E3F-6C5A-4B71-88FA-1706F9549F51') OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains '2EE2AD83-828C-4405-9479-544D767993FC') OR (DeploymentAction=*
AND Type='Software' AND CategoryIDs contains '0FA1201D-4330-4FA8-8AE9-B877473B6441') OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains '3B4B8621-726E-43A6-B43B-37D07EC7019F') OR (DeploymentAction=* AND Type='Software'
AND CategoryIDs contains 'E6CF1350-C01B-414D-A61F-263D14D133B4') OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains 'A105A108-7C9B-4518-BBBE-73F0FE30012B') OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains
'DBF57A08-0D5A-46FF-B30C-7715EB9498E9') OR (DeploymentAction=* AND Type='Software' AND CategoryIDs contains '9B135DD5-FC75-4609-A6AE-FB5D22333EF0'))
Async searching of updates using WUAgent started.
Async searching completed.
Successfully completed scan.
UpdatesHandler.log (timestamps removed for readability)
Initiating updates scan for checking applicability.
Successfully initiated scan.
Updates scan completion received, result = 0x0.
Initiating updates scan for checking applicability.
Successfully initiated scan.
Updates scan completion received, result = 0x0.
Initiating updates scan for checking applicability.
Successfully initiated scan.
Updates scan completion received, result = 0x0.
Method (Discover) called from SDM.
Starting job with id = {A007C151-234D-4EEF-9907-4E029C0FDBBD}
Initiating Scan. Forced = (0)
Successfully initiated scan for job ({A007C151-234D-4EEF-9907-4E029C0FDBBD}).
Scan completion received for job ({A007C151-234D-4EEF-9907-4E029C0FDBBD}).
Evaluating status of the updates for the job ({A007C151-234D-4EEF-9907-4E029C0FDBBD}).
Successfully sent job ({A007C151-234D-4EEF-9907-4E029C0FDBBD}) success completion to the SdmAgent
CompleteJob received from SDM.
Complete - Job ({A007C151-234D-4EEF-9907-4E029C0FDBBD}) Cleanup.
CompleteJob - Job ({A007C151-234D-4EEF-9907-4E029C0FDBBD}) removed from job manager list.
Initiating updates scan for checking applicability.
Successfully initiated scan.
Updates scan completion received, result = 0x0.
Method (Download) called from SDM.
Starting job with id = {FB0A56F7-0247-45C0-A4E2-D7A3CFF91BBD}
Initiating Scan. Forced = (0)
Successfully initiated scan for job ({FB0A56F7-0247-45C0-A4E2-D7A3CFF91BBD}).
Scan completion received for job ({FB0A56F7-0247-45C0-A4E2-D7A3CFF91BBD}).
Evaluating status of the updates for the job ({FB0A56F7-0247-45C0-A4E2-D7A3CFF91BBD}).
Initiating download for the job ({FB0A56F7-0247-45C0-A4E2-D7A3CFF91BBD}).
Bundle update (39d68759-cc66-4fa4-8907-096b610c9583) is requesting download from child updates for action (INSTALL)
Starting download on action (INSTALL) for Update (46201763-6bf4-47f9-8d9c-b6549bb32a3b)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Contents already available.
StateCore - bundle update (39d68759-cc66-4fa4-8907-096b610c9583) state changed from (WAIT_CONTENTS) to (EXECUTE_READY) as child update state changed
Bundle update (67c66c9f-bef4-4057-860f-0dbbd2fc25dd) is requesting download from child updates for action (INSTALL)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Starting download on action (INSTALL) for Update (8efab745-b428-4bab-9933-822857c11e03)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Contents already available.
StateCore - bundle update (67c66c9f-bef4-4057-860f-0dbbd2fc25dd) state changed from (WAIT_CONTENTS) to (EXECUTE_READY) as child update state changed
Bundle update (8263f7a7-6ed2-48a9-90bd-05a361e0a81f) is requesting download from child updates for action (INSTALL)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Starting download on action (INSTALL) for Update (ebb06d79-b446-432d-b26d-0bd168e58192)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Contents already available.
StateCore - bundle update (8263f7a7-6ed2-48a9-90bd-05a361e0a81f) state changed from (WAIT_CONTENTS) to (EXECUTE_READY) as child update state changed
Bundle update (8f7e4dbd-be3f-463b-bb5a-55b33039a023) is requesting download from child updates for action (INSTALL)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Starting download on action (INSTALL) for Update (8d7948a9-3fd9-4430-b790-0511a7cb4502)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Contents already available.
StateCore - bundle update (8f7e4dbd-be3f-463b-bb5a-55b33039a023) state changed from (WAIT_CONTENTS) to (EXECUTE_READY) as child update state changed
Bundle update (9550b374-112f-42ab-80a0-8caba8652e59) is requesting download from child updates for action (INSTALL)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Starting download on action (INSTALL) for Update (8a454fff-d319-4bb0-bb00-76a67f07c88f)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Contents already available.
StateCore - bundle update (9550b374-112f-42ab-80a0-8caba8652e59) state changed from (WAIT_CONTENTS) to (EXECUTE_READY) as child update state changed
Download completed for the job ({FB0A56F7-0247-45C0-A4E2-D7A3CFF91BBD}).
Successfully sent job ({FB0A56F7-0247-45C0-A4E2-D7A3CFF91BBD}) success completion to the SdmAgent
CompleteJob received from SDM.
Complete - Job ({FB0A56F7-0247-45C0-A4E2-D7A3CFF91BBD}) Cleanup.
CompleteJob - Job ({FB0A56F7-0247-45C0-A4E2-D7A3CFF91BBD}) removed from job manager list.
Initiating updates scan for checking applicability.
Successfully initiated scan.
Initiating updates scan for checking applicability.
Successfully initiated scan.
Initiating updates scan for checking applicability.
Successfully initiated scan.
Updates scan completion received, result = 0x0.
Updates scan completion received, result = 0x0.
Method (Discover) called from SDM.
Starting job with id = {EB8A0FE5-B84E-471A-9658-3607767C7CCE}
Initiating Scan. Forced = (0)
Successfully initiated scan for job ({EB8A0FE5-B84E-471A-9658-3607767C7CCE}).
Scan completion received for job ({EB8A0FE5-B84E-471A-9658-3607767C7CCE}).
Evaluating status of the updates for the job ({EB8A0FE5-B84E-471A-9658-3607767C7CCE}).
Successfully sent job ({EB8A0FE5-B84E-471A-9658-3607767C7CCE}) success completion to the SdmAgent
Updates scan completion received, result = 0x0.
CompleteJob received from SDM.
Complete - Job ({EB8A0FE5-B84E-471A-9658-3607767C7CCE}) Cleanup.
CompleteJob - Job ({EB8A0FE5-B84E-471A-9658-3607767C7CCE}) removed from job manager list.
Initiating updates scan for checking applicability.
Successfully initiated scan.
Updates scan completion received, result = 0x0.
Method (Download) called from SDM.
Starting job with id = {CD1BC7C4-1BFF-44D1-B206-6BC650B4D54C}
Initiating Scan. Forced = (0)
Successfully initiated scan for job ({CD1BC7C4-1BFF-44D1-B206-6BC650B4D54C}).
Scan completion received for job ({CD1BC7C4-1BFF-44D1-B206-6BC650B4D54C}).
Evaluating status of the updates for the job ({CD1BC7C4-1BFF-44D1-B206-6BC650B4D54C}).
Initiating download for the job ({CD1BC7C4-1BFF-44D1-B206-6BC650B4D54C}).
Bundle update (39d68759-cc66-4fa4-8907-096b610c9583) is requesting download from child updates for action (INSTALL)
Starting download on action (INSTALL) for Update (46201763-6bf4-47f9-8d9c-b6549bb32a3b)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Contents already available.
StateCore - bundle update (39d68759-cc66-4fa4-8907-096b610c9583) state changed from (WAIT_CONTENTS) to (EXECUTE_READY) as child update state changed
Bundle update (67c66c9f-bef4-4057-860f-0dbbd2fc25dd) is requesting download from child updates for action (INSTALL)
Starting download on action (INSTALL) for Update (8efab745-b428-4bab-9933-822857c11e03)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Contents already available.
StateCore - bundle update (67c66c9f-bef4-4057-860f-0dbbd2fc25dd) state changed from (WAIT_CONTENTS) to (EXECUTE_READY) as child update state changed
Bundle update (8263f7a7-6ed2-48a9-90bd-05a361e0a81f) is requesting download from child updates for action (INSTALL)
Starting download on action (INSTALL) for Update (ebb06d79-b446-432d-b26d-0bd168e58192)
Contents already available.
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
Ignoring update state (DOWNLOAD_READY) change in job state (2) -
Helo:
I have a Maxtor 160gb 8Mb sata....
I can't make sata activity led to work...it works fine....with PATA drives...but no with SATA?
Is see some people have the same mobo ans sata drive...and the led is working fine....
Do u have an idea?Quote
I notice that my self and had tried what Raven_ suggested ( o&o led) but I'm happy now with out the led I don't need it any how
that i cant live with.
i destroyed a harddrive once when i rebooted and it started to read/write at the same moment.
when i use my addon ide controller card i use the power led and connect to that card to se activity.
i dont know if it can be found on new harddrives but i have seen alot if older harddrives where you can connect a led.
also some harddrives has a led onboard that shows activity -
Vlan interface "unknown protocol drops"
Hello
I have a satellite office that connects via VPN back to my Corporate office.
The VPN is terminated on an Cisco 891.
I have received complaints from the user's there that their Citrix session hangs on them. They can then reconnect the session and
find the session was still going as they started back where they left off. There are several pc's that experiewnce the same issue.
The Citrix server has been checked out. The PC's have been checked out and re-imaged just to make sure.
I see on the Vlan interfacfe on the 9891 there are alot of unknown protocol drops.
What does this mean and could it be the cause of the session hang?
Vlan10 is up, line protocol is up
Hardware is EtherSVI, address is 4403.abcd.efgh (bia 4403.abcd.efgh)
Internet address is 10.x.221.1/24
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not supported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:05, output never, output hang never
Last clearing of "show interface" counters 22:43:53
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 1000 bits/sec, 1 packets/sec
5 minute output rate 1000 bits/sec, 1 packets/sec
218197 packets input, 33432444 bytes, 0 no buffer
Received 6568 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
189384 packets output, 79892307 bytes, 0 underruns
0 output errors, 0 interface resets
7433 unknown protocol drops
0 output buffer failures, 0 output buffers swapped outDisclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
If you're running Citrix across a VPN, that crosses the Internet (?), I would be first concerned about transient latency and/or packet drops. I would also be concerned whether your VPN has been configured to avoid packet fragmentation. -
X200 Intel Active Management default password??
Hello,
I brought a Lenovo x200s and directly downgraded it to windows XP.
Then I installed a personal firewall and recognized huge harddrive activity. So i checked the log and recognized the initiator: lms.exe. It belongs to Intel(R) Active Management Technology Local Manageability Service.
I don't need the whole thing and checked the settings in control panel, but noting can be configured. This has to be done during boot. After pressing CTRL+P the Intel Management Engine Bios Extension asks for a Intel ME Passwort
I have never entered any. What's the default one?
Thanks...
Greetings from good old Germany
Solved!
Go to Solution.Hello Canzler, welcome to Lenovo forums!
Here at thinkwiki.org you´ll find a guide, how to setup Intel Active ManagementTechnology AMT.
Message Edited by Agotthelf on 03-04-2009 10:11 AM
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
How to create a new field in a sub screen in material master. ?
How to create a new field in a sub screen in material master. ?
Kindly help us.
LIke wise tell me how to create a new sub screen as per my desiredFollow the documentation of Logistics - General->Material Master->Configuring the Material Master->Create Program for Customized Subscreens to add the new field in material master.
Create Program for Customized Subscreens
In this IMG activity, you can create a function group of your own by copying function group MGD1 (for industry) or function group MGD2 (for retail). The subscreens are not copied, except for two subscreens which are copied for technical reasons. You can use this copy to create subscreens of your own which you can assign to a data screen in the activity Define Structure of Data Screens for Each Screen Sequence.
Requirements
Be sure to read the program documentation first.
Activities
1. Create a function group of your own by choosing Execute.
2. Enter a name containing up to 25 characters, beginning with the letter Y or Z, and choose Save.
3. Access the Object Navigator.
You do this from the SAP standard menu by choosing Tools -> ABAP Workbench, and then Object Navigator.
4. Display either program SAPLMGD1 (industry) or SAPLMGD2 (retail) as required.
5. Copy the subscreens as required, ensuring that they already contain as many as possible of the field names you want to use in your function group. You do this as follows:
a) Choose Screens, position the cursor on the corresponding subscreen, and choose Copy in the context menu.
b) Enter the program to which you want to copy the subscreen, prefixing it with SAPL, and enter a screen number. Use the screen number of the original subscreen where possible. If the F1 help is specific to a particular subscreen, this ensures that this context-specific help continues to be displayed.
Example
You have called your function group YENTERPRISE, to which you want to copy subscreen SAPLMGD1 2301. Enter SAPLYENTERPRISE as the program to which the subscreen is to be copied, and enter (preferably) 2301 as the screen number.
6. Return to the initial screen of the Object Navigator and display your program. In the example above, you would enter SAPLYENTERPRISE.
7. Choose Update object list.
8. Select the subscreen you have copied and activate it by choosing Activate in the context menu.
Using the Screen Painter, you can remove fields you do not require on the subscreen or include additional fields from other subscreens (see the ABAP Dictionary). For information on the Screen Painter, see the SAP library documentation BC ABAP Workbench Tools.
Points to consider when removing or adding fields
Make sure that a field statement exists for each field on the subscreen since data may not otherwise be transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
For the fields you have added, include any check modules and modules for self-programmed F4 help that are called up for these fields on the original subscreen. You can do this by displaying the flow logic for the original subscreen and searching for such modules. They normally have the same names as the fields themselves. When you find a module, copy the corresponding module call to your subscreen.
If you change the order in which fields are transported that are checked together in the flow logic (such as the safety stock and minimum safety stock), you must deactivate the check module for the first field and activate it for the second. The system would otherwise transport the first field, and carry out the check before the second field is transported.
Any error messages that fields are unknown when activating the subscreen are due to the fields still being included in checks, even though you have removed the fields from the subscreen. Search for the fields in the source code and make the lines in which they appear comment lines. Then reactivate the screen.
9. Assign the subscreen to a data screen as required.
Note on transport
Use the Workbench Organizer to transport the copy you have created.
Proceed -
I am installing Solution Manager 4 R2 with MaxDB, I have "j2sdk1.4.2_09" at the start of the machine's presenting me java errors, they attached the contents of the "sapinst.log
INFO 2008-11-22 20:46:13
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/inifile.2.xml'.
INFO 2008-11-22 20:46:13
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/inifile.3.xml'.
INFO 2008-11-22 20:46:24
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-11-22 20:46:48
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS/keydb.2.xml'.
INFO 2008-11-22 20:46:49
Execute step startJava of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0.
WARNING 2008-11-22 20:46:51
Connect to message server (SOLMAN/3901) failed: NIECONN_REFUSED.
WARNING 2008-11-22 20:46:54
Connect to message server (SOLMAN/3900) failed: NIECONN_REFUSED.
WARNING 2008-11-22 20:46:55
Connect to message server (SOLMAN/3900) failed: NIECONN_REFUSED.
INFO 2008-11-22 20:46:55
Starting instance SOL/SCS01...
WARNING 2008-11-22 20:46:56
Connect to message server (SOLMAN/3901) failed: NIECONN_REFUSED.
INFO 2008-11-22 20:46:57
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ADA\CENTRAL\AS\stop_SOL_SCS01.log.
INFO 2008-11-22 20:46:59
Output of C:\usr\sap\SOL\SYS\exe\uc\NTI386\stopsap.exe name=SOL nr=01 SAPDIAHOST=SOLMAN is written to the logfile stop_SOL_SCS01.log.
INFO 2008-11-22 20:47:20
Execution of the command "C:\usr\sap\SOL\SYS\exe\uc\NTI386\stopsap.exe name=SOL nr=01 SAPDIAHOST=SOLMAN" finished with return code 0. Output:
STOPSAP executed succesfully
WARNING 2008-11-22 20:47:21
Connect to message server (SOLMAN/3901) failed: NIECONN_REFUSED.
INFO 2008-11-22 20:47:21
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ADA\CENTRAL\AS\start_SOL_SCS01.log.
INFO 2008-11-22 20:47:21
Output of C:\usr\sap\SOL\SYS\exe\uc\NTI386\startsap.exe name=SOL nr=01 SAPDIAHOST=SOLMAN is written to the logfile start_SOL_SCS01.log.
INFO 2008-11-22 20:47:49
Execution of the command "C:\usr\sap\SOL\SYS\exe\uc\NTI386\startsap.exe name=SOL nr=01 SAPDIAHOST=SOLMAN" finished with return code 0. Output:
STARTSAP continues...
INFO 2008-11-22 20:47:49
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:47:49
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:47:49
State of instance SOL/SCS01 changed from UNKNOWN to ACTIVE.
INFO 2008-11-22 20:47:49
Startup of instance SOL/SCS01 finished: [ACTIVE]. Elapsed time: 0:00 minutes.
INFO 2008-11-22 20:47:49
Starting instance SOL/DVEBMGS00...
WARNING 2008-11-22 20:47:50
Connect to message server (SOLMAN/3900) failed: NIECONN_REFUSED.
INFO 2008-11-22 20:47:50
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:47:50
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:47:50
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:47:50
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:47:52
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ADA\CENTRAL\AS\stop_SOL_DVEBMGS00.log.
INFO 2008-11-22 20:47:52
Output of C:\usr\sap\SOL\SYS\exe\uc\NTI386\stopsap.exe name=SOL nr=00 SAPDIAHOST=SOLMAN is written to the logfile stop_SOL_DVEBMGS00.log.
INFO 2008-11-22 20:48:02
Execution of the command "C:\usr\sap\SOL\SYS\exe\uc\NTI386\stopsap.exe name=SOL nr=00 SAPDIAHOST=SOLMAN" finished with return code 0. Output:
STOPSAP executed succesfully
INFO 2008-11-22 20:48:03
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:48:03
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:48:03
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:48:03
Disconnect from message server (SOLMAN/3901) succeeded.
WARNING 2008-11-22 20:48:04
Connect to message server (SOLMAN/3900) failed: NIECONN_REFUSED.
INFO 2008-11-22 20:48:05
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ADA\CENTRAL\AS\start_SOL_DVEBMGS00.log.
INFO 2008-11-22 20:48:05
Output of C:\usr\sap\SOL\SYS\exe\uc\NTI386\startsap.exe name=SOL nr=00 SAPDIAHOST=SOLMAN is written to the logfile start_SOL_DVEBMGS00.log.
WARNING 2008-11-22 20:51:43
Execution of the command "C:\usr\sap\SOL\SYS\exe\uc\NTI386\startsap.exe name=SOL nr=00 SAPDIAHOST=SOLMAN" finished with return code -1. Output:
STARTSAP failed
Details are written to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ADA\CENTRAL\AS\startSOL.log
INFO 2008-11-22 20:51:55
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:51:55
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:51:55
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:51:55
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:52:10
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:52:10
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:52:10
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:52:10
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:52:12
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:52:12
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:52:12
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:52:12
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:52:12
State of instance SOL/DVEBMGS00 changed from ABAP: UNKNOWN, Java: UNKNOWN to ABAP: UNKNOWN, Java: UNKNOWN.
INFO 2008-11-22 20:52:31
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:52:31
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:52:31
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:52:31
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:52:32
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:52:32
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:52:32
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:52:32
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:52:32
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:52:32
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:52:32
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:52:32
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:52:32
State of instance SOL/DVEBMGS00 changed from ABAP: STARTING, Java: (dispatcher: RUNNING, server0: UNKNOWN) to ABAP: STARTING, Java: (dispatcher: RUNNING, server0: UNKNOWN).
ERROR 2008-11-22 20:52:35
CJS-30151 Java process server0 of instance SOL/DVEBMGS00 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 4:00 minutes. Giving up.
ERROR 2008-11-22 20:52:36
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR .
INFO 2008-11-22 20:54:02
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava".
INFO 2008-11-22 20:54:10
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:54:10
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:54:10
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:54:10
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:54:37
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:54:37
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:54:37
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:54:37
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:54:45
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:54:45
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:54:45
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:54:45
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:54:52
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:54:52
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:54:52
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:54:52
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:55:19
RFC parameter CLIENT set to value 001.
INFO 2008-11-22 20:55:20
RFC parameter USER set to value DDIC.
INFO 2008-11-22 20:55:20
RFC parameter LCHECK set to value 1.
INFO 2008-11-22 20:55:20
RFC parameter PCS set to value 1.
INFO 2008-11-22 20:55:20
RFC parameter LANG set to value EN.
INFO 2008-11-22 20:55:20
RFC parameter ASHOST set to value solman.
INFO 2008-11-22 20:55:20
RFC parameter SYSNR set to value 00.
INFO 2008-11-22 20:55:20
RFC connection information checked successfully.
INFO 2008-11-22 20:55:26
RFC connection opened successfully.
INFO 2008-11-22 20:55:26
Setting new application function RFC_SYSTEM_INFO.
INFO 2008-11-22 20:55:26
Generating interface for remote function.
INFO 2008-11-22 20:55:31
Function call was successful.
INFO 2008-11-22 20:55:31
Function interface generated successfully.
INFO 2008-11-22 20:55:31
Technical properties of function set successfully.
INFO 2008-11-22 20:55:31
Information for application function RFC_SYSTEM_INFO copied to local Repository.
INFO 2008-11-22 20:55:31
Function module RFC_SYSTEM_INFO set successfully.
INFO 2008-11-22 20:55:31
Executing function call RFC_SYSTEM_INFO.
INFO 2008-11-22 20:55:31
Function call was successful.
INFO 2008-11-22 20:55:31
Version 700 of remote SAP System SOL accepted.
INFO 2008-11-22 20:55:31
Setting new application function RFC_ABAP_INSTALL_AND_RUN.
INFO 2008-11-22 20:55:31
Generating interface for remote function.
INFO 2008-11-22 20:55:32
Function call was successful.
INFO 2008-11-22 20:55:32
Function interface generated successfully.
INFO 2008-11-22 20:55:32
Technical properties of function set successfully.
INFO 2008-11-22 20:55:32
Information for application function RFC_ABAP_INSTALL_AND_RUN copied to local Repository.
INFO 2008-11-22 20:55:32
Function module RFC_ABAP_INSTALL_AND_RUN set successfully.
INFO 2008-11-22 20:55:32
Executing function call RFC_ABAP_INSTALL_AND_RUN.
INFO 2008-11-22 20:55:37
Function call was successful.
INFO 2008-11-22 20:55:40
Function module RFC_ABAP_INSTALL_AND_RUN set successfully.
INFO 2008-11-22 20:55:40
Executing function call RFC_ABAP_INSTALL_AND_RUN.
INFO 2008-11-22 20:55:41
Function call was successful.
INFO 2008-11-22 20:55:46
Function module RFC_ABAP_INSTALL_AND_RUN set successfully.
INFO 2008-11-22 20:55:46
Executing function call RFC_ABAP_INSTALL_AND_RUN.
INFO 2008-11-22 20:55:46
Function call was successful.
INFO 2008-11-22 20:55:54
Function module RFC_ABAP_INSTALL_AND_RUN set successfully.
INFO 2008-11-22 20:55:54
Executing function call RFC_ABAP_INSTALL_AND_RUN.
INFO 2008-11-22 20:55:54
Function call was successful.
INFO 2008-11-22 20:56:03
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:56:03
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:56:03
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:56:03
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:56:21
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:56:21
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:56:21
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:56:21
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:56:45
Function module RFC_ABAP_INSTALL_AND_RUN set successfully.
INFO 2008-11-22 20:56:45
Executing function call RFC_ABAP_INSTALL_AND_RUN.
INFO 2008-11-22 20:56:45
Function call was successful.
INFO 2008-11-22 20:56:48
Function module RFC_ABAP_INSTALL_AND_RUN set successfully.
INFO 2008-11-22 20:56:48
Executing function call RFC_ABAP_INSTALL_AND_RUN.
INFO 2008-11-22 20:56:48
Function call was successful.
INFO 2008-11-22 20:56:48
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:56:48
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:56:48
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:56:48
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:56:58
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:56:58
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:56:58
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:56:58
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:57:07
State of instance SOL/DVEBMGS00 changed from ABAP: UNKNOWN, Java: UNKNOWN to ABAP: UNKNOWN, Java: UNKNOWN.
INFO 2008-11-22 20:57:29
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:57:29
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:57:29
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:57:29
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:57:42
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:57:42
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:57:42
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:57:42
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:58:13
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:58:13
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:58:13
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:58:13
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:58:22
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:58:22
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:58:22
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:58:22
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:58:53
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:58:53
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:58:53
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:58:53
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:59:29
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:59:29
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:59:29
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:59:29
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 20:59:30
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:59:30
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:59:30
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:59:30
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 20:59:55
State of instance SOL/DVEBMGS00 changed from ABAP: ACTIVE, Java: UNKNOWN to ABAP: ACTIVE, Java: UNKNOWN.
INFO 2008-11-22 21:00:13
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:00:13
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:00:13
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:00:13
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:00:28
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:00:28
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:00:28
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:00:28
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:00:29
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:00:29
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:00:29
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:00:29
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:00:39
State of instance SOL/DVEBMGS00 changed from ABAP: ACTIVE, Java: (dispatcher: STARTING, server0: UNKNOWN) to ABAP: ACTIVE, Java: (dispatcher: STARTING, server0: UNKNOWN).
INFO 2008-11-22 21:01:06
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:01:06
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:01:06
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:01:06
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:01:50
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:01:50
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:01:50
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:01:50
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:01:50
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:01:50
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:01:50
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:01:50
Disconnect from message server (SOLMAN/3900) succeeded.
ERROR 2008-11-22 21:01:57
CJS-30151 Java process server0 of instance SOL/DVEBMGS00 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 4:00 minutes. Giving up.
ERROR 2008-11-22 21:01:57
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR .
INFO 2008-11-22 21:02:06
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava".
INFO 2008-11-22 21:02:07
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:02:07
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:02:07
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:02:07
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:02:34
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:02:34
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:02:34
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:02:34
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:02:54
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:02:54
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:02:54
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:02:54
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:03:18
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:03:18
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:03:18
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:03:18
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:03:29
Function module RFC_ABAP_INSTALL_AND_RUN set successfully.
INFO 2008-11-22 21:03:29
Executing function call RFC_ABAP_INSTALL_AND_RUN.
INFO 2008-11-22 21:03:30
Function call was successful.
INFO 2008-11-22 21:03:43
Function module RFC_ABAP_INSTALL_AND_RUN set successfully.
INFO 2008-11-22 21:03:43
Executing function call RFC_ABAP_INSTALL_AND_RUN.
INFO 2008-11-22 21:03:43
Function call was successful.
INFO 2008-11-22 21:03:56
Function module RFC_ABAP_INSTALL_AND_RUN set successfully.
INFO 2008-11-22 21:03:56
Executing function call RFC_ABAP_INSTALL_AND_RUN.
INFO 2008-11-22 21:03:56
Function call was successful.
INFO 2008-11-22 21:04:14
Function module RFC_ABAP_INSTALL_AND_RUN set successfully.
INFO 2008-11-22 21:04:15
Executing function call RFC_ABAP_INSTALL_AND_RUN.
INFO 2008-11-22 21:04:15
Function call was successful.
INFO 2008-11-22 21:04:40
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:04:40
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:04:40
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:04:40
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:04:52
Function module RFC_ABAP_INSTALL_AND_RUN set successfully.
INFO 2008-11-22 21:04:52
Executing function call RFC_ABAP_INSTALL_AND_RUN.
INFO 2008-11-22 21:04:52
Function call was successful.
INFO 2008-11-22 21:05:06
Function module RFC_ABAP_INSTALL_AND_RUN set successfully.
INFO 2008-11-22 21:05:06
Executing function call RFC_ABAP_INSTALL_AND_RUN.
INFO 2008-11-22 21:05:07
Function call was successful.
INFO 2008-11-22 21:05:07
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:05:07
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:05:07
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:05:07
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:05:21
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:05:21
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:05:21
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:05:21
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:05:42
State of instance SOL/DVEBMGS00 changed from ABAP: UNKNOWN, Java: UNKNOWN to ABAP: UNKNOWN, Java: UNKNOWN.
INFO 2008-11-22 21:05:55
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:05:55
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:05:55
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:05:55
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:06:21
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:06:21
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:06:21
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:06:21
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:06:57
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:06:57
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:06:57
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:06:57
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:07:24
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:07:24
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:07:24
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:07:24
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:07:24
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:07:24
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:07:24
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:07:24
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:07:48
State of instance SOL/DVEBMGS00 changed from ABAP: ACTIVE, Java: UNKNOWN to ABAP: ACTIVE, Java: UNKNOWN.
INFO 2008-11-22 21:08:11
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:08:11
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:08:11
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:08:11
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:08:50
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:08:50
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:08:50
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:08:50
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:08:50
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:08:50
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:08:50
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:08:50
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:08:55
State of instance SOL/DVEBMGS00 changed from ABAP: ACTIVE, Java: (dispatcher: STARTING, server0: UNKNOWN) to ABAP: ACTIVE, Java: (dispatcher: STARTING, server0: UNKNOWN).
INFO 2008-11-22 21:09:03
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:09:03
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:09:03
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:09:03
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:09:48
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:09:48
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:09:48
Connect to message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:09:48
Disconnect from message server (SOLMAN/3901) succeeded.
INFO 2008-11-22 21:09:49
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:09:49
Disconnect from message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:09:49
Connect to message server (SOLMAN/3900) succeeded.
INFO 2008-11-22 21:09:49
Disconnect from message server (SOLMAN/3900) succeeded.
ERROR 2008-11-22 21:10:08
CJS-30151 Java process server0 of instance SOL/DVEBMGS00 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 4:00 minutes. Giving up.
ERROR 2008-11-22 21:10:08
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR .
sapinst_dev.log
TRACE [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
2008-11-22 21:10:08.531 NWDIState._assertJavaProcessStateProgress() done
TRACE [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
2008-11-22 21:10:08.546 NWDIState._assertJavaProcessStatesProgress() done
TRACE [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
2008-11-22 21:10:08.546 NWDIState.unbalancedStates()
TRACE [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
2008-11-22 21:10:08.546 NWInstState.getElapsedString()
TRACE [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
2008-11-22 21:10:08.546 NWInstState.getElapsedString() done: 4:00
TRACE [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
2008-11-22 21:10:08.546 NWDIState.unbalancedStates() done: nw.progress.waitingForStartJavaFailed2SOLDVEBMGS00ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)4:00server0
TRACE [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
2008-11-22 21:10:08.546 NWDIState.unbalancedStates()
TRACE [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
2008-11-22 21:10:08.546 NWInstState.getElapsedString()
TRACE [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
2008-11-22 21:10:08.562 NWInstState.getElapsedString() done: 3:00
TRACE [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
2008-11-22 21:10:08.562 NWDIState.unbalancedStates() done: nw.progress.waitingForStartJavaFailed2SOLDVEBMGS00ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)3:00server0
TRACE [iaxxejsexp.cpp:199]
EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.progress.waitingForStartJavaFailed2:
Java process server0 of instance SOL/DVEBMGS00 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 4:00 minutes. Giving up.
ERROR 2008-11-22 21:10:08
CJSlibModule::writeError_impl()
CJS-30151 Java process server0 of instance SOL/DVEBMGS00 [ABAP: ACTIVE, Java: (dispatcher: RUNNING, server0: UNKNOWN)] did not start after 4:00 minutes. Giving up.
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-11-22 21:10:08 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR .
TRACE [iaxxgenimp.cpp:719]
showDialog()
<html><head></head><body><p>An error occurred while processing service <b>SAP Solution Manager 4.0 Support Release 2 > SAP Systems > MaxDB > Central System > Central System Installation</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/ADA/CENTRAL/AS</b>.</p></body></html>
TRACE [iaxxgenimp.cpp:1155]
showDialog()
waiting for an answer from gui
INFO 2008-11-22 23:01:26 [iaxxgenimp.cpp:782]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava".
start_SOL_DVEMGS00.log
STARTSAP failed
Details are written to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ADA\CENTRAL\AS\startSOL.log
startSOL.log
running C:\usr\sap\SOL\SYS\exe\uc\NTI386\sapstart.exe name=SOL nr=00 SAPDIAHOST=SOLMAN -wait
SAPSTART finished successfully on SOLMAN_SOL_00, but at least one process doesn't run correctly:
C:\usr\sap\SOL\SYS\exe\uc\NTI386\sapstart.exe=>sapparam(1c): No Profile used.
somebody can helpme??
thanksI had overcome the problem with the version of java, but now when we reach the phase 40
drops the installation and try to resume, presents the following problem:
sapint.15.log
INFO 2008-12-04 16:42:17
Function interface generated successfully.
INFO 2008-12-04 16:42:17
Technical properties of function set successfully.
INFO 2008-12-04 16:42:17
Information for application function BAPI_SLD_SUPPLIER_CONFIG_SET copied to local Repository.
INFO 2008-12-04 16:42:17
Function module BAPI_SLD_SUPPLIER_CONFIG_SET set successfully.
INFO 2008-12-04 16:42:17
Executing function call BAPI_SLD_SUPPLIER_CONFIG_SET.
INFO 2008-12-04 16:42:28
Function call was successful.
INFO 2008-12-04 16:42:28
RFC connection closed.
ERROR 2008-12-04 16:42:29
FKD-00070 Error when opening table container file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml for writing. Possible reason: "read-only"
sapinst.log
ERROR 2008-12-05 11:35:20
FKD-00049 XML - Parser error: error: no DTD specified, can't validate in line 1, 1
in file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml
sapinst_dev.log
TRACE
Running with toplevel file C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/toplevel.xml
TRACE
Running with dialog file C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/dialog.xml
TRACE
Running with keydb file C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/keydb.xml
ERROR 2008-12-05 11:35:20 [kdxxctaco.cpp:872]
CKdbTableContainerImpl::buildUpKeydbFromXmlFile(iastring,PKdbNameSpaceManager,iXMLDocument&)
FKD-00049 XML - Parser error: error: no DTD specified, can't validate in line 1, 1
in file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml -
64 The specified network name is no longer available
Hi Experts,
We have been using TMG 2010 from last 5 years as a reverse web proxy for OWA , outlook anywhere , active sync etc. Of late users from one particular site have been complaining of regular disconnections on outlook and OWA.
We don't have complaint from any other site except to this , whereas users in this site can browse other secure web sites without any challenge.
I have diagnosed the packets coming from their public IP and i could see that lot of connections happen successfully whereas few it shows either denied connection or failed connection attempt.
if i concentrate on failed connection attempt , i get the below information. Can some one provide any hint on the possible resolution for this issue.
Any help would be much appreciated
Failed Connection Attempt
3/19/2015 1:29:14 PM
<id id="L_LogPane_LogType">Log type:
</id><id id="L_LogPane_WebProxyForward">Web Proxy (Reverse)</id>
<id id="L_LogPane_Status">Status: </id>64 The specified network name is no longer available.
<id id="L_LogPane_Rule">Rule:
</id>Outlook anywhere success rule
<id id="L_LogPane_Source">Source:
</id>External (91.230.41.193:53933)
<id id="L_LogPane_Destination">Destination:
</id>Local Host
<id id="L_LogPane_FilterInfo">Filter information:
</id>Req ID: 19374dc2; Compression: client=No, server=No, compress rate=0% decompress rate=0% ; FBA cookie: exists=no, valid=no, updated=yes, logged off=no, client type=unknown, user activity=yes
<id id="L_LogPane_Protocol">Protocol:
</id>https
<id id="L_LogPane_User">User:
</id>anonymous
Md.Abubakar Noorani IT Systems Engineer Serco Ltd.Hi,
>>64 The specified network name is no longer available
This error is very general. You need to collect a network trace and analyze it. The most common one is when the backend server is performing a dirty TCP connection reset.
You could have a look at the blog below.
Error 64 “ The specified network name is no longer available” while accessing a
HTTPS site through ISA 2006
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
IPhone 5 Battery & Data usage issues
Here's my journey.
I had the iPhone 5 from the day it was realeased. Was with Vodafone Australia. Phone was awesome. Coverage was an issue, so decided to swap to Telstra recently. Got new iPhone 5 with the change over.
From the beginning, the new Iphone on Telstra, the battery was draining completely in less than 3 hours. Looked at the support communities and spoke to Apple. I made the mistake of setting the phone up from a "BackUp". They suggested setting it up as a "new phone" in iTunes.
Did that - phone had been awesome until 4 days ago when I decided to "Update All" of the pending App updates. After all was downloaded the phone returned to its draining self, also becomign VERY VERY HOT when charging. Warmer than normal. Also got a SMS from Telstra to say I have used 82% of my download entitlement. With 22 days remaining!!!! Something wasnt right, not only was it using the battery life, cellular data usage was being drained also.
Spoke to Apple, they told me I would need to do a process of elimination to find the "corrupt" app that was draining the Battery & Data.
I deleted every single App I had on the phone, yet it made no difference. I started to monitor the cellular data recieved on the phone. With no apps and nothing running, how is there data and battery being drained.
Decided yesterday to"RESTORE" iPhone once again. Set up as a new phone. I had loaded my email settings, but nothing else. I hadnt even provided my Apple ID infomation so the App Store wasnt logged in. Phone was still not right. Played with some settings, decided to turn my "Exchange" email from "PUSH" to "Manually Fetch". After this, the phone was back to normal. No cellular data being downloaded and battery OK. Turned Exchanged back to PUSH, then the battery decides to trickle away again.
After all this ********, I have narrowed it down to the way my exhcnage server checks for new messages. I have ALWAYS had my Exchange server PUSH emails to me. Why with this phone, on 6.1 should I have to have it to Manually check for emails.
I get the feeling from conversations with other people, there seems to be alot of unknown data usage which Apple need to make a priority in preventing. This is costing consumers time and money.
Curious if anyone else has had same issue?The issue is pretty broad. I see posts all over the internet on iphone 5. I use the phone on 2 continents and both places have the issue. Therefore, it is not a network issue, it's an Apple issue. I use pccw in Hong Kong and AT&T in the US. I have isolated the issue to the phone sending data, massive amounts of data, all on it's own. At first I tried turning everything off like icloud, itunes, passbook, all downloads, etc. Eventually, I shut everything off other than cellular data. The phone will be fine for some amount of time then it randomly begins sending data. It can send 100mb an hour, with nothing on at all. You can view your send data under settings> general> usage> Cellular usage. I went as far as taking screen shots every minute and watched it sending massive amounts of data. Here they are, just a sample. Apple's suggestion on chat is to turn data off or put it on airplane mode.... quite frustrating since those are the two reasons you buy a smart phone to begin with... I'm hoping there is a solution other than not to use the phone.
-
I'm hoping to pull out certain system values from a windows operating system; xp mainly.
I understand there is bits you can pull out on the fly:
public class Operating
public static void main(String[] args)
String name = "os.name";
String architecture = "os.arch";
String version = "os.version";
String user = "user.name";
System.out.println(System.getProperty(name));
System.out.println(System.getProperty(architecture));
System.out.println(System.getProperty(version));
System.out.println(System.getProperty(user));
System.out.println(System.getenv("COMPUTERNAME"));
System.out.println(System.getenv("HOMEDRIVE"));
}Ideally though I'm trying to pull out a bit more.
Processor & Installed Physical Memory (RAM)
ie:
Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz, 1995 Mhz, 4 Core(s), 4 Logical Processor(s)
4.00GB
So I thought I could try it a bit differently using
Process child = Runtime.getRuntime().exec(command); of msinfo. It has the option to export that into a text file and then scan that in.
It got messy, either the system didn't recognise the command, it is sometimes "msinfo32" or "winmsd" and I got alot of unknown chars.
Anyways, thanks for your patience with the wall of text, is there a better way for me to approach this?
I hope to nail this to apply the same method to the command "tasklist" and possibly "netstat"Eludere wrote:
Just something I'm interested in playing round with, I understand it is relatively simple with other languages. I'm intrigued, there must be a decent way to do this in java, No, not really since Java and all APIs are designed to be platform independent, so it's usually hard to get hold of things that are platform dependent.
trying to wrap my head how.
I had considered using JNI but to be honest never used it.
I'm just trying to work out a java option to do this, considering there are windows commands that pull this information, there must be a way for me to extract from a textfile/dos Yes, as you said in your first post. You can execute the commands, and parse the output, but I don't count that as a decent way.
or go down the registry path.That would also require native code, libraries that are native, or executing native commands. -
Hi,
I have tried to load some data from HR to BW.
For the tables PA0000 and PA0001 i used the BC-solution, and it worked just fine.
Know i would like to be able to extract and load the tables PA0002,PA2001 and PA2006 into BW. There is no BC for these tables, so i have tried to "copy/paste" the function module from the BC-solution(for PA0000/0001), into my own generic solution. This is not popssible because of an unknown field (activation-error) comming from a connected function module.
If i try to do the extract/load in a generic DS without the function module, BW can't find any data in the source ("No data in the source system..")
Any ideas how to extract these 3 tables ??
I am authorized to get the HR data, so authorization should not be an issue.
Regards,
AH
Message was edited by: Haibeh
Message was edited by: Haibehhi,
check this
0HR_PT_2
http://help.sap.com/saphelp_nw04s/helpdata/en/4b/26c5394dbfef35e10000000a11402f/frameset.htm
0HR_PT_3
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/4566377c436c66e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/aa/a7cb390165ad0ce10000000a11402f/frameset.htm
0EMPLOYEE_ID_ATTR
http://help.sap.com/saphelp_nw04s/helpdata/en/8d/c8fa3a4dbdf428e10000000a114084/frameset.htm
0PERSON_ATTR
http://help.sap.com/saphelp_nw04s/helpdata/en/d3/e9b4391de05604e10000000a114084/frameset.htm
Maybe you are looking for
-
Trying to log in hotmail and firefox tells me it can't login 'cause the site is untrusted
I've always logged in hotmail with this browser, now that I've updated it tells me that Firefox can't log-in because the site is untrusted. Come on guys I've never had a problem before what gives here. Are we having the same problem between Firefox &
-
Make List background color transparent
hello all, i want to make my list background color transparent. this is my code:- import mx.styles.CSSStyleDeclaration; _global.styles.List = new CSSStyleDeclaration(); _global.styles.List.setStyle("backgroundColor", "transparent") it is working fine
-
Functional Specification for Travel Request Workflow
Dear All, EHP6 and 7.3 The standard travel request workflow( WS20000050) is not supporting for my business process. So we are developing custom Workflow. I want write Functional specification. Please provide some information to write functional speci
-
Clean up deleted data from cells in workbook
Is there a way to remove the "ghosted" data that is left behind when the delete function is used on cells in a complex workbook with multiple macros?
-
How do I watch disk DVD's on iPad?
I have a few DVD's of my own made using FCP Studio. I have not yet bought an iPad for my wife, she would be more interested if she could watch these on it. Is it possible?