[ALSB] turning on/off logging/tracing for proxy services

Hi all,
do you have any snippet for turning on/off logging/tracing for proxy services using WLST or JMX ?
I've seen a previous thread about Enable/Disable Proxy Service using JMX and I'm looking for something similar.
Regards
ferp

Thanks, but I mean using WLST or JMX code and not by ALSB console
regards
ferp

Similar Messages

Setting geo.enabled to false does not turn it off. Would my Proxy have anything to do with this?

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793677]''
Setting geo.enabled to false does not turn it off. Would my Proxy have anything to do with this?

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793677]''
Setting geo.enabled to false does not turn it off. Would my Proxy have anything to do with this?

Proxy Service giving "Cannot Compute Effective WSDL for: Proxy Service"

Hi,
After updating the wsdl and schema, our proxy service is complaining with error : "Cannot Compute Effective WSDL for: Proxy Service " <ProxyService_Location_Name> when I launch a test console or access the Proxy Endpoint on IE.
Proxy and Business Services are pointing to the same WSDL. From Business Service, I am able to launch the test console. . Before updating the wsdl and schema, it was working fine. We tried to check in JDeveloper to see whether there are any issues with WSDL or Schema, but they are working fine.
Security Settings on Proxy Service are : Basic Authentication, User-Name Token Policy and also applied Transport Access Control. Security worked fine earlier before update.
From log file :
Root cause of ServletException.
java.io.IOException: Can not compute effective WSDL for : ProxyService ********
at com.bea.wli.sb.transports.http.ResourceRequestProcessor.securedInvoke(ResourceRequestProcessor.java:93)
at com.bea.wli.sb.transports.http.ResourceRequestProcessor.process(ResourceRequestProcessor.java:65)
at com.bea.wli.sb.transports.http.generic.RequestHelperBase.handleMetadataRequest(RequestHelperBase.java:181)
at com.bea.wli.sb.transports.http.generic.RequestHelperBase.service(RequestHelperBase.java:83)
at com.bea.wli.sb.transports.http.wls.HttpTransportServlet.service(HttpTransportServlet.java:127)
at weblogic.servlet.FutureResponseServlet.service(FutureResponseServlet.java:24)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
Any suggestions/ideas on why this error is happening is much appreciated.
Thanks,
Srithi

There must be definitely some issue in the Policy Configuration, due to which it is not able to Compute Effective WSDL.
Can you please do the following and capture the logs:
- set the transports debug flag to true in the alsbdebug.xml in your domain directory :
<java:alsb-transports-debug>true</java:alsb-transports-debug>
<java:alsb-service-security-manager-debug>true</java:alsb-service-security-manager-debug>
<java:alsb-service-validation-debug>true</java:alsb-service-validation-debug>
<java:alsb-wspolicy-repository-debug>true</java:alsb-wspolicy-repository-debug>
- set the WLS log level to debug
- Then restart the servers
This should give some additional details on the specific error.
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
https://forums.oracle.com/forums/ann.jspa?annID=893

Runninig 10.6.8 on new iMac. The last wo weeks I keep loosing internet and have to turn airport off and on to restore service. It is not the router as my two laptops do not have this problem. I read that in 2008 MMP's had a similar issue.Any thoughts?

Runninig 10.6.8 on new iMac. The last two weeks I keep loosing internet and have to turn airport off and on to restore service. This happens every time it goes into sleep mode. It is not the router as my two laptops do not have this problem. I read that in 2008 MMP's had a similar issues .Any thoughts?

Go to /Library/Preferences/System Configuration
Move all the files from the System Configuration folder to the Trash.
Restart your Mac. See if that made a difference.

Turn off log level for Individual Users

Hi,
we want to turn off logging level of individual users. We usually go to Identity and click on the user to set log level '0' but we have LDAP security setup so don't have idea how to do it.
Any Ideas
Thxs
SYK

Ok I will try to Set System Variable LOGLEVEL
As we are using LDAP security we will not have users in RPD so i cant set to'0' in rpd.
New Question: Suppose If I am able to set log level to '0' for a user i.e User1 and when he logs into OBIEE and get's a error while running report like say table or view doesn't exist or non of fact table is compatible or number records exceed etc... and Error will show to user as Error Number and says "Please contact System Administrator for more details".
Me considering as Admin if i want to debug that error that User1 is getting from above scenario and when i open nqquery log file will I be able to see the log for that report which User1 is getting error or will it show NO LOGLEVEL Found.
Thxs
SYK

How to turn on / off live updating for all smart playlists at once?

Hello. Is there a way to turn live updating on or off for all my smart playlists at once? That would be a fantastic feature since too many smart playlists with live updating turned on brings iTunes to a crawl.
Currently, I run iTunes on Windows 7. I have over 40,000 songs, and I have hundreds of smart playlists to help organize all my songs and what's on my various iPods at any time. The problem with having so many smart playlists is that iTunes runs very slow. One thing that I do to make iTunes run slightly faster is to turn off live updating for as many smart playlists as I can stand (by going into each one and editing), but then it's hard to tell which have live updating turned on and which don't. As a result, many of my smart playlists don't get updated when I would like them to because I have to go in and manually edit each one again to turn it back on. Maybe showing which have live updating turned on or off would be useful, too?
On a related note, my iPod Classic will actually not work when I sync too many smart playlists. This has been a long-standing problem with iPods, and I'm surprised that it hasn't been fixed yet. I have not experimented to see if it makes any difference if the smart playlists have live updating turned on or off.
Thanks.

this is exactly what i was hoping to see -- but i can't get it to run right on iTunes 12, yosemite
it also doesn't seem to recognize "Home Videos" or "Audiobooks" as special and tries to turn them off -- i modified the earlier script to add those two to the lists of exclusions, but still get the same error message on the first "unspecial/real" smart playlist -- hasn't somethign changed in the object model perhaps?
thank you muchly!
=mjb
tell application "iTunes"
activate
set allPlaylists to (get every user playlist)
repeat with thisPlaylist in allPlaylists
if (thisPlaylist is smart) and name of thisPlaylist is not in {"Music", "Movies", "Podcasts", "Books", "TV Shows", "iTunes U", "Apps", "Ping", "iTunes DJ", "Genius", "Home Videos", "Audiobooks"} then
set view of browser window 1 to thisPlaylist
tell application "System Events"
tell process "iTunes"
tell menu bar 1
tell menu bar item "File"
tell menu "File"
click menu item "Edit Smart Playlist"
end tell
end tell
end tell
set theCheckbox to checkbox "Live updating" of window 1
tell theCheckbox
if (its value as boolean) then click theCheckbox
end tell
click button "OK" of window 1
end tell
end tell
end if
end repeat
end tell

HP 6500n asking for proxy service everytime i enable Webservices

I have configured my HP 6500+ for network and i can print from my computer onto this printer without any issues using the network connection.
I have been trying to enable the webservices but it always keeps on asking me for proxy. I am in a home network with no proxy enabled. I can browse my internet with no issues.
Anybody have any idea how can i resolve this issue. I have rebooted the printer, tried resetting the printer back to defaults, have done semireset ... but no help

If the steps given in the above post does not work, try these:
1) First contact your ISP and get the DNS IP address details
2) Print HP Network Configuration Page from the printer menu (Setup ==> Network ) and make note of printer IP.
3) Open Internet Explorer browser and type the printer IP in the address bar and press Enter key.
4) click on Network tab and click on Wired/Wireless. If printer is connected in Wireless, click on Wireless
5) Goto Advance configuration tab
6) Select Manual IP and enter the details. Same as it as from HP Network Configuration Page
7) Select Manual DNS and enter the details which ur ISP provided
8) Click Apply and save the settings and waitfor 2 min.
9) Turn OFF and turn ON the printer
10) Enable the WebServices
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Reset the HTTP response code in OSB for proxy service

Hi,
I created a HTTP proxy service in ALSB with any XML message option. There are some business scnearios for which i need to send a custom error message in the HTTP body. I am replacing the $body variable with the error message and sending reply with success.As i am using reply with success it sends a HTTP response status code as 200 Ok.
However based on different error conditions i want to send appropraite http response code. How can this be achieved?

I would like to share the solution so that it would be useful to all the users of the forum.
There is a http:http-response-code element in the $inbound variable which is optional element. You need to insert this element to the $inbound using the insert action. Here is the extract of the code:
Insert [<http:http-response-code>401</http:http-response-code>] [ as last child of ] [./con:transport/con:response] in [inbound]
Please note namespace con belongs to "http://www.bea.com/wli/sb/context".
Edited by: [email protected] on Aug 12, 2009 10:47 PM

HTTP Basic authentication for proxy service and its wsdl?

Hello:
For some reasons I needed to configure the HTTP basic authentication on a proxy service at OSB 11g. Everything was OK until I realized that, additionally to the authentication when calling the service, the OSB also asks for credentials when I try to get that proxy wsdl file.
My requirements are to secure the proxy service when is called only, not when retrieving the wsdl.
Is this possible to configure on OSB / WLS? How?
Greetings!
Edited by: user4483647 on 02-sep-2010 12:59
Edited by: user4483647 on 02-sep-2010 13:25

If I'm not wrong, Basic authentication is Transport level feature. So passing User/Password in SOAPHeader doesn't make sense. SOAP message can only be sent when you have a HTTP Connection open. During opening of HTTP connection User/Password is required for basic authentication.
http://www.student.nada.kth.se/~d95-cro/j2eetutorial14/doc/Security7.html#wp156943
Edited by: mneelapu on Apr 2, 2009 2:09 PM

Which service type to use for Proxy Service

I have a question regarding a Proxy service.
I have a need for a local (transport local) Proxy service which is called by another proxy service.
It is a synchronous service which has an XML incoming message and an XML outgoing message.
I have the following questions:
- Does it make a difference in performance when I choose a WSDL webservice or a Messaging service?
- Which one would you choose and why?
Thanx

Does it make a difference in performance when I choose a WSDL webservice or a Messaging service?Hardly there would be any difference.
Which one would you choose and why?I would choose XML type messaging type proxy because input and output are XML messages. I won't choose WSDL web-service because it should be used in case of SOAP packagaing only (in web-service context, to enable SOAP and WS support) to mock a web-service which has a WSDL (and a XSD) associated with it.
Regards,
Anuj

Portal Activirty Reporting and logs tracing for user activities

We operate under a WAS JAVA 6.40 SP19 environment portal...
Can the portal generate reports base on users activities can the portal report on users login attempts with any of the followings:
Login attempts by numbers of tries
Login attempts by date
Login attempts by fail or unsuccessful
Login attempts by successful
We currently are tracing SSO attempts into the ECC systems but we would like to report from a portal end perspective

Hi,
Hope this link helps.
http://help.sap.com/saphelp_nw04s/helpdata/en/58/728ea01cf64fff996b827f2a06f9b1/frameset.htm
Blog: /people/daniel.wroblewski/blog/2007/09/09/fixes-available-for-portal-activity-report
Thanks,
Tanuj

My Iphone Off/On push button is apparently stuck. I am unable to turn it off or push for the black screensaver. Is there a mechanical fix or am I sunk with a defective phone now?

question: Is my IPhone 4S now defective/defunct for use with a bad push button for on/off and screensaver, or is there a mechanical fix that an Apple Store Genius can do to pop that button out again?

Oh, yes, the Apple store will either install that cheesy, annoying screen app, or tell me I can replace my phone - only 1 1/2 years old - come on, Apple! - for a hefty price since the warranty is over and my cell contract still has months to go. Oh, and I've purchased AppleCare several times on other products and never needed it because I am careful with my electronics! Apple has gotten enough money from me for AppleCare in the past, and why would I have expected Apple to have a shoddy product (well, I might now). Thanks for responding, though.

Bug: export WSDL for proxy service

done under workshop 10.3, rightclick on proxy, then osb/export wsdl contains the wrong location (in my case port 7001 instead of 8001)
done with service bus web console the location is alright.
please report and fix this.
anyway does it belong to here or the workshop or soa forum? I feel free to xpost.
the whole export is annoying because it goes to a zip. why would i want to zip a single wsdl file.
thanks you for you attention,
Barossa

There must be definitely some issue in the Policy Configuration, due to which it is not able to Compute Effective WSDL.
Can you please do the following and capture the logs:
- set the transports debug flag to true in the alsbdebug.xml in your domain directory :
<java:alsb-transports-debug>true</java:alsb-transports-debug>
<java:alsb-service-security-manager-debug>true</java:alsb-service-security-manager-debug>
<java:alsb-service-validation-debug>true</java:alsb-service-validation-debug>
<java:alsb-wspolicy-repository-debug>true</java:alsb-wspolicy-repository-debug>
- set the WLS log level to debug
- Then restart the servers
This should give some additional details on the specific error.
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
https://forums.oracle.com/forums/ann.jspa?annID=893

Log Entries for Terminal Services in Event Viewer?

Hello
I wasn't sure exactly where to post this. Answers.microsoft.com directed me here for an answer.
I'm running Windows 7 Professional 32 bit. It's a standalone PC, not joined to a domain, never configured as a server. I'm puzzled. When I review entries in the Event Viewer, all logon and logoff entries are located in Event Viewer/Applications and Services
Logs/Microsoft/ Windows/Terminal Server/Local Session Manager/Operational. Every logon/logoff event is recorded here, although I have always had Remote Desktop Services disabled in Services. I would think that logon/logoff events would be recorded in
Applications and Services Logs/Microsoft/Windows/Winlogon. That makes more sense to me. Some of these user entries have Address: LOCAL and some are blank. No major hardware or software changes that might have caused this. The Event Viewer only goes back
6 months (1 Mb) and then it's overwritten. Can anyone explain this to me? Thanks for your help.

Hi,
The path of Event Viewer/Applications and Services Logs/Microsoft/ Windows/Terminal Server/Local Session Manager is used to record Remote Desktop Services activity even through it's disabled.
Windows logon and logoff activity is recorded in another path: Windows Logs/Security.
Karen Hu
TechNet Community Support

IOS static destination Port NAT for Proxy-Service

HTTP Internet-traffic (tcp 80) from Clients connected to interface1 (10.0.0.0/8) sould be transfered/ scaned via Proxy-Server(192.168.0.1) on interface2 which acts on Port tcp 8080.
HTTP Traffic form the clients is routed via PBR to the Proxy.
But I don`t know how to nat the detination-port from the clients (tcp 80) to the service-port used by proxy (8080) WITHOUT natting the original source- and destination-address.

object network nec1100_cpu
host 192.168.0.201
nat (inside,outside) static my-public-IP service udp 5060, 5080 5081
Or you can also do this in the same way.
object network nec1100_cpu
host 192.168.0.201
nat (inside,outside) static my-public-IP
Control udp port via the ACL on the outside interface.
Hope this helps.
thanks
Rizwan Rafeek

[ALSB] turning on/off logging/tracing for proxy services

Similar Messages

Maybe you are looking for