Alternative for integrating Portal to Sap Webwas 6.20 (without ITS)

Hello
I have a scenario which I should open SAP Transactions from Uwl tasks in Portal, without ITS (as sap Webwas doesnt have embedded ITS).
I get the following error:
iView : pcd:portal_content/every_user/general/uwl/com.sap.netweaver.bc.uwl.uwlSapLaunch
Nome de componente : com.sap.portal.appintegrator.sap.Transaction
Exception in SAP Application Integrator occured: Application URL ':///sap(ZT01VUxMbEJHNHpWWUIzVyUyQjRZWm5lWnclM0QlM0R1NjYlMkZzcklXQ3Z4WXJPV3g5OXVvVnclM0QlM0Q=)/bc/gui/sap/its/webgui' is not valid! Please check the protocol and host entries for system 'R3_SYSTEM'..
Is there any alternative for accessing the SAP Transactions in UWL without ITS?
I tried to change the Uwl XML to call a custom view, but nothing has changed, the result is the same. I changed from:
    <ItemType name="uwl.task.webflow.TS01000096.R3_SYSTEM" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchSAPAction" executionMode="default">
      <ItemTypeCriteria systemId="R3_SYSTEM" externalType="TS01000096" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchSAPAction" groupAction="" handler="SAPIACLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
            <Property name="IAC" value="WS01000060"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
To:
          <ItemType name="uwl.task.webflow.TS90300030.R3_SYSTEM" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchIView" executionMode="default">
               <ItemTypeCriteria systemId="R3_SYSTEM" externalType="TS90300030" connector="WebFlowConnector"/>
               <Actions>
                    <Action name="launchIView" handler="IViewLauncher">
                         <Properties>
                              <Property name="iview" value="pcd:portal_content/myISRDispatcher"/>
                              <Property name="openInNewWindow" value="yes"/>
                         </Properties>
                         <Descriptions default="launchIView"/>
                    </Action>
               </Actions>
          </ItemType>
Thanks

Hi Vitor,
This is not possible.
If you want to call backend transactions you will need to use the ITS: ITS 6.20 for backend releases with kernel 6.20 (and lower) or the Integrated ITS with kernel >= 6.40. SAP notes 709038 and 325616 can give you more information.
Best regards,
Cristiano

Similar Messages

Alternative for integration process ?

The XI integration process functionality for me looks like another example of overkill design in XI. Needs lots of additional abstract message interface declarations, difficult to follow what really happens.
Question: what alternatives in XI are possible without breaking the architecure completely ? E.g. when I have to perform some simple connected steps, like call an RFC, then load a file via FTP, then send out an email with the result data. Where in XI could I define a Java or ABAP method which does that programmatically ? The communication channels have some module processors. Would that be the right place ( define a module processor in channel which receives the trigger). Are there standard functions in XI available in Java or ABAP to perform RFC, FTP...
or is it better to do it in a Java or ABAP mapping ? This does not seem to make much sense.
Any experiences or ideas ?
CSY

hi,
the complete lauch of xi is to have common place for all designed interfaces and configuration and monitoring stuffs.
client b4r getting in to xi should read his landscape and justify whether to bring in xi r not, when this step is not done, questions as mentioned above would arise around
what is the need of xi for simple function which i can do by abap , java , jco s etc..(many ask ))
but beauty of xi is tapped when the landscape around it is growing and when u want to intergrate those all systems.
i guess it's better to have xi standard congf instead peeping in to other hindden programs to do same , as it would be easily visible to all developer who come in .
IP is the class idea and u shud think if u r flow has more logic in between to be manipulated.
In in the end the moral is that every system is capable of meeting the requirment we shud be in search of which can be trusted and maitained easily as a long run ) everything is possible.
rgds
srini
Edited by: Venkateswarlu Srinivas on Jul 9, 2008 3:19 PM

Approaches for Integration of non-SAP Systems in CE

Hello!
Sorry for this theoretical question but it is important fo me to know:
Is the use of Webservices the only way to integrate non-SAP Systems in a Process desinged with Netweaver BPM or are the other ways too? If yes, which are they? Is CE only designed for consuming Webservices?
Thank you all for your help.
Regards,
Oliver

Or you have to use PI.

Integration Primavera with SAP

Dear Experts,
What are the pros & cons, If we integrate SAP with Primavera.
Which is the best recommended software by SAP to integrate .
Any extra manpower required for interface or any new developments required in this case in sap.
How much its cost to integrate.
How it works, online or offline.
Regards,
Santosh Kumar

Hi,
There are so many software's available in the market and certified by SAP for Integration Primavera with SAP.
If you want to develop your own interface between SAP and Primavera,it is tedious and time consuming so better is to go for a ready made software certified by SAP which will ease you work.
Muzamil

What technical components are needed for integration of SAP BI and BO?

Hello,
What technical components are needed for integration of SAP BI and BO?

Hi,
you need to setup a BOBJ server (eg. BusinessObjects Enterprise XI 3.1 or BO Edge 3.1) and then install the BusinessObjects integration Kit for SAP on the same machine your BOBJ server runs.
In order to build reports you can either use Crystal Reports (eg Install Crystal Report Designer 2008 V1 if you have an XI 3.1 server installed), WebIntelligence (Install the Business Objects XI 3.1 Client Tools in order to be able to build universes), BusinessObjects Voyager or XCelsius. Please note that you have to always install the BOBJ integration Kit for SAP (should be the same version as your server and client installation) on your clients AFTER you installed one or more of the above client tools.
Please take again a look at the following link for more detailed information (from Ingo) on this:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
Regards,
Stratos

Step by Step procedure for Integration of B0 with BI 7.0, Portal

Hi,
My key concerns include integration with SAP Portal, which I did not find in instalaltion guide.
Please advice on step by by Procedure for BO with BI 7.0 starting with the right version of BO to be installed.
1. Which version compatible with BI 7.0 SP 12, LATER TO BE UPGRADED TO sp 16
2. Source of data will be BI and reports will be using BO.
3. What are components to be installed
4. Prerequisites for Integration with BI AND SAP Portal.
5.Steps for Integration with BI 7.0
6. Steps for Integration with SAP Portal- Where to get the sample iviews. What to do for connction between Portal and BO - this i didnt find in installation guide
Thanks,
Harish

HI,
here the items:
SAP Side:
- all machines have to be in the same domain
- BI has to trust the portal
- BI has to accept SSO tickets
- EP has to generate SSO tickets
BusinessObjects:
- SAP Authentication has to be configured
- BI system should be configured has default system in the options of the SAP authentication
- authentication.default parameter in the web.xml for InfoView has to be set to secSAPR3
- BusinessObjects has to be in the same domain
EP side:
- in the system landscape configure the Crystal Enterprise Server Properties for your BI system
- import the portal iview template that is part of the SAP Integration Kit
- create a new iView
Ingo

Missing beans for BI/Portal integration configuration

I've configured BI/Portal configuration but when executing the tests or when using BEX I have an errors:
com.sap.engine.services.rfcengine.RFCException: Bean RSWR_TEMPLATE_PROCESS_PROXY not found
Caused by: .jndi.exceptions.NameNotFoundException: Object not found in lookup of RSWR_TEMPLATE_PROCESS_PROXY.
same error for other RSWR beans (RSWR_RFC_SERVICE_TEST etc.).
It seems I am missing some component(s), in my installation (the SSO, auth, etc seems configured correctly according the configuration guides).
Does anybody knows what component I should re-deploy in order to have missing beans? Any other possibility to fix this error?
Thanks,
Evgeni.

Which versions of EP and BW are you using?
The attached link provides steps for EP BW integration.
http://help.sap.com/saphelp_nw04/helpdata/en/60/1c0340dcf41e07e10000000a1550b0/content.htm

Integration of ESS Portal and SAP

Hi,
Project Systems report RPSISKB000 - Capacity Requirements Overview (t-code CN50N) is a report works correctly when analyzing time that was entered via the R/3 GUI in transaction CAT2 u2013 Time Sheet: Maintain Times. However, when executing against time entered via Employee Self Service (ESS) Time Sheet Entry, the u201CActual Worku201D hours are not pulling through to the report.
I believe this is because when time is entered via ESS Time Sheet Entry the fields Capacity ID (KAPID) and Split Number (SPLIT) in table CATSDB are not populated. These two fields are populated when time is entered via the R/3 GUI in transaction CAT2.
I need how to populate these two fields when time is entered via ESS. How data flows from ESS Portal to SAP.
How SAP and ESS Portal integrated for data flow in between.
Thanks,
Suresh

You have to ensure that these fields in The CATS profile are set as input in CAC2 ie fields should be input and not is display
Please check it
Implement Note 1385803

Standered business package for BI reports with SAP EP Integration

Hi Friends,
I want to know is there any standered business package for integrating BI content with SAP enterprise portal.As i heard the business package come up with predefined iview and which can be customized as per our requirement .
I have worked on Cognos business package in my previous project .but current requirement is i need to dispay the BI Reports strucuture in Portal as folder heirachy with Icons.
I am using BI and EP portal version as 7.0.
please share the package name ASAP.
Regards
Ratnakar

closed
Edited by: ratnakar reddy alwala on Oct 3, 2008 11:46 AM

What is the alternative for SU53 in Portal

Hi,
While using EHS classic version, we can use SU53 to know about any permission issue etc. However what can be done if we face some permission issue while using Portal application like SuPM or EC or SAP EHMS. Is there any alternative for SU53 in portal application?
Regards,
Sambit Kumar Routray

Dear Sambit
may be check:
http://searchsap.techtarget.com/tip/BAPI-to-retrieve-Check-Values-like-SU53-result
May be as well these link might be good starting option:
Enhanced SU53 now available
Find the missing Authorisation Object in the WE... | SCN
C.B.

"Step for step" configuration of SAP NetWeaver portal (2004s)

Hello,
is somewhere a plan or the proceeding - like "step for step" configuration of SAP NetWeaver portal (2004s)? I adapted now the Design of the portal. What is to be made at next - role concept, integration of transactions, or something else?
Thank you for their assistance.
Regards,
Galyna

Hi,
Refer the following links for some good documents
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1236a490-0201-0010-31a2-a08f5706d54f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/410ea290-0201-0010-748d-9738e5792a9b
http://help.sap.com/saphelp_nw04/helpdata/en/0f/163c405865e801e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0407c890-0201-0010-4684-e22d7c3da113
https://www.sdn.sap.com/irj/sdn/wiki
Regards,
Tamil K

Requirements for integration of XYZ Service - SAP.

Hi Team,
Appriciate any help on understanding the below requirement and how/where to start work in XI.
Requirements for integration of XYZ Service - SAP.
XYZ Service has CRM middle where and SAP ECC 6.0
XYZ Service Calls
=============
1. All the completed calls in XYZ Service has to go in SAP automatically for validation process.
2. All call details (parameters) has to come in sap from XYZ Service to SAP like..
     Field Name:
     =========
     Per No.
     official no.
     mohile no.
     Cust Name.
     Address.
     etc.
3. All the AMC generated in XYZ Service should replicate to SAP, with all the customers, AMC and product details.
Validation in SAP:
==============
4. In SAP we have to validate the calls according to below parameters.
    --> date of purchase : abc validation
    --> Serial No. :   Should be n fixed lenght with some format
    --> Part & Qty. : Same part should not have been consumed in last 30 days in same unit.
    -->
    -->
    etc.
Process in SAP
============
5. All the calls which carry the spare parts has to approve by the store person. He can approve/disapprove the call.
6. Call without spare part have to approve by system once validation process finish and it will considerin qlt report in sap.
7. If the store peroson disapproves tthe call it has to go back XYZ Service and reprocess again.
8. Prepare quality report for all the calls in SAP.
9. Consumption report has generate for each call wise.
10. Call wisw defective settlement( replenishment) in SAP and generate automatic loan settlement.
11. Franchisee bill claim to SAP.
12. ASC can change the disapproved calls and reprocess it again.
As for my understanding and discussions from the above requiremet,
Customer/franchisee/client....enters the request/data through the Web Application .
process from CRM and then to SAP ECC 6.0. after all the process complete details to be shown on Web Applications.
So here where exactly supposed ti implemet the XI system and little bit of confuse how and where to start from.
Please guide me to start the above mentioned and give me a break to learn and do lot of things in XI/PI.
Regards,
Ramana.

Thank you Gaurav.
However, as for my understanding...as the client using a legacy system for getting the information.
also The data is given on Web Application ( say via portal) and the data verified from CRM system and then processed via SAP ECC 6.0 giving the required information on the Wb Application to the client (Portal)
That means needto implement XI integration to show the complete required information on the web application.
Only this is I am not knowing how to frame this complete design and where and how exactly to stat.
Please correct me if I am wrong and if possible with the same relavent information.
Thank you for your valuable support.
Regards,
Venkat,

SAP CRM integration to non sap Portal

Hi all,
my customer asks me the following questions. Could please help me to better understand his doubles ?
1. Do the iViews necessarily have to run in environment SAP EP to be visualized in WSP or they can directly be performed in WSP ?
2. The customer would like to integrate websphere portal to SAP CRM with an elevate security. At the moment our idea is to integrate using "redirect" by URL but this is not very compliant with their security standards. Have you please an other idea ?
Sorry for the

Have you tried looking at the iView Portlet Builder portlet in the Portal Catalog? Here's a URL to the iView Portlet Builder:
http://catalog.lotus.com/wps/portal/!ut/p/kcxml/04_Sj9SPykssy0xPLMnMz0vMAfIjzeMN4t1N9KNyUtMTkyv1Q_P0w3ITKzJzM6tSU_Qj9KPMgPKWLiCdIJaxqX4kqogjXMDXIz83VT9Y31s_QL8gJ6vK28fEEQC5CEwL/delta/base64xml/L0lJSk03dWlDU1lKSkpKQSEvb013d0FBQVlnQUNFSVFoQ0VFSWhGS0lZd0EhIS80RkdnZFluS0owRlJvWGZyQ0c4MDNZUSEvN18wX0c0LzM3NTU2OC9zYS5kZXRhaWxzQWN0aW9u?PC_7_0_G4_item=1WP10004D#7_0_G4

Business Package for SAP Best Practices for Enterprise Portal

Hi,
We are implementing EP for ECC 5.0 and we have to web enable some FI transactions like FB50/fb60 etc. We want to use standard business package for this. The only business package that caters this requirement is "Business Package for SAP Best Practices for Enterprise Portal 60.1". When i checked the data source for this business package, the specification is for "SAP R/3 4.6B and above". Does this work for ECC 5.0 as well? In general does the R/3 specific business packages work for ECC versions? Please let me know. Thanks for the help. I promise rewards.
Regards
Hari

Hari,
When you download the BPO via Portal Content Portfolio,
each bpo has additional information on the release.
For example for the one you are inquiring about - Business Package for SAP Best Practices for Enterprise Portal, the additional release information is provided on the following links;
https://www2.iviewstudio.com/sdn/info/index.cfm?action=faqs&part=#QSR03
https://www2.iviewstudio.com/sdn/detail_view/index.cfm?action=package_information&CatalogSet=SAP%20Content&ItemID=17212&CFID=7544845&CFTOKEN=99283970
Regards,
James

Integration for Business Workflow and SAP Interactive forms by Adobe

Hi
Is any of you able to watch the following SDN eLearning Session ?
<i>Integration for Business Workflow and SAP Interactive forms by Adobe (RIG session 7)</i>
I can play nearly all the other eBooks, but not this one. Any idea ???
Regards, bernhard

I solved the problem.
It is not possible to view the ebook with IE 7.0. So I removed the new Internet Explorer and everythink is working fine.
Greetings, Bernhard

Alternative for integrating Portal to Sap Webwas 6.20 (without ITS)

Similar Messages

Maybe you are looking for