ALV Filter Selection w/ error "WBS element 0000000000000000 does not exist"

Hello,
In a few ALV reports, we have WBS Element column showed in ALV list and WBS Element defined as type BSEG-PROJK, which has conversion routine ABPSP.
When WBS Element is used for ALV list Filter, in Selection screen, error message "WBS element 0000000000000000 does not exist" is pop up as we hit Enter key or click on u201CSelection optionsu201D button with no value entered in Input fields.
We get same error even after we enter an existing WBS Element in Low selection input field and hit Enter key.
Itu2019s ok if we enter existing WBS Element value in both Low and High selection input fields.
We know we have workaround by entering both Low and High input field, and we can fix ALV reports by using character based WBS Element, such as PRPS-POSKI.
BUT, as users told me, they donu2019t have this problem before and it just happened. We checked the recent Transports and couldnu2019t see anything relevant.
Could any of you let me know if you have any clue or if thereu2019s any other way to fix it besides changing report by report.
Thank you.
SL

Similar Messages

OTL Error - Hrs - Element link does not exist for the duration of the entry

Hi,
We had a few new people start just before xmas however when the person entering their record did it, they didn't date-track the additional assignment time information record to the start of the week (they did however correctly date-track their employee and assignment record) so when the timecard was filled in errors were thrown up.
Since then I have gone back into the employees assignment time record, purged it and then re-created it effective from the week beginning.
However when we try to enter time for them now using delegated self service, the following error is shown for the two days which were originally excluded from the date-tracked record:
Hrs - Element link does not exist for the duration of the entry Cause: The link has been purged or date effectively deleted. Action: Check the effective start and end dates on the link definitions for this element. The original record should have been created from the 19th dec 2009 however was done from the 23rd by accident. I have since been in and replaced it with a record effective from the 19th.
I have re-run the security list generation (we are using static list).
The only thing I can find on metalink is 372086.1 which doesn't really describe the problem or help!!
The people don't appear in the timekeeper form though which is strange. I really can't see any reason why their record isn't valid - no data is missing. Do I need to run a job to update the information or something?
We are using 11.5.10.2
Thankss

Well would you believe it!? After much late night meddling around, I noticed one employee worked! There was absolutely no difference in any settings between his record and a persons who did not work. So I went into another employees record, changed his name and saved (correcting). Tried again and he worked fine! So, just by changing the employee name it seems to have worked for self service! I still cannot see them in timekeeper which is worrying however at least we can get time in for them now!
If anyone knows why I may not be able to see them in timekeeper (even using an un-secured responsibility) then that would be a great help! :)

Container element 'ADDRESSSTRINGS' does not exists

Dear all,
I am trying to define expression for recipient type
it gives me error
container element 'ADDRESSSTRINGS' does not exists
container element 'EXPRESS' does not exists
container element 'TYPEID' does not exists
Can you please share the technical detail of these parameters
or is there some other problem
Best of regards,
Gaurav

Hi Gaurav,
These are the standard task container's for the send mail step type.
No need create these container's and already they are available in the Task container.
Have you used the standard task to send the mail? If so just double click the Task ID and you can find these container's under the Container Tab.
Just delete the send mail step and create a new one. It will solve the issue.
Thanks,
Viji.

Container element 'NODEOBJECT' does not exist

Dear Gurrus,
While creating clarification case category i am having this error "Container element 'NODEOBJECT' does not exist" .
kindly help me out in resolving these issue.
Regards,

Hi,
I think you need to check Note 1082707 - Error message 'Container element ... does not exist'
Symptom
You have created a container element manually in a case category and you are trying to define the dataflow but in the binding editor you are receiving error message SWF_EXP_001 035 'Container element ... does not exist'.
Other terms
FP-EMMA, BPEM, EMMACCAT2
Reason and Prerequisites
The problem only occurs if you create an invalid container element that contains one or more spaces in the element name.
Solution
Choose a valid element name that starts with a letter and contains only characters, numbers, or underscores. The following correction does insure this.
See the full note if it can be of help.
regards,
David

API error: Element link does not exist for the duration of the entry

I am trying to create an element using the API_PAY_ELEMENT_ENTRY.CREATE_ELEMENT_ENTRY API
While I am able to create many elements for years this way, for one particular non-recurring element I get the following error
ORA-20001: Element link does not exist for the duration of the entry
Cause: The link has been purged or date effectively deleted.
Action: Check the effective start and end dates on the link definitions for this element.
I have checked evertything and the Link is defined far before my element entry starts and with no end date. The assignment I want to attach this element entry is perfectly eligible.
The weirdest is that I am able to create this element entry with the values I want and the dates I want through standard User interface...
Any idea?
Message was edited by:
briard

Here are the parameters I use in my call.
DECLARE
L_EFFECTIVE_START_DATE DATE;
L_EFFECTIVE_END_DATE DATE;
L_ELEMENT_ENTRY_ID NUMBER;
L_OBJECT_VERSION_NUMBER NUMBER;
L_WARNING BOOLEAN;
BEGIN
APPS.PAY_ELEMENT_ENTRY_API.CREATE_ELEMENT_ENTRY(
P_EFFECTIVE_DATE => TO_DATE('01-JUL-2008','DD-MON-YYYY'),
P_BUSINESS_GROUP_ID => 1,
P_ASSIGNMENT_ID => 122147
P_ELEMENT_LINK_ID => 233,
P_ENTRY_TYPE => 'E',
P_INPUT_VALUE_ID1 => 313,
P_ENTRY_VALUE1 => 'T',
P_INPUT_VALUE_ID2 => 314,
P_ENTRY_VALUE2 => '5',
-- out params
P_EFFECTIVE_START_DATE => L_EFFECTIVE_START_DATE,
P_EFFECTIVE_END_DATE => L_EFFECTIVE_END_DATE,
P_ELEMENT_ENTRY_ID => L_ELEMENT_ENTRY_ID,
P_OBJECT_VERSION_NUMBER => L_OBJECT_VERSION_NUMBER,
P_CREATE_WARNING => L_WARNING);
END;
François

Error: The preference path does not exist

Subject:
Error: The preference path does not exist:
Oracle.Portal.Page(WWC-51000)]
I can not resolve this error.
Have you already experienced this error?
I'm sending more information below.
Regards, Dime
DETAILS:
========
ORACLE Product: iAS 9i EE, v1.0.2
Platform: RedHat Linox 6.2, kernel 2.2.18
HW Platform:
IBM Intellistation 6889, Intel P2 350MHz, 384MB
Problem:
After successful installation of the Application Server and data base creation, the installation of ORACLE Portal 3.0.6 is successful too, but the following message
appears when we try to access the URL http://servername:port/pls/portal30:
Error: The preference path does not exist:
Oracle.Portal.Page (WWC-51000)
About the Attachments:
- init.ora.original (the original init.ora file)
- init.ora.try1 (the file modified as described in the configuration guide)
- init.ora.try2 (according suggestions in the discussion group on
the ORACLE Metal Partners Site)
- install.log (install.log generated with init.ora.try2)
Regards,
Dimitar Indovski,
GORD Systems
ATTACHMENT-1 (init.ora.original)
db_name=DEFAULT
db_files= 80 # SMALL
db_file_multiblock_read_count = 8 # SMALL
db_block_buffers = 100 # SMALL
shared_pool_size = 3500000 # SMALL
log_checkpoint_interval = 10000
processes = 50 # SMALL
parallel_max_servers = 5 # SMALL
log_buffer = 32768 # SMALL
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
global_names = TRUE
control_files = (ora_control1, ora_control2)
ATTACHMENT-2 (init.ora.try1)
db_name=DEFAULT
db_files = 80 # SMALL
db_file_multiblock_read_count = 8 # SMALL
db_block_buffers = 100 # SMALL
shared_pool_size = 3500000 # SMALL
log_checkpoint_interval = 10000
processes = 50 # SMALL
parallel_max_servers = 5 # SMALL
log_buffer = 32768 # SMALL
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
global_names = TRUE
control_files = (ora_control1, ora_control2)
max_enabled_roles = 25
open_cursors = 50
compatible = 8.1.0
java_pool_size = 20
ATTACHMENT-3 (init.ora.try2)
db_name=DEFAULT
db_file_multiblock_read_count = 16
db_block_buffers = 550
shared_pool_size = 31457280
log_checkpoint_interval = 10000
processes = 100
parallel_max_servers = 5
log_buffer = 32768
max_dump_file_size = 10240
global_names = TRUE
control_files = (ora_control1, ora_control2)
open_cursors = 300
large_pool_size = 45000000
java_pool_size = 32768000
db_block_size = 8192
ATTACHMENT-4 (install.log.gz)
-----------------------------

Dennis
A general shared_pool_size Q&A is part of the Troubleshooting Guide on OTN: http://technet.oracle.com/products/iportal/htdocs/portal_troubleshooting.htm
The Configuration Assistant determines the shared pool size from the view v$parameter,
which lists information about the initialization parameters (populated from init.ora file). If the shared_pool_size value is more than 15728640 (for a default installation), you pass the minimal requirements set by the Portal Installer. Make sure you actually write out all the digits (i.e. 1000000000) and don't use abbreviations (1000M). Currently, the Configuration Assistant does a numeric check against the values that are set and cannot resolve the abbreviate syntax.
Also try running the sql [select value from v$parameter where name like 'shared_pool_size';] to check if the changes you are making in the init.ora is really getting populated in the v$parameter view. As long as you restart the database once you make the change in init.ora, it should take effect.
null

T-code kbk6 (actual posting price) error " Layout 1-N01 does not exist. "

i tried to see t-code kbk6 (actual posting - actual price)
it's have error Layout 1-N01 does not exist. full error message i show you below.
how should i do. i tried to create 1-N01 in KP65 (create planning layouts for cost element planning)
i got error message You chose a name in a reserved name range -> Choose another name
what should i do ?
please help.
Layout 1-N01 does not exist.
Message no. K9151
Diagnosis
Planning layout 1-N01 entered by you or set by the planner profile does not exist in the current client.
This can have the following causes:
The planning layout has not yet been created in Customizing.
The planning layout is a layout delivered by SAP that has not yet been imported into the client to which you have logged on.
SAP planning layouts begin with a number, user-defined planning layouts do not.
Procedure
If you require the user-defined planning layout 1-N01, you must first create it in Customzing.
If planning layout 1-N01 is a layout delivered by SAP, you must first import this from client 000 in Customizing.
a) For layouts from General Controlling, choose Controlling -> General Controlling -> Production Start-Up Preparation -> Transport System Settings -> Transport Settings for Planning -> Import Standard Planning Layouts.
b) For layouts from Profit Center Accounting, choose Enterprise Controlling -> Profit Center Accounting -> Tools -> Transport Customizing Settings -> Transport Settings for Planning -> Import Planning Layouts.

Hi
The solution is outlined in the long text of the error, you need to import 1-N01 from client 000.
To import the Standard Planning Layout 1-N01 from Client 000 use transaction code OKBF. The menu path is SPRO - Controlling - General Controlling - Production Start Up Preparation - Transport Settings for Planning - Import Standard Planning Layouts.
Find the layout and execute the import. This should resolve the error.
Elaine

Oracle Text Index Error - DRG-10700: preference does not exist: CTXSYS.DEFA

Hi we are having a Oracle 11g db.And we have installed CTX SYS package and provided the grants to the required schema.
But while creating the oracle text index, following error is thrown:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: CTXSYS.DEFAULT_LEXER
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 365
Following grnats are given :
GRANT EXECUTE ON CTXSYS.CTX_DDL TO <schema_name>;
GRANT APPOWN TO <schema_name>;
GRANT CTXAPP TO <schema_name>;
I have verifyed the ctxsys.CTX_PREFERENCES view which is having an entry as :
SELECT PRE_OWNER, PRE_NAME
FROM CTXSYS.CTX_PREFERENCES
WHERE PRE_NAME = 'DEFAULT_LEXER';
The Result is :
PRE_OWNER     PRE_NAME
SYS     DEFAULT_LEXER
Can you please assist if there is a way to update the permission on this DEFAULT_LEXER preference to set the PRE_OWNER as CTXSYS ?
Thanks

That's odd. If I run the same query I see:
SQL> SELECT PRE_OWNER, PRE_NAME
2 FROM CTXSYS.CTX_PREFERENCES
3 WHERE PRE_NAME = 'DEFAULT_LEXER';
PRE_OWNER                      PRE_NAME
CTXSYS                         DEFAULT_LEXERAre all your defaults like thsi? What do you see if you run
select pre_owner, pre_name from ctxsys.ctx_preferences where pre_name like 'DEFAULT%';
It would be easy enough to update the underlying table DR$PREFERENCES to fix the owner, but who knows what else might be wrong.
Has this database been updated from a 9i installation by any chance?

Java communication error - RFC destination NOT_CONFIGURED does not exist

Hello,
We are facing problem when sending reports(BEx Quert) through broadcasting to the users. We are getting the error "Java communication error RFC destination NOT_CONFIGURED does not exist" in the Log Display (Tcode: RSRD_ADMIN).
In the broadcasting setting, if we select variable values in the tab "General Precalculation" then we can able to send the report to user, instead of selecting variable values, if we use the option "User Specific" check box in the tab Receipient(s) (which will take selection from the role authorizations defined in the respective user roles), then we are getting the above error.
Recently we have upgraded suppor package, please find the system details below
P_BASIS - SAPKB70025
PI_BASIS - SAPKIPYM12
SAP_BW - SAPKW70027
Java - Support Package 25
We didn't change any roles and authorizations recently, just upgraded to latest SP. Can anyone suggest if any steps or checks need to be perfomed after applying these SP or missing anything?
Thanks in advance
Regards,
Venkatesh

Hi,
This is configuration issue. Please check the configuration between BW and EP below link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?QuickLink=index&overridelayout=true
Thanks,
Venkat

COGI Recording Error: 'callback event CONTEXT_MENU does not exist'

Hello!
Our ABAP Team is facing a weird error when they try to record COGI via transaction SHDB. They are getting the following error 'callback event CONTEXT_MENU does not exist'.
We´ve been looking a note in Marketplace but we didn't find anything.
Could someone help us, in order to find the solution.

Make sure the "Not a Batch Input Session" checkbox is selected when recording.
If you plan on using this later as part of BDC, make sure that the NOBINPT field is set to X when using "OPTIONS FROM opt" per the SAP documentation on Call Transaction.

Compilation error[ORA-02289: sequence does not exist] ,even if dbVersion '9.3.350',so strange!

I know the reason is that PL/SQL is pre-compilation, so now dbVersion < '9.3.350', even if I don't need get REFDESIG_ID_SEQ.nextval ,
it will also cause this compilation error. So my question is how should I code that?
When dbVersion < '9.3.350' , no sequence REFDESIG_ID_SEQ, just print '1####';
else get REFDESIG_ID_SEQ.nextval , then print '2####'
But now even if dbVersion < '9.3.350', it will cause compilation error[ORA-02289: sequence does not exist] .
How to resolve this? Thanks a lot.
declare
    maxid   number;
    nextid number;
    agileid number;
    v_date date;
    dbVersion varchar(8):=0;
begin
select substr(value,1,7) into dbVersion from propertytable where parentid = 5001 and propertyid=37;
        DBMS_OUTPUT.PUT_LINE(dbVersion);
        if (dbVersion < '9.3.350') then
              DBMS_OUTPUT.PUT_LINE('1####');
        else
              DBMS_OUTPUT.PUT_LINE('2####');
              select REFDESIG_ID_SEQ.nextval into agileid from dual;
        end if;
end;

In my DB, If dbVersion < '9.3.350' , no sequence REFDESIG_ID_SEQ
When dbVersion >= '9.3.350' ,sequence REFDESIG_ID_SEQ will exist,
Now my dbVersion < '9.3.350' , and this pl/sql also cause this error.
SO how should I to resolve it ?
Now I need a test case, if dbVersion < '9.3.350' , then print '1####';
else , get REFDESIG_ID_SEQ.nextval   firstly , then print '2####'
How should I code?Thanks a lot.

Build Error : The name "LocalizedStrings" does not exist in the namespace

I have localised my app to 5 languages, it builds and runs perfectly in Silverlight, but when i open the project in Blend to make changes
it shows the following error
The name "LocalizedStrings" does not exist in the namespace "clr-namespace:appname".
Since it is bound, i need to build it, only then the text is visible :(
Any suggestions?
Alfah
Alfahisham

This is the declaration for the LocalizedStrings.cs
namespace LoveCycles_Free
public class LocalizedStrings
public LocalizedStrings()
private static LoveCycles_Free.AppResources localizedResources = new LoveCycles_Free.AppResources();
public LoveCycles_Free.AppResources LocalizedResources
get
return localizedResources;
And this is my App.xaml
<Application
x:Class="LoveCycles_Free.App"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:phone="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:shell="clr-namespace:Microsoft.Phone.Shell;assembly=Microsoft.Phone"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" >

<Application.Resources>
<local:LocalizedStrings xmlns:local="clr-namespace:LoveCycles_Free" x:Key="LocalizedStrings" />
<FontFamily x:Key="CicleSemi">C:/Users/PT3560003/AppData/Local/Microsoft/Expression/Blend/Font Cache/pj1jeoqe.v1v/Cicle Semi.ttf#Cicle Semi</FontFamily>
<FontFamily x:Key="PeaSnow">CustomFonts/peasnow.ttf#Pea Snow</FontFamily>
<FontFamily x:Key="CicleFina">CustomFonts/CicleFina.ttf#Cicle</FontFamily>
<Style x:Key="AnimatedButtons" TargetType="Button">
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
<Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
<Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
<Setter Property="Padding" Value="10,3,10,5"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="Button">
<Border Background="Transparent">
<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="CommonStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0:0:0.2"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver"/>
<VisualState x:Name="Pressed">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
<DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
<VisualState x:Name="Disabled">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
</VisualStateGroup>
</VisualStateManager.VisualStateGroups>
<Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
<Border.RenderTransform>
<CompositeTransform/>
</Border.RenderTransform>
<Border.Background>
<ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_settings.png"/>
</Border.Background>
<ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
</Border>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
<Style x:Key="AddButton" TargetType="Button">
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
<Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
<Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
<Setter Property="Padding" Value="10,3,10,5"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="Button">
<Border Background="Transparent">
<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="CommonStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0:0:0.2"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver"/>
<VisualState x:Name="Pressed">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
<DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
<VisualState x:Name="Disabled">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
</VisualStateGroup>
</VisualStateManager.VisualStateGroups>
<Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
<Border.RenderTransform>
<CompositeTransform/>
</Border.RenderTransform>
<Border.Background>
<ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_password.png"/>
</Border.Background>
<ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
</Border>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</Application.Resources>
<Application.ApplicationLifetimeObjects>

<shell:PhoneApplicationService
Launching="Application_Launching" Closing="Application_Closing"
Activated="Application_Activated" Deactivated="Application_Deactivated"/>
</Application.ApplicationLifetimeObjects>
</Application>
Alfahisham

Error installation - Payload path does not exist and no media record specified.

Hi all,
When I tried to install the photosohop CS5, the below errors keep prompting out. Can anyone help me solve these errors! Thanks!
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 70 error(s), 58 warning(s)
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
WARNING: DW024: The payload: Adobe Photoshop CS5 Core {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
                Family: Photoshop
                ProductName: Adobe Photoshop CS5 Core_x64
                This parent relationship is not satisfied, because this payload is not present in this session.
WARNING: DW025: The payload with AdobeCode: {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
                Family: Adobe Web Suite CS5
                ProductName: Adobe Media Encoder CS5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
                Family: Adobe Web Suite CS5
                ProductName: Adobe Media Encoder CS5 Dolby WRAPPER X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
                Family: Adobe Web Suite CS5
                ProductName: Adobe Media Encoder CS5 PCI WRAPPER X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                Family: CoreTech
                ProductName: Adobe Player for Embedding x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                Family: Shared Technology
                ProductName: Photoshop Camera Raw (64 bit)
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                Family: CoreTech
                ProductName: AdobeCMaps x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                Family: CoreTech
                ProductName: Adobe Linguistics CS5 x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                Family: CoreTech
                ProductName: AdobePDFL x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                Family: CoreTech
                ProductName: AdobeTypeSupport x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                Family: CoreTech
                ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has recommended dependency on:
                Family: Adobe Web Suite CS5
                ProductName: Adobe Media Encoder CS5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {E8815668-95B0-443D-AC92-2BFD7DD8F16A} has recommended dependency on:
                Family: Adobe Web Suite CS5
                ProductName: Adobe Media Encoder CS5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {F9766AC1-1461-1033-B862-DF8FE1C033BE} has required dependency on:
                Family: InDesign
                ProductName: Adobe InDesign CS5 Icon Handler x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {F9766AC1-1461-1033-B862-DF8FE1C033BE} has recommended dependency on:
                Family: Adobe Web Suite CS5
                ProductName: Adobe Media Encoder CS5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
MSI Error message:
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe CSXS Infrastructure CS5: Install failed
ERROR: DW050: - Microsoft_VC90_ATL_x86: Install failed
ERROR: DW050: - Adobe Media Player: Install failed
ERROR: DW050: - SiteCatalyst NetAverages: Install failed
ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050: - Adobe Photoshop CS5 Support: Install failed
ERROR: DW050: - Adobe Bridge CS5: Install failed
ERROR: DW050: - Microsoft_VC80_ATL_x86: Install failed
ERROR: DW050: - DeviceCentral_DeviceCentral3LP-en_GB: Install failed
ERROR: DW050: - Creative Suite 5 Master Collection: Install failed
ERROR: DW050: - Adobe XMP Panels CS5: Install failed
ERROR: DW050: - Adobe Player for Embedding: Install failed
ERROR: DW050: - Photoshop Camera Raw: Install failed
ERROR: DW050: - AdobeColorCommonSetCMYK: Install failed
ERROR: DW050: - AdobeHelp: Install failed
ERROR: DW050: - Camera Profiles Installer: Install failed
ERROR: DW050: - Adobe Mini Bridge CS5: Install failed
ERROR: DW050: - AdobeColorJA CS5: Install failed
ERROR: DW050: - Adobe ReviewPanel CS5: Install failed
ERROR: DW050: - Adobe BrowserLab CS Live: Install failed
ERROR: DW050: - Microsoft_VC90_MFC_x86: Install failed
ERROR: DW050: - CSXS Story Extension: Install failed
ERROR: DW050: - Suite Shared Configuration CS5: Install failed
ERROR: DW050: - Adobe Linguistics CS5: Install failed
ERROR: DW050: - PDF Settings CS5: Install failed
ERROR: DW050: - DeviceCentral: Failed due to Language Pack installation failure
ERROR: DW050: - AdobeTypeSupport CS5: Install failed
ERROR: DW050: - AdobeColorVideoProfilesCS CS5: Install failed
ERROR: DW050: - AdobeColorCommonSetRGB: Install failed
ERROR: DW050: - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop CS5 International English Language Pack_AdobePhotoshop12-en_GB: Install failed
ERROR: DW050: - Adobe CSXS Extensions CS5: Install failed
ERROR: DW050: - AdobeOutputModule: Install failed
ERROR: DW050: - Microsoft_VC80_CRT_x86: Install failed
ERROR: DW050: - Adobe Illustrator CS5: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: DW050: - AdobeColorEU CS5: Install failed
ERROR: DW050: - AdobePDFL CS5: Install failed
ERROR: DW050: - HIL Help Search: Install failed
ERROR: DW050: - AdobeCMaps CS5: Install failed
ERROR: DW050: - AdobeColorNA CS5: Install failed
ERROR: DW050: - Required Common Fonts Installation: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed
ERROR: DW050: - Adobe Illustrator CS5_AdobeIllustrator15en_GBLanguagePack: Install failed
ERROR: DW050: - Microsoft_VC80_MFC_x86: Install failed
ERROR: DW050: - AdobeColorPhotoshop CS5: Install failed
ERROR: DW050: - Microsoft_VC80_MFCLOC_x86: Install failed
ERROR: DW050: - Recommended Common Fonts Installation: Install failed
ERROR: DW050: - Adobe Extension Manager CS5: Install failed
ERROR: DW050: - AdobeJRE: Install failed
ERROR: DW050: - Adobe ExtendScript Toolkit CS5: Install failed
ERROR: DW050: - Adobe AIR: Install failed

Hi,
I have followed the instructions and download the products, but there is still error.
I have downloaded the one that is circled in red. is that compatible with my com?
And these are the errors:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 45 error(s), 41 warning(s)
WARNING: DW024: The payload: Adobe Photoshop CS5 Core {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
          Family: Photoshop
          ProductName: Adobe Photoshop CS5 Core_x64
          This parent relationship is not satisfied, because this payload is not present in this session.
----------- Payload: {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
MSI Error message:
----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
MSI Error message:
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding 3.1.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {15FEDA5F-141C-4127-8D7E-B962D1742728} Adobe Photoshop CS5 12.0.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe CSXS Infrastructure CS5: Install failed
ERROR: DW050: - Microsoft_VC90_ATL_x86: Install failed
ERROR: DW050: - Adobe Media Player: Install failed
ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050: - Adobe Photoshop CS5 Support: Install failed
ERROR: DW050: - Adobe Bridge CS5: Install failed
ERROR: DW050: - Microsoft_VC80_ATL_x86: Install failed
ERROR: DW050: - DeviceCentral_DeviceCentral3LP-en_GB: Install failed
ERROR: DW050: - Adobe XMP Panels CS5: Install failed
ERROR: DW050: - Photoshop Camera Raw: Install failed
ERROR: DW050: - AdobeColorCommonSetCMYK: Install failed
ERROR: DW050: - Adobe Mini Bridge CS5: Install failed
ERROR: DW050: - AdobeColorJA CS5: Install failed
ERROR: DW050: - Adobe ReviewPanel CS5: Install failed
ERROR: DW050: - Microsoft_VC90_MFC_x86: Install failed
ERROR: DW050: - Suite Shared Configuration CS5: Install failed
ERROR: DW050: - Adobe Linguistics CS5: Install failed
ERROR: DW050: - PDF Settings CS5: Install failed
ERROR: DW050: - DeviceCentral: Failed due to Language Pack installation failure
ERROR: DW050: - AdobeTypeSupport CS5: Install failed
ERROR: DW050: - AdobeColorVideoProfilesCS CS5: Install failed
ERROR: DW050: - AdobeColorCommonSetRGB: Install failed
ERROR: DW050: - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop CS5 International English Language Pack_AdobePhotoshop12-en_GB: Install failed
ERROR: DW050: - Adobe CSXS Extensions CS5: Install failed
ERROR: DW050: - AdobeOutputModule: Install failed
ERROR: DW050: - Microsoft_VC80_CRT_x86: Install failed
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: DW050: - AdobeColorEU CS5: Install failed
ERROR: DW050: - AdobePDFL CS5: Install failed
ERROR: DW050: - AdobeCMaps CS5: Install failed
ERROR: DW050: - AdobeColorNA CS5: Install failed
ERROR: DW050: - Required Common Fonts Installation: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed
ERROR: DW050: - Microsoft_VC80_MFC_x86: Install failed
ERROR: DW050: - AdobeColorPhotoshop CS5: Install failed
ERROR: DW050: - Microsoft_VC80_MFCLOC_x86: Install failed
ERROR: DW050: - Recommended Common Fonts Installation: Install failed
ERROR: DW050: - Adobe Extension Manager CS5: Install failed
ERROR: DW050: - AdobeJRE: Install failed
ERROR: DW050: - Adobe ExtendScript Toolkit CS5: Install failed
ERROR: DW050: - Adobe AIR: Install failed
Thanks.

Import Error: The root directory does not exist

Hi,
I have some isuuses with importing the extended page. When I try to Import it throws an error.
Root Directory does not exist.
I am using the following command.
import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
G":
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
mRN" because it violates scope restrictions.
Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
ause it violates scope restrictions.
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
able style because it is inside "tableLayout".
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
N" of stackLayout style because it is inside "tableLayout".
Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
ecause it violates scope restrictions.
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Import completed.
But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
Could suggest how to solve this problem.
Thanks
Prabhat

Hi Tapash
while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
my concern is why i m getting this error
my import command looks like this
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
could u pls suggest some solution.

Error - Business partner 30000011 does not exist in role TR0151

Hello,
I am receiving an error "Business partner 30000011 does not exist in role TR0151" while creating a Fixed Deposit Transaction through FTR_CREATE.
Whilst testing Fixed Deposit accounting in SAP Treasury, i was testing a scenario of a MINOR and his/her GUARDIAN. Both have been created as Business Partners. However, i have NOT created the Minor further as a Customer.
I now have a MINOR defined as a Business Partner, a GUARDIAN defined as a BUSINESS PARTNER and CUSTOMER both and a relationship established between the two through the RELATIONSHIPS tab.
After doing the above, i am trying to create a Fixed Deposit through FTR_CREATE where i am receiving the above mentioned error.
In Customizing, i have checked that the TR0151 is assigned to COUNTERPARTY role and TR0154 to the BENEFICIARY role
The GUARDIAN was created with BP role - Business Partner General and then changed to COUNTER PARTY. The MINOR has been created with BP Role - Business Partner General and then changed to BENEFICIARY.
My expectation was that since MINOR is not defined as Customer, the system would not allow me to create a FD for the Minor and display such a message which would ask me to create the FD using the GUARDIAN as the Business Partner.
Request your help on this.
Regards,
Murtuza.
+91 9923205169

Hi,
It is not necessary that a business partner has to be linked to a customer account. In certain cases, your house bank itself acts as a counterparty, in that case you can directly settle to your bank account instead of managing through a customer.
For your case, you need to maintain the role of counterparty for MINOR as well. Only if the business partner exists in that role can you create a transaction.
Regards,
Ravi

ALV Filter Selection w/ error "WBS element 0000000000000000 does not exist"

Similar Messages

Maybe you are looking for