ALV Grid: Cell not available for selection

ALV GRID.
How can I make a cell(or an entire column) not available to be selected?

I was able to forbid users to click on cells that has got null values by:
a) declare the column as hotspot when you are building the fieldcatalog (fieldcatalog-key = 'X')
b) inside the form "user_command", after reading the data inside the internal table, use something like:
if wa_it_alldata-accounting_doc_nbr ne space.
processing logic
endif.
wa_it_alldata would be the internal table and can be prefilled by something like:
read data table, using index of row user clicked on
READ TABLE it_alldata_f INTO
wa_it_alldata INDEX rs_selfield-tabindex.
A more extensive eg can be found at: http://www.sapdevelopment.co.uk/reporting/alv/alvgrid.htm
Let us know if you still have the problem.
Rajib

Similar Messages

Software metering date not available for selection sccm 2012

Hi
I have installed SCCM 2012.
While viewing a report for software metering date and year are not available for selection. they are blank.

thaks
I is showing after restart.
Now there is another problem.
When I see the software metering report for enabled rule i.e. KasperskyAdminKit I can not understand the figures
Computers that have run a specific metered software program
NetBIOS Name
Installed Site Code
Last Usage
Total Usages
Average Usages per Day
Total Duration (min)
Average Duration of Use (min)
Average Duration per Day (min)
WIL-WNR-AV
PUN
11/16/2012 5:13:35 PM
1
0.03
7384.27
7384.27
246.14
How to know the the explanations for the underlined items ?

New custom field in MCVBAK not available for selection in RSA5

I added a custom field to the communication structure MCVBAK. When I go to RSA5 and select the Maintenance button to select it, it is not visible in the list. Do I need to do something other than add to MCVBAK to make it available for selection?
Thanks.

Hi Boater,
Have you included this new field from MCVBAK in the extract structure from LBWE T-code? If you haven't, you need to do this and it will be available in RSA6. Hope this helps.
Thanks and Regards
Subray Hegde

Creating InfoPackage: Data Targets not available for selection. Any hints?

Hi,
I have 5 ODSes which by design are to feed a 6th ODS. I created 5 update rules, using each of the 5 ODSes, separately as infosources.
The problem is that under the Infosource tree, I see the system generated InfoSouce but while creating the Infopackage, under Data Targets tab, my 5 ODSes are not available. Infact, it gives me no data targets for selection.
Any hints on what I might be missing in the steps?
Thanks

hi Amanda,
say you have zods1 to zods6, and zods6 is feed by zods1-zods5,
under infosource tree, you create infopackage from which ods's generated infosource ? i guess zods6,
then yes you wont see any ods in data target, since zods6 has no further update to any data target,
you will see zods6 in generated infosource of zods1,zods2,zods3,zods4,and zods5.
you won't see all zods1-zods5 in one infosource unless they have update rules for all zods1-zods5 with same infosource.
you will need to go one by one infosource for each ods's infosource.
hope this helps.
note : it seems recently you only reward 'solved' for the last reply, please note you can reward more than one star

Hierarchy not available for selection

A new hierarchy is created in R/3 for the 0Customer,but is not visible in the RSA3 for selection ? is there anything else to be done to make it available under selection?
-Sourav

Hi,
If you created a custom hierarchy based on sets then go to GS03 and check whether they exist and go to BW07 and check have you created a DataSource for it and the DataSource active.
Then Go to RSA3 and check.
Hope This Helps,
regards,
rik

System not available for selection in Maintenance Optimizer

Hello,
When planning the maintenance in MOPZ I choose product version and the system displays a list of systems assigned to the Product Version. However, the list only shows one of the two systems assigned to the logical component (prod system). I have looked at the logical component in SMSY listed under SAP ERP -> SAP ECC Server -> Z_SAP ERP and both systems are listed and are "green". A Consistency Check of the logical component shows no errors.
Any ideas are helpful, thank you.

Hello,
There is no 'display filter' on the screen you are referring to, Change Management -> Maintenance Optimizer -> Create New Maintenance Transaction. This is the initial screen of the maintenance transaction where it shows the 5 steps of the maintenance transaction. The following selectable fields are available:
Priority
Short Text
Product version
When I make a selection for the product version an additional selectable table is available where I can select the systems. I should be able to see all the systems assigned to the logical component, however I only see one of the two systems.
I have checked two other Solution Manager systems and there is no 'display filter' or 'hide filter' button either.
Regards,
Robert

My cell phone number is not available for iMessage on the iPad

My cell phone number is not available for iMessage on the iPad, it used to be available but now it is not and it won't let me add my phone number. My iMessage is working on my iPhone but not my iPad.

Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Troubleshooting Messages http://support.apple.com/kb/TS2755
 Cheers, Tom

Output does not match data sheet as only 1 report was available for selecti

Output does not match data sheet as only 1 report was available for selection in hyperion planning.Can anyone help me in resolving this issues.Its very urgent.

You will need to provide much more detailed information before anybody can help.
Cheers
John
http://john-goodwin.blogspot.com/

Verizon Safeguards "Not available for this cell phone number"

I just learned from your support rep, that Verizon Safeguards service does not work with the iPhone!. Under my Services under Verizon Safeguards, I get the following message: "Not available for this cell phone number". You gotta be kidding me Verizon...really.
I want to be able to use Verizon Safeguards and block calls a txt from specified numbers, like I have with every other phone I've had with Verizion!
PLEASE, ADD SUPPORT FOR THE iPHONE.

pwk wrote:
I just learned from your support rep, that Verizon Safeguards service does not work with the iPhone!. Under my Services under Verizon Safeguards, I get the following message: "Not available for this cell phone number". You gotta be kidding me Verizon...really.
I want to be able to use Verizon Safeguards and block calls a txt from specified numbers, like I have with every other phone I've had with Verizion!
PLEASE, ADD SUPPORT FOR THE iPHONE.
This is apparently a known issue, there are a few other threads on here. But I had a chat on here with a Verizon rep who said that they personally had numbers blocked on their iPhone4 and that it had to be done through Customer Care, which if you log on to MyVerizon, the number is under Support --> Contact Us. Who knows if it actually works.

The item is not available for your selected device

Greetings for everybody
really i read this statement a lot
and i have blackberry q10
and just i want to install viber for blackberry and i saw this "the item is not available for your selected device"
and its not for one app
if u have anything to do tell me i want to install a lot of appssssss from app world
thanks for reading
sorry for long message
thanks agian

Viber10 is not released for the Q10, currently only for the Z3, Z10, Z30 and P9882 models
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Buttons in ALV Grid cell need focus to be clicked :-(

Hi,
I have an ALV Grid with single cells displayed as buttons (dependend on the data in the corresponding row). Unfortunatelly the button-cells need focus to be clicked. So you need two clicks: one to get the focus to the desired cell and one to really click the button.
Any ideas how to make this work with one single click ? (Setting a hotspot does not work, cause hotspots have the same problem.)
Regards,
Tobi

Hello Tobias
The proposal by Naimesh is valid for CL_GUI_ALV_GRID, too. You may have a look at sample report ZUS_SDN_ALVGRID_EVENTS_HOTSPOT. Put the focus on any non-button cell and next click on any customer button.
*& Report ZUS_SDN_ALVGRID_EVENTS_HOTSPOT
*& Thread: Buttons in ALV Grid cell need focus to be clicked :-(
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1009251"></a>
REPORT zus_sdn_alvgrid_events_hotspot.
DATA:
gd_okcode TYPE ui_func,
gt_fcat TYPE lvc_t_fcat,
go_docking TYPE REF TO cl_gui_docking_container,
go_grid1 TYPE REF TO cl_gui_alv_grid.
DATA:
go_table TYPE REF TO cl_salv_table,
go_grid_adapter TYPE REF TO cl_salv_grid_adapter.
DATA:
gt_knb1 TYPE STANDARD TABLE OF knb1.
PARAMETERS:
p_bukrs TYPE bukrs DEFAULT '2000' OBLIGATORY.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
 CLASS-METHODS:
 handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
 IMPORTING
 e_row_id
 e_column_id
 es_row_no
 sender, " grid instance that raised the event
 handle_button_click FOR EVENT button_click OF cl_gui_alv_grid
 IMPORTING
 es_col_id
 es_row_no
 sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
* define local data
 DATA:
 ls_knb1 TYPE knb1,
 ls_col_id TYPE lvc_s_col.
 READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row_id-index.
 CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
 CASE e_column_id-fieldname.
 WHEN 'KUNNR'.
 SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
 SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
 CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
 WHEN 'ERNAM'.
* SET PARAMETER ID 'USR' FIELD ls_knb1-ernam.
* NOTE: no parameter id available, yet simply show the priciple
 CALL TRANSACTION 'SU01' AND SKIP FIRST SCREEN.
 WHEN OTHERS.
* do nothing
 ENDCASE.
* Set active cell to field BUKRS otherwise the focus is still on
* field KUNNR which will always raise event HOTSPOT_CLICK
 ls_col_id-fieldname = 'BUKRS'.
 CALL METHOD go_grid1->set_current_cell_via_id
 EXPORTING
 is_row_id = e_row_id
 is_column_id = ls_col_id.
ENDMETHOD. "handle_hotspot_click
METHOD handle_button_click.
* define local data
 DATA:
 ls_knb1 TYPE knb1.
 READ TABLE gt_knb1 INTO ls_knb1 INDEX es_row_no-row_id.
 CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
 SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
 SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
 CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
ENDMETHOD. "handle_button_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1
 WHERE bukrs = p_bukrs.
** TRY.
** CALL METHOD cl_salv_table=>factory
*** EXPORTING
*** LIST_DISPLAY = IF_SALV_C_BOOL_SAP=>FALSE
*** R_CONTAINER =
*** CONTAINER_NAME =
** IMPORTING
** r_salv_table = go_table
** CHANGING
** t_table = gt_knb1.
** CATCH cx_salv_msg .
** ENDTRY.
** go_table->display( ).
** go_table->get_metadata( ).
** EXIT.
* Create docking container
CREATE OBJECT go_docking
 EXPORTING
 parent = cl_gui_container=>screen0
 ratio = 90
 EXCEPTIONS
 OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grid
CREATE OBJECT go_grid1
 EXPORTING
 i_parent = go_docking
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
 lcl_eventhandler=>handle_hotspot_click FOR go_grid1,
 lcl_eventhandler=>handle_button_click FOR go_grid1.
* Build fieldcatalog and set hotspot for field KUNNR
PERFORM build_fieldcatalog_knb1.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
 CHANGING
 it_outtab = gt_knb1
 it_fieldcatalog = gt_fcat
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
 EXPORTING
 repid = syst-repid
 dynnr = '0100'
* CONTAINER =
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* ok-code field = GD_OKCODE
CALL SCREEN '0100'.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
 WHEN 'BACK' OR
 'END' OR
 'CANC'.
 SET SCREEN 0. LEAVE SCREEN.
 WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form BUILD_FIELDCATALOG_KNB1
* text
* --> p1 text
* <-- p2 text
FORM build_fieldcatalog_knb1 .
* define local data
DATA:
 ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
 EXPORTING
* I_BUFFER_ACTIVE =
 i_structure_name = 'KNB1'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_BYPASSING_BUFFER =
* I_INTERNAL_TABNAME =
 CHANGING
 ct_fieldcat = gt_fcat
 EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT gt_fcat INTO ls_fcat
 WHERE ( fieldname = 'KUNNR' OR
 fieldname = 'ERNAM' OR
 fieldname = 'BUKRS' ).
 IF ( ls_fcat-fieldname = 'BUKRS' ).
 ls_fcat-style = cl_gui_alv_grid=>mc_style_button.
 " column appears as button
 ELSEIF ( ls_fcat-fieldname = 'KUNNR' ).
 ls_fcat-style = cl_gui_alv_grid=>mc_style_button.
 ls_fcat-hotspot = abap_true.
 ELSE.
 ls_fcat-hotspot = abap_true.
 ENDIF.
 MODIFY gt_fcat FROM ls_fcat.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG_KNB1
Regards
Uwe

Button in alv grid cell using REUSE_ALV_GRID_DISPLAY

Hi all,
I want to make the contents of 2 columns of my alv grid as push button with values as text on it. I am not using classes or methods but alv grid fm. On clicking the button one dialog box has to pop up which gives edit option for the values in that coloumn, my question is how to introduce button in alv grid cell? if i can use t_fieldcatalog-icon, then please give me the complete steps for that.
Thanks.

this may helps u
u need to copy stadard screen elemetn to MARATAB1(at PF -STATUS)
You should copy the 'STANDARD' GUI status from program SAPLSLVC_FULLSCREEN
type this one in SE41 program name is:SAPLSLVC_FULLSCREEN
status : STANDARD_FULLSCREEN
and copy it ...
 Type-pool
type-pools slis.
 Tables
tables: mara,sscrfields.
 Selection screen
select-options: s_matnr for mara-matnr.
PARAMETERS: p_email TYPE somlreci1-receiver.
TYPES: BEGIN OF t_charmara,
matnr(18) TYPE c, " Material Number
ernam(12) TYPE c, " Person Credited
aenam(12) TYPE c, " Person Changed Object
pstat(15) TYPE c, " Maintenance Status
END OF t_charmara.
 Data Declarations
data: rt_extab type slis_t_extab, " Table of inactive function
 codes
 wa_charmara TYPE t_charmara, " work area of mara Table
 fs_fieldcat type slis_t_fieldcat_alv,
 " Field catalog with field
 descriptions
 t_fieldcat like line of fs_fieldcat,
 " Table of Field catalog
 r_ucomm like sy-ucomm, " User Command
 rs_selfield TYPE slis_selfield. " cursor position ALV
data: filedlayout type slis_layout_alv,
 heading type slis_t_listheader with header line,
 t_event type slis_t_event.
data: fs_event like line of t_event.
data: fs_sort type slis_sortinfo_alv,
 t_sort type slis_t_sortinfo_alv.
data: w_char(200) type c,
 w_matnr type mara-matnr.
fs_sort-fieldname = 'MATNR'.
fs_sort-up = 'X'.
fs_sort-group = '*'.
append fs_sort to t_sort.
clear fS_sort.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
 t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
 t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 w_cnt TYPE i,
 w_sent_all(1) TYPE c,
 w_doc_data LIKE sodocchgi1,
 gd_error TYPE sy-subrc,
 gd_reciever TYPE sy-subrc.
 Internal Tables
data: begin of it_mara occurs 0,
 matnr like mara-matnr, " Material Number
 ernam like mara-ernam, " Person Credited
 aenam like mara-aenam, " Person Changed Object
 pstat like mara-pstat, " Maintenance Status
 end of it_mara.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
 WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
 WITH HEADER LINE.
*at selection-screen on field event
AT SELECTION-SCREEN on s_matnr.
PERFORM f0100_VALIDATE_MATERIAL_NUMBER.
start-of-selection.
retrive Data from the data base table Mara
perform retrive_data_from_mara.
end-of-selection.
*Field catalog with field descriptions
perform fieldcat.
*perform top_of_page.
PERFORM EVENT_LIST.
*ALV Grid Display
perform alv_display.
Creating one Push button ENTER
perform maratab1 USING RT_EXTAB.
*& Form f0100_VALIDATE_MATERIAL_NUMBER
 text
There are no interface parameters to be passed to this subroutine
FORM F0100_VALIDATE_MATERIAL_NUMBER .
select matnr " Material Number
 from mara
up to 1 rows
 into mara-matnr
where matnr in s_matnr.
endselect.
IF sy-subrc NE 0.
 clear sscrfields-ucomm.
 MESSAGE e000 WITH 'Enter valid Material number'(003).
 ENDIF. " IF sy-subrc NE 0
ENDFORM. " f0100_VALIDATE_MATERIAL_NUMBER
*& Form retrive_data_from_mara
 text
*There are no interface parameters to be passed to this subroutine
FORM retrive_data_from_mara .
select matnr " Material Number
 ernam " Person Credited
 aenam " Person Changed Object
 pstat " Maintenance Status
 from mara
 into table It_mara
 where matnr in s_matnr.
IF sy-subrc NE 0.
 MESSAGE i001 WITH 'Records are not found'.
 exit.
 stop.
 ENDIF. " IF sy-subrc NE 0
ENDFORM. " retrive_data_from_mara
*& Form fieldcat
 text
*There are no interface parameters to be passed to this subroutine
FORM fieldcat .
*field catalog for MATNR
t_FIELDCAT-REF_TABNAME = 'MARA'.
t_fieldcat-fieldname = 'MATNR'.
t_fieldcat-col_pos = 1.
append t_fieldcat to fs_fieldcat.
clear t_fieldcat.
*field catalog for ERNAM
t_FIELDCAT-REF_TABNAME = 'MARA'.
t_fieldcat-fieldname = 'ERNAM'.
t_fieldcat-col_pos = 2.
append t_fieldcat to fs_fieldcat.
clear t_fieldcat.
*field catalog for AENAM
t_FIELDCAT-REF_TABNAME = 'MARA'.
t_fieldcat-fieldname = 'AENAM'.
t_fieldcat-col_pos = 3.
append t_fieldcat to fs_fieldcat.
clear t_fieldcat.
*field catalog for PSTAT
t_FIELDCAT-REF_TABNAME = 'MARA'.
t_fieldcat-fieldname = 'PSTAT'.
t_fieldcat-col_pos = 4.
append t_fieldcat to fs_fieldcat.
clear t_fieldcat.
ENDFORM. " fieldcat
*& Form EVENT_LIST
 text
*There are no interface parameters to be passed to this subroutine
FORM EVENT_LIST .
fs_event-name ='TOP_OF_PAGE'.
fs_event-form = 'TOP_PAGE'.
append fs_event TO t_EVENT.
CLEAR FS_EVENT.
fs_event-name ='END_OF_PAGE'.
fs_event-form = 'END_PAGE'.
append fs_event TO t_EVENT.
CLEAR FS_EVENT.
fs_event-name ='END_OF_LIST'.
fs_event-form = 'LIST_END'.
append fs_event TO t_EVENT.
CLEAR FS_EVENT.
ENDFORM. " EVENT_LIST
*& Form alv_display
 text
*There are no interface parameters to be passed to this subroutine
FORM alv_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = SY-REPID
 I_CALLBACK_PF_STATUS_SET = 'MARATAB1'
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_STRUCTURE_NAME =
IS_LAYOUT =
 IT_FIELDCAT = FS_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
 IT_SORT = T_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
 IT_EVENTS = T_EVENT
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 T_OUTTAB = IT_MARA[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " alv_display
form TOP_PAGE.
data:tbl_listheader type slis_t_listheader,
 wa_listheader type slis_listheader .
 wa_listheader-typ = 'S'.
 wa_listheader-info = 'Created by : Vijay Pawar'.
 append wa_listheader to tbl_listheader.
 wa_listheader-typ = 'S'.
 concatenate ' Date ' sy-datum into
 wa_listheader-info separated by space.
 append wa_listheader to tbl_listheader.
 wa_listheader-typ = 'S'.
 concatenate ' From ' s_matnr-low ' To ' s_matnr-high into
 wa_listheader-info separated by space.
 append wa_listheader to tbl_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
 IT_LIST_COMMENTARY = tbl_listheader
I_LOGO =
I_END_OF_LIST_GRID =
I_ALV_FORM =
endform. " form TOP_PAGE.
form END_PAGE.
STATICS W_PAGE TYPE I .
data:tbl_listheader type slis_t_listheader,
 wa_listheader type slis_listheader .
wa_listheader-typ = 'S'.
wa_listheader-info = W_PAGE.
append wa_listheader to tbl_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
 IT_LIST_COMMENTARY = tbl_listheader
I_LOGO =
I_END_OF_LIST_GRID =
I_ALV_FORM =
add 1 to w_page.
endform. " form END_PAGE.
form list_end.
data:tbl_listheader type slis_t_listheader,
wa_listheader type slis_listheader .
wa_listheader-typ = 'S'.
wa_listheader-info = '......................................Last Page'
append wa_listheader to tbl_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
 IT_LIST_COMMENTARY = tbl_listheader
I_LOGO =
I_END_OF_LIST_GRID =
I_ALV_FORM =
endform. " form list_end.
*& Form maratab1
 text
 -->P_RT_EXTAB text
FORM maratab1 USING P_RT_EXTAB.
SET PF-STATUS 'MARATAB1' EXCLUDING rt_extab.
ENDFORM. " maratab1
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
case r_ucomm.
 when 'ENTER'.
 perform bulid_xls_data_table.
 PERFORM send_file_as_email_attachment
 tables it_message
 it_attach
 using p_email "'[email protected]'
 'Example .xls documnet attachment'
 'XLS'
 'filename'
 changing gd_error
 gd_reciever.
 perform populate_email_message_body.
 PERFORM initiate_mail_execute_program.
endcase. " case r_ucomm.
endform. " FORM user_command
perform populate_email_message_body.
PERFORM initiate_mail_execute_program.
 CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
EXPORTING
 DATA_FILENAME = 'MARA.XLS'
 DATA_PATH_FLAG = 'W'
DATA_ENVIRONMENT =
 DATA_TABLE = ITAB[]
MACRO_FILENAME =
MACRO_PATH_FLAG = 'E'
MACRO_ENVIRONMENT =
 WAIT = 'X'
DELETE_FILE = 'X'
EXCEPTIONS
 NO_BATCH = 1
 EXCEL_NOT_INSTALLED = 2
 INTERNAL_ERROR = 3
 CANCELLED = 4
 DOWNLOAD_ERROR = 5
 NO_AUTHORITY = 6
 FILE_NOT_DELETED = 7
 OTHERS = 8
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 leave to list-processing.
endcase.
*& Form bulid_xls_data_table
 text
*There are no interface parameters to be passed to this subroutine
FORM bulid_xls_data_table .
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
 con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
 con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
 con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'matnr' 'ernam' 'aenam' 'pstat'
 INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT It_mara INTO wa_charmara.
 CONCATENATE wa_charmara-matnr wa_charmara-ernam
 wa_charmara-aenam wa_charmara-pstat
 INTO it_attach SEPARATED BY con_tab.
 CONCATENATE con_cret it_attach INTO it_attach.
 APPEND it_attach.
ENDLOOP. " LOOP AT it_mara INTO...
ENDFORM. " bulid_xls_data_table
*& Form send_file_as_email_attachment
 Send email
 -->P_IT_MESSAGE text
 -->P_IT_ATTACH text
 -->P_P_EMAIL text
 -->P_0387 text
 -->P_0388 text
 -->P_0389 text
 -->P_0390 text
 -->P_0391 text
 -->P_0392 text
 <--P_GD_ERROR text
 <--P_GD_RECIEVER text
FORM send_file_as_email_attachment tables pit_message
 pit_attach
 using p_email
 p_mtitle
 p_format
 p_filename
 p_attdescription
 p_sender_address
 p_sender_addres_type
 changing p_error
 p_reciever.
DATA: ld_error TYPE sy-subrc,
 ld_reciever TYPE sy-subrc,
 ld_mtitle LIKE sodocchgi1-obj_descr,
 ld_email LIKE somlreci1-receiver,
 ld_format TYPE so_obj_tp ,
 ld_attdescription TYPE so_obj_nam ,
 ld_attfilename TYPE so_obj_des ,
 ld_sender_address LIKE soextreci1-receiver,
 ld_sender_address_type LIKE soextreci1-adr_typ,
 ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
 ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = w_doc_data
 put_in_outbox = 'X'
 sender_address = ld_sender_address
 sender_address_type = ld_sender_address_type
 commit_work = 'X'
 IMPORTING
 sent_to_all = w_sent_all
 TABLES
 packing_list = t_packing_list
 contents_bin = t_attachment
 contents_txt = it_message
 receivers = t_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
 ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM. " send_file_as_email_attachment
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
 Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
 WITH output = 'X'
 AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
 Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test mara records'.
APPEND it_message.
endform. "form populate_email_message_bod
rewards if it helps u

Item availability for selected items and directly create the delivery

Hi All,
For a very big sales order ..lets say having 700 line items ...is there any convenient way to create the delivery for selected items ..e.g. 30-40 line items rather going and selecting the line items then doing the item availability.
do you have any LSMW format by which we can do the item availability for selected items and directly create the delivery.
kindly Guide me..
With Regards
Azeez.Mohd

Hi ,
There is no stand way of doing it . You need to take help of abaper to do this :
1. Create a t code where if you give sale order number , it displays a report with all the items with a check box near to it as we see in SE16 .
2. This report could be best in ALV form where users can do "ctr+f" and search only the required materials then select those lines and press a button on the top of report .
3. Once the button is pressed , program will run vL01n ( create delv in backgrnd) in a BDC form . At time of delev creating , the bdc program in backgrnd uses only those items which were selected by user and not the other items .
4. Program will create a delv using a BDC in background and return the delv number for user to view tht.
U can also try using FM : RV_DELIVERY_CREATE to create delv in backgrnd after user selection if BDC is getting tricky.
Hopefully ,this shuld work and will be a easy process for the customers.
Let us know the outcome .. .
B O L ..
Hope this Helps !!!

Why do I get message "back up disc is not available" for Time Machine? It

why do I get message "back up disc is not available" for Time Machine? It's plugged in.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to a failed backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

How to display tooltip in ALV GRID CELL?

Hello,
I'm trying to display dynamic tootips for data in ALV GRID Cells.
My ALV Gid Cells content does not display Icon or symbol or Exception but pure data (In my case dates).
Is there a way to do display a toolip that will change dynamicaly according to a rule.
I took a look at the BCALV_DEMO_TOOLTIP program
but it does not answer my expectation since it display
toltip for Icon or symbol or Exception.
Can someone help on this case.
Best regards
Harry

Hai Harry
     icon
value set: SPACE, 'X'           'X' = column contents to be output as an icon.
The caller must consider the printability of icons.
     symbol
value set: SPACE, 'X'          'X' = column contents are to be output as a symbol.
The internal output table column must be a valid symbol character.
The caller must consider the printability of symbols.
Symbols can usually be printed, but may not always be output correctly, depending on the printer configuration.
Thanks & regards
Sreenu

ALV Grid: Cell not available for selection

Similar Messages

Maybe you are looking for