ALV Grid Subscreen to Display Text
Folks,
I am really sorry I am creating a new thread for this because I can see it has been discussed a lot but I am finding it hard to clearly identify what needs to be done from all the posts.
I have an ABAP with a selection screen, it runs and generates an ALV output, on that ALV output I have a column called COMMENT, in the column COMMENT there is a string of text which can be very large. Since I can not change the row height on the ALV grid I am going to implement a work-around where when the user double-clicks on the comment, it pops up a screen displaying the full text.
I presume I need to call a subscreen to get this to happen but I can not see how to do this and any help would be greatly appreciated.
Many Thanks,
Colm
P.S. Here is how I catch the double click.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
DATA: w_ans(1).
CASE r_ucomm. "The users command
WHEN '&IC1'. "Double Click
*Doc drill down
IF rs_selfield-fieldname = 'COMMENT'.
READ TABLE gt_output INDEX rs_selfield-tabindex.
IF sy-subrc = 0.
*Call the screen here displaying the full note text
ENDIF.
I feel so foolish, I was trying to re-invent the wheel and didn't think before I asked. Apologies and Thanks.
However, if for some reason I didn't want to use the POPUP_TEXT FM, is there a way I could have called the subscreen?
Here is the code I used if anyone is interested:
DATA: w_ans(1),
lt_text TYPE TABLE OF trtab,
ls_title TYPE c,
crlf(2) TYPE c VALUE cl_abap_char_utilities=>cr_lf.
CASE r_ucomm. "The users command
WHEN '&IC1'. "Double Click
*Doc drill down
IF rs_selfield-fieldname = 'COMMENT'.
READ TABLE gt_output INDEX rs_selfield-tabindex.
IF sy-subrc = 0.
SPLIT gt_output-comment AT crlf INTO TABLE lt_text.
CALL FUNCTION 'LAW_SHOW_POPUP_WITH_TEXT'
EXPORTING
titelbar = ls_title
line_size = 132
TABLES
list_tab = lt_text.
Similar Messages
-
Hi experts, how are you.
What is the difference between ALV Grid Display and ALV List Display?ALV LIST Can be coded using only FMs
ALV GRID Can be coded using FMs and object oriented concepts
ALV LIST Can be displayed hieraicharlly
ALV GRID cannot be displayed hierarichally
ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
Thanks
Seshu -
ALV grid is not displaying few fields of final internal table of type DMBTR
hello frnds,
i am displaying 10 fields in ALV grid using field catalog.
among them five fields are currency fields on which i doing some arithematic operations. but all these fields are not getting displayed in alv grid.
here is my code....
declaring final strucutre to generate report
TYPES:BEGIN OF ty_final,
gjahr TYPE gjahr, " Year
wwert TYPE wwert_d, " Traslation date
bukrs TYPE bukrs, " company code
hkont TYPE hkont, " General ledger account
txt20 TYPE txt20_skat, " Account name
belnr TYPE belnr_d, " Purchase order number
shkzg TYPE shkzg, " Dt/Cr indicator
dmbtr1 TYPE dmbtr, " Ammount in local currency
v_alc TYPE dmbtr, " Ammount in local currency
wrbtr TYPE wrbtr, " Ammount in foreign currency
ebeln TYPE ebeln, " Purchase order number
ebelp TYPE ebelp, " Item number
matnr TYPE matnr, " Material number
menge TYPE menge_d, " Qunatity
meins TYPE meins, " Unit of measure
stprs TYPE stprs, " Std material master
v_iv TYPE dmbtr, " Invoice value
pswsl TYPE pswsl, " Currency
v_erc TYPE dmbtr, " Exchange rate calculated
v_op TYPE dmbtr, " Order price
v_uos TYPE dmbtr, " Unit order to stock
v_io TYPE dmbtr, " Invoice to order
v_uv TYPE dmbtr, " Unit value
v_t TYPE dmbtr, " Total
v_d TYPE dmbtr, " Differecne
netpr TYPE bprei, " Net price in purchasing document
v_total TYPE dmbtr, " Total
v_os TYPE dmbtr, " Order to stock
v_ito TYPE dmbtr, " Invoice to order
saknr TYPE saknr, " G/L account number
END OF ty_final.
FORM move_data.
IF NOT i_bseg[] IS INITIAL.
LOOP AT i_bseg INTO wa_bseg.
wa_final-gjahr = wa_bseg-gjahr.
wa_final-bukrs = wa_bseg-bukrs.
wa_final-hkont = wa_bseg-hkont.
wa_final-belnr = wa_bseg-belnr.
wa_final-shkzg = wa_bseg-shkzg.
wa_final-wrbtr = wa_bseg-wrbtr.
wa_final-ebeln = wa_bseg-ebeln.
wa_final-ebelp = wa_bseg-ebelp.
wa_final-matnr = wa_bseg-matnr.
wa_final-menge = wa_bseg-menge.
wa_final-meins = wa_bseg-meins.
wa_final-pswsl = wa_bseg-pswsl.
wa_final-dmbtr1 = wa_bseg-dmbtr.
wa_final-saknr = wa_bseg-saknr.
wa_final-v_total = wa_bseg-dmbtr.
READ TABLE i_bkpf INTO wa_bkpf WITH KEY bukrs = wa_bseg-bukrs.
IF sy-subrc = 0.
wa_final-wwert = wa_bkpf-wwert.
ENDIF.
CLEAR wa_bkpf.
READ TABLE i_mbew INTO wa_mbew WITH KEY matnr = wa_bseg-matnr.
IF sy-subrc = 0.
wa_final-stprs = wa_mbew-stprs.
ENDIF.
CLEAR wa_mbew.
READ TABLE i_ekpo INTO wa_ekpo WITH KEY ebeln = wa_bseg-ebeln.
IF sy-subrc = 0.
wa_final-netpr = wa_ekpo-netpr.
ENDIF.
CLEAR wa_ekpo.
READ TABLE i_skat INTO wa_skat WITH KEY saknr = wa_bseg-saknr.
IF sy-subrc = 0.
wa_final-txt20 = wa_skat-txt20.
ENDIF.
calculating output values
IF wa_bseg-shkzg = 'H'.
wa_final-v_alc = -1 * wa_bseg-dmbtr.
ELSEIF wa_bseg-shkzg = 'S'.
wa_final-v_alc = 1 * wa_bseg-dmbtr.
ENDIF.
DATA : l_c_v_alc TYPE p DECIMALS 2,
l_c_v_iv TYPE p DECIMALS 2.
l_c_v_alc = wa_final-v_alc.
IF wa_bseg-menge NE 0.
wa_final-v_iv = wa_bseg-dmbtr / wa_bseg-menge.
ENDIF.
IF wa_bseg-dmbtr NE 0.
wa_final-v_erc = wa_bseg-wrbtr / wa_final-dmbtr1.
ENDIF.
IF wa_final-v_erc NE 0.
wa_final-v_op = wa_ekpo-netpr / wa_final-v_erc.
ENDIF.
wa_final-v_uos = wa_mbew-stprs - wa_final-v_op.
wa_final-v_io = wa_final-v_iv + wa_final-v_uos.
wa_final-v_uv = wa_final-v_uos + wa_final-v_io.
wa_final-v_t = wa_final-v_uv + wa_bseg-menge.
wa_final-v_d = wa_final-v_t - wa_final-v_alc.
wa_final-v_os = wa_final-v_uos * wa_bseg-menge.
wa_final-v_ito = wa_final-v_io * wa_bseg-menge.
CLEAR wa_bseg.
APPEND wa_final TO i_final.
CLEAR wa_final.
ENDLOOP.
ENDIF.
ENDFORM. "data_retrieval
*& Form build_fieldcat
text
--> p1 text
<-- p2 text
FORM build_fieldcat.
CLEAR wa_fieldcat.
* TYPES : v_alc TYPE dmbtr. "curr. " decimal 2.
DATA: l_c_v_alc TYPE p DECIMALS 2,
l_c_v_iv TYPE p DECIMALS 2 .
l_c_v_alc = v_alc.
l_c_v_iv = v_iv.
Constant Declarations.
CONSTANTS:
l_c_gjahr(5) TYPE c VALUE 'GJAHR', " Year
l_c_wwert(5) TYPE c VALUE 'WWERT', " Traslation date
l_c_bukrs(5) TYPE c VALUE 'BUKRS', " company code
l_c_hkont(5) TYPE c VALUE 'HKONT', " General ledger account
l_c_txt20(10) TYPE c VALUE 'TXT20', " Account name
l_c_belnr(5) TYPE c VALUE 'BELNR', " Doc number
l_c_shkzg(5) TYPE c VALUE 'SHKZG', " Dt/Cr indicator
l_c_dmbtr(5) TYPE c VALUE 'DMBTR1', " Ammount in local currency
" l_c_v_alc TYPE c VALUE 'V_ALC', " Ammount in local currency
l_c_wrbtr(5) TYPE c VALUE 'WRBTR', " Ammount in foreign currency
l_c_ebeln(5) TYPE c VALUE 'EBELN', " Purchase order number
l_c_ebelp(5) TYPE c VALUE 'EBELP', " Item number
l_c_matnr(5) TYPE c VALUE 'MATNR', " Material number
l_c_menge(7) TYPE c VALUE 'MENGE', " Qunatity
l_c_meins(5) TYPE c VALUE 'MEINS', " Unit of measure
l_c_stprs(5) TYPE c VALUE 'STPRS', " Std material master
" l_c_v_iv(4) TYPE c VALUE 'V_IV', " Invoice value
l_c_pswsl(5) TYPE c VALUE 'PSWSL', " Currency
l_c_v_erc(5) TYPE c VALUE 'V_ERC', " Exchange rate calculated
l_c_v_op(4) TYPE c VALUE 'V_OP', " Order price
l_c_v_uos(5) TYPE c VALUE 'V_UOS', " Unit order to stock
l_c_v_io(4) TYPE c VALUE 'V_IO', " Invoice to order
l_c_v_uv(4) TYPE c VALUE 'V_UV', " Unit value
l_c_v_t(3) TYPE c VALUE 'V_T', " Total
l_c_v_d(3) TYPE c VALUE 'V_D', " Differecne
l_c_netpr(5) TYPE c VALUE 'NETPR', " Net price in purchasing document
l_c_v_total(7) TYPE c VALUE 'V_TOTAL', " Total
l_c_v_os(4) TYPE c VALUE 'V_OS', " Order to stock
l_c_v_ito(5) TYPE c VALUE 'V_ITO', " Invoice to order
l_c_saknr(5) TYPE c VALUE 'SAKNR', " G/L account number
l_c_i_final(7) TYPE c VALUE 'I_FINAL'. " Final internal table
Fieldcat for fiscal year
wa_fieldcat-col_pos = 1.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_gjahr.
wa_fieldcat-seltext_m = text-007.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Translation date
wa_fieldcat-col_pos = 2.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_wwert.
wa_fieldcat-seltext_m = text-008.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Company code
wa_fieldcat-col_pos = 3.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_bukrs.
wa_fieldcat-seltext_m = text-009.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for General ledger account
wa_fieldcat-col_pos = 4.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_hkont.
wa_fieldcat-seltext_m = text-010.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Account name
wa_fieldcat-col_pos = 5.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_txt20.
wa_fieldcat-seltext_m = text-011.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Doc number
wa_fieldcat-col_pos = 6.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_belnr.
wa_fieldcat-seltext_m = text-012.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Dt/Cr indicator
wa_fieldcat-col_pos = 7.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_shkzg.
wa_fieldcat-seltext_m = text-013.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Ammount in local currency
wa_fieldcat-col_pos = 8.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = 'DMBTR1'.
wa_fieldcat-seltext_m = text-014.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Ammount in local currency
wa_fieldcat-col_pos = 9.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = 'V_ALC'.
wa_fieldcat-seltext_m = text-015.
wa_fieldcat-ref_fieldname = 'DMBTR'.
wa_fieldcat-no_sign = 'X'.
wa_fieldcat-do_sum = c_x.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Ammount in foreign currency
wa_fieldcat-col_pos = 10.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_wrbtr.
wa_fieldcat-seltext_m = text-016.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Purchse order number
wa_fieldcat-col_pos = 11.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_ebeln.
wa_fieldcat-seltext_m = text-017.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Item No
wa_fieldcat-col_pos = 12.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_ebelp.
wa_fieldcat-seltext_m = text-018.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Material number
wa_fieldcat-col_pos = 13.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_matnr.
wa_fieldcat-seltext_m = text-019.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Qunatity
wa_fieldcat-col_pos = 14.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_menge.
wa_fieldcat-seltext_m = text-020.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Unit of measure
wa_fieldcat-col_pos = 15.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_meins.
wa_fieldcat-seltext_m = text-021.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Std material master
wa_fieldcat-col_pos = 16.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_stprs.
wa_fieldcat-seltext_m = text-022.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Invoice value,
wa_fieldcat-col_pos = 17.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = 'V_IV'.
wa_fieldcat-seltext_m = text-023.
wa_fieldcat-ref_fieldname = 'DMBTR'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Currency
wa_fieldcat-col_pos = 18.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_pswsl.
wa_fieldcat-seltext_m = text-024.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Exchange rate calculated
wa_fieldcat-col_pos = 19.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = 'V_ERC'.
wa_fieldcat-seltext_m = text-025.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Order price
wa_fieldcat-col_pos = 20.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_op.
wa_fieldcat-seltext_m = text-026.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Unit order to stock
wa_fieldcat-col_pos = 21.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_uos.
wa_fieldcat-seltext_m = text-027.
wa_fieldcat-do_sum = c_x.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Invoice to order
wa_fieldcat-col_pos = 22.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_io.
wa_fieldcat-seltext_m = text-028.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Unit value
wa_fieldcat-col_pos = 23.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_uv.
wa_fieldcat-seltext_m = text-029.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Total
wa_fieldcat-col_pos = 24.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_t.
wa_fieldcat-seltext_m = text-030.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Difference
wa_fieldcat-col_pos = 25.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_d.
wa_fieldcat-seltext_m = text-031.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Net Price in Purchasing Document
wa_fieldcat-col_pos = 26.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_netpr.
wa_fieldcat-seltext_m = text-032.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Total
wa_fieldcat-col_pos = 27.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_total.
wa_fieldcat-seltext_m = text-033.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Order to stock
wa_fieldcat-col_pos = 28.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_os.
wa_fieldcat-seltext_m = text-034.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Fieldcat for Invoice to order
wa_fieldcat-col_pos = 29.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_v_ito.
wa_fieldcat-seltext_m = text-035.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
fieldcat for invoice to order
wa_fieldcat-col_pos = 30.
wa_fieldcat-tabname = l_c_i_final.
wa_fieldcat-fieldname = l_c_saknr.
wa_fieldcat-seltext_m = text-035.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
ENDFORM. "build_fieldcatHi romanch,
defining the field catalog you must reference all currency fields to the respective currency key field (type CUKY).
<alv_fieldcat>-cfieldname = 'HWAER'.
This is sample for alv output of a currency field. The alv structure has a field HWAER which carries the currency key, e.g. USD or so.
Obviously you do not provide a cutrrency key for your values. If they are initial (zero), ALV will not display them as 0,00 but leave the field empty if the reference too currency key is not established.
If you define a DDIC structure for the ALV output this refernce is enforced. You can pass the DDIC structure name to the ALV and don not have to create the field catalog manually.
Regards,
Clemens -
alv grid column name could not be displayed fully.we manually want to drag the column,to see the column name fully. for ex. if column name is 'COMPANYNAME'.it shows 'COMPA' alone.
how could i solve this problem....?hI,
Check the below code...
*& Report ZALV_PROGRAAM
REPORT ZALV_PROGRAAM.
TYPE-POOLS SLIS.
DATA : BEGIN OF WA_KNA1,
KUNNR TYPE KUNNR,
NAME1 TYPE NAME1,
END OF WA_KNA1,
IT_KNA1 LIKE TABLE OF WA_KNA1.
DATA : IT_FCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FCAT LIKE LINE OF IT_FCAT.
SELECT KUNNR NAME1 INTO TABLE IT_KNA1 FROM KNA1 UP TO 5 ROWS.
PERFORM FCAT USING '1' 'KUNNR' 'CUSTOMERNUMBER' '40'.
PERFORM FCAT USING '2' 'NAME1' 'CUSTOMERNAME' '40'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-CPROG
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = IT_FCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_KNA1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form FCAT
text
-->P_0052 text
-->P_0053 text
-->P_0054 text
-->P_0055 text
form FCAT using FP_COL_POS
FP_FIELDNAME
FP_SELTEXT_M
FP_OUTPUTLEN.
WA_FCAT-COL_POS = FP_COL_POS.
WA_FCAT-FIELDNAME = FP_FIELDNAME.
WA_FCAT-SELTEXT_M = FP_SELTEXT_M.
WA_FCAT-OUTPUTLEN = FP_OUTPUTLEN.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
endform. " FCAT
thanks,
Thiru. R -
How to Set Checkbox of ALV Grid Dark on Display Mode
ABAP experts, I want to switch between display mode and edit mode for some columns of ALV Grid. So I set "LVC_S_FCAT-EDIT" "X" for the columns which need to switch mode, and use method "SET_READY_FOR_INPUT" to switch.
Currently, the function of switch mode has been achieved. But icons of checkbox columns are light but not dark when display mode, although the columns can't be edited. (Please refer to the image below.) I want to make checkbox columns dark as other columns on display mode.
I tried to use "CL_GUI_ALV_GRID=>MC_STYLE_ENABLED" and "CL_GUI_ALV_GRID=>MC_STYLE_DISABLED", but failed. I also studied sample program "BCALV_EDIT_05" which is related to checkbox in ALV Grid, and compared my program with this program. But I still have not found problems.
Help me solve this problem, please.
Part of my codes are as follows.
Part 1:
IF iv_is_create_group = abap_true OR iv_is_edit_group = abap_true.
set_enable( iv_flag = 1 ).
LOOP AT gt_acct_group_item ASSIGNING <lfs_acct_group_item>.
CLEAR ls_celltab.
IF <lfs_acct_group_item>-celltab IS INITIAL.
CLEAR ls_celltab.
ls_celltab-fieldname = 'CHECK_BOX'.
ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
APPEND ls_celltab TO <lfs_acct_group_item>-celltab.
CLEAR ls_celltab.
ls_celltab-fieldname = 'XPORE'.
ls_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
APPEND ls_celltab TO <lfs_acct_group_item>-celltab.
ELSE.
LOOP AT <lfs_acct_group_item>-celltab ASSIGNING <lfs_celltab>.
<lfs_celltab>-style = cl_gui_alv_grid=>mc_style_enabled.
ENDLOOP.
ENDIF.
ENDLOOP.
ELSE.
set_enable( iv_flag = 0 ).
LOOP AT gt_acct_group_item ASSIGNING <lfs_acct_group_item>.
IF <lfs_acct_group_item>-celltab IS INITIAL.
CLEAR ls_celltab.
ls_celltab-fieldname = 'CHECK_BOX'.
ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
APPEND ls_celltab TO <lfs_acct_group_item>-celltab.
CLEAR ls_celltab.
ls_celltab-fieldname = 'XPORE'.
ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
APPEND ls_celltab TO <lfs_acct_group_item>-celltab.
ELSE.
LOOP AT <lfs_acct_group_item>-celltab ASSIGNING <lfs_celltab>.
<lfs_celltab>-style = cl_gui_alv_grid=>mc_style_disabled.
ENDLOOP.
ENDIF.
ENDLOOP.
ENDIF.
CALL METHOD gr_grid->refresh_table_display
* EXPORTING
* is_stable =
* i_soft_refresh =
EXCEPTIONS
finished = 1
OTHERS = 2
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
Part 2:
METHOD set_enable.
gr_grid->set_ready_for_input(
i_ready_for_input = iv_flag
ENDMETHOD.Hi Liu,
Please go through the below code.
*& Report YEDIT_DISPLAY
REPORT YEDIT_DISPLAY.
TABLES : VBAK.
TYPE-POOLS SLIS.
TYPES : BEGIN OF TY_VBAK,
VBELN TYPE VBAK-VBELN,
END OF TY_VBAK,
BEGIN OF TY_FINAL,
BOX TYPE C,
VBELN TYPE VBAK-VBELN,
END OF TY_FINAL.
DATA : IT_VBAK TYPE TABLE OF TY_VBAK,
WA_VBAK TYPE TY_VBAK,
IT_FINAL TYPE TABLE OF TY_FINAL,
WA_FINAL TYPE TY_FINAL,
IT_FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV,
WA_FCAT TYPE SLIS_FIELDCAT_ALV.
START-OF-SELECTION.
PERFORM FETCH_DATA.
PERFORM FCAT_DATA.
PERFORM DISPLAY.
*& Form FETCH_DATA
* text
* --> p1 text
* <-- p2 text
FORM FETCH_DATA .
SELECT VBELN INTO TABLE IT_VBAK FROM VBAK UP TO 10 ROWS.
LOOP AT IT_VBAK INTO WA_VBAK.
WA_FINAL-VBELN = WA_VBAK-VBELN.
APPEND WA_FINAL TO IT_FINAL.
CLEAR : WA_FINAL , WA_VBAK.
ENDLOOP.
ENDFORM. " FETCH_DATA
*& Form FCAT_DATA
* text
* --> p1 text
* <-- p2 text
FORM FCAT_DATA .
WA_FCAT-COL_POS = 1.
WA_FCAT-FIELDNAME = 'BOX'.
WA_FCAT-TABNAME = 'IT_FINAL'.
WA_FCAT-OUTPUTLEN = '3'.
WA_FCAT-SELTEXT_M = 'BOX'.
wa_fcat-checkbox = 'X'.
WA_FCAT-EDIT = 'X'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-COL_POS = 2.
WA_FCAT-FIELDNAME = 'VBELN'.
WA_FCAT-TABNAME = 'IT_FINAL'.
WA_FCAT-OUTPUTLEN = '3'.
WA_FCAT-SELTEXT_M = 'Sales Document'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
ENDFORM. " FCAT_DATA
*& Form DISPLAY
* text
* --> p1 text
* <-- p2 text
FORM DISPLAY .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
* I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
* I_CALLBACK_TOP_OF_PAGE = ' '
IT_FIELDCAT = IT_FCAT
* I_DEFAULT = 'X'
* I_SAVE = ' '
TABLES
T_OUTTAB = IT_FINAL
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
ENDFORM. " DISPLAY
FORM USER_COMMAND USING UCOMM TYPE SY-UCOMM
RTAB TYPE slis_selfield.
CASE UCOMM.
WHEN '&IC1'.
MESSAGE 'SUCESSFUL' TYPE 'S'.
WHEN '&DATA_SAVE'.
PERFORM FIL_FCAT.
PERFORM DISPLAY1.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN OTHERS.
LEAVE TO SCREEN 0.
ENDCASE.
ENDFORM.
*& Form FIL_FCAT
* text
* --> p1 text
* <-- p2 text
FORM FIL_FCAT .
CLEAR IT_FCAT.
WA_FCAT-COL_POS = 1.
WA_FCAT-FIELDNAME = 'BOX'.
WA_FCAT-TABNAME = 'IT_FINAL'.
WA_FCAT-OUTPUTLEN = '3'.
WA_FCAT-SELTEXT_M = 'BOX'.
wa_fcat-checkbox = 'X'.
** WA_FCAT-EDIT = 'X'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
WA_FCAT-COL_POS = 2.
WA_FCAT-FIELDNAME = 'VBELN'.
WA_FCAT-TABNAME = 'IT_FINAL'.
WA_FCAT-OUTPUTLEN = '3'.
WA_FCAT-SELTEXT_M = 'Sales Document'.
APPEND WA_FCAT TO IT_FCAT.
CLEAR WA_FCAT.
ENDFORM. " FIL_FCAT
*& Form DISPLAY1
* text
* --> p1 text
* <-- p2 text
FORM DISPLAY1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
* I_CALLBACK_TOP_OF_PAGE = ' '
IT_FIELDCAT = IT_FCAT
* I_DEFAULT = 'X'
* I_SAVE = ' '
TABLES
T_OUTTAB = IT_FINAL
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
ENDFORM. " DISPLAY1
Here i written code under the SAVE button , if requires you create your own status and apply.
Regards,
Krishna -
ALV Grid is not Displaying after executing?
Hi Guys,
I am using ALV grid in my program with OO Concepts.I was not able to see the final o/p after entering the data into the selection Screen.Can anybody tell me what's the reason.I am sending u the code.
Call Method grid1->set_table_for_first_display
Exporting I_Structure_name = 'T_FINAL_OUT'
Changing it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
Exceptions
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
Please respond to this mail
Thanks,
Gopi.Hi Ashish,
I tried like what u told. but its not working.
I am sending u the complete code.
My only doubt is regarding Container does i need to crerate a conatiner .I created a custome control also but same problem
Data : grid1 type ref to cl_gui_alv_grid,
g_custom_container type ref to cl_gui_custom_container,
i_FCAT TYPE LVC_T_FCAT,
i_FCAT_str type lvc_s_fcat,
Structure for layout
i_layout_s TYPE lvc_s_layo,
i_lvccat TYPE lvc_t_fcat,
INITIALIZATION of Fields
Initialization.
v_repid = sy-repid.
set screen '101'.
MODULE STATUS_0101 output.
if g_custom_container is initial .
create object g_custom_container
Exporting
Container_name = 'CCCONTAINER'
Exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
Others = 5.
If sy-subrc <> 0.
ENDIF.
Create Object grid1
Exporting
I_Parent = g_custom_container
Exceptions
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
Others = 5.
If sy-subrc <> 0.
ENDIF.
Start-OF-Selection
i_FCAT_str-col_pos = 1.
i_FCAT_str-fieldname = 'MATNR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-seltext = Text-024.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 2.
i_FCAT_str-fieldname = 'GJAHR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-seltext = Text-012.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 3.
i_FCAT_str-fieldname = 'PERIO'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-seltext = Text-013.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 4.
i_FCAT_str-fieldname = 'LIFNR_ND1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-seltext = Text-014.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
if not grid1 is Initial.
If sy-SUBRC = 0.
Call Method grid1->set_table_for_first_display
Exporting
I_STRUCTURE_NAME = 'I_FCAT'
IS_LAYOUT = i_layout_s
Changing it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
Exceptions
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
ENDIF.
Else.
if g_custom_container is initial .
create object g_custom_container
Exporting
Container_name = 'CCCONTAINER'
Exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
Others = 5.
If sy-subrc <> 0.
ENDIF.
Create Object grid1
Exporting
I_Parent = g_custom_container
Exceptions
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
Others = 5.
If sy-subrc <> 0.
ENDIF.
Call Method grid1->set_table_for_first_display
Exporting
I_STRUCTURE_NAME = 'I_FCAT'
IS_LAYOUT = i_layout_s
Changing it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
Exceptions
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
Endif.
ENDIF.
Thanks,
Gopi. -
ALV grid using classes(displaying subtotals groupwise in ALV grid control)
Hello ,
please can any body help me its urgent tome.
displaying subtotals groupwise ..say for ex..
cost group costelement amount
10 101 100.00
10 102 200.00
10 103 300.00
20 104 400.00
20 105 500.00
20 106 600.00
101 100.00
102 200.00
103 300.00
10 600.00
104 400.00
105 500.00
106 600.00
20 1500.00
In ALV grid control using classes.
Thanks in AdvanceHi alson,
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
<b>CALL METHOD grid1->set_table_for_first_display
EXPORTING IS_LAYOUT = it_LAY
CHANGING it_fieldcatalog = fieldcat
it_sort = it_sort
it_outtab = itab[].</b>
ENDIF.
ENDMODULE. " PBO OUTPUT
keep the below code
<b>CALL METHOD grid1->set_table_for_first_display
EXPORTING IS_LAYOUT = it_LAY
CHANGING it_fieldcatalog = fieldcat
it_sort = it_sort
it_outtab = itab[].</b>
here
IF pdel = 'X'.
*BEGIN OF CHANGES BY VINAY DASARI
PERFORM get_data.
<b>CALL METHOD grid1->set_table_for_first_display
EXPORTING IS_LAYOUT = it_LAY
CHANGING it_fieldcatalog = fieldcat
it_sort = it_sort
it_outtab = itab[].</b>
ENDIF. -
Dynamic ALV Grid is not displaying !!
Hi all,
I am trying to create dynamic alv grids and upto five levels(five grids) out put is displaying fine without any problem. But when I try to display the 6th grid, the program is going into infinite loop and getting timed out. Even I tried to increse the height of the grid even though it is not displaying.
Please correct me if any thing is wrong in below code.
*1st Level grid
IF <table1> IS ASSIGNED AND <table1> IS NOT INITIAL.
CREATE OBJECT ob_split1
EXPORTING
parent = ob_custom
orientation = cl_gui_easy_splitter_container=>orientation_vertical.
PERFORM set_split_height USING ob_split1 '20'.
CREATE OBJECT ob_grid1
EXPORTING
i_parent = ob_split1->top_left_container.
ELSE.
CREATE OBJECT ob_split1
EXPORTING
parent = ob_custom
orientation = cl_gui_easy_splitter_container=>orientation_vertical.
PERFORM set_split_height USING ob_split1 '0'.
ENDIF.
*2nd Level grid
IF <table2> IS ASSIGNED AND <table2> IS NOT INITIAL.
CREATE OBJECT ob_split2
EXPORTING
parent = ob_split1->bottom_right_container
orientation = cl_gui_easy_splitter_container=>orientation_vertical.
PERFORM set_split_height USING ob_split2 '20'.
CREATE OBJECT ob_grid2
EXPORTING
i_parent = ob_split2->top_left_container.
ELSE.
CREATE OBJECT ob_split2
EXPORTING
parent = ob_split1->bottom_right_container
orientation = cl_gui_easy_splitter_container=>orientation_vertical.
PERFORM set_split_height USING ob_split2 '0'.
ENDIF.
(Created 3rd,4th,5th same like above).
*6th Level grid
IF <table6> IS ASSIGNED AND <table6> IS NOT INITIAL.
CREATE OBJECT ob_split6
EXPORTING
parent = ob_split5->bottom_right_container
orientation = cl_gui_easy_splitter_container=>orientation_vertical.
PERFORM set_split_height USING ob_split6 '20'.
CREATE OBJECT ob_grid6
EXPORTING
i_parent = ob_split6->top_left_container.
ELSE.
CREATE OBJECT ob_split6
EXPORTING
parent = ob_split5->bottom_right_container
orientation = cl_gui_easy_splitter_container=>orientation_vertical.
PERFORM set_split_height USING ob_split6 '0'.
ENDIF.
Appreciated your reply. Please let me know for additional info.
Thanks,
Ranjith.
Edited by: Thomas Zloch on Dec 8, 2010 5:44 PM - please use code tagsHi romanch,
defining the field catalog you must reference all currency fields to the respective currency key field (type CUKY).
<alv_fieldcat>-cfieldname = 'HWAER'.
This is sample for alv output of a currency field. The alv structure has a field HWAER which carries the currency key, e.g. USD or so.
Obviously you do not provide a cutrrency key for your values. If they are initial (zero), ALV will not display them as 0,00 but leave the field empty if the reference too currency key is not established.
If you define a DDIC structure for the ALV output this refernce is enforced. You can pass the DDIC structure name to the ALV and don not have to create the field catalog manually.
Regards,
Clemens -
Changing field catalog of ALV grid after first display (was: "ALV GRID")
Dear experts!
I am using CL_GUI_ALV_GRID to display an ALV, whose fieldcatalog has 5 fields (FIELD1, FIELD2, FIELD3, FIELD4 and FIELD5).
I am setting "NO_OUT = 'X' " to the fields FIELD3 and FIELD5 in the fieldcatalog before call the method SET_TABLE_FOR_FIRST_DISPLAY.
If a specific event occurs on the screen, I would like to set "NO_OUT = 'X'" to the fields FIELD2 and FIELD4 and I would like to set the "NO_OUT = ''" to the fields and FIELD3 FIELD5. This should happen at runtime after the method call "SET_TABLE_FOR_FIRST_DISPLAY".
I've tried using the method SET_FIELDCATALOG, but it is private.
Does anyone have any idea how to solve this problem?
Thank you very much!
Rubens
Edited by: Thomas Zloch on Aug 22, 2011 3:49 PM - subject correctedHi
Try to use the method SET_FRONTEND_FIELDCATALOG (it'll call private method SET_FIELDCATALOG)
Max -
New ALV Grid Field not Displaying?
I revised a report to have a new column. So I added this new field to the code.
I see the field and the value when I call
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
Bbut the field I added does not display.
Thank-you.Hi,
Please ensure that you added the related logic in the FIELD CATALOG of the ALV.
Regards,
Nirmal -
'TOTAL' text display in ALV GRID output
Hi,
My requirement is to display 'TOTAL' text at the end of the ALV report alongwith Totals for the respective columns.
I've used Classical method(i.e. used ALV GRID FM) to display the report.
For Totals I've used 'DO_SUM', option and for text populated 'TOTALS_TEXT' field, but still its not showing the desired text.
I've tried most of the solutions provided on SDN, and they are not working.
So, plssss help me to find out correct solution.
Thanks in Advance!!!!!!
Thanks & regards,
Amithi,
i hope this code will exactli fulfil ur requirement.
type-poolS: slis.
TYPES: BEGIN OF S_TAB,
F1 TYPE CHAR5,
F2 TYPE I,
F3 TYPE I,
END OF S_TAB.
TYPES: BEGIN OF sf_TAB,
f0 type char10,
F1 TYPE CHAR5,
F2 TYPE I,
F3 TYPE I,
END OF Sf_TAB.
DATA: IT_TAB TYPE TABLE OF S_TAB,
WA_TAB TYPE S_TAB,
IT_FIN TYPE TABLE OF Sf_TAB,
WA_FIN TYPE Sf_TAB.
data: fcat type slis_t_fieldcat_alv,
wa_fcat type slis_fieldcat_alv,
layout type slis_layout_alv,
it_sort type SLIS_T_SORTINFO_ALV,
wa_sort type SLIS_SORTINFO_ALV.
FREE IT_TAB. CLEAR WA_TAB.
WA_TAB-F1 = 'A1'.
WA_TAB-F2 = '10'.
WA_TAB-F3 = '20'.
APPEND WA_TAB TO IT_TAB.
CLEAR WA_TAB.
WA_TAB-F1 = 'A1'.
WA_TAB-F2 = '10'.
WA_TAB-F3 = '20'.
APPEND WA_TAB TO IT_TAB.
CLEAR WA_TAB.
WA_TAB-F1 = 'A2'.
WA_TAB-F2 = '15'.
WA_TAB-F3 = '30'.
APPEND WA_TAB TO IT_TAB.
CLEAR WA_TAB.
WA_TAB-F1 = 'A3'.
WA_TAB-F2 = '15'.
WA_TAB-F3 = '40'.
APPEND WA_TAB TO IT_TAB.
CLEAR WA_TAB.
WA_TAB-F1 = 'A3'.
WA_TAB-F2 = '20'.
WA_TAB-F3 = '60'.
APPEND WA_TAB TO IT_TAB.
CLEAR WA_TAB.
LOOP AT IT_TAB INTO WA_TAB.
wa_fin-f0 = 'Total'.
wa_fin-f1 = wa_tab-f1.
wa_fin-f2 = wa_tab-f2.
wa_fin-f3 = wa_tab-f3.
append wa_fin to it_fin.
clear wa_fin.
ENDLOOP.
Define Imacro.
wa_fcat-fieldname = &1.
wa_fcat-tabname = &2.
wa_fcat-reptext_ddic = &3.
wa_fcat-col_pos = &4.
WA_FCAT-DO_SUM = &5.
WA_FCAT-NO_OUT = &6.
append wa_fcat to fcat .
clear wa_fcat.
end-of-definition.
imacro 'F0' 'it_fin' '' '1' '' 'X'.
imacro 'F1' 'it_fin' 'PO Document' '2' '' ''.
imacro 'F2' 'it_fin' 'TOTAL' '3' 'X' ''.
imacro 'F3' 'it_fin' 'Space' '4' '' ''.
****************DEFINE LAYOUT
layout-zebra = 'X'.
layout-colwidth_optimize = 'X'.
layout-no_totAlLine = 'X'.
WA_SORT-SPOS = 1.
WA_SORT-fieldname = 'F0'.
wa_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_GRID_TITLE = 'SALES ORDER DETAILS'
IS_LAYOUT = layout
IT_FIELDCAT = fcat
IT_SORT = IT_SORT
TABLES
T_OUTTAB = IT_FIN
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Cheers,
Rudhir -
Hi all,
I have a subscreen with ALV grid in module pool program.
The main screen has two subscreens (one is header and other is items/reports)
from the main screen, the ALV Grid subscreen can be called in two ways.
1. from application tool bar (show report button) - ALV grid will be displayed in Items/Reports subscreen.
2. In Items/Reports subscreen, while displaying items there is a requirement to display same ALV grid subscreen report on hotspot of particular item.
ALV Grid in subscreen displaying only first come first serve for subscreen, if the subscreen called from application toolbar button then the ALV grid from items hotspot call not displaying and vice versa.
Not sure where i am doing wrong, but if i free the container, alv and re-generate all the objects its working fine but user doesn't like the flickering display of conatiner when it re-generating.
Any suggestions would help.
Regards
SyedHi Aruna Kumara,
Thanks for the reply.
I have only one ALV grid instance.
Process Flow from Application toolbar
Main Screen: 100
PBO:
CALL SUBSCREEN C_REPORT INCLUDING SY_REPID '0300'.
SUBSCREEN: 300
PBO:
IF CONTAINER IS NOT BOUND.
CREATE Container. with container name
CREATE ALV_Grid. passing container created
BUILD FIELDCAT.
CREATE EVENTS.
CALL METHOD SET_DISPLAY_TABLE_FIRST.
ELSE.
REFRESH_TABLE_DISPLAY.
FLUSH. "tried with without flush too.
ENDIF.
Process Flow from Items:
Items table is a subscreen 200 in main screen.
When the desired item click thru hotspot, a Modal dialog screen 250 open with subscreen element.
In event hotspot_click.
CALL SCREEN 250 STARTING AT ...ENDING AT.
PBO of 250:
CALL SUBSCREEN C_REPORT INCLUDING SY-REPID '0300'.
SubScreen 0300:
PBO as describe above, as the container already bound next time it refreshes the table display. But i see a blank screen in Popup.
Hope this helps.
Regards
Syed -
Getting present display records or Row Id's information in ALV grid?
Hi,
I am using REUSE_ALV_GRID_DISPLAY for ALV display.
I need to get the row id's when user filter the records with any conditions - or any other ways if he selected particular records - I need to process my logic only for those present displaying records in ALV grid.
So How do I can get preset display records in ALV grid or Present display records row id's ?
Please let me know .
And also I am using
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_repid = i_repid
e_grid = lt_grid
In lt_grid there is a table MT_ROID this table is having selected row id's information but I could not read this table. I think this will work only OO ABAP and also method - get_selected_rows is also not working.
I highly appreciate your answers.
Thanks
KevinHallo,
Any ideas?
Thanks. -
Displaying the selected rows in ALV Grid output
Hi Experts,
I am developing one interactive ALV Grid report where user can process the selected records/rows from the ALV Grid output.
for displaying the ALV Grid, I have used the class CL_GUI_ALV_GRID class. I am working on ECC 6.0 system.
when I select any records/rows from output and then press any Application Toolbar button, PAI and then PBO modules of the screen gets executed as per the normal flow.
however After PBO, when same ALV output comes, all the selected/highlighted rows appear as unselected, that means I want to retain the ALV
rows selection during the round trip.
please advise.
Regards,
JageshHi,
Feiyun Wu is correct.
Get_selected_rows and set_selected_rows are the methods to be used .
Some code:
Note the sequence of code:
FORM set_gui_alv_grid_1 .
DATA: wa_layout TYPE lvc_s_layo ,
wa_print TYPE lvc_s_prnt .
DATA: it_sort TYPE lvc_t_sort ,
wa_sort TYPE LINE OF lvc_t_sort .
DATA: it_fieldcatalog TYPE lvc_t_fcat.
IF gui_custom_container_1 IS INITIAL .
CREATE OBJECT gui_custom_container_1
EXPORTING
container_name = 'GUI_CUSTOM_CONTAINER_1'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6 .
IF sy-subrc <> 0.
ENDIF.
PERFORM get_field_catalog
USING gc_log_group_1
CHANGING it_fieldcatalog .
CREATE OBJECT gui_alv_grid_1
EXPORTING i_parent = gui_custom_container_1.
CREATE OBJECT ob_event_receiver_1
EXPORTING log_group = gc_log_group_1 .
* registers the event handlers
SET HANDLER ob_event_receiver_1->handle_toolbar FOR gui_alv_grid_1 .
SET HANDLER ob_event_receiver_1->handle_user_command FOR gui_alv_grid_1 .
SET HANDLER ob_event_receiver_1->print_top_of_page FOR gui_alv_grid_1 .
SET HANDLER ob_event_receiver_1->hotspot_click FOR gui_alv_grid_1 .
wa_layout-cwidth_opt = abap_true .
* wa_layout-excp_fname = gc_excp_fname .
* wa_layout-ctab_fname = gc_ctab_fname.
* wa_layout-excp_led = abap_true .
CALL METHOD gui_alv_grid_1->set_table_for_first_display
EXPORTING
is_layout = wa_layout
is_print = wa_print
i_save = 'A'
is_variant = gs_disvariant_1
CHANGING
it_sort = it_sort
it_fieldcatalog = it_fieldcatalog
it_outtab = it_alv_grid_1.
ELSE .
CALL METHOD gui_alv_grid_1->refresh_table_display.
* Restore selections
CALL METHOD gui_alv_grid_1->set_selected_rows
EXPORTING
it_index_rows = ob_event_receiver_1->it_rows.
* Restore position
CALL METHOD gui_alv_grid_1->set_scroll_info_via_id
EXPORTING
is_col_info = ob_event_receiver_1->wa_col
is_row_no = ob_event_receiver_1->wa_roid.
ENDIF.
ENDFORM . "set_gui_alv_grid_1
Regards. -
Generic function displaying alv grid for undefined structure
Hi experts,
I'm doing my first steps on abap development (Totally noob).
I'm writing some little reports based on simple selections (1 or 2 tables).
In every report, I've defined a structure (internal table) that i'm displaying with an ALV Grid.
In every report, I need to create a catalog for my structure in order to make the alv grid working.
What I would like to do is :
Create a function that receives a undefined structure (for all my reports) as a parameter.
This function sould create the catalog for the coresponding structure and call the alv grid function to display the data's contained in this structure.
The goal is : In every report, I would like to use this function to show the selected data's without taking care of catalogs, alv grid, etc...
Is it possible ?
I really don't see how I can do that... Does anybody already tried something like that ?
Thank you for your help
Regards
QuentinHi,
In this method Pass the structure name-
CALL METHOD gh_grid->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME = "<- here pass the structure
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
IS_LAYOUT = "<-Layout variable if using layout
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_line[]
it_fieldcatalog = gt_fieldcat
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
Maybe you are looking for
-
ORA-06502: PL/SQL: numeric or value error: Bulk bind: Error in define
Hi All, Getting aforesaid error while executing a procedure. I have a procedure which takes 7 paramneters and have 13 IN OUT parameters. all the IN OUT parameters are PLSQL tables of number and varchar2. I Have checked there are no not null columns t
-
Hi, My pc running Vista crashed - memory dump blue screen - total failure to reboot. I retrieved all the directories I had data in and the Firefox program directory from the hard drive. I want to see if I can now retrieve the bookmarks from this dire
-
Is it normal for an Ipod I have had for 2 weeks to freeze 4 times out of the 8 times I have used it. I reset it each time but is that normal? It says I have the most updated software - I have I Tunes 7
-
Hi, everybody! I'm developing an ERP application on Designer 6i r4, made of multiple modules (e.g., "Global", "Sales", "Financial" etc.). Some elements of each module (e.g., "Business Functions") need to be available for use in the other ones. 1. Wha
-
How can i put two domains with IAS
Hi!! I have IAS in Win NT and i publish www.mycompany.com published with it, but now i want to publish other domain www.myproduct.com in the same machine and i dont know how because in the http.conf servername parameter i only can put one server, if