ALV list with count of the table

Dear all,
My requirement is i want display the output as alv list along with the count of the table .
i got the count but unable to diplay the below the list.
please suggest me.
Thanks& Regards,
RP

If you are using a custom control on the screen and then a custom container you can easily do this.
Create a screen(Size 200 x 240), place a custom control on the screen and make it to the max size 200 x 240. Now in the attributes of the custom control, check the Resizing option for both horizontal and vertical, with some minimum numbers there.
Now, your ALV grid automatically occupies all the space available on the screen irrespective of the size if the screen and you will have only one scroll bar.
Regards,
Ravi
Note - Please mark all the helpful answers

Similar Messages

ALV list with only 1 field

Hi guru's,
I want to create an ALV list with only a char255 field.
<all_table> contains data of sflight and is of type sflight(dynamically).
I want to show the data as one line.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
       EXPORTING
            tabname   = 'TPPARFIL'
            fieldname = 'LINE'
      TABLES
            dfies_tab = it_dfies.
READ TABLE it_dfies INDEX 1.
IF sy-subrc IS INITIAL.
MOVE-CORRESPONDING it_dfies TO wa_fieldcat.
wa_fieldcat-scrtext_s = 'Results:'.
    APPEND wa_fieldcat TO gt_fieldcat.
ENDIF.
t_output[] = <all_table>.
CALL FUNCTION 'LVC_TRANSFER_TO_SLIS'
       EXPORTING
            it_fieldcat_lvc = gt_fieldcat
       IMPORTING
            it_fieldcat_alv = it_fieldcat_alv.
PERFORM fill_alv_layout.
* Show list
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            i_callback_program = lv_repid
            i_grid_title       = sy-title
             is_layout          = gs_layout
            it_fieldcat        = it_fieldcat_alv[]
       TABLES
            t_outtab           = t_output
       EXCEPTIONS
            program_error      = 1
            OTHERS             = 2.
*&      Form fill_alv_layout
FORM fill_alv_layout.
    CLEAR: gs_layout.
    gs_layout-max_linesize         = 160.
    gs_layout-min_linesize         = 160.
    gs_layout-detail_initial_lines = 'X'.
    gs_layout-zebra                = 'X'.
    gs_layout-edit_mode            = 'A'.
    gs_layout-numc_sum             = 'X'.
    gs_layout-colwidth_optimize    = 'X'.
    gs_layout-window_titlebar      = sy-title.
    gs_layout-totals_only          = 'X'.
ENDFORM.                    " fill_alv_layout
When I run this it only gives an empty view of the fields with type char255.
Regards,
Wim

hi,
As per your code I think your internal table is empty. Please set debugger after internal table fill and check. If the data is there then please check your field catalog entry.
Regards,
Sachin

Here's how to do ALV (OO) with dynamic fcat, int table and editable data

Hi everybody
Here's a more useful approach to ALV grid with OO using dynamic table, data NOT from DDIC, dynamic FCAT and how to get changed lines from the grid when ENTER key is pressed.
It's really not too dificult but I think this is more useful than the ever present SFLIGHT methods from the demos.
This also defines a subclass of cl_gui_alv_grid so you can access the protected attributes / methods of that class.
You don't need to add the class via SE24 -- done fron this ABAP.
When you run it click Edit for the first time.
After editing data press ENTER and the break point should bring you into the relevant method.
Code developed on NW2004S trial version but also works on rel 6.40 on a "Real" system.
The code should work without any changes on any system >=6.40.
All you need to do is to create a blank screen 100 via SE51 with a custom container on it called CCONTAINER1.
The rest of the code can just be uploaded into your system using the SE38 upload facility.
When running the program click on the EDIT button to enable the edit functionality of the grid.
Change your data and when you press ENTER you should get the break-point where you can see the original table and changed rows.
This program is actually quite general as it covers Dynamic tables, building a dynamic fcat where your table fields are NOT in the DDIC, intercepting the ENTER key via using an event, and accessing the protected attributes of the cl_gui_alv_grid by defining a subclass of this class in the abap.
I've seen various questions relating to all these functions but none in my view ever answers the questions in a simple manner. I hope this simple program will answer all these and show how using OO ALV is actually quite easy and people shouldn't be scared of using OO.
Have fun and award points if useful.
Cheers
Jimbo.
<b>PROGRAM zdynfieldcat.
Simple test of dynamic ITAB with user defined (not ddic) fields
Build dynamic fcat
use ALV grid to display and edit.
*When edit mode set to 1 toolbar gives possibility of adding and
*deleting rows.
*Define subclass of cl_gui_alv_grid so we can use protected attributes
*and methods.
Add event handler to intercept user entering data and pressing the
*ENTER key.
When enter key is pressed get actual value of NEW table (all rows)
rather than just the changed data.
*use new RTTI functionality to retrieve internal table structure
*details.
Create a blank screen 100 with a custom container called CCONTAINER1.
James Hawthorne
include <icon>.
define any old internal structure NOT in DDIC
types: begin of s_elements,
       anyfield1(20) type c,
       anyfield2(20) type c,
       anyfield3(20) type c,
       anyfield4(20) type c,
       anyfield5(11) type n,
       end of s_elements.
types: lt_rows type lvc_t_roid.
Note new RTTI functionality allows field detail retrieval
at runtime for dynamic tables.
data:   wa_element type s_elements ,
        wa_data type s_elements,
        c_index type sy-index,
        c_dec2 type s_elements-anyfield5,
        wa_it_fldcat type lvc_s_fcat,
        it_fldcat type lvc_t_fcat,
        lr_rtti_struc TYPE REF TO cl_abap_structdescr,    "RTTI
        lt_comp TYPE cl_abap_structdescr=>component_table,"RTTI
        ls_comp LIKE LINE OF lt_comp,                     "RTTI
        zog like line of lr_rtti_struc->components,      "RTTI
        struct_grid_lset type lvc_s_layo,
        l_valid type c,
        new_table type ref to data.
field-symbols: <dyn_table> type standard table,
               <actual_tab> type standard table,
               <fs1> type ANY,
               <FS2> TYPE TABLE.
data: grid_container1 type ref to cl_gui_custom_container.
class lcl_grid_event_receiver definition deferred.
data: g_event_receiver type ref to lcl_grid_event_receiver.
data: ls_modcell type LVC_S_MODI,
      stab type ref to data,
      sdog type s_elements.      .
class lcl_grid_event_receiver definition.
public section.
    methods:
    handle_data_changed
         for event data_changed of cl_gui_alv_grid
             importing er_data_changed,
       toolbar for event toolbar of cl_gui_alv_grid
                 importing e_object
                           e_interactive,
      user_command for event user_command of cl_gui_alv_grid
                 importing e_ucomm.
endclass.
*implementation of Grid event-handler class
class lcl_grid_event_receiver implementation.
method handle_data_changed.
code whatever required after data entry.
various possibilites here as you can get back Cell(s) changed
columns or the entire updated table.
Data validation is also possible here.
perform check_data using er_data_changed.
endmethod.
Method for handling all creation/modification calls to the toolbar
method toolbar.
    data : ls_toolbar type stb_button.
Define Custom Button in the toolbar
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'EDIT' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Edit' to ls_toolbar-text.
    move icon_change_text to ls_toolbar-icon.
    move 'Click2Edit' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'UPDA' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Update' to ls_toolbar-text.
    move icon_system_save to ls_toolbar-icon.
    move 'Click2Update' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'EXIT' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Exit' to ls_toolbar-text.
    move icon_system_end to ls_toolbar-icon.
    move 'Click2Exit' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
endmethod.
method user_command.
    case e_ucomm .
      when 'EDIT'.          "From Tool bar
        perform set_input.
         perform init_grid.
      when 'UPDA'.          "From Tool bar
        perform refresh_disp.
        perform update_table.
      when 'EXIT'.          "From Tool bar
        leave program.
    endcase.
endmethod.
endclass.
class zcltest definition inheriting from cl_gui_alv_grid.
define this as a subclass so we can access the protected attributes
of the superclass cl_gui_alv_grid
public section.
methods: constructor, disp_tab.
endclass.
need this now to instantiate object
as we are using subclass rather than the main cl_gui_alv_grid.
class zcltest implementation.
METHOD constructor.
CALL METHOD super->constructor
        exporting i_appl_events = 'X'
           i_parent = grid_container1.
endmethod.
method disp_tab.
FIELD-SYMBOLS: <outtab> TYPE STANDARD TABLE.
break-point 1.
mt_outtab is the data table held as a protected attribute
in class cl_gui_alv_grid.
ASSIGN me->mt_outtab->* TO <outtab>. "Original data
do whatever you want with <outtab>
contains data BEFORE changes each time.
Note that NEW (Changed) table has been obtained already by
call to form check_data USING P_ER_DATA_CHANGED
         TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Entered data is in table defined by <fs2>
In this method you can compare original and changed data.
Easier than messing around with individual cells.
do what you want with data in <fs2> validate / update / merge etc
endmethod.
endclass.
data :
    ok_code like sy-ucomm,
    save_ok like sy-ucomm,
    i4 type int4,
Container Object [grid_container]
now created via method constructor
in the subclass zcltest.
Control Object [grid]
grid1 type ref to zcltest,
Event-Handler Object [grid_handler]
grid_handler type ref to lcl_grid_event_receiver.
start-of-selection.
call screen 100.
module status_0100 output.
now display it as grid
if grid_container1 is initial.
    create object grid_container1
        exporting
          container_name = 'CCONTAINER1'.
    create object grid1.
     break-point 1.
    create object grid_handler.
    set handler:
       grid_handler->user_command for grid1,
       grid_handler->toolbar for grid1,
       grid_handler->handle_data_changed for grid1.
perform create_dynamic_fcat.
perform create_dynamic_itab.
perform populate_dynamic_itab.
perform init_grid.
perform register_enter_event.
set off ready for input initially
i4 = 0.
call method grid1->set_ready_for_input
         exporting
           i_ready_for_input = i4.
endif.
endmodule.
module user_command_0100 input.
*PAI not needed in OO ALV anymore as User Commands are handled as events
*in method user_command.
*we can also get control if the Data entered and the ENTER is pressed by
*raising an event.
Control then returns to method handle_data_changed.
endmodule.
form create_dynamic_fcat.
get structure of our user table for building field catalog
Use the RTTI functionality
lr_rtti_struc ?= cl_abap_structdescr=>describe_by_data( wa_data ).
Build field catalog just use basic data here
colour specific columns as well
loop at lr_rtti_struc->components into zog.
c_index = c_index + 1.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = zog-name .
wa_it_fldcat-datatype = zog-type_kind.
wa_it_fldcat-inttype =   zog-type_kind.
wa_it_fldcat-intlen =    zog-length.
wa_it_fldcat-decimals = zog-decimals.
wa_it_fldcat-lowercase = 'X'.
if c_index eq 2.
wa_it_fldcat-emphasize = 'C411'.
     endif.
    if c_index eq 3.
wa_it_fldcat-emphasize = 'C511'.
   endif.
append wa_it_fldcat to it_fldcat .
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to field sysmbol.
Use dynamic field catalog just built.
call method cl_alv_table_create=>create_dynamic_table
             exporting
                it_fieldcatalog = it_fldcat
             importing
                ep_table        = new_table.
assign new_table->* to <dyn_table>.
endform.
form populate_dynamic_itab.
load up a line of the dynamic table
c_dec2 = c_dec2 + 11.
wa_element-anyfield1 = 'Tabbies'.
wa_element-anyfield2 = 'ger.shepards'.
wa_element-anyfield3 = 'White mice'.
wa_element-anyfield4 = 'Any old text'.
wa_element-anyfield5 = c_dec2.
append wa_element to <dyn_table>.
endform.
form check_data USING P_ER_DATA_CHANGED
           TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Get altered data back
ASSIGN   p_er_data_changed->mp_mod_rows TO <FS1>.
stab =       p_er_data_changed->mp_mod_rows.
ASSIGN STAB->* TO <FS2>.
LOOP AT <FS2> INTO sdog.
ALV grid display with altered data is now in <fs2>.
do any extra processing you want here
endloop.
now display new table
call method grid1->disp_tab.
endform.
form exit_program.
call method grid_container1->free.
call method cl_gui_cfw=>flush.
leave program.
endform.
form refresh_disp.
call method grid1->refresh_table_display.
endform.
form update_table.
The dynamic table here is the changed table read from the grid
after user has changed it
Data can be saved to DB or whatever.
loop at <dyn_table> into wa_element.
do what you want with the data here
endloop.
switch off edit mode again for next function
i4 = 0.
call method grid1->set_ready_for_input
      exporting
          i_ready_for_input = i4.
endform.
form set_input.
i4 = 1.
call method grid1->set_ready_for_input
     exporting
       i_ready_for_input = i4.
endform.
form switch_input.
if i4 = 1.
i4 = 0.
else.
i4 = 1.
endif.
call method grid1->set_ready_for_input
     exporting
       i_ready_for_input = i4.
endform.
form init_grid.
Enabling the grid to edit mode,
     struct_grid_lset-edit = 'X'. "To enable editing in ALV
     struct_grid_lset-grid_title = 'Jimbos Test'.
     call method grid1->set_table_for_first_display
       exporting
         is_layout           = struct_grid_lset
       changing
         it_outtab             = <dyn_table>
         it_fieldcatalog       = it_fldcat.
endform.
form register_enter_event.
call method grid1->register_edit_event
               exporting
                  i_event_id = cl_gui_alv_grid=>mc_evt_enter.
Instantiate the event or it won't work.
create object g_event_receiver.
set handler g_event_receiver->handle_data_changed for grid1.
endform.</b>

Hi there
IE7 doesn't give me the add new page option and I get 404 error when trying to access the "How to contribute" section.
I'll load up Firefox later (this browser usually works when IE7 doesn't always work properly).
I'll copy the stuff to the wiki when I've got the browser sorted out.
Cheers
jimbp

Pending Routing or BOM material list with material in MARA table

I want to tally the material codes in MARA table with the materials without routing and BOM . i.e. pending Routing or BOM material list with material in MARA table.
Before MRP run How we will get this list ?
Pl' give reply.
Thanks .
Regards.

Hi Kishore,
SAP does not have any standard reports to suite your requirement. What i would suggest is to take couple of data extract from table to validate.
1. First dowload all materials which should have "BOM" and "Routing". This you can do by extracting "MARC" table data where field "BESKZ = 'E' or 'X' ".
2. Now you can extract the data from "MAST" for BOM and "MAPL" for Routing details.
Now do VLOOK up in excel to find the mismatch data.
This can also be done by a customised program, which i dont think it is required since it is going to be used only once.
You could also try SQVI with table joins
Hope this helps...Reward your points if so,
Regards,
Prasobh

Printing ALV list with ADS (pdf printer) in non-english charset

Hello!
I have an issue about printing alv list with pdf printer in non-english charset. We have two printers. One for alv lists (SWINCF: Casc.Fonts SAPWIN Unicode) and one for pdf forms(adobe document service). I want to use one printer for any documents. But PDF printer prints non-english charset like ########.
What can I do ?

Hi, Roman!
I want to use PDF printer for both types of output. I have a dedicated java instance for ADS.
There is a device type for our Kyocera Printer. My pdf printer prints ALV list good exept russian charset.
It prints like #####

How to get iterator with out dragging the table?

Hi,
Kindly help me out in getting the iterator for a view object with out dragging it on to the JSF page.
Can we create bindings in the binding container with out dragging the table on to page.
Kindly come up with suggestions.
Thanks,
Phani

if i understud correclty. follow this
public String getit58Value() {
try
if(!this.isEmptyDescr())
DCBindingContainer dcBindings = (DCBindingContainer)getBindings();
DCIteratorBinding dcIterator = dcBindings.findIteratorBinding("CrmCntrl2View1Iterator"); // r u meaning something like this. // am accessing without drop in jspx page
System.out.println(""+dcBindings.getIterBindings());
Row row = dcIterator.getCurrentRow();
this.setEmptyDescr(false);
System.out.println(""+row.getAttribute("BuDesc"));
return (String)row.getAttribute("BuDesc");
and another one .
pagedef file . in bindings.
we can create bindings as we need.
but one suggestion. by default adf tak care its bindings . so time to ask what is usecase?

Need ALV LIST for displaying Dynamic Internal Tables

Hi Guys,
                 I have some thing like 2 Dynamic internal tables.
Say 1st Internal table will be filled based on some condition.
say 2nd table will be filled based on some condition.
When appending the 1st Internal table, if that internal table is filled it creates another internal table of same kind and continues so on until some condition.
In the same way when appending the 2nd Internal table, if that internal table is filled it creates another internal table of same kind and continues so on until some condition.
My requirement is I need to display all these Internal tables in the output.
The output should look something like
1st Internal Table
some gap
2nd Internal Table
some gap
so on...................
Is there any standard ALV List, to display all these Internal Tables in such a way.
Thanks,
Prasad.

Hi.
One thing more here is code which get 10 records from 2 tables and then show them in ALV.
first when u execute it will show data from ist table.
when u go back (F3) then it will sow data from 2nd table.
But if u want to show both ALV on the same screen then u will have to use screen programin and using class u will have to create container and then have to do it.
But as i above mentioned. that sample code is as below.
REPORT ztn_test LINE-COUNT 100.
data: itab_ref type ref to data.
data: hstr type lvc_title.
data: tabname like DD02T-TABNAME.
   tabname = 'MARA'. " First Table
create data itab_ref type standard table of (tabname).
field-symbols: <itab> type standard table.
assign itab_ref->* to <itab>.
select * UP TO 10 ROWS from (tabname) into corresponding fields of table <itab>.
perform showalv.
   tabname = 'KNA1'. " 2nd Table
create data itab_ref type standard table of (tabname).
"field-symbols: <itab> type standard table.
assign itab_ref->* to <itab>.
select * UP TO 10 ROWS from (tabname) into corresponding fields of table <itab>.
perform showalv.
form showalv.
" to show that data in alv
type-pools: slis.
data: myalv type ref to cl_gui_alv_grid,    "ALV Grid
        fieldcat type slis_t_fieldcat_alv,    "Field Catalog Table
        ls_fcat type slis_fieldcat_alv,       "Line of Field catalog.
        ls_heading type slis_listheader,      "Line of Heading.
        layout type slis_layout_alv,          "layout of ALV for Heading and Logo.
        event type slis_t_event,              "Event Raising to Display Heading.
        event_str type slis_alv_event.        "Event String.
type-pools: slis.
data: heading type slis_t_listheader.       "List Heading.
if heading[] is initial.
    ls_heading-typ = 'H'.
    ls_heading-info = 'HR: Master Data Change History'.
    append ls_heading to heading.
endif.
* ls_heading-typ = 'A'.
* ls_heading-info = ''.
* APPEND ls_heading TO heading.
*                          ALV DISPLAY                        *
*******Making Layout of ALV
layout-zebra = 'X'.
layout-colwidth_optimize = 'X'.
*Calling function to raise event to display heading and icon above ALV
call function 'REUSE_ALV_EVENTS_GET'
   exporting
     i_list_type           = 0
   importing
     et_events             = event[]
* EXCEPTIONS
*   LIST_TYPE_WRONG       = 1
*   OTHERS                = 2
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
******calling TOP_OF_PAGE Event
read table event with key name = 'TOP_OF_PAGE' into event_str.
if sy-subrc = 0.
    move: 'TOP_OF_PAGE' to event_str-form.
    modify event from event_str index sy-tabix.
endif.
**** Now use this Fuction to display ALV without any Screen Programming.
call function 'REUSE_ALV_GRID_DISPLAY'
   exporting
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                = ' '
*   I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = 'SAPLZFSL_HR_UTILS' "sy-cprog
*   I_CALLBACK_PF_STATUS_SET          = ' '
*   I_CALLBACK_USER_COMMAND           = ' '
*   I_CALLBACK_TOP_OF_PAGE            = ' '
*   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*   I_CALLBACK_HTML_END_OF_LIST       = ' '
     i_structure_name                  = tabname
*   I_BACKGROUND_ID                   = ' '
     i_grid_title                      = hstr   "Heading of ALV Grid.
*   I_GRID_SETTINGS                   =
     is_layout                         = layout
*   it_fieldcat                       = fieldcat[]
*   IT_EXCLUDING                      =
*   IT_SPECIAL_GROUPS                 =
*   IT_SORT                           =
*   IT_FILTER                         =
*   IS_SEL_HIDE                       =
     i_default                         = 'X'
     i_save                            = 'X'
*   IS_VARIANT                        =
     it_events                         = event[]
*   IT_EVENT_EXIT                     =
*   IS_PRINT                          =
*   IS_REPREP_ID                      =
*   I_SCREEN_START_COLUMN             = 0
*   I_SCREEN_START_LINE               = 0
*   I_SCREEN_END_COLUMN               = 0
*   I_SCREEN_END_LINE                 = 0
*   I_HTML_HEIGHT_TOP                 = 0
*   I_HTML_HEIGHT_END                 = 0
*   IT_ALV_GRAPHICS                   =
*   IT_HYPERLINK                      =
*   IT_ADD_FIELDCAT                   =
*   IT_EXCEPT_QINFO                   =
*   IR_SALV_FULLSCREEN_ADAPTER        =
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER           =
*   ES_EXIT_CAUSED_BY_USER            =
    tables
      t_outtab                          = <itab>
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.

ALV list -Runtime error using the Spreadsheet button(CTRL+SHIFT+F7)

Hi,
We are on ECC6.0.When ever I try to use the button 'Spreadsheet' (CTRLSHIFTF7) it gives me the following runtime error.It works fine if I use the export button.Also it works for ALV grid.Issue is only with ALV list.
Can you pelase advise waht could be the issue.
Thanks
Venkat
Runtime Errors         GETWA_NOT_ASSIGNED
Date and Time          08.06.2009 16:02:22
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_SALV_BS_TT_RESULT_TABLE====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32781).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
Trigger Location of Runtime Error
Program                                 CL_SALV_BS_TT_RESULT_TABLE====CP
Include                                 CL_SALV_BS_TT_RESULT_TABLE====CM00L
Row                                     165
Module type                             (METHOD)
Module Name                             GET_CELL_VALUE
Source Code Extract
Line
SourceCde
135
call method cl_alv_xslt_transform=>get_days_since_1900
136
exporting
137
i_date = l_date
138
receiving
139
e_num = attribute01.
140
141
elseif ls_attribute-s_dfies-inttype eq cl_abap_typedescr=>typekind_time. "Time
142
data:
143
l_time type t.
144
145
l_time = <l_data>.
146
147
call method cl_alv_xslt_transform=>get_isotime_from_inttime
148
exporting
149
i_value = l_time
150
receiving
151
e_value = value.
152
153
*... fill attribute01 with percent value of actual day
154
call method cl_alv_xslt_transform=>get_percent_of_act_day
155
exporting
156
i_time = l_time
157
receiving
158
e_num = attribute01.
159
160
elseif ls_attribute-s_dfies-inttype ca if_salv_bs_log_exp_operand=>c_numeric and
161
ls_attribute-s_dfies-convexit is initial.
162
case ls_attribute-s_dfies-reference_field_type.
163
when if_salv_bs_c_data=>reffieldtype_curr.
164
*... get iso value for currency value
>>>>>
call method cl_alv_xslt_transform=>get_isonum_from_intnum
166
exporting
167
i_value    = <l_data>
168
i_currency = <l_reference>
169
i_decimals = ls_attribute-s_dfies-decimals
170
importing
171
e_value    = l_isovalue.
172
173
when if_salv_bs_c_data=>reffieldtype_quan.
174
*... get iso value for quantity value
175
call method cl_alv_xslt_transform=>get_isonum_from_intnum
176
exporting
177
i_value    = <l_data>
178
i_unit     = <l_reference>
179
i_decimals = ls_attribute-s_dfies-decimals
180
importing
181
e_value    = l_isovalue.
182
183
when others.
184
*... get iso value for value

Hi Pinaki,
Thanks for your reply.
below is my code.
data: t_fieldcat type slis_t_fieldcat_alv,
        w_fieldcat like line of t_fieldcat,
        w_layout   type slis_layout_alv,
        t_sort     type slis_t_sortinfo_alv,
        w_sort     like line of t_sort,
        t_events   type slis_t_event,
        w_events   like line of t_events.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
       exporting
            i_structure_name   = 'ZSD_ORDERS'
            i_bypassing_buffer = 'X'
       changing
            ct_fieldcat        = t_fieldcat.
data: l_lines_fieldcat type i.
describe table t_fieldcat lines l_lines_fieldcat.
clear: w_fieldcat.:
w_fieldcat-col_pos = l_lines_fieldcat + 1.
w_fieldcat-datatype = 'QUAN'.
w_fieldcat-just = ' '.
w_fieldcat-do_sum = ' '.
w_fieldcat-fieldname = 'ZZSCLQTY'.
w_fieldcat-tabname = 'T_DATA'.
w_fieldcat-qfieldname = 'VRKME'.
w_fieldcat-seltext_s = text-a01.
w_fieldcat-seltext_m = text-a01.
w_fieldcat-seltext_l = text-a01.
append w_fieldcat to t_fieldcat.
Modify column headings
loop at t_fieldcat into w_fieldcat.
    case w_fieldcat-fieldname.
      when 'MATNR'.
        w_fieldcat-no_zero = 'X'.
      when 'ZZPRICECHECK'.
        w_fieldcat-reptext_ddic = text-l01.
      when 'KZWI5'.
        w_fieldcat-reptext_ddic = text-l02.
      when 'VBELN'.
        w_fieldcat-hotspot = 'X'.
      when 'BMENG'.
        w_fieldcat-do_sum = 'X'.
      when 'COUNTER'.
        w_fieldcat-do_sum = 'X'.
        w_fieldcat-reptext_ddic = text-l03.
      when 'OBJDE'.
        w_fieldcat-reptext_ddic = 'Obj ID'.
          endcase.
    modify t_fieldcat from w_fieldcat.
endloop.
Format output options
clear w_layout.
w_layout-colwidth_optimize    = 'X'.
w_layout-zebra                = 'X'.
w_layout-get_selinfos         = 'X'.
w_layout-detail_initial_lines = 'X'.
w_layout-group_change_edit    = 'X'.
Specify list processing events
w_events-name = 'TOP_OF_PAGE'.
w_events-form = 'TOP_OF_PAGE'.
append w_events to t_events.
Fit Add List Variant from Selection Screen               "003
clear: w_variant.
w_variant-report = sy-repid.
w_variant-variant = sp_vari.
end Fit02
call function 'REUSE_ALV_LIST_DISPLAY'
       exporting
            i_callback_program      = w_repid
            is_layout               = w_layout
            it_sort                 = t_sort
            i_callback_user_command = 'USER_COMMAND'
            is_variant              = w_variant
            i_save                  = 'A'
            it_fieldcat             = t_fieldcat[]
            it_events               = t_events[]
       tables
            t_outtab                = t_data.
endform.

How to display ALV list with more than 1 structure?

Hello everyone,
I am using REUSE_ALV_LIST_DISPLAY to generate a report that displays vendor/customer items with purchases/sales total. I have 2 internal table for this. For every vendor/customer i need a total table right after, this have a different structure. I cannot use REUSE_ALV_BLOCK_LIST_ as this is not capable of calculating the subtotal per currency and from the documentation it says do not use.
Any idea on how to proceed?
Thanks!

Call ALV list function module per table structure.
Closing this thread.

ALV list with empty data - What could have gone wrong?

Dear experts,
I'm currently working on some codes to display data (the tables involved really do contain data), but when the codes are executed, the ALV list does not contain any data in it (only the column headers are fine).
What could have gone wrong? I've been staring at the codes for hours now. Please help. Appreciate any help at all.
Displaying ALV data with REUSE_ALV_LIST_DISPLAY:
form display_alv_data .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
*     I_INTERFACE_CHECK              = ' '
*     I_BYPASSING_BUFFER             =
*     I_BUFFER_ACTIVE                = ' '
      I_CALLBACK_PROGRAM             = w_prog
*     I_CALLBACK_PF_STATUS_SET       = ' '
*     I_CALLBACK_USER_COMMAND        = ' '
*     I_STRUCTURE_NAME               =
*     IS_LAYOUT                      =
      IT_FIELDCAT                    = gt_field_cat[]
*     IT_EXCLUDING                   =
*     IT_SPECIAL_GROUPS              =
*     IT_SORT                        =
*     IT_FILTER                      =
*     IS_SEL_HIDE                    =
*     I_DEFAULT                      = 'X'
*     I_SAVE                         = ' '
*     IS_VARIANT                     =
*     IT_EVENTS                      =
*     IT_EVENT_EXIT                  =
*     IS_PRINT                       =
*     IS_REPREP_ID                   =
*     I_SCREEN_START_COLUMN          = 0
*     I_SCREEN_START_LINE            = 0
*     I_SCREEN_END_COLUMN            = 0
*     I_SCREEN_END_LINE              = 0
*     IR_SALV_LIST_ADAPTER           =
*     IT_EXCEPT_QINFO                =
*     I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
*   IMPORTING
*     E_EXIT_CAUSED_BY_CALLER        =
*     ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = gt_final
    EXCEPTIONS
      PROGRAM_ERROR                  = 1
      OTHERS                         = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " display_alv_data
Retrieving data from the database tables into the internal table:
form retrieve_data .
" For internal table 1
SELECT ekbe~ebeln
         mseg~mblnr
         ekbe~belnr
         ekbe~ebelp
         ekbe~matnr
         ekbe~menge
         ekbe~dmbtr
         ekbe~werks
         mseg~lgort
         mseg~lifnr
         lfa1~name1
FROM ekbe INNER JOIN mseg ON ekbe~ebeln = mseg~ebeln
            INNER JOIN lfa1 ON mseg~lifnr = lfa1~lifnr
INTO CORRESPONDING FIELDS OF TABLE gt_1
WHERE mseg~bwart = '101' AND      " Movement type: Goods Receipt
        ekbe~vgabe = '2' AND        " Transaction / event type for Invoice Verification Number
        ekbe~matnr IN s_m_num AND
        mseg~lifnr IN s_v_num.
" For internal table 2
SELECT ekbe~ebeln
         makt~maktx
         eket~eindt
FROM ekbe INNER JOIN makt ON ekbe~matnr = makt~matnr
            INNER JOIN eket ON ekbe~ebeln = eket~ebeln
INTO CORRESPONDING FIELDS OF TABLE gt_2
WHERE eket~eindt IN s_d_date.
" For internal table 3
SELECT ekbe~ebeln
         ekko~bedat
         ekko~ekorg
         ekko~ekgrp
         ekko~bukrs
FROM ekbe INNER JOIN ekko ON ekbe~ebeln = ekko~ebeln
INTO CORRESPONDING FIELDS OF TABLE gt_3
WHERE ekko~bedat IN s_p_date AND
        ekko~ekorg IN s_p_org AND
        ekko~ekgrp IN s_p_grp.
" For the final internal table
SORT: gt_1, gt_2, gt_3.
LOOP AT gt_1.
    MOVE-CORRESPONDING gt_1 TO gt_final.
    READ TABLE gt_2 WITH KEY gfs_ebeln = gt_1-gfs_ebeln BINARY SEARCH.
    MOVE-CORRESPONDING gt_2 TO gt_final.
    READ TABLE gt_3 WITH KEY gfs_ebeln = gt_1-gfs_ebeln BINARY SEARCH.
    MOVE-CORRESPONDING gt_3 TO gt_final.
    APPEND gt_final.
ENDLOOP.
endform.                    " retrieve_data

Dear forumers,
I apologize for the rather late reply. The SAP server that I've been working on was down since Thursday evening and I wasn't able to debug much into the codes. Nevertheless, I really do appreciate all of your inputs and help here.
Rob,
I've just debugged my codes again and found out that in the first place, there is no data contained in the internal table gt_1 at all. My rough guess is because I've misused the INNER JOIN wrongly here (see code comments below):-
SELECT ekbe~ebeln
         mseg~mblnr
         ekbe~belnr
         ekbe~ebelp
         ekbe~matnr
         ekbe~menge
         ekbe~dmbtr
         ekbe~werks
         mseg~lgort
         mseg~lifnr
         lfa1~name1 " this line should probably be commented out
FROM ekbe INNER JOIN mseg ON mseg~ebeln = ekbe~ebeln
                    INNER JOIN lfa1 ON lfa1~lifnr = mseg~lifnr   " this line should probably be commented out - the table join here is not based on table ekbe at all
INTO CORRESPONDING FIELDS OF TABLE gt_1
WHERE mseg~bwart = '101' AND
        ekbe~vgabe = '2' AND
        ekbe~matnr IN s_m_num AND
        mseg~lifnr IN s_v_num.
Next, I commented out certain lines further and found that there is still no data contained in the internal table gt_1 again, as follows:-
SELECT ekbe~ebeln
         mseg~mblnr
         ekbe~belnr
         ekbe~ebelp
         ekbe~matnr
         ekbe~menge
         ekbe~dmbtr
         ekbe~werks
         mseg~lgort
         mseg~lifnr
         " lfa1~name1
FROM ekbe INNER JOIN mseg ON mseg~ebeln = ekbe~ebeln
                    " INNER JOIN lfa1 ON lfa1~lifnr = mseg~lifnr
INTO CORRESPONDING FIELDS OF TABLE gt_1.
" WHERE mseg~bwart = '101' AND
        " ekbe~vgabe = '2' AND
        " ekbe~matnr IN s_m_num AND
        " mseg~lifnr IN s_v_num.
There should be data contained in table ekbe here. What could have really gone wrong now?

ALV list with 2 header lines

Dear gurus,
Need help in displaying ALV list report. the below report is an example of AR aging report. The report output is as below:
DEC
NOV
OCT
SEP
0-30
31-60
61-90
90+
xx
xx
xx
xx
SUBTOTAL
The first 2 lines are the list header. While the 'x' is the amount.
How can i display the above output with 2 header lines? I was thinking of using the REUSE_ALV_FIELDCATALOG_MERGE function. But it will have 2 lines of body row too. In fact, i only one one row in the body. But if i define the header lines manually, i would not able to do the subtotal at the end of the alv list. I need to have the subtotal too.
Thanks in advance!

Hi,
For this requirement you need to populate the fld catalog using row_pos and col_pos fields specifing proper position.
See this code snippet ..... this is only possible for ALV list.
TYPE-POOLS: slis.
DATA: ld_fieldcat    TYPE slis_fieldcat_alv.
DATA: t_alv_fieldcat TYPE STANDARD TABLE OF slis_fieldcat_alv.
DATA : it_fld TYPE slis_t_fieldcat_alv,
       wa_fld TYPE slis_fieldcat_alv.
data: BEGIN OF itab OCCURS 0,
        carrid    like sflight-carrid,
        connid    like sflight-connid,
        planetype like sflight-planetype,
        seatsmax like sflight-seatsmax,
      END OF itab.
START-OF-SELECTION.
SELECT carrid connid planetype seatsmax
       FROM sflight
       INTO TABLE itab.
CLEAR: ld_fieldcat.
ld_fieldcat-row_pos       = '1'.
ld_fieldcat-col_pos       = '1'.
ld_fieldcat-tabname       = 'ITAB'.
ld_fieldcat-fieldname     = 'CARRID'.
ld_fieldcat-ref_tabname   = 'SFLIGHT'.
ld_fieldcat-outputlen     = '10'.
APPEND ld_fieldcat TO t_alv_fieldcat.
CLEAR ld_fieldcat.
CLEAR: ld_fieldcat.
ld_fieldcat-row_pos       = '1'.
ld_fieldcat-col_pos       = '2'.
ld_fieldcat-tabname       = 'ITAB'.
ld_fieldcat-fieldname     = 'CONNID'.
ld_fieldcat-ref_tabname   = 'SFLIGHT'.
ld_fieldcat-outputlen     = '10'.
APPEND ld_fieldcat TO t_alv_fieldcat.
CLEAR ld_fieldcat.
CLEAR: ld_fieldcat.
ld_fieldcat-row_pos       = '2'.
ld_fieldcat-col_pos       = '1'.
ld_fieldcat-tabname       = 'ITAB'.
ld_fieldcat-fieldname     = 'PLANETYPE'.
ld_fieldcat-ref_tabname   = 'SFLIGHT'.
ld_fieldcat-outputlen     = '10'.
APPEND ld_fieldcat TO t_alv_fieldcat.
CLEAR ld_fieldcat.
CLEAR: ld_fieldcat.
ld_fieldcat-row_pos       = '2'.
ld_fieldcat-col_pos       = '2'.
ld_fieldcat-tabname       = 'ITAB'.
ld_fieldcat-fieldname     = 'SEATSMAX'.
ld_fieldcat-ref_tabname   = 'SFLIGHT'.
ld_fieldcat-outputlen     = '10'.
APPEND ld_fieldcat TO t_alv_fieldcat.
CLEAR ld_fieldcat.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      it_fieldcat        = t_alv_fieldcat[]
    TABLES
      t_outtab           = ITAB. "internal table
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Amitava

ALV List with checkboxes

Hello experts,
I'm working on an object where in I need to display an ALV List (using Funct Modules) with checkboxes.
When I select the checkboxes,and click on a button (Eg.Refresh Button) , I need to get all the details of the selected rows (checked rows) in a seperate ALV List (in a Dailog).
Could any one of u please suggest me about selecting the row which has been checked(Checkboxes in ALV ).
Thanks in advance.
Sanghamitra

Hi sangha,
1. To get a taste of it,
   just copy paste this program.
2. It will display alv (t001)
   It will show CHECKBOXES (besides every row)
   TICK some rows,
and DOUBLE-CLICK ON any row.
3. It will display all the row numbers which have been checked/ticked.
4.
report abc.
TYPE-POOLS : slis.
Data
DATA : BEGIN OF itab OCCURS 0.
        INCLUDE STRUCTURE t001.
DATA : flag tyPE c,
       END OF itab.
DATA : alvfc TYPE slis_t_fieldcat_alv.
DATA : alvly TYPE slis_layout_alv.
Select Data
SELECT * FROM t001 INTO TABLE itab.
*------- Field Catalogue
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
    i_program_name         = sy-repid
    i_internal_tabname     = 'ITAB'
    i_inclname             = sy-repid
CHANGING
    ct_fieldcat            = alvfc
EXCEPTIONS
    inconsistent_interface = 1
    program_error          = 2
    OTHERS                 = 3.
Display
alvly-box_fieldname = 'FLAG'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
    it_fieldcat             = alvfc
    i_callback_program      = sy-repid "<-------Important
    i_callback_user_command = 'ITAB_USER_COMMAND' "<------ Important
    is_layout               = alvly
TABLES
    t_outtab                = itab
EXCEPTIONS
    program_error           = 1
    OTHERS                  = 2.
CALL BACK FORM
FORM itab_user_command USING whatcomm TYPE sy-ucomm whatrow TYPE
slis_selfield.
data : msg(100) type c.
LOOP AT itab.
    if itab-flag = 'X'.
      msg = sy-tabix.
      condense msg.
      concatenate 'Row Number ' msg ' ' into msg
      separated by space.
      message msg type 'I'.
    endif.
ENDLOOP.
ENDFORM. "ITAB_user_command
regards,
amit m.

ALV LIST with few checkboxes fields

Hi everyone,
I want to create an ALV with 2 fields that are checkboxes.
I am succeeding to create an ALV with one checkbox field.
How do we do in order to create an ALV with 2 checkboxes fields using ALV LIST ?
I know that we have to specify in the layout of the ALV the name of the field we want it to be checkbox.
For example :
gs_layout-box_fieldname   = 'FLAG'.
But, how do we specify a second checkbox field ?
Thanks.
Regards.

Slight modification to my earlier post. this is with 2 checkboxes.
REPORT ztest_alv_checkbox.
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
      wa_cat LIKE LINE OF it_fcat.
DATA: BEGIN OF it_alv OCCURS 0,
       check1(1),
       check2(1),
       carrid LIKE sflight-carrid,
       connid LIKE sflight-connid,
      END OF it_alv.
DATA:it_events TYPE slis_t_event,
     wa_events LIKE LINE OF it_events.
SELECT carrid
       connid
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE it_alv
UP TO 20 ROWS.
wa_cat-fieldname = 'CHECK1'.
wa_cat-input = 'X'.
wa_cat-edit = 'X'.
wa_cat-checkbox = 'X'.
wa_cat-seltext_l = 'Check'.
wa_cat-tabname = 'IT_ALV'.
APPEND wa_cat TO it_fcat.
CLEAR wa_cat.
wa_cat-fieldname = 'CHECK2'.
wa_cat-input = 'X'.
wa_cat-edit = 'X'.
wa_cat-checkbox = 'X'.
wa_cat-seltext_l = 'Check'.
wa_cat-tabname = 'IT_ALV'.
APPEND wa_cat TO it_fcat.
CLEAR wa_cat.
wa_cat-fieldname = 'CARRID'.
wa_cat-seltext_l = 'Carrid'.
wa_cat-tabname = 'IT_ALV'.
APPEND wa_cat TO it_fcat.
CLEAR wa_cat.
wa_cat-fieldname = 'CONNID'.
wa_cat-seltext_l = 'Connid'.
wa_cat-tabname = 'IT_ALV'.
APPEND wa_cat TO it_fcat.
wa_events-name = slis_ev_end_of_list.
wa_events-form = 'MODIFY_LIST'.
APPEND wa_events TO it_events.
CLEAR wa_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
    i_callback_program = sy-repid
    it_fieldcat        = it_fcat
    it_events          = it_events
TABLES
    t_outtab           = it_alv
EXCEPTIONS
    program_error      = 1
    OTHERS             = 2.
IF sy-subrc NE 0.
ENDIF.
"After The list display i am modifying the report output
"using the END_OF_LIST event of ALV
"here conditionally i can make the cell input off
*&      Form MODIFY_LIST
*       text
FORM modify_list.
DATA: l_lines TYPE i,
        l_index TYPE i.
l_lines = l_lines + 3.
"because we have 3 lines extra occupied by lables.
"if we have header,i mean top of page add the no.of lines
"how many ever top of page have + 3 for labels.
DESCRIBE TABLE it_alv LINES l_lines.
l_lines = l_lines + 3.
"understnad this part alone.
DO l_lines TIMES.
    IF sy-index GT 3.
      l_index = sy-index - 3.
      READ TABLE it_alv INDEX l_index.
      "this is my condition..
      IF sy-subrc = 0 .
        IF it_alv-carrid <> 'AA'. "place your condition here.
          "accordingly you can disable the checkbox
          "use the below logic
          READ LINE sy-index INDEX sy-lsind.
          IF sy-subrc = 0.
            MODIFY LINE sy-index INDEX sy-lsind
                       FIELD FORMAT it_alv-check1 INPUT OFF
                                     it_alv-check2 INPUT OFF.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDIF.
ENDDO.
ENDFORM.                    "MODIFY_LIST

Those values which are there in the IN list but not in the table.

Hi All,
We have a table global_title_isbn having 18 columns with primary key on title_isbn. This table contains approx. 10 million rows.
Normally what we used to get was 10-15 comma seperated list of ISBNs for some business process , for them we have to check into the table to figure out what all ISBNs are not there in the table.
But now a days we are getting a list of more than 100 ISBNs and there are times when only less than 40 ISBNs exist in the table. So figuring out what all ISBN are not there in the given list is very tiresome job.
Is there any way using SQL we get list of only those ISBN which are not there in the table from the list,
eg
select * from global_title_isbn where title_isbn in ( a comma seperated list);
will give me those ISBNs which are there in the global_title_isbn and in the given list..
Desired O/P
a list of ISBN which are there in the given list but do not exist in the table.
PS:-- I have only read access . I cannot create any table/view etc and PLSQL stored procedure.....
Regards
Vineet

I see no problem with my solution.
See examples below:
create table global_title_isbn (title_isbn varchar2(10));
insert into global_title_isbn values ('8888888');
commit;
-- your_string is '9999999','8888888','17262','19283263','328732'
select rtrim(ltrim(extractvalue(list_isbn.column_value,'e'), ''''), '''') as title_isbn
from table(xmlsequence
              (extract
                (xmltype('<coll><e>' ||replace(:your_string, ',', '</e><e>') ||'</e></coll>')
              , '/coll/*') )
            ) list_isbn
where not exists (select 1
                     from global_title_isbn gt
                    where gt.title_isbn = rtrim(ltrim(extractvalue(list_isbn.column_value,'e'), ''''), ''''));
output:
9999999
17262
19283263
328732
drop table global_title_isbn;
create table global_title_isbn (title_isbn number(10))
insert into global_title_isbn values (8888888);
commit;
-- your_string is '9999999','8888888','17262','19283263','328732'
select rtrim(ltrim(extractvalue(list_isbn.column_value,'e'), ''''), '''') as title_isbn
from table(xmlsequence
              (extract
                (xmltype('<coll><e>' ||replace(:your_string, ',', '</e><e>') ||'</e></coll>')
              , '/coll/*') )
            ) list_isbn
where not exists (select 1
                     from global_title_isbn gt
                    where gt.title_isbn = rtrim(ltrim(extractvalue(list_isbn.column_value,'e'), ''''), ''''));
output:
9999999
17262
19283263
328732

Dynamic ALV: but with globally available dynamic table type

Hello,
I would like to create a dynamic node for a ALV and dynamic table types to fill and the ALV.
The ALV data can be changed so I need to read it again.
I have read all the threads about dynamic node create and i have no problem with it. I can create a structure and a table dynamically. thats also no issue for me.
But. I fill the ALV data in a method and read it in another method to save the changes in a data base table.
Thats also no problem
So where i need your help? I currently create the dynamic table and structure in both methods. That works, but why do the same thing twice?
I cant figure out by myself how to create a dynamic table/structure in a global way, so the dynamic table/structure is created once and then available in the whole WD4A view.
I tried is with a class type in se24 with reference to CL_ABAP_STRUCTDESCR but I cant make that run, because to access the type I created an attribute in se24 with reference to the class type that I now try in instance and fill in the method. But ABAP thinks that my attribute is not compatible anymore.
Any idea how to make a dynamic table globally available? That must be an ABAP god who can answer this question, hehe. So imagin me falling on my knees for the one who has an answer that really works
Kind regards,
Hendrik

This doesn't seem too difficult really. For a dynamic table you just need to declare the internal table as TYPE REF TO DATA.
Just more this declaration to the attributes of your Component Controller. So for instance in my component controller I have an attribute called i_data with the RefTo column checked and the associated type = DATA.
So now I could do the following:
create data wd_this->idata type table of (tablename).
Or however you are dynamically creating the table - maybe with TYPE HANDLE instead.
The point is that your dynamic table is now global to your entire component and you can read and write to it from different methods.
Is this what you were looking for? Without knowing more about your existing coding, it is difficult to say more.

ALV list with count of the table

Similar Messages

Maybe you are looking for