ALV report display online and generate in spool

Dear expert,
I have created an ALV report. I want to run this report online. After executed, the report is displayed. After display this report, I also want to generate the output report in the spool. Is there any way to do this? Thank you.
I have tried to use submit...to SAP Spool. in this way, it will generate the spool, but it will not display the report online. I want it both display online and generate a spool.

well forget yout the new-page print on thingie, since you use ALV.
if you had a write list this trick would be cool since you just could do following:
Do 2 times.
if sy-index GT 1.
    new page print on.
endif.
loop at itab into wa.
    write stuff....
endloop.
if sy-index GT 1.
    new page print off.
endif.
enddo.
/edit arrrgh forgot to write further...
with your ALV you could process a write list as well after displaying but you will have layout differences between your display and your spool then and i dont think that this is what you want/need.
you could however after display process your programm a second time, in background task and give it a printer where to print to. Since ALV wont get executed in background task you will get a spool instead.
Edited by: Florian Kemmer on Sep 15, 2010 2:40 PM

Similar Messages

Regarding running a report in background and generate spool

Hi,
I am developing a report [<b>REPORT1</b>].
It is taking long to execute if data is more.
Now i want to schedule this report in background and generate spool along with.
So once i execute REPORT1 it should run in background & generate spool?
Can anybody give inputs for the same!
Thanks,
Deep.

Hi,
to generate spool, use below code
FORM create_spool .
CONSTANTS : l_c_device(4) VALUE 'LOCL'.
Create Spool Request
NEW-PAGE PRINT ON
LINE-SIZE 120
DESTINATION l_c_device
IMMEDIATELY ' '
KEEP IN SPOOL 'X'
NEW LIST IDENTIFICATION 'X'
NO DIALOG.
ENDFORM. " create_spool
And after createing spool to get the spool number use below code,
FORM obtain_spool_id .
TYPES : BEGIN OF t_tsp01,
rqident TYPE tsp01-rqident,
rqowner TYPE tsp01-rqowner,
END OF t_tsp01.
DATA : it_tsp01 TYPE STANDARD TABLE OF t_tsp01,
wa_tsp01 LIKE LINE OF it_tsp01.
SELECT rqident
rqowner
FROM tsp01
INTO TABLE it_tsp01
WHERE rqowner = sy-uname.
SORT it_tsp01 BY rqident DESCENDING.
READ TABLE it_tsp01 INTO wa_tsp01 INDEX 1.
IF sy-subrc = 0 .
v_spool_nr = wa_tsp01-rqident.
ENDIF.
Capture the immediate spool created for this report
v_spool_nr = sy-spono.
ENDFORM. " obtain_spool_id
<b>Reward points</b>
Regards

Running the alv report in background and sending it thro email

hi,
      i have to run the alv report in background and send the output through email

Hi
Many a times there is a requirement to display ALV Grid (not ALV List) in the background Job. I have checked the SDN Forum for the same and it has been mentioned that ALV Grid cannot be displayed in Background, but the list output of ALV is possible. So user wont have the actual Grid interface but the List interface.
There is a workaround to display ALV Grid in Background Job. The only restriction is you cant schedule the job through SM36. You need to execute the transaction of the report program, fill in the selection screen data and hit Execute.
The job would be executed in background. User will be able to see the Job Log and Job Status after executing the program. User doesnt have to go to SM37 to view the job status/log. Once the Job Status is changed to COMPLETED, user can click on DISPLAY SPOOL to view the ALV Grid.
Limitations:
Cant schedulea background job
The session should be active until the background job is completed. If the session is closed, then user wont be able to check the output in ALV Grid. User would be able to check the output through spool or SM37
Advantages:
If the spool width is greater than 255 characters, then the entire width could be seen in the output because the output is directed to an ALV Grid and not to spool
Interface of ALV Grid is available instead of ALV List even though its a background job.
Program wont give the TIME OUT error
Steps Required:
1. Once you execute the program, the following screen would be displayed
2. Click Display Job Status to check the Status of the Background Job
3. Click on Display the Job Log to check the Log
4. Click on Display Job Status to check the Job Status
5. Click on DISPLAY SPOOL to check the spool content once the Job Status is changed to COMPLETED. Output is displayed in ALV Grid
Programs:
1. Two different programs needs to be created
ZPROGRAM_ONE: This is the 1st program, where the selection screen and all the data validations would be done. Error handling for invalid data should be done in this program.
Once the data validation is done, this program would call the 2nd program ZPROGEAM_TWO. Build the logic to display ALV Grid in this program. The logic will only display ALV in foreground and it wont be reflected in the spool.
ZPROGRAM_TWO: This program would fetch all the data and do all the processing. If you want the spool output along with ALV Grid output, then build the logic in this program to display ALV Grid.
*& Report ZPROGRAM_ONE                                                *
REPORT zprogram_one                            .
PRASHANT PATIL
TABLES : mara,
         tsp01.
type-pools:slis.
TYPES : BEGIN OF t_mara,
          matnr   TYPE mara-matnr,
          ersda   TYPE mara-ersda,
          ernam   TYPE mara-ernam,
          laeda   TYPE mara-laeda,
        END OF t_mara.
DATA : i_mara       TYPE STANDARD TABLE OF t_mara,
       wa_mara      TYPE t_mara,
       wa_index     TYPE indx,        " For Index details
       wa_index_key TYPE indx-srtfd VALUE 'PRG_ONE',
       i_jobsteplist     TYPE STANDARD TABLE OF tbtcstep, " For spool number
       wa_params         TYPE pri_params, " To Get Print Parameters
       wa_jobhead        TYPE tbtcjob,     " To know the status of job
       wa_jobsteplist    TYPE tbtcstep,    " To know the spool
       w_jobname         TYPE tbtco-jobname, " Job name for bckgrnd job
       w_jobcount        TYPE tbtco-jobcount, " Unique id for bckgrd job
       w_path            TYPE string,         " Upload path
       w_lsind           TYPE sy-lsind,       " Index
       wa_seltab         TYPE rsparams,
       i_seltab          TYPE STANDARD TABLE OF rsparams,
       wa_index1         TYPE indx,        " For Index details
       wa_index_key1     TYPE indx-srtfd VALUE 'PRG_TWO',
       i_fieldcat        TYPE slis_t_fieldcat_alv,
       wa_fieldcat       LIKE LINE OF i_fieldcat.
        CONSTANTS DECLARATION                                        *
CONSTANTS :
         c_a(1) TYPE c VALUE 'A',
         c_m(1) TYPE c VALUE 'M',
         c_l(1) TYPE c VALUE 'L',
         c_c(1) TYPE c VALUE 'C',
         c_zfdr(4) TYPE c VALUE 'ZFDR',
         c_x(1)    TYPE c VALUE 'X',
         c_locl(4) TYPE c VALUE 'LOCL', " Destination is LOCAL
         c_f(1)    TYPE c VALUE 'F',   " Job Status - Failed
         c_s(1)    TYPE c VALUE 'S',
         c_p(1)    TYPE c VALUE 'P'.
SELECTION SCREEN PARAMETERS
SELECT-OPTIONS : s_matnr FOR mara-matnr.
START-OF-SELECTION.
Before the export, fill the data fields before CLUSTR
wa_index-aedat = sy-datum.
wa_index-usera = sy-uname.
EXPORT s_matnr
       TO DATABASE indx(st) FROM wa_index ID wa_index_key.
To Open the Job for background processing
PERFORM open_job.
To get the print parameters
PERFORM get_print_parameters.
Submit the job in background
PERFORM job_submit.
Close the background job
PERFORM job_close.
This is the output screen with the buttons ********
Create 3 buttons DISPLAY SPOOL, STATUS, JOBLOG
SET PF-STATUS 'ZS001'.
WRITE: / 'The program is submitted in Background'.
WRITE: / 'Press DISPLAY SPOOL to see the spool'.
WRITE: / 'Press STATUS to see the status of the background'.
AT USER-COMMAND.
If user presses the 'BACK' button
IF sy-ucomm = 'BAK'.
    IF wa_jobhead-status = c_f OR
        wa_jobhead-status = c_a.
      LEAVE TO SCREEN 0.
    ENDIF.
ENDIF.
If the user presses the 'DISPLAY SPOOL' Button
IF sy-ucomm = 'DISPLAY'.
    PERFORM display_spool.
ENDIF.
If the user presses the 'JOB STATUS' Button
IF sy-ucomm = 'STATUS'.
    PERFORM display_status.
ENDIF.
If the user presses the 'JOB LOG' Button
IF sy-ucomm = 'JOBLOG'.
    PERFORM display_job_log.
ENDIF.
*&      Form open_job
      text
--> p1        text
<-- p2        text
FORM open_job .
This is to Create a new job which is to be submitted in background to
process sales order/delivery/invoice
Here we would get a unique id ( Jobcount ) which identifies our job
along with the job name which we have assigned to our job
CONCATENATE sy-uname
              sy-datum
              sy-uzeit
                      INTO w_jobname . " Assign unique jobname
CALL FUNCTION 'JOB_OPEN'
   EXPORTING
DELANFREP              = ' '
JOBGROUP               = ' '
    jobname                = w_jobname
SDLSTRTDT              = NO_DATE
SDLSTRTTM              = NO_TIME
JOBCLASS               =
IMPORTING
   jobcount                = w_jobcount
CHANGING
RET                    =
EXCEPTIONS
   cant_create_job        = 1
   invalid_job_data       = 2
   jobname_missing        = 3
   OTHERS                 = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " open_job
*&      Form get_print_parameters
      text
--> p1        text
<-- p2        text
FORM get_print_parameters .
DATA : l_valid TYPE c.
This is to get the Print Parameters for the job which is to be
submitted in background to process sales order/delivery/invoice
CALL FUNCTION 'GET_PRINT_PARAMETERS'
   EXPORTING
ARCHIVE_ID                   = C_CHAR_UNKNOWN
ARCHIVE_INFO                 = C_CHAR_UNKNOWN
ARCHIVE_MODE                 = C_CHAR_UNKNOWN
ARCHIVE_TEXT                 = C_CHAR_UNKNOWN
AR_OBJECT                    = C_CHAR_UNKNOWN
ARCHIVE_REPORT               = C_CHAR_UNKNOWN
AUTHORITY                    = C_CHAR_UNKNOWN
COPIES                       = C_NUM3_UNKNOWN
COVER_PAGE                   = C_CHAR_UNKNOWN
DATA_SET                     = C_CHAR_UNKNOWN
DEPARTMENT                   = C_CHAR_UNKNOWN
      destination                  = c_locl " LOCL
EXPIRATION                   = C_NUM1_UNKNOWN
      immediately                  = space
IN_ARCHIVE_PARAMETERS        = ' '
IN_PARAMETERS                = ' '
LAYOUT                       = C_CHAR_UNKNOWN
LINE_COUNT                   = C_INT_UNKNOWN
LINE_SIZE                    = C_INT_UNKNOWN
LIST_NAME                    = C_CHAR_UNKNOWN
LIST_TEXT                    = C_CHAR_UNKNOWN
MODE                         = ' '
      new_list_id                  = c_x
PROTECT_LIST                 = C_CHAR_UNKNOWN
      no_dialog                    = c_x
RECEIVER                     = C_CHAR_UNKNOWN
RELEASE                      = C_CHAR_UNKNOWN
REPORT                       = C_CHAR_UNKNOWN
SAP_COVER_PAGE               = C_CHAR_UNKNOWN
HOST_COVER_PAGE              = C_CHAR_UNKNOWN
PRIORITY                     = C_NUM1_UNKNOWN
SAP_OBJECT                   = C_CHAR_UNKNOWN
TYPE                         = C_CHAR_UNKNOWN
      user                         = sy-uname
USE_OLD_LAYOUT               = ' '
UC_DISPLAY_MODE              = C_CHAR_UNKNOWN
DRAFT                        = C_CHAR_UNKNOWN
ABAP_LIST                    = ' '
USE_ARCHIVENAME_DEF          = ' '
DEFAULT_SPOOL_SIZE           = C_CHAR_UNKNOWN
PO_FAX_STORE                 = ' '
NO_FRAMES                    = C_CHAR_UNKNOWN
   IMPORTING
OUT_ARCHIVE_PARAMETERS       =
      out_parameters               = wa_params
   valid                        = l_valid
   EXCEPTIONS
     archive_info_not_found       = 1
     invalid_print_params         = 2
     invalid_archive_params       = 3
     OTHERS                       = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " get_print_parameters
*&      Form job_submit
      text
--> p1        text
<-- p2        text
FORM job_submit .
The job which we have created & the unique id ( jobcount ) which we
have got identifies our job. Hence those parameters are passed along
with the name of the background program "ZPROGRAM_TWO"
The job is submitted in background.
CALL FUNCTION 'JOB_SUBMIT'
    EXPORTING
ARCPARAMS                         =
    authcknam                         = sy-uname
COMMANDNAME                       = ' '
OPERATINGSYSTEM                   = ' '
EXTPGM_NAME                       = ' '
EXTPGM_PARAM                      = ' '
EXTPGM_SET_TRACE_ON               = ' '
EXTPGM_STDERR_IN_JOBLOG           = 'X'
EXTPGM_STDOUT_IN_JOBLOG           = 'X'
EXTPGM_SYSTEM                     = ' '
EXTPGM_RFCDEST                    = ' '
EXTPGM_WAIT_FOR_TERMINATION       = 'X'
    jobcount                          = w_jobcount
    jobname                           = w_jobname
LANGUAGE                          = SY-LANGU
    priparams                         = wa_params
    report                            = 'ZPROGRAM_TWO'
VARIANT                           = ' '
IMPORTING
STEP_NUMBER                       =
   EXCEPTIONS
     bad_priparams                     = 1
     bad_xpgflags                      = 2
     invalid_jobdata                   = 3
     jobname_missing                   = 4
     job_notex                         = 5
     job_submit_failed                 = 6
     lock_failed                       = 7
     program_missing                   = 8
     prog_abap_and_extpg_set           = 9
     OTHERS                            = 10
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " job_submit
*&      Form job_close
      text
--> p1        text
<-- p2        text
FORM job_close .
Once the job is submitted in background then the job is closed
CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
AT_OPMODE                         = ' '
AT_OPMODE_PERIODIC                = ' '
CALENDAR_ID                       = ' '
EVENT_ID                          = ' '
EVENT_PARAM                       = ' '
EVENT_PERIODIC                    = ' '
    jobcount                          = w_jobcount
    jobname                           = w_jobname
LASTSTRTDT                        = NO_DATE
LASTSTRTTM                        = NO_TIME
PRDDAYS                           = 0
PRDHOURS                          = 0
PRDMINS                           = 0
PRDMONTHS                         = 0
PRDWEEKS                          = 0
PREDJOB_CHECKSTAT                 = ' '
PRED_JOBCOUNT                     = ' '
PRED_JOBNAME                      = ' '
SDLSTRTDT                         = NO_DATE
SDLSTRTTM                         = NO_TIME
STARTDATE_RESTRICTION             = BTC_PROCESS_ALWAYS
    strtimmed                         = c_x
TARGETSYSTEM                      = ' '
START_ON_WORKDAY_NOT_BEFORE       = SY-DATUM
START_ON_WORKDAY_NR               = 0
WORKDAY_COUNT_DIRECTION           = 0
RECIPIENT_OBJ                     =
TARGETSERVER                      = ' '
DONT_RELEASE                      = ' '
TARGETGROUP                       = ' '
DIRECT_START                      =
IMPORTING
JOB_WAS_RELEASED                  =
CHANGING
RET                               =
   EXCEPTIONS
     cant_start_immediate              = 1
     invalid_startdate                 = 2
     jobname_missing                   = 3
     job_close_failed                  = 4
     job_nosteps                       = 5
     job_notex                         = 6
     lock_failed                       = 7
     invalid_target                    = 8
     OTHERS                            = 9
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " job_close
*&      Form display_spool
      text
--> p1        text
<-- p2        text
FORM display_spool .
To Read the Job to get the spool details
DATA : l_rqident TYPE tsp01-rqident, " Spool Number
         l_spoolno TYPE tsp01_sp0r-rqid_char.
CLEAR : l_rqident,
          w_lsind,
          wa_jobsteplist.
REFRESH : i_jobsteplist.
SET PF-STATUS 'ZAR02'.
Get the Spool Number
CALL FUNCTION 'BP_JOB_READ'
    EXPORTING
      job_read_jobcount           = w_jobcount
      job_read_jobname            = w_jobname
      job_read_opcode             = '20'
    JOB_STEP_NUMBER             =
   IMPORTING
     job_read_jobhead            = wa_jobhead
   TABLES
     job_read_steplist           = i_jobsteplist
CHANGING
   RET                         =
   EXCEPTIONS
     invalid_opcode              = 1
     job_doesnt_exist            = 2
     job_doesnt_have_steps       = 3
     OTHERS                      = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Read the Job Step list to get the spool number
READ TABLE i_jobsteplist INTO wa_jobsteplist INDEX 1.
CHECK wa_jobsteplist-listident <> space.
Spool Number
l_rqident = wa_jobsteplist-listident.
MOVE l_rqident TO l_spoolno.
Check the spool in TSP01
SELECT SINGLE * FROM tsp01 WHERE rqident = l_rqident.
IF sy-subrc = 0.
    LEAVE TO LIST-PROCESSING.
    CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
      EXPORTING
        spoolid       = l_spoolno
    IMPORTING
      RC            =
      STATUS        =
    PERFORM show_alv.
ENDIF.
w_lsind = sy-lsind.
IF sy-lsind GE 19.
    sy-lsind = 1.
ENDIF.
ENDFORM.                    " display_spool
*&      Form show_alv
      text
--> p1        text
<-- p2        text
FORM show_alv .
Before the import, fill the data fields before CLUSTR.
wa_index1-aedat = sy-datum.
wa_index1-usera = sy-uname.
To Import the selection screen data from Calling Program
IMPORT i_mara
FROM DATABASE indx(st) ID wa_index_key1 TO wa_index1.
FREE MEMORY ID wa_index_key1.
This prepares the field-catalog for ALV.
PERFORM prepare_fieldcatalog.
This displays the output in ALV format .
PERFORM display_alv.
ENDFORM.                    " show_alv
*&      Form display_status
      text
--> p1        text
<-- p2        text
FORM display_status .
To Display the STATUS of the JOB which is exectued in background
CLEAR : wa_jobsteplist.
REFRESH : i_jobsteplist.
WRITE:/ 'DISPLAYING JOB STATUS'.
CALL FUNCTION 'BP_JOB_READ'
    EXPORTING
      job_read_jobcount           = w_jobcount
      job_read_jobname            = w_jobname
      job_read_opcode             = '20'
    JOB_STEP_NUMBER             =
   IMPORTING
     job_read_jobhead            = wa_jobhead
   TABLES
     job_read_steplist           = i_jobsteplist
CHANGING
   RET                         =
   EXCEPTIONS
     invalid_opcode              = 1
     job_doesnt_exist            = 2
     job_doesnt_have_steps       = 3
     OTHERS                      = 4
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
To Display the status text as per the status type
CASE wa_jobhead-status.
    WHEN 'S'. WRITE: / 'Scheduled'.
    WHEN 'R'. WRITE: / 'Released'.
    WHEN 'F'. WRITE: / 'Completed'.
    WHEN 'A'. WRITE: / 'Cancelled'.
    WHEN OTHERS.
ENDCASE.
IF sy-lsind GE 19.
    sy-lsind = 1.
ENDIF.
ENDFORM.                    " display_status
*&      Form display_job_log
      text
--> p1        text
<-- p2        text
FORM display_job_log .
To display the log of the background program
LEAVE TO LIST-PROCESSING.
CALL FUNCTION 'BP_JOBLOG_SHOW_SM37B'
    EXPORTING
      client                    = sy-mandt
      jobcount                  = w_jobcount
      joblogid                  = ' '
      jobname                   = w_jobname
    EXCEPTIONS
      error_reading_jobdata     = 1
      error_reading_joblog_data = 2
      jobcount_missing          = 3
      joblog_does_not_exist     = 4
      joblog_is_empty           = 5
      joblog_show_canceled      = 6
      jobname_missing           = 7
      job_does_not_exist        = 8
      no_joblog_there_yet       = 9
      no_show_privilege_given   = 10
      OTHERS                    = 11.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " display_job_log
*&      Form prepare_fieldcatalog
      text
--> p1        text
<-- p2        text
FORM prepare_fieldcatalog .
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'MATNR'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Material no.'.
wa_fieldcat-outputlen    = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'ERSDA'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Creation date'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'ERNAM'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Name of Person'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'LAEDA'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-reptext_ddic = ' Last Change'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM.                    " prepare_fieldcatalog
*&      Form display_alv
      text
--> p1        text
<-- p2        text
FORM display_alv .
Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      it_fieldcat = i_fieldcat
    tables
      t_outtab     = i_mara.
ENDFORM.                    " display_alv
     ZPROGRAM_TWO: This is the 2nd program which would be called from program ZPROGRAM_ONE.
*& Report ZPROGRAM_TWO                                                *
REPORT zprogram_two                            .
PRASHANT PATIL
TABLES : mara.
TYPE-POOLS:slis.
TYPES : BEGIN OF t_mara,
          matnr   TYPE mara-matnr,
          ersda   TYPE mara-ersda,
          ernam   TYPE mara-ernam,
          laeda   TYPE mara-laeda,
        END OF t_mara.
DATA : i_mara        TYPE STANDARD TABLE OF t_mara,
       wa_mara       TYPE t_mara,
       wa_index      TYPE indx,        " For Index details
       wa_index_key TYPE indx-srtfd VALUE 'PRG_ONE',
       wa_index1     TYPE indx,        " For Index details
       wa_index_key1 TYPE indx-srtfd VALUE 'PRG_TWO',
       i_fieldcat        TYPE slis_t_fieldcat_alv,
       wa_fieldcat       LIKE LINE OF i_fieldcat.
SELECT-OPTIONS : s_matnr FOR mara-matnr.
Before the import, fill the data fields before CLUSTR.
wa_index-aedat = sy-datum.
wa_index-usera = sy-uname.
To Import the selection screen data from Calling Program
IMPORT s_matnr
FROM DATABASE indx(st) ID wa_index_key TO wa_index.
FREE MEMORY ID wa_index_key.
SELECT matnr
       ersda
       ernam
       laeda
       FROM mara
       INTO TABLE i_mara
       WHERE matnr IN s_matnr.
PERFORM prepare_fieldcatalog.
PERFORM display_alv.
Before the export, fill the data fields before CLUSTR
wa_index1-aedat = sy-datum.
wa_index1-usera = sy-uname.
EXPORT i_mara
TO DATABASE indx(st) FROM wa_index1 ID wa_index_key1.
*&      Form prepare_fieldcatalog
      text
--> p1        text
<-- p2        text
FORM prepare_fieldcatalog .
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'MATNR'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-outputlen    = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'ERSDA'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'ERNAM'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname    = 'LAEDA'.
wa_fieldcat-tabname      = 'I_MARA'.
wa_fieldcat-outputlen    = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM.                    " prepare_fieldcatalog
*&      Form display_alv
      text
--> p1        text
<-- p2        text
FORM display_alv .
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      it_fieldcat = i_fieldcat
    TABLES
      t_outtab    = i_mara.
ENDFORM.                    " display_alv
its possible to display ALV Grid using OO ALV. Following code can be used instead of FM.
In the PBO, add following code
SET PF-STATUS 'ZSTAT'.
If program is executed in background
CALL METHOD cl_gui_alv_grid=>offline
RECEIVING
e_offline = off.
IF off IS INITIAL.
IF container1 IS INITIAL.
CREATE OBJECT container1
EXPORTING
container_name = 'CC_ALV1' .
ENDIF.
ENDIF.
CREATE OBJECT g_grid1
EXPORTING
i_parent = container1.
CALL METHOD g_grid1->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
i_save = 'A'
i_default = ' '
is_layout =
is_print =
IT_SPECIAL_GROUPS =
it_toolbar_excluding =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
it_outtab = i_output
it_fieldcatalog = i_fieldcatalog
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Reward points if useful
Regards
Anji

I want to pay for a MacBook pro 15 inch with retina display online and send someone to pick it up from a store is it possible if ok who and where contact me

I want to pay for a MacBook pro 15 inch with retina display online and send someone to pick it up from a store is it possible if ok who and where contact me
<Email Edited by Host>

When you order a MBP you can have it delivered at any Apple retail store. When you get the e-mail that the MBP is ready to be picked up, you have options to enter in the rersponse if you or someone else will pick it up. You will have to fill in some required information that will identify that person to the store personnel.
I had my last MBP delivered to the local store, but I picked it up.
Ciao.

Automatic Display of NEW Data in ALV Report using Classes and Methods

Hi,
I have developed a ALV Report for displaying data from a set of DB tables using ABAP OO, Classes and Methods. The requirement is to have the report output to be automatically updated with the new entries from the DB table at a regular frequency of tiem may be every two minutes.
Could anyone please tell me how can this be acheived.
Thanks and regards,
Raghavendra Goutham P.

Yes its possible.
Take a look at this thread
Auto refresh of ALV Grid, without user interaction
Or Rich's blog
/people/rich.heilman2/blog/2005/10/18/a-look-at-clguitimer-in-46c
Regards,
Ravi
Note : Please mark all the helpful answers

Convert ALV report into PDF and mail ( Hierarchical List View )

Hi All,
I see many posts of PDF download but none resolve my issue.
I am writing a report in APO SNP which fetches data and displays an alv using REUSE_ALV_HIERSEQ_LIST_DISPLAY as i need to show the result as a Hierarchical sequential list.
I need to provide the functionality of PDF download ( online ) and Email with PDF as attachement ( Background ) for the list output.
I read the post http://www.sapdev.co.uk/reporting/rep_spooltopdf2.htm which provides a sample program and tried to incorporate but the control doesn't come back from the ALV function module.
How do i trigger the spool creation while still showing the output and then send email?
Suggestions and pointers are highly appreciated
Regards,
KD

Hi.,
Check this wiki: [Convert ALV as PDF Attachment|http://wiki.sdn.sap.com/wiki/display/Snippets/SENDALVGRIDASPDFATTACHMENTTOSAPINBOXUSINGCLASSES]
hope this helps u.,
Thanks & Regards,
Kiran

ALV list display in a Background job - Spool output

Hi,
We are currently working on a report scheduled to be run in the background job, and the ALV list is displayed in the spool output.
ALV list in the spool does not look the same as front run job, the column headers are all crowded together, and there is no grid in-between different columns or rows. It's hard to read.
Is there a way to add grid for this kind of output?
Thanks!

Hi Deepak:
I expanded your report into two rows display, and the grid in the spool display simply gone!
report zzscratch line-size 120 no standard page heading.
type-pools slis.
tables pa0001.
data : li_field type standard table of slis_fieldcat_alv,
gi_events type standard table of slis_alv_event,
gr_layout_bck type slis_layout_alv,
gr_save like disvariant,
gr_events type slis_alv_event.
types : begin of gtt_emp,
pernr type persno,
ename like pa0001-ename,
uname like pa0001-UNAME,
end of gtt_emp.
data : lr_field type slis_fieldcat_alv.
data : lc_rep like syst-repid.
data : li_emp type standard table of gtt_emp,
lr_emp type gtt_emp.
data : gv_ref_table type lvc_rtname.
gv_ref_table = 'CATSDB'.
lr_field-fieldname = 'PERNR'.
lr_field-ref_tabname = gv_ref_table.
lr_field-inttype = 'N'.
lr_field-outputlen = 8.
lr_field-seltext_l = 'EMPLOYEE Number'.
append lr_field to li_field.
lr_field-fieldname = 'ENAME'.
lr_field-ref_tabname = 'PA0001'.
lr_field-inttype = 'C'.
lr_field-outputlen = 40.
lr_field-seltext_l = 'EMPLOYEE Name'.
append lr_field to li_field.
lr_field-fieldname = 'UNAME'.
lr_field-ref_tabname = 'PA0001'.
lr_field-inttype = 'C'.
lr_field-outputlen = 12.
lr_field-seltext_l = 'User Name'.
lr_field-row_pos = 2.
lr_field-col_pos = 1.
append lr_field to li_field.
lc_rep = sy-repid.
gr_layout_bck-edit_mode = 'D'.
gr_save-report = sy-repid.
lr_emp-pernr = '00000001'.
lr_emp-ename = 'abc'.
lr_emp-uname = 'testus'.
append lr_emp to li_emp.
lr_emp-pernr = '00000002'.
lr_emp-ename = 'def'.
append lr_emp to li_emp.
lr_emp-pernr = '00000003'.
append lr_emp to li_emp.
lr_emp-pernr = '00000004'.
append lr_emp to li_emp.
lr_emp-pernr = '00000005'.
append lr_emp to li_emp.
lr_emp-pernr = '00000006'.
append lr_emp to li_emp.
lr_emp-pernr = '00000007'.
append lr_emp to li_emp.
lr_emp-pernr = '00000008'.
append lr_emp to li_emp.
end-of-selection.
Function module for ALV grid display
call function 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_buffer_active    = 'X'
            i_callback_program = lc_rep
            is_layout          = gr_layout_bck
            it_fieldcat        = li_field
            i_save             = 'A'
            is_variant         = gr_save
            it_events          = gi_events
       TABLES
            t_outtab           = li_emp[]
       EXCEPTIONS
            program_error      = 1
            others             = 2.
if sy-subrc <> 0.
clear gr_messages.
message e023 into gr_messages.
append gr_messages to gi_messages.
endif.

ALV Report displays space instead of '0.00' for qty field. why?

Hello friends,
I am facing a problem to display 0 value for the field
field - ZZQTY (Predefined Type at Domain level)
QUAN 21,2
In the program I am clearing the field and I can see its value as 0.00 while debugging.
As soon as field ZZQTY is displayed on ALV, it becomes blank (Space).
My requirement is to display '0.00' on ALV report.
What should I do?
Regards,
Ronny Hanks

Hello
Search for
LS_FIELDCAT-NO_ZERO = 'X'.
for this field in programm and comment this.

ALV Report Displaying QUAN field different in systems

Hi Guys,
I have a field of type QUAN (quantity) on an ALV report that is displaying differently on the Devlopment and QA systems.
If I enter the value '5' in this field in Development and press enter, the value displays as '5.000'. If I enter the value in the QA field, however, the value displayes as '0.005'.
I have looked at domains and everything, but they seem simmilar.
Please advise fi there is something I have overlooked,
Thank you,
Christiaan

Hi,
Check in system default parameter settings. It works based on system default parameter settings.
System => User Profile => Own Data
In *Defaults* tab check the *Decimal Notaion* field.
Regards,
Shankar.

ALV report run In background gives 2 spool numbers

Hi ,
The ALV report which I am running in Background gives me 2 spool numbers after the Job is created in sm37.
I am just executing my ALV report by running it in backgroung procressing, but I get 2 spool one has all the correct data of the ALV and 1 blank spool is created.
I have Passed the followin parameter to my ALV FM.
lwa_print-no_change_print_params = 'X'.
lwa_print-no_print_listinfos = 'X'.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
     i_callback_program       = sy-repid
     i_callback_pf_status_set = 'SET_PF_STATUS'
     i_callback_user_command = 'USER_COMMAND'
     i_default                = space
     is_layout                = t_layout
     is_print                 = lwa_print
     it_fieldcat              = t_fieldcat
   TABLES
     t_outtab                 = t_final
   EXCEPTIONS
     program_error            = 1
     OTHERS                   = 2.
Unable to find the reason why I get 2 spool created for it?
Thanks
Ritesh

Hi venkatesh,
Thanks for the reply.
I tried that also but issue was due to a SKIP statement called in the program and due to which a new spool which was blank was called.
The issue is resolved.
Thanks
Solanki Ritesh

Running a ALV Report in bakcground and sending it to Email/FAX

Hi,
I am designing a ALV report to send a email/fax/Printer which has to be run in background or foreground according to selection screen inputs.
I am doing the following
1. After generating ALV report, converting it to pdf
2. Sending Email or Fax or Print from selection screen value.
3. after that scheduling in background using JOB_OPEN and JOB_SUBMIT FM's.
Can I use SO_DOCUMENT_SEND_API1 FM for both Email and Fax.
When I schedule the report in the background using JOB_OPEN, at which point I have to code it inside the report. Is it after I generate the ALV Report and Email sending code or before it..
Thanks

Hi
How did you end up doing the emailing? I have the same task.....

Urgent: regarding ALV report display problem

hi,
There are 3 problems:-
1.) I had made a ALV report in which i have to display 'POSTING DATE' (iseg-budat) when we execute the report i.e. it should be displayed as PERIOD :- _______ to _______ on alv report ..
2.)the 2nd problem is dat when i use the ' wa_fieldcat-no_zero = 'X'. It eliminates all the leading zeros which are present which is okay when i it displays material no.. but the problem is dat it also deletes the other fields where the values are to be zeros.
i had used this FM:-
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
   INPUT = ITS1-MATNR
   IMPORTING
   OUTPUT = ITS1-MATNR.
so that only matnr field are to be 0's.
3.) I want to delete the rows which use to contain the values 0's as there are no calculations are performing as these are displayed .
ANYbody having solution of this problem ,plzzzz provide the soluion of it as it is most urgent to me and dat person will definately rewarded.
regards,
ric.s

hi kiran,
thanks for ur response. here is d code which i am using it and plzz help me to figure out where i have to make changes:-
REPORT ZTEST03.
TABLES: ISEG,MARA.
TYPE-POOLS : SLIS.
INTERNAL TABLE FOR INVENTORY STOCK *****************
DATA: BEGIN OF ITS1 OCCURS 0,
      MATNR LIKE ISEG-MATNR,
      MEINS LIKE ISEG-MEINS,
      MENGE LIKE ISEG-MENGE,
      WRTZL LIKE ISEG-WRTZL,
      BUCHM LIKE ISEG-BUCHM,
      WRTBM LIKE ISEG-WRTBM,
      WERKS LIKE ISEG-WERKS,
      BUDAT LIKE ISEG-BUDAT,
      MTART LIKE MARA-MTART,
      ITEMDESC LIKE MAKT-MAKTX,
      DIFFQTY LIKE ISEG-BUCHM,
      DIFFVALUE LIKE ISEG-WRTBM,
      END OF ITS1.
data: t_heading type slis_t_listheader.
SELECTION-SCREEN BEGIN OF BLOCK PAR1 WITH FRAME TITLE TEXT-001.
*********PARAMETERS*********
PARAMETERS : PLANT LIKE ISEG-WERKS OBLIGATORY.
*********SELECTION SCREEN OPTIONS*********
SELECT-OPTIONS : R_DATE FOR ISEG-BUDAT,
                 M_TYPE FOR MARA-MTART,
                 IT_M FOR MARA-MATNR.
*********DEFINING VARIABLES*********
SELECTION-SCREEN END OF BLOCK par1.
TOP-OF-PAGE.
     PERFORM PG_HEADER.
START-OF-SELECTION.
SELECT DISTINCT A~MATNR A~MEINS A~MENGE A~WRTZL A~BUCHM A~WRTBM A~WERKS A~BUDAT B~MTART
   FROM ISEG AS A INNER JOIN MARA AS B ON B~MATNR = A~MATNR
     INTO CORRESPONDING FIELDS OF TABLE ITS1 WHERE B~MATNR = A~MATNR AND B~MEINS = A~MEINS AND A~WERKS = PLANT AND A~BUDAT IN R_DATE AND B~MTART IN M_TYPE AND B~MATNR IN IT_M.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
   INPUT = ITS1-MATNR
   IMPORTING
   OUTPUT = ITS1-MATNR.
SORT ITS1 BY MATNR.
DELETE ADJACENT DUPLICATES FROM ITS1 WHERE MENGE = 0 AND BUCHM = 0.
LOOP AT ITS1.
     ITS1-DIFFQTY = ITS1-MENGE - ITS1-BUCHM.
     ITS1-DIFFVALUE = ITS1-WRTZL - ITS1-WRTBM.
     SELECT SINGLE MAKTX FROM MAKT INTO ITS1-ITEMDESC WHERE MATNR = ITS1-MATNR.
     MODIFY ITS1.
ENDLOOP.
PERFORM PRN_SMSTOCK_ALV.
WRITING DATA FROM D TABLES**********
FORM PG_HEADER.
WRITE : 'PHYSICAL INVENTORY AUDIT REPORT             PLANT : ', PLANT.
ENDFORM.
*&      Form PRN_SMSTOCK_ALV
      text
--> p1        text
<-- p2        text
form PRN_SMSTOCK_ALV .
data: w_title   type lvc_title,
      w_repid   type syrepid,
      w_comm    type slis_formname,
      w_status type slis_formname,
      x_layout type slis_layout_alv,
      t_event    type slis_t_event,
      t_fieldcat type slis_t_fieldcat_alv,
      t_sort     type slis_t_sortinfo_alv.
refresh t_fieldcat.
refresh t_event.
refresh t_sort.
clear x_layout.
clear w_title.
perform set_fieldcat2 using:
1 'MTART'     'MTART'     'MARA' '15' space 'MATERIAL TYPE'        space space space space space space space space SPACE t_fieldcat 'L' 'C',
2 'MATNR'     'MATNR'     'MARA' '13' space 'MATERIAL NO. '        space space space space space space space space SPACE t_fieldcat 'R' 'C',
3 'ITEMDESC' 'MAKTX'     'MAKT' '25' space 'MATERIAL DESCRIPTION' space space space space space space space space SPACE t_fieldcat 'L' 'C',
4 'MEINS'     'MEINS'     'MARA' '5'   space 'UOM'                  space space space space space space space space SPACE t_fieldcat 'C' 'C',
5 'MENGE'     'MENGE'     'ISEG' '13' space 'ORG.INV.QTY'          space space space space space space space space SPACE t_fieldcat 'R' 'C',
6 'WRTZL'     'WRTZL'     'ISEG' '13' space 'ORG.INV.VALUE'        space space space space space space space space SPACE t_fieldcat 'R' 'C',
7 'BUCHM'     'BUCHM'     'ISEG' '13' space 'PHY.INV.QTY'          space space space space space space space space SPACE t_fieldcat 'R' 'C',
8 'WRTBM'     'WRTBM'     'ISEG' '13' space 'PHY.INV.VALUE'        space space space space space space space space SPACE t_fieldcat 'R' 'C',
9 'DIFFQTY'   'MENGE'     'ISEG' '13' space 'DIFF.INV.QTY'         space space space space space space space space SPACE t_fieldcat 'R' 'C',
10 'DIFFVALUE' 'WRTZL'     'ISEG' '13' space 'DIFF.INV.VALUE'       space space space space space space space space SPACE t_fieldcat SPACE 'P'.
x_layout-zebra = 'X'.
perform set_top_page_heading using t_heading t_event.
perform set_events using t_event.
w_status = ''.
w_repid = sy-repid.
w_comm   = 'USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_callback_program       = w_repid
      it_fieldcat              = t_fieldcat
      i_Callback_top_of_page   = 'Top-of-page'
      is_layout                = x_layout
      it_sort                  = t_sort
      i_callback_pf_status_set = w_status
      i_callback_user_command = w_comm
      i_save                   = 'X'
      it_events                = t_event
      i_grid_title             = w_title
      tables
      t_outtab                 = ITS1
    exceptions
      program_error            = 1
      others                   = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ENDFORM.
FORM set_fieldcat2 USING
      p_colpos p_fieldname p_ref_fieldname p_ref_tabname
      p_outputlen p_noout
      p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
      p_hotspot p_showasicon p_checkbox p_edit
      p_dosum
      t_fieldcat TYPE slis_t_fieldcat_alv
      P_JUST
      P_FTYPE.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-no_zero = 'X'.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-hotspot = p_hotspot.
wa_fieldcat-checkbox = p_checkbox.
wa_fieldcat-icon = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set output length.
IF NOT p_outputlen IS INITIAL.
    wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
    wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
    wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
    wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
    wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
    wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
IF NOT P_JUST IS INITIAL.
    WA_FIELDCAT-JUST = P_JUST.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
    wa_fieldcat-input     = 'X'.
    wa_fieldcat-edit     = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
======================== Subroutines called by ALV ================
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
     exporting
          it_list_commentary = t_heading.
ENDFORM.
form set_top_page_heading using t_heading type slis_t_listheader
                                t_events type slis_t_event.
data: x_heading type slis_listheader,
      x_event   type line of slis_t_event.
Report title
clear t_heading[].
clear x_heading.
x_heading-typ = 'H'.
x_heading-info = 'PHYSICAL INVENTORY AUDIT REPORT'.
append x_heading to t_heading.
Plant Name
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'PLANT: '.
x_heading-info = its1-werks.
append x_heading to t_heading.
Posting Date
*clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'POSTING DATE: '.
x_heading-info = ITS1-BUDAT.
append x_heading to t_heading.
Control Date
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'CONTROL No: '.
x_heading-info = its1-werks.
append x_heading to t_heading.
Control date
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'CONTROL DATE: '.
x_heading-info = its1-werks.
append x_heading to t_heading.
User who is running the report
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'User: '.
x_heading-info = sy-uname.
append x_heading to t_heading.
Date of execution
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Date: '.
write sy-datum to x_heading-info.
append x_heading to t_heading.
Time of execution
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Time: '.
write sy-uzeit to x_heading-info.
append x_heading to t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
append x_event to t_events.
endform.
form set_events using t_events type slis_t_event.
data: x_event   type line of slis_t_event.
endform.
plzzz help me out as it is most urgent to me.
regards,
ric.s

Downloading ALV report in excel and csv format

1.I have generated a report in ALV.
Now, I want a button 'generate' on my alv tooldbar.
How to do that?
2.Now clicking on that generate button will show a popup window containing the title 'Save list in file..'
And the window will contain two radio buttons to download the report in either in excel or in csv file format.
i. Spreadsheet(.xls)
ii.Spreadsheet(.csv)
How to get the popup window containing two radio buttons and having the options for downloading the alv report in the above file formats.
Kindly guide.

@chandrasekhar:
Thanks for your response. I'll try with the export button but also willing to know how to create button on toolbar.And by clicking on that button a popup box will come having two radio buttons asking to download the report either in .xls or in .csv format. I am looking for the subroutines for that.
Thanks.
Message was edited by:
cinthia nazneen

ALV Report - displaying column name in two fields.

Dear All,
I am working on ALV report , report is ready but now i have to format it according to client requirment, in which have to show column name in two row like.
supppose there is field by name
"Date of receipt of processed Goods"
can i display it like
"Date of receipt of
processed Goods "
Assured points for suitable answer.
Looking foward to your response.
Best Regards,
Gulrez Alam

Hi Ellery,
As Philipp said, there is no need for populating the field using PL/SQL. You would just need to go to the Paper Layout in the Reports Editor, click on "Text" in the Drawing toolbar, drag it to the appropriate place in your layout to create the field, and write what you want in that field. Below that, you can create the field(s) which will display the actual totals. I'm assuming that creating the totals field is not a problem.
Navneet.

ALV report display

Can the fields on the ALV report be displayed in a certain column or is it can only be displayed left justified for alpha field and right justified for numeric field?

Use COL_POS to set the position and use JUST to justify the field in field catalog
(R)ight
(L)eft
(C)ent.

ALV report display online and generate in spool

Similar Messages

Maybe you are looking for