Always error when try to save my item type on workflow builder

Dear All,
I'm created a simple workflow. There is a notification with Result Type = Approval (Standard). Every I tried to save, workflow builder show a error message below:
WFDESV_FAIL COUNT=1
WFACTV_FAIL OPERATION=SAVE NAME=FIF_NOTIFY_APPROVER1_NTF TYPE=FIF
WFACTV_MESSAGE_RESULT RESULT=WFSTD_APPROVAL
What does it mean? I've tried to change Result Type with another standard Lookup Type (such as Boolean or another). But the error message still coming. How do I fix it?
Thank you,
Agas

Hi,
The first thing that is wrong is that your configuration is not finding the messages correctly, so that you get a meaningful message. Check that the keys in the registry for Workflow (HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\Workflow have been created correctly - there should be a Languages key and then ENG with an entry for Help, Message and TemplateDir which point to your Workflow home. Once that is set up, then you should at least get a meaningful message :)
There are two possible problems here, but I haven't had chance to look in the messages file to see which one it is. Either the notification does not have a performer assigned to it when used in the process, or you have not modelled a transition for all available options - you need to model all responses, or use the "default" transition to capture those that you have not explicitly included.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Similar Messages

Unknown file error when try to save project

We are experiencing a problem with some of our Final Cut Pro edit suites. An editor opens, or starts a new, project and makes some changes. When they try to save the project they get an error - File Error: Unknown file.
This doesn't happen often, but it usually happens at the worst possible times.
Does anyone have any ideas on what might be causing this?

I have the same problem. I get the following error when trying to save:
operation not allowed
I'm usually aware of this when working along and then that pops up. It happens when autosave cannot save. When I try to manually save I get the same error message.
This has happened twice after working for a couple hours. If I wait, it still will not save. The only solution is to shut down FCP without saving, restart, and the restore from the last autosave before the problem. I usually use about 45 minutes to an hour's worth of work.
I have no idea what causes this.

Want to tweak an apps script, but it gives error when try to save - help!

so I have a neat app that when used, will send an image it takes to your email address of choice. It uses "Mail" as the default mail app, but I only use Entourage as my mail app.
Opening the package contents of the app, I found the Applescript that controls this function.. see it below
on sendemail(emailto) --
-- set email_to to "[email protected]" --
-- set email_from to "[email protected]" --
set image_name to "Snapshot.jpg"
set image_path to ((path to home folder) as string) & image_name
set image_file to image_path as alias
tell application "Mail"
activate
set new_message to make new outgoing message with properties {subject:"Here is Your Snapshot"}
tell new_message
-- set visible to true --
-- set sender to email_from --
make new to recipient at end of to recipients with properties {address:email_to}
make new attachment with properties {file name:image_file} at after the last paragraph
-- activate --
end tell
send new_message
end tell
tell application "Finder"
-- delete image_path --
end tell
end send_email
it seems easy enough tweak to me.. see bold text above, but just change the line _tell application "Mail"_ to _tell application "Microsoft Entourage"_ and save the Applescript and viola.. BUT it does not work as once I make that weak & try to save the Applescript I get this error "*Syntax Error Expected “:”, etc. but found property*" and highlights just the word name which is followed by an existing ":". If I change it back to "Mail" it saves just fine... what gives?

I took a different tact that is getting me closer, the Entourage dictionary helped...
set thesubject to "here is your proof!"
set theBody to "here is your visual proof."
set theAttachment_name to "Default.jpg"
set theAttachment_path to ((path to home folder) as string) & theAttachment_name
set theAttachment_file to theAttachment_path as alias
tell application "Microsoft Entourage"
set theRecipients to {{address:{display name:"Contact 1", address:"[email protected]"}, recipient type:to recipient}, {address:{display name:"Contact 2", address:"[email protected]"}, recipient type:cc recipient}}
set theMessage to make new outgoing message with properties {recipient:theRecipients, subject:thesubject, content:theBody, attachment:theAttachment_file}
open theMessage
end tell
tell application "Microsoft Entourage"
send theMessage
end tell
now.. I have the email composed, the attachment is found in proper 'home' folder and correctly placed/attached, subject line set, contact addresses set.. BUT my final issue seems to be just getting the email to send. it creates and composes the email, but is waiting for it to manually be sent as it seems my final "tell" is not sending the email automatically like it should. I have used the Entourage script dictionary, but I am failing to see how to get the script syntax that finishes it off by sending the email automatically.
tell application "Microsoft Entourage"
send theMessage
end tell
this above tell is not working... any ideas?

Facing error when i saving the new item type

1602: Could not save.
1400: Could not save to database. MODE=UPLOAD EFFDATE=2009/07/29 10:13:55
1401: Could not upload ACTIVITY entity 'EMS/NTF_MGR_ACTION_TAKEN'.
210: Oracle Error: ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "OWF_MGR.WF_LOAD", line 2138
ORA-06512: at line 1
. SQL text: BEGIN WF_LOAD.UPLOAD_ACTIVITY_ATTR_VALUE(:process_activity_id, :name, :protect, :custom, :value, :value_type, to_date(:effective_date, 'YYYY/MM/DD HH24:MI:SS'), :level_error); END;
any help about it

There could be some activities of this item type which might not be END-DATED.
Please run below sql and check. You need to end_dated the previous ALL activities, EXCPET LAST ONE WHICH LOADER will end date.
select PROTECT_LEVEL, CUSTOM_LEVEL, VERSION, BEGIN_DATE, END_DATE
from WF_ACTIVITIES_VL
where ITEM_TYPE = 'EMS'
and NAME = 'NTF_MGR_ACTION_TAKEN'
and sysdate >= BEGIN_DATE
and sysdate < nvl(END_DATE, sysdate+1);

Error when try Specify User-Defined Text Types

Hi all,
I have a problem when I try to Specify User-Defined Text Types. The system gave me the error what is described below. Do you know how to solve a problem?
F1
Choose the key from the allowed namespace
Message no. SV019
Diagnosis
You have attempted to create an entry and have used a key which is not in your namespace.
This can cause problems in later upgrades because the entry could be overwritten by an import, or overwrite an existing entry.
Procedure
Check your entry and try to enter a key value from your namespace.
You can display the namespace definition with RDDKOR54.
If you must use the key entered, document your change so that it can be repeated after an upgrade or release change if necessary. If you put the data in a change request, you can export it before an upgrade or release change, and import it again afterwards.

do you have more details or advice and so on?

Disk Full Error message when try to save word 2004

Hi all
please help me , I have problem when try to save my word 2004 and the message show that Disk full error!!!!!

Hi Rory,
This is a bug with database limitations which I understand may have been resolved. Request the latest build from SAP Support (raise an OSS message under part XX-PART-NKS).
Best regards,
Luke

Error when trying to save a file

I get this error when trying to save any file (newly created or not) word document in MS word 2010:"You are attempting to save a file type (plain text files) that has been blocked by your File Block settings in the Trust Center".
I followed the directions given by the Microsoft Knowledge Base article 922850, but I am still having this issue. I can still save files as PDF but not in any kind of word format.
I also tried opening another file copy and pasting under a different name and it doesn't help.
Please Help.
Bruce

Hi,
Please try the following methods:
Using Administrative Template files and the Office Customization Tool to disable the restriction
Use a trusted location, or create an exempt location
Quote from:
http://support.microsoft.com/kb/922849/en-us
Regards,
George Zhao
TechNet Community Support

Getting error when try to upload xml file into Data Template

Hi,
Getting error when try to upload xml file into Data Template.error:"The uploaded file XXSLARPT.xml is invalid. The file should be in XML-DATA-TEMPLATE format."Plz anybody help me.
Thanks,
Prasad.

Hi,
Anybody Help Plzzzzzz.
thx,
Prasad

After upgrade SP-Crawl Error: The SharePoint item being crawled returned an error when attempting to download the item.

Hi All - After the upgrade, I am getting SP-Crawl Error for certain links. I check the Crawl component has proper permission.
Google is showing some article like
http://blog.karstein-consulting.com/2012/04/20/error-in-crawl-log-the-sharepoint-item-being-crawled-returned-an-error-when-attempting-to-download-the-item/
not sure if this resolution is referring to 2010 and/or 2013.
I checked the registery editor. I couldn't find 14.0 under the Office Server.
Any clue?
Regards,
Khushi
Khushi

I checked the web application policy the search crawl account has full read permission.
Crawl
Fiddler
Log Error referring the Correlation ID
01/06/2014 13:05:06.14 w3wp.exe (0x1698)                       0x0118 SharePoint Foundation
Monitoring                    nasq Medium Entering monitored scope (Request (GET:/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Parent No
01/06/2014 13:05:06.14 w3wp.exe (0x1698)                       0x0118 SharePoint Foundation
Logging Correlation Data      xmnv Medium Name=Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD) e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.14 w3wp.exe (0x1698)                       0x0118 SharePoint Foundation
Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
General                       af71 Medium HTTP Request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
General                       af75 Medium Overridden HTTP request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
General                       af74 Medium HTTP request URL: /sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
Files                         aise3 Medium Failure when fetching document. 0x80070090 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1960 SharePoint Foundation
Monitoring                    b4ly Medium Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Execution Time=20.5461867360237 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1960 SharePoint Foundation
Monitoring                    b4ly Medium Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Execution Time=29.917489513332 e8b1679c-0476-70d4-9fcd-2549ba3ee9d4
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1960 SharePoint Foundation
Monitoring                    nasq Medium Entering monitored scope (Request (GET:<SiteURL>nsurance%20Benefits%2fLife%20Insurance%2fBasic%20Life%20and%20ADD&FolderCTID=0x01200039DA632EEACF264685CF39D68A18F7C8)).
Parent No
Any clue?
Regards,
Khushi
Khushi

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Error when trying to save a fillable form?

Hi,
My staff is getting an error when trying to save information that was typed in a fillable form. They are able to print but cannot save. The error message they are getting is: "Cannot Save Form Information Please note: You cannot save a completed copy of this form on your computer. If you would like a copy for your records, please fill it in and print it." They have also gotten the message: "Save a Blank Copy of this Form Data typed into this form will not be saved. Adobe Reader can only save a blank copy of this form. Please print your completed form if you would like a copy for your records."
This form was created in LiveCycle ES4. I have Adobe XI on my computer and I am able to save the form fine. My staff has Adobe 9 on their computer. Is there anything I can do so that they will be able to save the form on their computer once they have finished filling it out?

Gilad D (try67) wrote:
Mac users can fill in LCD forms just fine, they just can't create them.
And you can fill in and save an LCD form in Reader, if it has the appropriate rights applied to it in Acrobat before-hand.
I thought The latest Reader XI (regardless of Platform) had the ability Print and save with or, without reader rights. That what I've been reading on this forum ever since reader XI came out.

'System Error' when trying to save Form Manager Registry Settings

Hi,
trying to save changes made in the form manager registry settings [Home > Services > Adobe LiveCycle Form Manager > Registry Settings (http://localhost:8080/FormManagerAdmin/registry-cfg-load)], I get an error, which reads:
> System Error
>
The request could not be processed. Please retry the operation. If the problem persists, please contact your system administrator.
Has anyone had this error as well?
The system runs fine apart from the jboss log files being crammed with the well-known and pretty annoying
SpyJMSException.
Does anyone have an idea how to apply changes to the form manager registry settings, if the web ui does not work? Where are the 'form manager registry settings' being stored? Maybe I succeed in changing the settings manually at least without having to re-install Livecycle...
Regards,
Steve

We are using JBoss 3.2.5.
Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

MBP "System Profile" error when try read "Logs" and long time blue screen

MBP "System Profile" error when try to read "Logs" and it takes long time blue screen at startup.
This happened all time when I open the "System Profiler" application and then select the option "Log", then the system crashed again over and over. The system was reinstalled clean but the error occurs again, without any third party application installed.
Here is the error:
Sun Jun 22 20:13:47 2008
panic(cpu 0 caller 0x001A8CD4): Kernel trap at 0x007efc12, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x013ab000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x045ce1e0, ECX: 0x05782c64, EDX: 0x00010001
CR2: 0x00000000, EBP: 0x344d3ca8, ESI: 0x046ad5c0, EDI: 0x046a8040
EFL: 0x00010206, EIP: 0x007efc12, CS: 0x00000008, DS: 0x00010010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x344d3ab8 : 0x12b0fa (0x459294 0x344d3aec 0x133243 0x0)
0x344d3b08 : 0x1a8cd4 (0x4627fc 0x7efc12 0xe 0x461fac)
0x344d3be8 : 0x19ede5 (0x344d3c00 0x206 0x344d3ca8 0x7efc12)
0x344d3bf8 : 0x7efc12 (0xe 0x48 0x10 0x3e0010)
0x344d3ca8 : 0x3ef261 (0x45ce1e0 0x46a2c40 0x49a7a4 0x0)
0x344d3ce8 : 0x40abe6 (0x46a8040 0x46a2c40 0x344d3d28 0x3eeac0)
0x344d3d08 : 0x40e4fb (0x46aec00 0x46a2c40 0x46aec04 0x46aec00)
0x344d3d28 : 0x43ab14 (0x46aec00 0x46a2c40 0x600000 0x19c8d1)
0x344d3d78 : 0x18801e (0x46aec00 0x4a5e5ac 0x4a5e5c0 0x11d975)
0x344d3db8 : 0x12d17e (0x450adac 0x4a5e590 0x0 0x0)
0x344d3df8 : 0x126257 (0x450ad00 0x0 0x18 0x344d3ee4)
0x344d3f08 : 0x1973dd (0x344d3f44 0x0 0x0 0x0)
0x344d3fc8 : 0x19f3b3 (0x479fee0 0x0 0x10 0x0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff1c8
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOFireWireIP(1.7.1)@0x7ea000->0x7f2fff
dependency: com.apple.iokit.IOFireWireFamily(3.4.4)@0x6ed000
dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x5d1000
BSD process name corresponding to current thread: ioreg
Mac OS version:
9D34
Kernel version:
Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
This is the System Config:
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
Graphics: GeForce 8600M GT, GeForce 8600M GT, spdisplayspciedevice, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.5
Bluetooth: Version 2.1.0f17, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA

Hello @larrycarol99,
I understand that after upgrading your computer when you plug in an ethernet cord you get a hardware malfunction error. I am providing you with a Microsoft Support document: Hardware Malfunction Results in System Error Message that explains what causes that error and provides steps on fixing it. I am also including a link to the Compaq Presario 5300US Desktop PC Drivers page, which unfortunately does not have any drivers for your computer running Windows Vista.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Designer Workflow SharePoint 2013 error when try to assign a task forbidden

designer Workflow SharePoint 2013 error when try to assign a task
Next attempt scheduled in less than one minute. Details of last request: HTTP Forbidden to http://oursite/_vti_bin/client.svc/web/lists/getbyid(guid'3cd5739e-f243-4b75-a724-fdbee704913f')/ContentTypes
Correlation Id: 56baaedd-a2d1-4377-9277-89d20cbdf434
and then after cancel I get
RequestorId: da9fe991-f8d5-7f4a-7dc2-fec198a2a115. Details: System.ApplicationException: HTTP 403 {"x-ms-diagnostics":["30000000; reason=SSL is required"],"SPRequestGuid":["000515ef-1d97-4d94-a35e-f0423f2f5eaa"],"request-id":["000515ef-1d97-4d94-a35e-f0423f2f5eaa"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["151"],"SPIisLatency":["0"],"MicrosoftSharePointTeamServices":["15.0.0.4551"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Wed, 15 Jan 2014 17:49:27 GMT"],"Server":["Microsoft-IIS\/8.0"],"X-Powered-By":["ASP.NET"]} at
Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Amit,
According to your description, my understanding is that the error occurred when you assigned a task.
Did you install any CU for SharePoint?
If yes, after an update has been performed, several Windows PowerShell cmdlets must be run in order to maintain the connection between the SharePoint Server 2013 farm and the Workflow Manager farm.
$credential = [System.Net.CredentialCache]::DefaultNetworkCredentials
$site = Get-SPSite(<siteUri>)
$proxy = Get-SPWorkflowServiceApplicationProxy
$svcAddress = $proxy.GetWorkflowServiceAddress($site)
Copy-SPActivitiesToWorkflowService -WorkflowServiceAddress $svcAddress -Credential $credential -Force $true
After running the command, re-register the workflow service to see if the issue still occurs.
Register-SPWorkflowService: http://technet.microsoft.com/en-us/library/jj663115.aspx
More information are provided in the link below:
http://technet.microsoft.com/en-us/library/dn133867.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error when trying to save/apply in OAM Console (credential store / wallet)

So our Admin WLS had accidentally been started as root previously, so we restarted as oracle (after chown -R oracle:oinstall all files), and the Admin Server starts up ok. However, when attempting to save/apply a change within the OAM console, we receive the following error:
Error in creating the credential store (wallet) : JPS-01047: Cannot persist the wallet. Reason java.io.IOException: java.io.FileNotFoundException: /tmp/pki_data1951273487.lck.tmp (Permission denied).
And in the log files this also appears:
<Mar 29, 2013 2:27:01 PM CDT> <Warning> <oracle.jps.idmgmt> <JPS-01520> <Cannot initialize identity store.>
java.lang.RuntimeException: java.security.PrivilegedActionException: oracle.security.jps.service.idstore.IdentityStoreException: JP-01520: Cannot initialize identity store.
Any help would be greatly appreciated!
Thanks,
Chris
Edited by: ch**** on Mar 29, 2013 12:29 PM

We are using JBoss 3.2.5.
Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

Always error when try to save my item type on workflow builder

Similar Messages

Maybe you are looking for