Always facing the "Not Responding" issue while launching the internet explorer 11. I have tried reset in advanced, deleting all cookies, history and all. But no result.

Always facing the "Not Responding" issue while launching the internet explorer 11. I have tried reset in advanced, deleting all cookies, history and all. Also I did change the default site to https://www.google.com. But no result.
Some times after some time, able click on new tab and did open any urls. But it is rare. Please help me on this issue. Because of this unable to work with QTP/UFT tool.
I am getting on top of the screen the below error -
Error on top the ie screen :
res:/ieframe.dll/acr_error.htm#google.com,https://www.google.com/ - Internet Explorer (Not Responding)
I am getting at the bottom of the screen the below error -
Error at the bottom of the ie screen :
A problem with this webpage caused Internet Explorer to close and reopen the tab.

Hi,
Please refer to the following link to troubleshoot this issue:
http://msdn.microsoft.com/en-us/library/dn338138.aspx
Check the browser add-ons
Check the browser rendering mode
Then, please also make sure to install latest Windows Updates which might address this issue.
Update your anti-virus program and perform a security scan incase some virus cause this issue.
Yolanda Zhu
TechNet Community Support

Similar Messages

HT1918 i have recently moved from the uk to australia and cancelled my uk debit before the payment was processed for songs i bought in itunes. i have tried to edit my billing info with australian debit details but the site says 'invalid card' how can i fi

i have recently moved from the uk to australia and cancelled my uk debit before the payment was processed for songs i bought in itunes. i have tried to edit my billing info with australian debit details but the site says 'invalid card' how can i fix this?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Getting 'Page Not Found' error while launching the Workbook

Hi,
When the user is trying to launch a particular workbook in Discoverer Viewer by clicking on the Workbook name in the List of Workbooks page of E-Business Suite, he is getting the 'Page Not Found' error.
Did anyone faced similar issue?
Please let me if anyone knows the cause and solution.
Thanks,
Lokesh.

Hi Michael,
Thanks for your response, Actually the user is getting this error in E-business Suite.
The user will do the following before getting this error.
1) Logs into the E-business Suite with appropriate login credentials.
2) User will see the HTML Page which will show all his Responsibilities.
3) User clicks on the 'XXXXX GL Discoverer Viewer' responsibility
4) The HTML Page gets refreshed and the user will see the menu 'Discoverer Viewer' on the right side of the HTML Page.
5).User clicks on the menu item 'Discoverer Viewer'
6).A new HTML page gets generated which will display all the Workbook names to which the user(Responsibility) has the access.
6).Now the user clicks on a specific Workbook name to launch the Workbook.
7).User gets the 'Page Not Found' error.
The user is getting this error only for one Workbook,other Workbooks are not causing any problem, the user is able to launch other Workbooks from the same page.
I believe that E-business Suite generates the HTML Page with all the Workbook names and wondering why only one workbook is giving error.
Thanks,
Lokesh.

My Firefox won't quit and gives a "not responding" message after I use Google Mail. I have tried starting in "safe" mode and the problem still occurs.

I have an issue where Firefox wont' quit and gives a "not responding" message after I have been using Google Mail. It works fine when I am not using that program. I have tried Safe Mode and the problem still happens when I go to Google Mail, so it is not connected with add-ons, extensions, etc.

Many site issues can be caused by corrupt cookies or cache. 
Clear the Cache 
'''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''
 and 
Remove Cookies '''''Firefox/Tools > Options > Privacy.''''' 
Under '''History''', select Firefox will '''Use Custom Settings'''. 
There is a button on the right side called '''Show Cookies'''. 
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; '''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''. 
Poke around safe web sites and see if there is still a problem. Then restart.

On switching on, a message says 'Firefox is already running but not responding...........' then tells me to close it and restart but how can I close it when the page isn't yet displayed?

When I switch on my computer I get the desktop then I try to click on Mozilla Firefox but get the message, 'Firefox is already running but not responding. To open a new window you must first close the existing Firefox process or resart your system.' I looked up how to close but I need to click on 'file' then 'exit'. How can I do that when I can't see the page yet? IE is working fine.

See also [[Firefox is already running but is not responding]]

ITunes will not recognize my Apple password on my iPad. I have tried resetting the iPad.

I am trying to update some of the applications on my iPad. My email address recently changed. I made the appropriate changes in my Apple account. My Apple password is not being accepted when I try and use the update function on iTunes, eventhough the address had not changed. Furthermore the address displayed on the iTunes is the old address eventhough I have logged into my Apple account and made sure the email addresse and password is correct. How can I make iTunes accept my password and display my new email address?

Hey guys,
first of all: Sorry for my bad english
Here you can find the german version: http://www.netz-treff.de/forum/forum_entry.php?id=323268#e323268
I had the same problem, directly after updating my iPad2 to iOS6. Orientation lock was definitly not activited - I tested with software-lock from the dock and with hardware-lock on the side of the iPad.
I tried different ways to get back my screenorientation
First recovered the factory defaults, then restored from backups and at last I started it as a new iPad and not from an iCloud-Backup. I tapped the device (funny idea), but this didn't work also.
But now... it works!!
I runned the iPad-Power lower than less.
1% left and when the iPad was shuting down, I didn't connect the cable, I pushed the power-button again and again. The iPad shows the "oh, please charge me!"-Icon, but I didn't
Yesterday I pushed the power-button some times, but still didn't connect the cable.
Today I pushed the power-button 60 seconds and after that I tabbed all sides from the iPad (really funny idea, but I can't loose, so why not ) and then I connected the power-cable and charged the iPad.
After some hours I started the iPad ... and it works
Later, after finishing party, I restored to factory defaults again and restored a backup from iCloud from the time the screen orientation didn't work ... it workes.
Yeeeehhhaaaaa!!!

I live in Germany and have tried to download Dreamweaver trial version in ENGLISH and all I get is the download in German. How do I get it in ENGLISH?

I live in Germany, and speak German but not the technical German that Dreamweaver uses. I need the program to download in English. I have tried hitting the USA choice, and they re-direct me to the German site, and again the download is in German. All the teaching videos are in English and it is too big a challenge to try and figure out what they mean in German. I need an english language download. Can anyone help me? Thanks.

Thanks again, I tried it and it downloaded in English. Now if these 70 year old eyes can "see" maybe I can get something done.

I have tried to download premiere elements 12 twice now and all i get is the "read me" part. I bought the package with elements 12.

I bought premiere 12 in a package with elements 12 and can only download the "read me" and not the premiere programme itself...What is the problem...It said the download was successful but it bwas not. Elements 12 is OK and works fine but not Premiere 12.

Try downloading the offline installer(s) from http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
Make sure you follow the Very Important Instructions on that page.

On my ATV home screen the menu tabs for Movies does not show nor does Netflix under the Internet tab, I have tried reset etc but nothing works

I think I have a 1st gen ATV. The other evening I got the ubiquitous "Error-HDCP content etc, try again" message. When I logged back in later, the Movies tab was gone from the menu screen as was Netflix under the Internet tab. I have tried reset, restore, unplugging etc and nothing works, any thoughts?

Welcome to the Apple Community.
If you had/have Netflix, you have the Apple TV 2.
Check your iTunes Store location is set to the correct location.

I'm facing performance issue while accessing the PLAF Table

Dar all,
I'm facing performance issue while accessing the PLAF Table.
The START-OF-SELECTION of the report starts with the following select query.
    SELECT plnum pwwrk matnr gsmng psttr FROM plaf
    INTO CORRESPONDING FIELDS OF TABLE it_tab
    WHERE matnr IN s_matnr
      AND pwwrk = p_pwwrk
      AND psttr IN s_psttr
      AND auffx = 'X'
      AND paart = 'LA' .
While executing the report in the Quality system it does not face any performance issue...
When it comes to Production System the above said select query itself it is taking 15 - 20 minutes time to move further.
Kindly help me to over come this problem...
Regards,
Jessi

Hi,
"Just implement its primary Key
WHERE PLNUM BETWEEN '0000000001' AND '9999999999' " By this you are implementing the Primary Key
This statement has nothing to do with performance, because system is not able to use primary key or uses every row.
Jessica, your query uses secondary index created by SAP:
1     (Material, plant) which uses fields MANDT MATNR and PLWRK.
but it is not suitable in your case.
You can consider adding new one, which would containt all fields: MANDT, MATNR, PWWRK, PSTTR AUFFX PAART
or - but it depends on number of rows meeting and not meeting (auffx = 'X' AND paart = 'LA' ) condition.
It could speed the performance, if you would create secondary index based on fields MANDT, MATNR, PWWRK, PSTTR
and do like Ramchander suggested: remove AUFFX and PAART from index and where section, and remove these unwanted rows
after the query using DELETE statement.
Regards,
Przemysław
Please check how many rows in production system

Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

Try following the instructions here: [[Firefox hangs]]

HT5148 Protranscoder Tool not responding. What is the problem and how can I resolve the issue?

Why is the Protranscoer Tool always show not responding? I see the CPU is almost full when I am sharing to Blue Ray or Master File, and it shows the Protranscoder tool and the QTKit server not responding.

Did you ever figure this out? I have the same problem.

Issue while calling the RFC in SAP quality system but not in SAP Dev sys

Hi,
Our scenario is FIle-RFC-File.
We are calling the RFC from XI system in Development environment. This is working fine in Development environment, but not in Quality environment.
This changes are moved/transported to Quality environment in both XI and SAP side. But we are getting the following error in Quality system:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please provide the inputs, what we can check at SAP side and XI side.
We have tried to test from XI Development to SAP quality environment, but we are getting the same error message.
Waiting for the precious inputs.
Thanks,
Ramesh.

Hi Ramesh,
This might be because your RFC adapter would not have been configured properly. Just do a check on it,in RWB(adapter monitoring) and activate it once more in ID.
Also check RFC comm. parameters such as host name/user id/password etc..
Also check whether your XML document is having a mismatch with your RFC XML.
Check with your payload ( from SXMB_MONI) and test it in your message mapping.
All the best!
cheers,
prashanth
P.S Please mark helpful answers

Issue while fetching the file through *.extension by FTP sender file adapte

Hello Experts,
I am facing a issue while fetching the data through sender File adapter with ' *.file extension' .I am illustarting the scenario as below .
It is a simple scenarion of File to File inboumd scenarion.Here file is getting picked up from a third party system
through FTP sender chanel and stored in a temp folder of PI through NFS rceiver file adapter .
The problem is however I am getting, while picking the file with file name as "*.exo"(where exo is the file extension).
But while fetching the file with particular name like"abcd_10032011*.exo"(file naming has been done by combination of abcd(always same)_currentdate(change according to current date)),file picked successfully .
So here ,in the prior case file not getting picked up,but in later case it dose .
Can anyone please let me know what might be the issue?

Hi Sunit,
Connect from your PI System to 3rd Party System (where are placed the Source Files)
FTP <PartySystemHostName>
eg. FTP 10.2.3.456 (then insert Username & Password to Login)
Go to source directory
cd \<SourceDirectory>
eg. cd \donaldduck\directory\
Execute a File List command
ls -la *.<extension>
eg. ls -la *.exo
In this way you should be able to view all files with this extension (*.exo), the same action that Sap XI perform to pickup the file.
Then, try to copy that file to your Local PI System (to check if there're some permissions issue):
mget <filename>.exo
eg. mpget File1_01012011.exo

Issue while posting the invoice in background using the WF-BATCH user

Hi Friends,
I am facing an issue while posting the invoice in background using the WF-BATCH user. I am using a invoice approval workflow where in when the approver approvers the invoice the invoice document get posted using a background method, which uses BO FIPP and Method POST and i am returning the Message Text to my workflow container from this method. When i see the log an exception is rasied from this method with an error message "V004: You are not authorized to change this document", but WF-BATCH is having SAP_ALL and SAP_NEW authorizations. If i try to post the invoice using the method from my user id it is getting posted. What could be the issue. Please advice.

Hi Sapient,
The Parameter, Roles would be different for the LOGIN USER and WF-BATCH.. So ask your administrator
to set the Roles & Parameters similar to that of LOGIN USER to WF-BATCH.
For further refrence check in SU01 giving the LOGIN USER and then check with WF-BATCH... you would
find the difference...
Hope this would help you..
Good luck
Narin

Always facing the "Not Responding" issue while launching the internet explorer 11. I have tried reset in advanced, deleting all cookies, history and all. But no result.

Similar Messages

Maybe you are looking for