Am connected to wireless but can't connect to internet

I am connected to a wireless router (password protected). Full strength.  However, I cannot get onto the Internet, nor receive or send email.

System Preferences > Network > WiFi/Airport
what IP address do you have ?
(addresses in the 192., 172., and 10. range are "strictly private, so you are not revealing any secrets).
Addresses in the 169.254.xxx.yyy range are "self-assigned, and indicate you are not quite connected yet.
http://17.149.160.49
does the above get you to Apple mainpage?
does the below:
http://apple.com
If the upper one works but the lower one does not, you have Domain Name Server (DNS) problems.

Similar Messages

  • Connected to network but can't connect to internet using wireless

    Hi, I just installed a Linksys WRT 45G and can connect my pc and my laptop to it and use the internet fine when I use ethernet cable, but if I try to use my laptop wirelessly I can't connect to the internet.  It says that I am connected to my network and that strength signal is excellent but no internet connection.  I have that bluetooth button on the front of the laptop turned on.  The laptop is a Toshiba Satellite with Centrino.  I was told that I don't need to buy a wireless card as the Centrino already does this.  Thanks in advance for your help. 

    I think you can try to update the firmware of the router, to check if that stops connection dropping. To update the firmware of router try this: 1. Go to www.linksys.com/download and select correct model number and version number. Download the firmware and save it on your computer. 2. Check the file it sould be firmware image file like .bin etc. If it is a compressed zip file extract it to get firmware image file. 3. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. 4. Go to administartion tab there 5. Go to fimware update sub-tab there 6. Browse for the firmware image file and click update 7. when update completes turn off modem & router. 8. After 2 minutes turn on modem and after 2 more minutes turn on router. To get network key, connect your computer to one of the four ports on router using ethernet cable. 1. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. Use your password if you have changed it earlier 2. Go to wireless tab. 3. Go to wireless security sub-tab 4. If security mode is wpa or wpa2 note down passphrase/shared key, if security mode is WEP note down wep key number 1. This will be your network key Well you need to input all the wireless settings of your wireless network on Wii. To get these settings: 1. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. 2. Goto wireless tab. Here you will get the wireless network name/SSID. Here make sure wireless SSID broadcast is enabled. 3. Now goto wireless security sub-tab and here you will get the security mode and the security key. If security type is WPA note passphrase/shared key, and if its WEP note down wep encryption level and key 1 from listed 4 keys

  • HT4199 Problem Syncing with Itunes wirelessly but can still connect to wi-fi.

    I can access wi-fi from my Iphone 4s and the internet but can't connect to itunes wirelessly to sync the phone.  Was working fine and then just stoppped. Can stilll sync when plugged in but can't use certain apps that require wireless syncing only.

    First connect your iPhone to your computer, click on iPhone than check mark "Sync using Wi-Fi. There your problem is fixed. Make sure your computer and iPhone is connected to the same network.

  • Computer is connected to network but can't connect to internet (Safari and Chrome), e-mail, App Store, ect.

    My Macbook is connected to Wi-fi (four bars) but can't connect to the internet or any other services that requires internet. Other devices in my house have easily connected to the internet but every time I open Chrome it says: "This webpage is not available". What do I do?

    Restart your internet modem and router and your Mac then try Safari etc.
    If that doesn't help, try this DNS server ..
    Open System Preferences > Network > Advanced > DNS
    Click + and type:
    208.67.222.222
    Click + again and do the same.
    208.67.220.220
    Click OK.
    Try a browser.
    if that doesn't help, check the firewall.  System Preferences > Security & Privacy > Firewall > Firewall Options

  • HT2497 Connected to wifi but can't get on internet on MacBook Pro laptop

    Connected to wifi but can't use internet on laptop??

    Information.
    Can’t Connect to the Internet
    Can’t Connect to the Internet (2)
    Connect to the Internet – Solutions and Troubleshooting
    Connecting to the Internet - Solve Problems 

  • Can connect to LAN wirelessly but can not connect to the internet.

    The problem:
    I can connect to the wireless router and modem router wireless and can browse the router setting web pages etc without issue. However i can not browse the internet, send or receive mail etc.
    The setup:
    A Belkin/iinet modem connects to the internet (ip 10.1.1.1), a DLink 565 then broadcasts the signal wirelessly (ip 10.1.1.100).
    What i have tried:
    Trusty old powercycle
    I know the internet is working via the wifi as my ipod touch has full internet functionality through my wifi.
    I have tried using ip address instead of urls to browse the web to no luck.
    I have tried deleting Libary\Preferences\SystemConfiguration\preferences.plist
    I have tried reseting the DHCP lease.
    The only other thing i know works (eventually) is if i constantly change locations back and forth and turn airport on and off repeatedly, eventually i will get on the wifi but that can take upwards of an hour.
    The macbook also works fine via ethernet connected to the wireless router.

    Check these details:
    1. Right click your wireless connection
    2. Select STATUS
    3. Select the SUPPORT tab
    4. Select the DETAILS button
    You should see a page with all sorts of network details.
    Make sure that you see the following:
    1. You have an assigned IP address from your router
    2. You have a default gateway address -- typically the IP address of your router.
    3. A primary and alternate DNS server address (the router gets
    these from your ISP and passes them along during DHCP connect
    processing.)
    I found that step #3 did not happen reliably. Your mileage may vary. I set DNS server values into my router, based on what I got from my ISP, so that the connect-time data handoff was not required. A large part of my troubles went away.
    ~~~ Dan 0;-D

  • IOS7 update failure w/ error "Not Connected to Wireless", but I am connected- How can I update?

    My iPad has the defective "gotofailure" bug in iOS7, but there is only 1 pending update which describes a completely unrelated issue.  I am connected to my Wireless LAN, and that connection works fine.  But, when I try to download and install the pending update (Which may or may not have the major security hole fixed), the update fails with the error message "not connected to wireless".  How can I get someone at Apple support to tell me how to get around this problem?
    What am I supposed to do when the fix for a major bug is blocked by another (apparently minor) update?
    (note:  I am over the 30 day warranty, but within the 1 year warranty.  However, Apple support wants me to pay $20 to have them tell me how to fix their defective software... 
    I expect that the 1 year warranty should apply to defective software, especially this major security bug! 
    This bug completely compromises browser and internet security... it is a HUGE deal!
    see:  http://www.wired.com/threatlevel/2014/02/gotofail/   ).
    This is my first Apple product since the Apple 2E.  If this is the level of customer support and warranty for defects, hardware or software, that Apple provides, it may well be my last apple product. 
    I have worked in customer support at another major computer company, and this type of policy is the surest way to send customers to your competitors that I know of.  Tim Cook, are you listening? 
    (P.S.  Don't bother trying to get the attention of any Apple Executive - they don't want to hear from customers to provide feedback on their products or policies - not by phone nor by email.)
    Any workarounds for the problem or a way to update the iOS7 to fix the security hole will be greatly appreciated. 

    Hi...
    I think here the issue may be that the utility and the internet connection are not getting synchronised. The operating system on your computer is it win XP? If it is win xp, u can use the windows wireless software to manage to your wireless network. In order to use the windows wireless zero configuration, right click on the linksys icon at the bottom right hand corner of the task bar, select the option that says "use windows wireless ....".
    The linksys icon will be grayed and windows will be managing the wireless network. Connect to your wireless network and you should be able to go online.

  • Connected to WiFi but can't connect to internet

    Hi all,
    My iPod touch is connected to my secure home wifi network, the wifi icon is displayed with 4 bars, and I can use some wireless apps like Remote for itunes. I can connect to the internet on my laptop, but not my iPod. When I try to use safari/itunes/app store I'm told the device is not connected to the internet. Up to today everything had been working fine, and I haven't changed any settings. MAC filtering on the router is not enabled, I've tried turning wifi off and on again on the ipod, resetting all settings and turning the ipod on and off again but still no connection.
    Any help would be much appreciated!

    Reset the router, did the trick. Had the wrong IP address ie. 169.xx... rather than 192.xx.. Resetting the wireless router remedied this.

  • My ipod touch connects to wifi but can't connect to the server.

    Ok, so my ipod youch says it's connected to the wifi but when i try to get on the internet it says it can't connect to the server. I've looked and there's alot of answers but they're all soooooooooooooo complicated. I'm like 14, so whoever can answer this, please use small words.
    I've noticed in alot of the answers they talk about your IP adress, if it's any consilation mine starts with 169. No matter where I go, if it's at home, or at starbucks or a hotel.
    Thanks for your time

    Have you tried restoring your iPod touch in iTunes?
    You may just be trying to connect to "Printer Networks" that allow a company/residence to print something from their printer wirelessly, it would appear on your iPod touch just about the same as any other network, but you wouldn't be able to use internet while connected to that network...
    If you are talking about "free wifi" in a Cafe, like Starbucks, you will usually need to open Safari. A Page will load and tell you how to connect to their internet, whether it's by paying, or just agreeing to their terms...
    Like, I said, if that isn't the problem, try restoring your iPod touch in iTunes...
    -Messymeese
    Über Enbonpoint Pangolins FTW!

  • Airport connects to wireless network, can't get on internet

    Hi All -
    Having a weird problem. Set up new high speed wireless at home (ATT/Yahoo with a 2wire wireless router. Had NO problem setting up my MacPro (wired ethernet), MacBook (airport) and my wife's PC (I know, she's switching as soon as we can).. but for some reason my older Dual G4 with an Airport Card will NOT connect.
    The Airport seems to connect to the Wireless network NO problem. I enter the WEP password and I am in as far as Airport is concerned. But it won't connect to the internet.
    I tried like all the other machine to go into Network/Airport and set it up for DHCP just like all the other machines, however it gives a message in Network Status:
    "Airport is connected to the Network 2WIRE900. Airport has a self-assigned IP address and may not be able to cnnnect to the internet"
    When I go to show Airport, and choose "Using DHCP (like all the other comps) it has an IP that is not in the range of what is assigned by the router.. I never put that IP there, so I have no idea. I have tried to renew the lease, change to manual, then switch back to DHCP, etc. All to no avail.
    It also does not show the Router IP address either..
    I am really stuck and at a standstill as this Mac not only can't get online, but it has 3 500GB drives full of info I need to access from my other Macs.
    Any Help would be much appreciated.
    Thanks,
    Steve

    Hi Duane,
    Thanks for the reply.
    Yes, wireless mode is set to 802.11b/g
    I did not enable a MAC list. I see that option on the router but am unsure of if I should enable it or how to do so.
    It says:
    Tip: To discover new devices to be added, disable the MAC Filtering feature for one minute, then refresh this page. Once new devices are listed, re-enable the MAC Filtering feature and modify the list below.
    You can also add a MAC address manually.
    As I stated, I setup my MacBook with no problems. It immediately recognized the network and turning on DHCP the router assigned it an IP without a problem.
    Thanks,
    Steve

  • Wi-Fi connection is OK but can't connect to Internet

    I joined successfully my wireless lan (i have a router) but i can't connect to the Internet with iPod touch. I think that's because there is a "MAC protection" but i really don't know what's this and how can I set it on my iPod.
    Thank you in advance.

    If you don't know what "MAC protection" is then you probably never turned it on or set it up on your wireless router. What you are referring to is mac address filtering which would require you to enter the mac address of every wireless device manually into your router, in order for it to access your wireless network. Something I think you would have remembered doing. Just because the ipod is showing "connected" to your wireless router doesn't mean everything is working, setup correctly. On the ipod go to settings>wifi and tap the blue arrow to the right of the network name that you are connected to. What are all the addresses you are receiving there?

  • Connected to WiFi but can not get the internet

    I'm really hoping that someone can help. I bought my Ipad yesterday but am unable to connect to the internet. I have connected to my WiFi and have full signal strenght but when I go on Safari it tells me that I'm not connected. I have tried changing some of my settings but can only get as far as the message 'Cannot open page - Safari could not open the page because the server stopped responding' I also have the same problem with my Iphone and Ipod touch, I have never tried to sort these as don't need the internet on them. I have tried updating my Itunes and Ipad, both are now fully updated. My internet is working fine on any computer that is not apple... Please help, im pulling my hair out here.
    Many thanks

    What do you see if you go to Settings > WiFi and touch the ">" next to your network name?
    If you touch the ">" you will get the details of your network connection. Things like the type of IP address allocation (DHCP, Static, Bootp), assigned IP Address, Subnet Mask, Router address, DNS addresses, etc.
    Please report what you see there.
    Also please identify the make, model and type of router you have.
    Do you know what kind of security you are using on your router? None, WEP, WPA, WPA2?
    When you said, "I have tried changing some of my settings", what did you do?

  • Connected to network but can't connect to internet

    I'm connected to the network but I can't connect to the internet.  The network is working fine since my Xbox live is working with no issues.  Any ideas?

    I recomend turning off the router and the modem that you have and then turning them back on.
    If that doesn't work,
    Open system preferences > Network
    Go down to the bottom of the window and click Assist me
    A drop down window will come up and you want to click Diagnostics
    It will take you through the steps

  • My new ipad4 can connect to itunes, but can not connect to app store. Please help.

    Please help me to connect to app store for ipad4 but can connect to itunes. Thank you.

    AlexLee123456 wrote:
    Thanks for the help guys... iTunes is up and running (on my PC) however when I plug in the iphone it just doesn't connect to it, so I guess it must be itunes fault, however I have restarted my computer and this hasn't helped either
    The iPhone is still stuck in recovery mode?
    If the iPhone is not detected you will need to try other USB ports on the PC or try other USB cables. You could also try another PC/ Mac is you have one available to see if the PC is at fault.

  • I can connect to network, but can't connect to internet with aebs

    so i got a new Airport Extreme Base Station, hoping to replace my old og airport. i can connect to the new AEBS network easily, but i can't connect to the internet. with the old airport, i can connect to the internet no problem, hence i can write this post. "internet connect" tells me:
    +old, space ship looking airport:+
    connected to "myNetwork"
    connected to the internet via ethernet
    +new and improved AEBS:+
    Connected to "myNetwork"
    but that's it. any ideas would be greatly appreciated. oh also, it seems to be running pretty hot. is that normal? thanks!

    Hello mookyee. Welcome to the Apple Discussions!
    It's always a good idea to power recycle all of your network components when changing configurations ...
    Try the following, in order, checking for Internet access after each step, until resolved:
    1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
    2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
    3. Perform a complete power recycle of your network components as follows:
    Modem/Router Power Recycling - Quick
    o Power-off the modem, 802.11n AirPort Extreme Base Station (AEBSn), & computer(s); Wait at least 5 minutes.
    o Power-on the modem; Wait at least 5 minutes.
    o Power-on the AEBSn; Wait at least 5 minutes.
    o Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    o Power-off the modem, AEBSn, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    o Power-on the modem; Wait at least 15 minutes.
    o Power-on the AEBSn; Wait at least 5 minutes.
    o Power-on the computer(s)
    4. Contact your ISP to have them perform a "modem reset."

Maybe you are looking for

  • Only starting in safe mode

    Hi there I have an imac 8.1 that will only start in safe mode.When it does start it runs very slowly and I can't see a mouse pointer, so navigating around is a bit of an issue. I have reset the all the PRAM and the like, I have even swapped out the h

  • Help with syntax: Adding pages JS CS3

    I'm fairly new to scripting and I'm trying to write a script to add pages, inserting one after each existing page. We're doing postcards using a 4-up data merge. On the back of each card is the data merge/address (again, 4 to a page). Since the merge

  • Connection to ipod lost?

    I'm trying to sync my ipod to my computer to update my music. Everytime though it starts syncing then stops and says ipod cannot be synced because connection to ipod has been lost. I thought it was my cord so I switched that but I'm still getting the

  • Getting the tablespace name(its very urgent)

    Hi, Can anyone help me to get the query to find the tablespace used by the users in the database Its Very urgent please Thanks, Murali.V

  • Gnome 3 reports a network printer as "not connected",but prints fine

    Hi, I got the same problem mentioned here as "Other issue": https://bbs.archlinux.org/viewtopic.php?id=119248 When I print on my network printer it always says "printer is not connected" at first (popup in gnome shell) but then it prints fine. I thin