Am I able to tag a data point of a spreadsheet that is being created by a datalogging VI such that at the end I have the data with multiple tags which corelate to events during a measurement cycle

Am I able to tag a data point of a spreadsheet that is being created by a datalogging VI such that at the end I have the data with multiple tags which corelate to events during a measurement cycle
My final need is to take data from a datalogging VI and store it in a spreadsheet with tags that corespond to events in a subVI which is controlling motor movement. This will allow users to view all data and mark the relevent data for analysis. As usual, user want everthing but with conditions.

Sure. What you do is take the numeric value acquired, the tags you want, and build them into an array. So now, when you write to the spreadsheet, you'll have a 2D array. One thing you have to keep in mind is that all elements of an array have to be of the same type. So if your tags are strings, you'll have to convert your numeric data into strings as well.

Similar Messages

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory.

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory. Help! I can't access my iTunes content.

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory. Help! I can't access my iTunes content.

Pages is telling me that I need a newer version before I can open my document. I have the latest version and I am able to open older versions. Whats up?

Pages is telling me that I need a newer version before I can open my document. I have the latest version and I am able to open older versions. Whats up?

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has not only managed to confuse all its users, but also itself.
Note: Apple has removed over 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer. This happened after I agreed to a failed software update.

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Reserved fields in the catalog record have incorrect data???

I inserted the orginal installation disk for the Mac mini. I ran the verify disk. Then nine of these messages in red showed - "Reserved fields in the catalog record have incorrect data." I then did repair disk and now it shows that 1 volume could not be repaired. I have the MiniStack as well. I am assuming that the Hard Drive is the one needing repair. Not the MiniStack which also has OS installed along with Classic. How can I fix the disk? How important is the message in red?

You have directory damage.
Use Disk Warrior to repair the drive: http://www.alsoft.com
Explanation of what directory damage is and what causes it: http://alsoft.com/DiskWarrior/details4.html
The other option is to wipe your drive and re-install everything.

Missing the end of software maintenance date in Product Alert

Hi Expert,
In offline Product alert report, some of the items which has announced EOS or EOL, but the end of software maintenance date is missing, what does that mean?
Thanks,
Cristan

It means that the particular business unit within Cisco did not declare that milestone for the product on the Cisco.com end of life bulletin.

The selected signed file could not be authenticated. The file might have been tampered with or an error might have occured during download. Please verify the MD5 hash value against the Cisco Systems web site

I am trying to load any 9.0.3 firmware on my UCM 5.0.4.2000-1 server. Every newer firmware I load throws the following error. I have verified the MD5 is correct and also downloaded the file several times with the same result. I can load the same firmware file on another UCM server and it loads fine. Any ideas?
Thanks in advance!
Error Message:
The selected signed file could not be authenticated. The file might have been tampered with or an error might have occured during download. Please verify the MD5 hash value against the Cisco Systems web site: 9b:b6:31:09:18:15:e7:c0:97:9f:e6:fe:9a:19:94:99
Firmware File: cmterm-7970_7971-sccp.9-0-3.cop.sgn
UCM version: 5.0.4.2000-1

Thanks for your reply. We have a lab environment where I maintain UCM 5.0, 5.1, 6.0, 6.1, 7.0, 7.1 and 8.0 servers each running the latest released firmware for our QA testing team. I have downloaded and installed the latest device packages but find that if I try to install any firmware newer then 8.3.1 on either 5.0.4 or 6.0 i start getting MD5 hash authentication errors. It looks like 9.0.3 firmware should work on UCM 5.0 and 6.0 so I am lost as to why I can't seem to update any firmware for any model phone if it is newer then version 8.3.1 on either 5.0 or 6.0. while 5.1 and 6.1 work without issues. Maybe it is just a bug. I mostly wanted to see if anyone else has experienced this or if it is just me.

FYI DU error:"Reserved fields in the catalog record have incorrect data"

I had a very perplexing problem...
My iMac G5 was shutting down by itself so I took it to Apple and had the power supply replaced. After it was repaired I was concerned about the hard drive health after the unexpected shutdowns. So I ran Disk Utility and encountered the following...
The iMac G5 is running OS 10.4.6.
I ran "Repair Disk Permissions" from Disk Utility and encountered no errors.
I ran "Verify Disk" from Disk Utility on the drive and I get these results (copied from DiskUtility.log):
Verifying volume “TheDisk”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Reserved fields in the catalog record have incorrect data
Checking volume bitmap.
Checking volume information.
The volume TheDisk needs to be repaired.
Error: The underlying task reported failure on exit
Disk Utility stopped verifying “TheDisk” because the following error was encountered:
The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
This occurs whether I run it while booted from the hard drive or the restore disc. While booted from the restore disc, running repair disc indicates that the failure could not be fixed.
Booted from the hardware test disc and all tests passed.
Booted from TechTool Pro disc and all the tests passed.
Booted from Disk Warrior (had to get the "free" update to boot my iMac G5) and rebuilt directory. No errors reported.
Still same error reported in Disk Utility. ???
Booted iMac in 'safe' mode. Rebooted iMac normally.
Disk Utility now reports success!

Sorry but this is not assistance to you but an additional request for help from someone!!!
I had the same thing occur just now!!!! I have used everything in site and keeps returning............
Hope someone has an answer as to why this occured....

MI: the data objects in the SCV dont have the active DOE triggered adapter

We try to use SDOE_LOAD on MI7.1 to do the initial load.
However, we get the error:
"the data objects in the SCV dont have the active DOE triggered adapter."
We cannot find a fix anywhere.
Please help. thanks a lot!

Hi,
Assuming that you are using 7.1 in non-backward compatibility mode.
1. The client post the update/delete/insert request to DOE in bound queue.
2. The DoE post these messages to the BE.
3. Meanwhile, after posting all the message client starts reading outbound messages in DoE till the outbound queue is empty.
4. WHILE the client is reading outbound messages in 3. above the BE has validated the update/delete/insert request and posted a confirmation/rejection messages to DoE outbound queue the message will flow down to the client in the same sync cycle.
However, if it's posted to DoE after the client has finishing syncing with DoE the message will flow down to the client in the next sync.
So you see it cannot be guaranteed that the ocnfirmation/rehection message will flow down to the client in the same sync cycle.It may or may not happen.
I hope this clarifies.
Best Regards,
Amit

HT1212 Using the "if you have never synched with itunes" instructions, will I lose all data on the phone? That is the most important information, how to recover the data. The phone is fungible.

Using the "if you have never synched with itunes" instructions, will I lose all data on the phone? That is the most important information, how to recover the data. The phone is fungible.

Thanks @ KiltedTim, but losing "only" any data is really not acceptable and, in this case, the phone had not been backed up, but thanks for taking the time. Also, yes, fungible means what I think it means. An iphone is a completely substitutible commodity, unlike my data, so instructions that inform me as to how to fix a phone I could replace for a small sum of money while failing to address the more important issue of the data are almost useless - they potentially save me the $99 it would cost me to replace the phone if I were so inclined to trust another apple product. Not worth the hour it took to find them or the 35 minutes on the phone to confirm my suspicions about the data.

Ok, so I want to buy the new iPod touch 5g this week and I have an iPhone 4. I want to transfer all the data from the phone to the iPod and have the files the exact same. I don't want to redo data, say erase game data (campaigns, achievements)...

Ok, so I want to buy the new iPod touch 5g this week and I have an iPhone 4. I want to transfer all the data from the iPhone to the iPod and have the files the exact same. I don't want to redo data, say erase game data (campaigns, achievements)... I have apps that have very important data on them and if I sync it to iTunes and then transfer all that data to the iPod Touch 5g, will that erase app data?

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

How do I stop Mavericks from using the Internet, I have a DATA PLAN LIMIT!

Since installing Mavericks on our 2 iMacs our DATA PLAN is overused. Over 1.5 to 2.5 GB PER DAY! This is unacceptable!
How do I stop Mavericks from using the Internet, I have a DATA PLAN LIMIT!
HELP!

Have you seen this thread…
https://discussions.apple.com/message/23826437#23826437
The short story is that the new 'certifcate checking' system could be downloading large amounts of data, you can turn it of as follows…
clockworkapps wrote:
Turning off CRL & OCSP checking in the Certificates Preferences in Keychain Access solved the problem.
You can do as others have done, install Little Snitch & use the Network Monitor to view what is happening, that thread has some good advice. http://www.obdev.at/products/littlesnitch/index.html
@Topher, Activity Monitor is a bit pants for tracking processes that respawn or just go away (I assume its because it's an on-demand job, have you got a nice article on 'mach services', Linc confused me !? ).
ocspd seems to do that in my limited testing,
Little Snitch is the easiest way to monitor & you can get away with the free demo for long enough to test if funds are tight.

How can I convert 400 data points from a spreadsheet file to an array?

The spreadsheet file contains over 5000 data points (in one column) of which I only want the first 400 and want to convert them to an array in Labview. I tried to use the 'readfromspreadsheet' vi but it wasn't much help. Please tell me how i should approach this problem and what vi's to use.

I attach a model vi that you can experiment with. You will need to know the formatting of the data in your file, from there -plus the delimiter- you'll be able to estimate how many characters makes the first 400 data point. It's possible to develop a more robust vi to do this, in the mean time, the attached vi can quickly give some answer.
Attachments:
model.vi ‏28 KB

How can I use "write to spreadsheet" during the data is taking but not the end of all the loops

Hi,
I have to run an experiment on Labview 6 or 5. I don't have Labview 7 on that computer for some reason. My experiment is talking about 1000 hours, and I have a probelm on storing the data. Right now I am using "Write to spread sheet" and I set the "append" to false. And the data is installed at the end of the experiment, that means after 1000 hours. In the mean time if somthing oges wrong like power cut or what, I will lose all the data. So what I want to do is to save the data evertime when the data is took. I tired to set the "append" to true, but it does not let me to choose the "file path"--- when I choose this and select write on new or excisting file, it said" you may not be able to save on a exciting file" and it does not let me create a new file either. If anyone have the lidea like how can I use the "wrtie to spreadsheet" function and at the same time can install the data everytime inside the look, please let me know. Thanks alot.
KL

KL,
It sounds like you want to periodically save your data so it is in smaller files. (great idea) For this operation you will not want to append the data...if something happens to your system while the file is open it could become corrupt and ruin all the data. You need to write the new block of data to a new file every time. Now...this depends on how big your data is...if you only have like 500k of data to write in a block you should probably write several blocks before starting a new file. I don't know enough about how much data you are acquiring. In either case...the write to spreadsheet file.vi will need a different name each time it is called and you will not want to append. Append = false.
-Brett

How can I convert these 250 data points in a spreadsheet file into an array???!!!

I want to convert these points(see spreadsheet file attached) into a 1-D array of numbers and plot them using a vi. I am using the readfromspreadsheet.vi and it just gives me a number 4 and plots that. Please tell me what to do...I'm confused and have a project due!!!
Attachments:
ec1.xls ‏14 KB
test.vi ‏14 KB

Save the excel spreadsheet as tab delimited text file and use "Read From Spreadsheet File" vi to read it.

Am I able to tag a data point of a spreadsheet that is being created by a datalogging VI such that at the end I have the data with multiple tags which corelate to events during a measurement cycle

Similar Messages

Maybe you are looking for