Am i able to use 3g video calling service with my xperia P?

i cannot find 3g video calling option in my phn......where i get that....my model number is sony xperia P
Solved!
Go to Solution.

i cant use video call.is there any integrate software?if yes how can i find it?

Similar Messages

  • HT201177 When using Facebook video calling, why can I not see the image of the person I am speaking with but the other party can see my image.

    When using Facebook video calling, I am not able to see the image of the person I am calling but the other party can see my image. This problem just came up.

    When using Facebook video calling, I am not able to see the image of the person I am calling but the other party can see my image. This problem just came up.

  • I got a macbook pro 13 inch core i5  late 2011 , it came with osx lion  and i been using facebook videocalls normaly , now i updated to Mountain lion but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self  i c

    i got a macbook pro 13 inch core i5  late 2011 , it came with osx lion  and i been using facebook videocalls normaly , now i updated to Mountain lion
    but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self  i can hear my friends but cant see em, they also can see me and hear me but i just see me and hear them .
    any ideas ?

    Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
    http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510

  • I have copied videos onto an external hard drive. to free memory on my macbook. When I try to delete these I am warned that I will not be able to use this video in existing projects   How do I point iMovie to events in my external  hard drive so I can pl

    I have copied videos onto an external hard drive. to free memory on my macbook. When I try to delete these I am woarned that I will not be able to use this video in existing projects
    How do I point iMovie to events in my external  hard drive so I can play projects which use them?
    MacBook, iMovie 9.0.4

    Hi
    You can do this - by not doing it the way You describe as it will not work.
    a. the external hard disk - MUST BE - Mac OS extended (hfs) formatted -
    UNIX/DOS/FAT32/Mac OS Exchange - will work for most things - BUT NOT FOR VIDEO (iMovie, iDVD or FinalCut doesn't matter)
    b. Do not alter or move any folder named
    • iMovie Event's - or -
    • iMovie Project's
    on DeskTop/Finder - at all
    All moving's of Events and Projects must be done within the iMovie Application - then connections will not break.
    (move them back and see if iMovie remembers them - then do move as described above)
    Yours Bengt W

  • How can I use Google Video/Audio Chat with Snow Leopard?

    I'm a newly converted Mac-ian. So basically I don't know much about the how's and why's when it comes to Mac.
    I upgraded to Snow Leopard and although I was able to use Google video/audio chat before the upgrade, my problem is that now I am unable to do so even after reinstallation.
    Any one knows why that is and/or how to solve this problem?
    Mac OS X
    Snow Leapard
    Now Installed.
    Message was edited by: Mashael

    Google posted a Snow Leopared specific update to the video chat plugin during the weekend. You will need to re-install it manually by going to http://mail.google.com/videochat
    More info here: http://juberti.blogspot.com/

  • How can you expect the customer to have a LOCAL/COUNTRY Based Credit Card every where we go??? Last week I was on holiday in HK,  and  from my Hotel I was able to use m VN Credit Card with my Apple ID and purchase online!  Why THIS WEEK, can't I use my HS

    Apple_ID_card_declined_for_this_country
    How can you expect the customer to have a LOCAL/COUNTRY Based Credit Card every where we go???
    Last week I was on holiday in HK,
    and
    from my Hotel I was able to use m VN Credit Card with my Apple ID and purchase online!
    Why THIS WEEK, can't I use my HSBC Platinum Credit Card from Vietnam,
    for my Singapore Apple ID account ,
    while working here in Vietnam???

    Unfortunately, this is a problem that is driven by the DRM Dictatorship.  Despite the proliferation of mobile devices and the fact that there are many of us who do a lot of international travel, content providers don't want you to have access to their products outside of your homeland.  The Balkanized mentality of the DRM Dictatorship is way out of touch with the modern world.
    At least Apple, to its credit, allows you to use your accounts outside of your homeland as long as you have the proper credentials for them.  Most other services use the more Draconian geolocation filtering which does require you to be physically present in your homeland.  For the most part, you are not allowed to leave home if you want access to your favorite entertainment!

  • I am not able to use my external hard drive with my Mac.

    I am not able to use my external hard drive with my Mac. It was initially used with my Windows 7 laptop. Now when I insert my Hard drive in the Mac, it doesn't allow me to delete, format, make folders or copy new files on to my hard drive. I no longer have a Windows PC and am stuck. I tried going to Disc utilities,selected my HD, clicked on Erase and then changed the Format type to MS-DOS (FAT) but no luck .. Any other steps or advice?

    It was likely formatted in NTFS which is readable by the Mac, but not writeable.
    You should be able to reformat the disk in Disk Utility.
    After having copied all the data off of it, you can try re-partitioning it.
    Select the hard drive in the disk list in Disk Utility. Hard drives are the device itself, are left-aligned in the list, and are usually named with the manufacturer, size, and model number.
    Click on the Partition tab.
    Select 1-partition from the partition menu.
    Click the Options button and set to GUID
    Set the format to Mac OS Extended (Journaled)
    Give the Volume a name and click Apply.

  • I'm no longer able to use the projector VPL-ES4 with win7, he accuses error frequency

    I'm no longer able to use the projector VPL-ES4 with win7, he accuses error frequency.
    Working at a university here in Brazil Unicamp.
    Here we have several projectors model VPL-ES4, we were using this projector with win7 however a few days they all stopped to show the image of computers accusing problem in frequency, we made all the alternatives so that One can be reestablished TRANSMISSION signal however all were in vain, reading in many forums found equal to our cases and the solution presented was to use a computer with win98 and it really worked, but with the end of support for this version of the system we are failing to use it, I wonder how we can solve this problem and why even this ocrrendo.
    I thank you in advance for help and attention
    Rafael Marques

    archie0 wrote:
    Yes. NVIDIA+CRT+VGA cable = bad EDID.
    Here's what you can do. Fully remove the xorg.conf file. Regenerate them using nvidia-xconfig, Open the nvidia's GUI as root and just click "Save configuration", or something among those lines. Google your monitor's manual and find the RIGHT vertical and horizontal sync frequency ranges. After setting them in your xorg.conf log-out and log-in again. Go to the nvidia settings gui, you should be able to use a higher resolution.
    I've tried this a few times, but always end up with a "Signal out of range".  I think the trick is finding the correct ranges.  My monitor is a Soyo Topaz S 24", and I can't find any official manual or specs online.  What I have found is this:
    http://www.thinkcomputers.org/old/index … ews&id=733
    That review indicates:
    Frequency: Fh: 30 kHz - 80 kHz; Fv: 50 Hz - 75 Hz
    So I set:
    HorizSync 30-80
    VertRefresh 50-75
    Signal out of range, which is annoying because in order to fix it I either have to reboot using a live CD, mount the drive, or ssh into it.  Whoever started the trend of disabling ctl alt backspace to kill an xsession is not my friend...
    Some other forum posts about this monitor indicate that there may have been two variants, but I can't find a different set of specs.
    Last edited by vor_lord (2012-09-25 05:48:24)

  • Will you be able to use Siri on iOS 6 with the iPad 2?

    Will you be able to use Siri on iOS 6 with the iPad 2?

    http://www.apple.com/ios/ios6/siri/
    *Siri will be available only on iPhone 4S and iPad (3rd generation) and requires Internet access. Siri may not be available in all languages or all areas, and features may vary by area. Cellular data charges may apply.
    Major League Baseball trademarks and copyrights are used with the permission of MLB Advanced Media, L.P. All rights reserved.
    Now you know what we do.

  • If I buy contract free iPhone 6 from T-Mobile in USA, will I be able to use that phone in India with any other provider?

    If I buy contract free iPhone 6 from T-Mobile in USA, will I be able to use that phone in India with any other provider?

    Yes!! the contract free mean that it's GSM+CDMA so you can use it all over the world

  • I am not able to use my gprs data services in roaming

    i am not able to use my gprs data services in roaming....pls tell me how may i solve this problem

    Talk to your cellular provider.

  • Call service with url /sap/opu/odata/SAP/GBAPP_POAPROVAL is intermittent

    Hello,
    I have problem: call service with url /sap/opu/odata/SAP/GBAPP_POAPROVAL is intermittent, same times it works and same times not work to any type the Approve Orders.
    We are Fiori SAP NetWeaver 7.40 and mobile client is version 1.2.4.
    I used in IOS.
    We are SAML2 using ADFS with Fiori. 'Using SAML 2.0 Authentication to Access Fiori Apps from the Public Internet' in
    SCN:http://scn.sap.com/docs/DOC-42915.
    I try to run like example and the same 1797736 - Troubleshooting Guidefor SAP NetWeaver Gateway,
    and I tested this URL in the SAP Netweaver Gateway Client (http://scn.sap.com/docs/DOC-47626), but appears "HTTP Open falied: INTERNAL_ERROR"
    How to solve this problem?
    Thanks,
    Sandra

    hi,
    if you got 2004s preview from this page
    https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
    then it does not contain XI
    REgards,
    michal

  • Impossible to use "Connect to Data/Service" with BlazeDS

    Hi everybody, I'm work on FB4 since 3 weeks, but I have big problem to use "Connect to Data/Service" with BlazeDS.  each time I try to use it, it's the same question " You must define a BlazeDS server" and when I define the BlazeDS server and .war, I have the question again... You must define a BlazeDS server
    I work on Mac OsX Leopard and his java 6.
    Thanks for your help

    Hi,
    Thanks for your feedback
    Can you please tell us which version of Flash Builder4 and BlazeDS you are using.?
    Also, can you try the same workflow by using the turnkey version of BlazeDS(4.0.0.11428) with Flash Builder BETA2 build.
    Please let us know the outcome.
    Thanks,
    Balaji
    http://balajisridhar.wordpress.com

  • Hi I have started using MacBook Air. I updated my system yesterday, after that I am not able to have a video calling through Skype.

    Hi I am not able to have video call through Skype after software updation. Please

    Welcome to Apple Support Communities
    It's a known problem in OS X 10.8.5. Apple is working on a fix

  • Is i phone 4 video call that you said a face time can only be use for video calling i phone product only

    hi, i just want to ask you about your produce i phone 4 for the said face time or vedio calling. can it be used only for same i phone product or all the mobile in the world like nokia and blackberry

    ronrico wrote:
    as if you are mis leading the consumer......
    You aren't addressing Apple here. This is a user-to-user tech support site.  Apple doesn't participate here. We are all iPhone users like yourself
    There is nothing whatsoever misleading about how FactTime is described by Apple.  It works EXACTY as stated. If you are mislead, it's due to your inadequate reading comprehension or lack of effort reading what Apple actually said.
    There is no "international" standard for cell phone video calling.  Most other phones use proprietary systems or 3rd party apps such as Skype (which also works on iPhones).  FaceTime is on WiFi internet connections only because all carriers have refused to allow it on their cell networks due to the huge number of iPhones.  The FaceTime standard is open source and other manufacturers are free to implement it, but have refused so far.

Maybe you are looking for

  • Generate pdf file from 9i reports and save it in C:\oracle_reports\

    i want to generate a file from oracle reports in PDF format and want to save it on already defined path. c:\oracle_reports\ right now pdf generation of report is working fine but before generation of pdf report system prompt me or open a dialogue box

  • How can I sort my photos by title on the iPad

    Who kows, how I can sort my photos by title on my iPad. In my mac in iPhoto I can do so, and there are several options to sort. When I chose "sort by title on iPhoto, they are displayed in the wright way, but only on the mac not after sync. on my iPa

  • ICR Process 003 - Unassigned documents

    Hi, We have been live with the ICR module for three accounting periods now and have just encountered a serious issue.  There is an instance on one company where all the Payables documents between two particular trading partners are displayed in FBICR

  • Excution of a PL/SQL procedure with CURSOR for big tables

    I have prepared a proceudre that uses CURSOR to make a complex query for tables with big number of records, something like 900'000. And the execution failed; ORA-01652:impossible to extend the temporary segment of 64 in the space of storage TEMP. Any

  • Restore sites in Dreamweaver

    My Windows profile went on the fritz. I had to start a new one. I had many websites in Dreamweaver. How can I restore them? I copied 'C:\Documents and Settings\<profile name>-old\Application Data\Macromedia' to the new profile folder but the sites do