Am I the only one with these various problems...??

Hi all,
I start my first post and introduction ever on this forum with a imposing problem with Aperture 3.03
I just did the upgrade to Aperture 3 & 3.03. Coming off Aperture 2, I was able to rotate, crop and do all the things I wanted by just placing the pointer while clicking, holding, and moving all at the same time with no issues. With Aperture 3.03, no such luck. I've noticed that now if I want to rotate an image or even crop an image the first effort to move anything is ignored. It shows all the signs of being ready to move something, but nothing happens, nothing moves on first try. If I stop the click and place click the second time it is responsive as usual....What gives???
Here is another issue. Cropping is all over the place and never right on the first try. Even if I have a set aspect ratio it does not provide me with the one I selected. I'm always getting the wrong aspect ratio even though the right one is selected. If I pick "Master Aspect Ratio", I get a variable ratio instead of a fixed ratio??? If I click again it changes again. This program is not stable!!
One other thing has anyone noticed that you cannot use the arrow keys to move from one picture to another after editing the photo?? It is happening to me. If I complete an edit and want to move to the next photo, the program will not respond to key commands in any way. I'm forced to return to Browser mode and even then it seems hit or miss whether is responds to key commands again. navigating seems to be a big impediment when actively editing.
So, am I the only one with these problems???
Lets hear your story...
Note: just installed the newest stability update for Snow Leopard/Aperture 3 just made available on August 18, 2010. No change...
Steve,
Bethlehem, Pa.
Message was edited by: hdskullfire2

I don't see any of these issues! You have listed several, disconnected issues. Perhaps you should pick one of them, and give us a blow-by-blow of your action steps.
For rotation, click that button at the bottom of the View window, and then use one of the [ or ] bracket keys as listed for direction.
Ernie

Similar Messages

  • When my husband and I first bought our iPhones, I was the only one with an Apple ID (since he never used iTunes). He used my apple id to get apps. Now he has his own ID, but my account keeps popping up on his phone. How can we change the ID on his phone?

    When my husband and I first bought our iPhones, I was the only one with an Apple ID (since he never used iTunes). He used my apple id to get apps. Now he has his own ID, but my apple ID email address keeps popping up on his phone when he tries to download an app. We do not want to have all of the same apps on our phones. How can we change the ID on his phone? I already tried going to Settings>iTunes &App Store> and changing the Apple ID to his account email and that did not solve the problem. To make things worse, I recently changed my Apple ID email address (without getting a new ID) and I do not remember my old password (and this is the address that is popping up on his phone). He does not have any music on his phone and all of the Apps that he has are free.  Any help you could offer would be great (-:

    All apps are forever tied to the Apple ID that bought them. To stop your id from popping up, you need to delete the apps on his phone, and then repurchase them under his account.

  • I can't be the only one with this issue. MacBook Pro Retina Late-2013 WiFi disconnects after waking up from sleep.

    Did anyone buy a MacBook Pro Retina 13" from Best Buy this Black Friday?
    I'm having an issue where the WiFi disconnects after the MacBook wakes from sleep but only after a couple of minutes.
    Once the WiFi disconnects, I can't reconnect to the same network and sometimes it won't find nearby networks.
    I have to turn off the WiFi and wait for at least 5 seconds before turning it back on for it to auto-reconnect to my home network.
    If I wait less than 5 seconds, it will continue to attempt connection to the home network but won't connect.
    I've tried reformatting and deleting my network configurations as well as resetting my modem, power cycling it, etc.
    I am using 2Wire Gateway modem/router from AT&T on b/g network.
    I've tried connecting to a friend's network under Time Warner Cable and the same issue occurs.
    I exchanged the MacBook at a Best Buy for a brand unopened one (I hope) and the same exact thing happens with this new one.
    Really, I can't be the only one with this issue. Unless in a 0.00001% chance I received two defective units in a row?
    Please.. does anyone have a clue why this is happening?

    You're definitely not the only one.  I have the same issue.  I spent 6 hours over multiple days on the phone with Apple support trying a variety of things (some of which are mentioned above), and none of them worked.  They finally sent me a replacement laptop.  I made sure to try it periodicaly as I was moving files and installing applications to see if I ran into it again and things seemed okay at first but now I am running into the same issue and it is terribly annoying.  I've got 5 other devices that connect to the same router and I've never had this issue with any of them.
    My router is a Linksys E2000.  I haven't tried changing the router channel but I have tried to cnnecting to other networks in the building I live in and I have run into the same issue there.

  • Am I the only one with a dispatch date 19th July?

    I did order on 19th June anyone else waiting this long?

    I went to the Apple Store on launch day and bought my iPhone 4. No reservation, just went in and bought it. Much easier than pre-ordering. Enjoy the iPhone when you get it. iPhone 4 is excellent.
    Oh to answer your question, it's unlikely you are the only one with a specific date. If Apple were allocating one iPhone per pre order per day, the backlog would take until iPhone 26 to get through.

  • When actualized my iphone 4s to ios 6.0.1 music crash with or without phones. Apparently I'm not the only one with this issue

    when actualized my iphone 4s to ios 6.0.1 music crash with or without phones. Apparently I'm not the only one with this issue

         Hi Michael! Thanks for the reply
         I live in Norway, and the phone has been either provided by a Norwegian carrier, or bought unlocked from the Norwegian Apple Store. You can check yourself by going to Settings-General-About-Model and type the model number (MC133KN in my case) here: http://iphonefrom.com/en/MC133KN  But it`s unlocked, I placed a Lebara SIM in it and it works perfectly.
         If it has been carrier-locked then most(if not all) Norwegian carriers are selling the phones on a 12 months subscription contract. When the 12 months are up, the phone is being unlocked by the carrier either automatically, or upon customer`s request(depends which carrier you use).
         It`s good to hear that your 3GS works well with the iOS 6, still after having read about issues after upgrade I have a feel that the upgrade to iOS 6 may be a hit or miss.
         I read on a forum that early iPhones can only support 3 major upgrades. Can that be true?

  • Am I the only one with the mysterious black box?

    If more than one AA window is open (9.4.2, Win7)  and I try to draw with a polygon or other graphic tool, a black rectangle begins tracking my cursor, obscurring the graphic line I am trying to create. It grows to the scale of the polygon, etc., but disappears as soon as I stop drawing and the shape becomes inactive.  If more than one window has been opened anytime during a session, and I want to draw, I have to close the program and reboot in order to not have the problem. 

    Hi there,
    The good news is that M-Audio have just released a new set of drivers. Check out the following support article:
    http://www.m-audio.com/index.php?do=support.faq&ID=36be2fb74b90752fe3568b07c20a2 189
    While this relates specifically to Leopard, perhaps you were falling foul of some driver issue.
    Time to try updating your existing drivers and let us know. By the way, no, you were FAR from the only person with this problem. M-Audio have been very slow in getting drivers out. Let's hope this is now a thing of the past.
    Pete

  • Volume : Am I the only one with issues hearing calls

    Ok, I am about 75% done with my activation I can place calls just not receive them. So far I love the iPhone, other than activation (Not Apples fault). However I have a big problem hearing calls (Apples fault). Am I the only one having this problem?
    Apple please get us an update out soon that will fix this problem. There is no way this phone can work for me if I cant hear calls. I will be forced to return the phone and go back to my Razr. Other than this issue (and it is a big one) I love the phone

    NO! I thought that it was because i turned 30 this year! This *****! really bad! i love the iphone but i am totally gunna be FORCED! to return it if there is not a solution to this problem ASAP! ive noticed that talking to a person on a land line is the louder between talking to anyone on another mobile but still not load enough! THE ONLY WAY I CAN USE THIS PHONE FOR ANY KIND OF CONVERSATION IS WITH THE STEREO HEADSET IN BOTH EARS! hense cutting out any backgroud noise! Apparently there is no problem on the other end! everyone has said they can hear me fine! As far as the speaker! ridiculouse! i will nnot even attemt it unless im in a closed room! forget about using it in your car! you will hear a wisper!

  • Am i the only one with a HDMI adapter no longer working ?

    Hi. I own an Iphone 4 running ios 5.1.1. I used to be able to watch a video using my HDMI adapter when i was running ios 5.0.
    But i recently wanted to use it and i saw it would not work at all !!! I was running ios 5.0.1. Then i thought i should update my iphone to make it work again, but in vain, my adapter seems to work no more... I of course tried to restore my iphone and checked my hdmi cable. Am i the only one or am i the choosen one like neo ? Thank you !

    first of all
    apple don't read or write here so they will never "say anythign" here or read your posts
    this is a user helping user forum only
    you can get their ear using the feedback
    http://www.apple.com/feedback/
    don't own the hdmi adapter but got the component and composite ones and they work fine with my iphone4 with latests os
    what I would do if I was me
    first step of troubleshooting would be to reboot the phone
    http://www.apple.com/support/iphone/assistant/phone/#section_1
    second step then I would try another ios device that is supported with the device (of cause only iphone4s and ipad2 and up support mirror so for testing I use youtube as I know that support the tv out feature)
    trying out the other ios device would rule out that the cable is damaged and you just happend to notice around the time you updated os
    third step I would try other devices that use the pin30 cable to see if the connector in the iphone was damaged

  • Am I the only one with no problems with the froyo 2.2 update

    I did my update on 4/20 bout 10:30pm ny time it took bout 10 min to dl and bout 10 min for the install and what not, after that I updated my flash to 10.2 and tried out my new features, was amazed how fast it was like my phone was on redbull, everything is good battery life is bout the same if not better, not having issues like I been reading, so am I the only one, who else out there had no problems updating and no issues with it

    I updated my phone to 2.2. Almost everything seems fine. I now have Flash and it made some small improvements in a lot of features such as E-mail viewing is a bit nicer and web viewing is a bit better. Some background colors have changed. The phone seems to run apps a bit faster or improved in minor ways. The GPS Google Maps stuff works well as before. It did reset my phone personalization presets like my homescreen, a minor thing. One game app stopped working but I deleted and reinstalled it and it works fine. I kept all my music, contact list and data on the phone. Nothing lost. All in all I am very satisfied with the update and pleased. Thanks Verizon and Samsung, now please get to work on Gingerbread 2.3.

  • Why isn'y home sharing working? Am I the only one with this problem...

    I've watched about 12 youtube tutorials on how to use home sharing and none of them are working. ive redownloaded itunes and its still not working.
    what's going on !?
    Help!!!!

    Hi there,
    The good news is that M-Audio have just released a new set of drivers. Check out the following support article:
    http://www.m-audio.com/index.php?do=support.faq&ID=36be2fb74b90752fe3568b07c20a2 189
    While this relates specifically to Leopard, perhaps you were falling foul of some driver issue.
    Time to try updating your existing drivers and let us know. By the way, no, you were FAR from the only person with this problem. M-Audio have been very slow in getting drivers out. Let's hope this is now a thing of the past.
    Pete

  • After 10.4.8 - Am I the only one with NEW problems??

    After years of experiencing glitch-free connection to the Internet via our cable provider and my AEBS and AX - (3 laptops and a G5 iMac) after the latest update, it seems the whole system imploded.
    As I've posted here previously, after this "update" none of our laptops in our home would connect as they have before. Consequently, I unplugged everything from the system, reset the AEBS, and found (after troubleshooting) that it would connect ONLY if security was NOT applied. (Hence, I am running my network right now UNprotected, something I've never had to do.) If I gave the AEBS a name, and also applied security, NO connection.
    The second part of this problem is that at our small office at another site, which runs wirelessly on a LinkSys router, all three Mac laptops (two new MacBooks and my PowerBook G4) all connected seamlessly and received strong signals UNTIL the latest update. Since then, none of the Macs will connect, though it still recognizes the LinkSys network, however, there are NO bars to indicate any signal.
    The worst part of this is that the PC laptops in the office are still all connecting without a problem. One can just imagine the taunting we Mac users are tolerating at the moment while we are scratching our heads trying to figure out what's gone wrong!
    Another friend of mine, elsewhere, who uses a Mac laptop and G5 iMac emailed me recently and is also experiencing these same problems with his home-based AEBS and has had to forego security to get his AEBS working as I have done.
    Is Apple recognizing there is indeed a new, unresolved problem here?
    Rachel.

    I also have new p roblems with my airport connection. That may be related to the last system update
    An interesting diagnostic follows : it looks like the wireless network gets blocked for a few seconds, in a cycle. It does not happen from other wireless systems on the same network. Changing the access point (I bought a new one!) does not change anything, it's clearly related to the MacBook. A Powerbook G4 has the same problem. I really suspect the system update...
    The ping delay is set to 0.1 sec to display more clearly the pattern (the default 1 second is undersampled but shows the same behavior). sudo is required to have a delay < 1 sec.
    sudo ping -i 0.1 192.168.1.1
    PING 192.168.1.1 (192.168.1.1): 56 data bytes
    64 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=0.652 ms
    64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.592 ms
    64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=0.698 ms
    64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=1248.873 ms
    64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=1148.780 ms
    64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=1048.699 ms
    64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=1678.287 ms
    64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=1578.245 ms
    64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=1478.168 ms
    64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=1378.117 ms
    64 bytes from 192.168.1.1: icmp_seq=10 ttl=64 time=1278.042 ms
    64 bytes from 192.168.1.1: icmp_seq=11 ttl=64 time=1177.974 ms
    64 bytes from 192.168.1.1: icmp_seq=12 ttl=64 time=1077.884 ms
    64 bytes from 192.168.1.1: icmp_seq=13 ttl=64 time=977.882 ms
    64 bytes from 192.168.1.1: icmp_seq=14 ttl=64 time=877.815 ms
    64 bytes from 192.168.1.1: icmp_seq=15 ttl=64 time=777.712 ms
    64 bytes from 192.168.1.1: icmp_seq=16 ttl=64 time=1950.617 ms
    64 bytes from 192.168.1.1: icmp_seq=17 ttl=64 time=1850.564 ms
    64 bytes from 192.168.1.1: icmp_seq=18 ttl=64 time=1750.475 ms
    64 bytes from 192.168.1.1: icmp_seq=19 ttl=64 time=1650.478 ms
    64 bytes from 192.168.1.1: icmp_seq=20 ttl=64 time=1550.406 ms
    64 bytes from 192.168.1.1: icmp_seq=21 ttl=64 time=1450.333 ms
    64 bytes from 192.168.1.1: icmp_seq=22 ttl=64 time=1350.329 ms
    64 bytes from 192.168.1.1: icmp_seq=23 ttl=64 time=1250.307 ms
    64 bytes from 192.168.1.1: icmp_seq=24 ttl=64 time=1150.325 ms
    64 bytes from 192.168.1.1: icmp_seq=25 ttl=64 time=1050.166 ms
    64 bytes from 192.168.1.1: icmp_seq=26 ttl=64 time=950.037 ms
    64 bytes from 192.168.1.1: icmp_seq=27 ttl=64 time=850.035 ms
    64 bytes from 192.168.1.1: icmp_seq=28 ttl=64 time=749.995 ms
    64 bytes from 192.168.1.1: icmp_seq=29 ttl=64 time=649.978 ms
    64 bytes from 192.168.1.1: icmp_seq=30 ttl=64 time=549.998 ms
    64 bytes from 192.168.1.1: icmp_seq=31 ttl=64 time=450.020 ms
    64 bytes from 192.168.1.1: icmp_seq=32 ttl=64 time=350.083 ms
    64 bytes from 192.168.1.1: icmp_seq=33 ttl=64 time=250.049 ms
    64 bytes from 192.168.1.1: icmp_seq=34 ttl=64 time=150.061 ms
    64 bytes from 192.168.1.1: icmp_seq=35 ttl=64 time=50.048 ms
    64 bytes from 192.168.1.1: icmp_seq=36 ttl=64 time=0.630 ms
    64 bytes from 192.168.1.1: icmp_seq=37 ttl=64 time=0.606 ms
    64 bytes from 192.168.1.1: icmp_seq=38 ttl=64 time=0.672 ms
    64 bytes from 192.168.1.1: icmp_seq=39 ttl=64 time=0.670 ms
    64 bytes from 192.168.1.1: icmp_seq=40 ttl=64 time=1.060 ms
    64 bytes from 192.168.1.1: icmp_seq=41 ttl=64 time=0.599 ms
    64 bytes from 192.168.1.1: icmp_seq=42 ttl=64 time=0.646 ms
    <br>
    MacBook Pro + G5 + Powerbook G4   Mac OS X (10.4.8)  

  • Am I the only one with this problem Seconf Try for an answer

    Hi to all Encore 2.00 users
    I have searched the forums for a similar problem and have drawn a blank.
    Can anyone tell me why, when making changes to an Encore Project the sound tracks to the visual ( which are still there) will not play.
    For example changing the title of a button within a menu, or perhaps importing an extra sequence I find that I have to delete all the Audio from the various timelines and drag them in again from the project to make them play.
    Providing I make no changes the Encore Project is just fine.
    I would be very interested if someone could enlighten me as to why this happens.
    Best Regards
    Allan

    Hi, thanks for the reply but it doesn't happen to only one specific app, it happened with Clash of Clans, FIFA 14, etc.

  • Video Capture help...I can't be the ONLY one with this problem!

    Warning: Long post ahead!! I just want to make sure I'm providing detailed, complete information on my predicament. =)
    Okay...I am using a PowerBook G4 15" running OSX 10.4.8. I recently picked up the Canopus ADVC 110 in order to capture video from my game consoles...this is something I was doing a lot of for a LONG time with the graphics card on my desktop PC. But the card is pretty old now and the screenshots it takes don't always look so good anymore, plus I thought it would be cool to be able to do this with my laptop, since then it's like having a portable TV. The Canopus works...more or less. But I have some problems...
    The first is the lag. I have a splitter so I can output the S-video signal from the console to both my TV and other devices at the same time, and I've noticed there is a delay with the signal reaching my Powerbook screen through the Canopus (when doing the same thing with the PC graphics card, there is ZERO lag time between the TV and the PC). One of the reasons I wanted to do this - as I mentioned above - is to have another screen for gaming; my friends and I often have lan parties or simply have more than one game being played at the same time with a large group. The delay in the video/audio signal reaching the screen through the Canopus is very small, but in a fast-paced game it's crippling.
    Second problem is that I have had a very hard time finding a program that will simply let me view the video in full-screen. The REAL-TIME video, that is...I want to view in full-screen (or at least a really big window, if not ACTUALLY full-screen per se) as the video is coming in. Plenty of programs will let me record a clip and watch that in full-screen, but the incoming signal is constrained to a little tiny viewer window. Again, this is important for the "portable TV for video games" idea.
    Third problem: video quality. So far, the best quality has been obtained by iMovie, and for still captures, simply using OSX's screen grab function (shiftapple3 or 4) on iMovie, but even then everything still looks kinda grainy and fuzzy, the incoming video and the screengrabs. I tried a couple download programs, including BTV, which looked promising but turned out to be dissapointing with horrible screenshot quality and video quality in it's weird, screen resolutiong changing phony full-screen mode. All the screenshots I took with BTV have all these horizontal lines running through them. It's especially bad if the shot has any kind of movement in it.
    SO...I have overall been very surprised and frustrated at how hard it has been to do this. Especially considering how easy it was on my Windows-based PC. I just bought an ATI card with S-video and audio inputs, and it came with a program that allowed me to view video in full screen, record clips, and take stills all in the same program, with decent quality (stuff looks a little washed-out, especially now that the card is three years out of date, but it doesn't have fuzziness or lines like all the screens I've taken with the Canopus do) and absolutely zero lag time. With my newer, sleeker Mac laptop (and it's a MAC...the graphics/video/creative stuff powerhouse) it seems to be nigh impossible.
    I don't need a program with lots of fancy editing options, which all the ones I have tried seem to have. I just want to be able to view the incoming video in full screen, and take screenshots and clips with good quality.
    And elmininate the lag, if possible! I don't know if this is an issue with the Canopus (or would be an issue with ANY similar device) or if it's something that could be solved with a different program. Any and all help is appriciated!!
    PowerBook G4 15"   Mac OS X (10.4.8)  

    I'm using the tools which fullfill my needs best.. so, if the PC offers you "better" results, use it.. no dogma..
    delay: sure, the electronics have to digitize the video.. a process of high computation = time/delay ..
    quality: a TV signal fills about a quarter of my Mac's screen (or less) .. looking at it in "fullscreen" you have to blow up.. .every pixel get 4x4 pixel = low quality...
    and: you go from digital to analogue to digital .. there HAS to be a loss of quality ...
    BTV offers full-screen, doesn't it..?

  • Am I the only one with this problem? And is there a fix for this? What causes it to happen? More details in the description. Thanks!

    Hi, I have an iPhone 5s, sometimes when I'm using an app(game) I am unable to quit the app.
    The funny thing is: the app is still working fine, doesn't hang and I can still interact with it, but I just can't quit it or access multitasking( be it using home button or assistive touch)
    and
    I'll have to force shut down the whole phone(lock and he button together), which I dislike doing.

    Hi, thanks for the reply but it doesn't happen to only one specific app, it happened with Clash of Clans, FIFA 14, etc.

  • Is my Macbook Pro the only one with lousy wireless reception/coverage

    Hi,
    I was expecting great things when i received my Macbook Pro last week. I was also prepared to go through a lot of testing for sound issues and heat, as i've read from so many other posts (my MBP seem to have none of these issues in any major way).
    I used to work on my Powerbook G4 from 2005 which had a decent wireless reception (even compared to my wife's ibook G4).
    But this macbook has the worst wireless reception i've ever seen! When running istumbler on both machines (PB, and MBP) and placing them side-by-side i'm getting a major difference in signal strength.
    This is also basically what i see everywhere else with this MBP.
    At the same time the MBP has problems connecting to Closed networks (airport extreme AP) and apparantly also lots of other wireless issues with authentication.
    Am i the only experiencing this ?
    Best Regards,
    Lasse,
    MBP 2.16, Powerbook G4, Ibook G4, Ibook G3   Mac OS X (10.4.6)  
    Powerbook G4, Tiger   Mac OS X (10.4.2)  

    I'm curious, when did you get your MBP and what is the serial number of your MBP?
    Thanks
    i read early on that with the new antenna placement
    and whatnot that the macbook pro was going to get far
    better reception than the older powerbooks. this may
    be true, because i've seen some powerbooks get bad
    wireless reception, but my macbook pro gets about the
    same reception as my iBook G4. which is pretty good,
    so i'm not complaining ... i just think the "better
    wireless reception" was overhyped. as far as
    connection issues and dropping connections, etc.,
    i've had no problems so far, and i regularly use my
    MBP in 5 different open and closed wireless networks
    with different levels of security.

Maybe you are looking for

  • In the bookmark panel, how can I close all bookmarks files with one click?

    Every time I want to have just the files on the panel I have to close them on by one to have a genéral view of my bookmarks organisation. It would be so nice to have a feature to close everything with one click. But so fa I have been unable to find a

  • PO creation with reference to Purchase Requisition

    Hello, Is anyone aware of a control in SAP that allows for a warning message  when you create one or more PO's form the same requisition and the total quantity on the PO(s) is over the quantity on the original purchase requisition? Also can BAPI be u

  • Problem in  Oracle EM (Database Limits - Current Open Cursors)

    Hi everyone, I have a problem in Oracle Enterprise Manager in All Metrics. When I select in All Metrics e.g. Health Check > Maintenance it work's fine and I see a chart. If I select in All Metrics > Database Limits > Current Open Cursors Count I got

  • T400 speakers not working - headphone jack functional?!?

    That happened some weeks ago, no software or hardware changes were made prior to speakers gone mute. The other day however speakers were back from malfunction and operative again 100% - for no apparent reason, but as soon i plugged headphone jack in

  • Backup file too big using Disk Utility

    I need to back up my 160GB Mackintosh HD on my imac OSX 10.6.3 (Snow Leopard) using disk utility. After a short period of the imaging process I get a message saying 'file too big'. What can I do to resolve the problem? My external drive is 1TB with 5