Am stuck on 2g,3g doesnt works
Am stuck on 2g,3g doesnt works on my iphone 5 ios 6.1 from nepal. if i put my network to manual i can connect to 3g but still no working enternet. help me out am stuck.
Thank you
Am stuck on 2g,3g doesnt works on my iphone 5 ios 6.1 from nepal. if i put my network to manual i can connect to 3g but still no working enternet. help me out am stuck.
Thank you
Similar Messages
-
my iphone 4 is stuck on the reboot logo, ive ried holding both home and power to shut it off snd then keep holding home to let you plug it into itunes but it doesnt work. what do i do?
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore -
I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?
I have same issue. I click on the home button and Wake/sleep at the same time for 30 seconds or more and then the phone entered in Recovery mode. It is erasing my content now and installing the update. Let´s see how this ends. I have iCloud, iTunes match, and backups from previos versions, hope I can restore all my content.
Otherwise I´ll go to the Genius Bar to do a checkup.
Good luck!
It did not work the first time... The iPhone4 kept in limbo. Then I did disconnect as suggested above and tried again to enter in Recovery mode. This second time it works. And after restoring the iPhone4 with 7.0.3, it asked me if I want to recover from backup. I did recover from my latest back up and now it is syncing the content. -
i reset my iphone 4 and its now stuck on the apple screen ive seen people saying push the top button but my doesnt work can anyone give me some advice please
I'm not looking for any warranty help or something, I just want a diagnosys of my phone's situation....
My phone is acting as if there was no battery in the phone. When there is no cable plugged, nothing happens. When there is a cable, something happens (not a lot though....).
Could it be the battery port on the motherboard that's down ?
PS : I've taken a Genius-bar appointment because I can't stand in that situation for years, so I'm not absolutely looking to gain money and avoid Apple's official help. -
i have connected my phone to itunes and now my phone doesnt work its just got this thing stuck on my phone screen and i dont know how to fix it??
Wow I see from the other responses to similar questions that the phone may be jailbroken. I thought I was purchasing an unlocked phone that was legal to use with any system. What a disappointment, I will have to go back to where I purchased this phone and let them have an ear full.
-
hi im abishek and my ipod touh 4 g is stuck on white screen and holding he power and hoe button doesnt work.what should i do?????!!!!!
and also my ipod doesnt show upp on itunes so i cant restore it.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
what a nightmare,no phone for 3 days and no sign of any positive help from apple.done backup and restore as wifi on phone stopped working,error code 1 and now phone doesnt work at all,apple say other people having problem but havent heard of anyone else,really disappointed in way apple are keeping me hanging on,phone is only 4 mths old
My iphone is only 6 months old and I am experiencing the same problems. I have already had to have the phone swapped once with a phone that has a blown speaker. (The apple store is 2.5hours away so I havent been able to go back to replace the replacement) Since I did the ios 5 update, my phone says NO SERVICE and drops calls. It was speratic but last night, same ERROR message as you. As you know, if forces you to restore which caused me to loose valuable information and documents. insert loud profanity here _________. lol
-
Ms 8850 gf3ti200 pro-vt capture doesnt work one bit any more
i have the ms 8850 gf3ti200 pro-vt and i posted a wile
ago cause of probs with the capture now its realy bad now i cant even use it befor i tryed the drivers where going bad and if they where bad it reboots now it just DOESnt work wincoder trys to load and just hangs there. i disable the capture drivers it loads (but still cant use capture just to prove its not the software) but now it doesnt work all togeather i still have the warnty but my suplyer is up for sale and i cant contac them for help till they are sold. so im stuck looking else where ;( .
so if some one could help me get a hold of msi to contact them for help that would be greatly apreated.DMZio,
Did you install winCoder and WinProducer?
Also do you have the nVidia Capture Drivers loaded?
MS-8850
Good Luck,
Richard -
Replace content smart objects doesnt work properly.
Hello fellow Photoshoppers,
Currently i am working on reusable album templates with smart objects. At first i was very enthusiastic but this was soon to end. as the replacing doesnt work properly.
I made the smart object by using:
1. > file
2. > place
then i try to replace the content by using.
1. > layer
2. > smart objects
3. > replace contents
the old image should get replaced by the chosen file and matching size, smart layers etc. However when i perform the same actions my image gets replaced but it is not the same size as the smart object it replaced. This makes the entire template useless as it would take far too much time resizing every single image. inspired by another video I also tried double clicking the layer and tried replacing the image in the editing sceen by dragging another file on top of the smart object. Again, it does not spread out to the full smart object size and i'm stuck with a small image in need of extra work.
Needless to say, very frustrating.
Any thoughts?Are you sure you understood how it is intended work?
That is an interesting question, i have no experience with photoshop as i bought CS5,5 just a week ago and have no experience with any of the previous versions either. All info regarding how to make such a template i found from various tutorials, i posted one below. When they do it the image get scaled perfectly. Now since they use some smart filters in the tutorial i applied them aswell to see if this would fix the problem but it did not.
http://www.picturesocial.com/video/wedding-photo-album-templates
Are the images you want to switch in at least always of the same width to height-relation?
I checked both files for consistency and discovered they were shot on different camera's. One file ( the origional smart object ) was cropped form a 21,0MP file and the other was croped from a 10,1 MP file. Both images were cropped to a 2x1 ratio. Having discovered the difference in pixel amount i cropped a different 21,0 MP file to 2x1 ratio and checked both files for their exact dimensions (both images are equal in size with 5616 x 2808 pixels) and replaced the content with the newly cropped file which gave a much better result. However, the image was slightly smaller in photoshop leaving a small gap where the origionally placed smart object lined up perfectly. I turned the situation around and placed the 10,1MP cropped image as the smart object and replaced the content by a 21,0 MP cropped image. As to be expected i ended up with a new image much larger then the smart object. So the smart object does not constrain the files to the dimensions set. As it turns out it only scales the replaced content relative to the size of the origional content of the smart object.
I just need a reusable template with objects that:
- cannot be moved once locked ( if possible) but can have its content replaced
- scales the replaced content to the predefined dimensions
- needs no prework like cropping to the same aspect ratio as the smart object content. ( i want to be able to place a landscape sized raw (3x2) on any landscape format (2x1 / 16x9 / 4x3 or whatever) i find it acceptable to having to crop a portret to landscape orientation first before being able to replace a landscape.
now ive been searching for more info and some people say indesign is much faster in making album pages so I am installing the program as we speak hoping this will be the solution. -
My power button doesnt work how can i turn off my device
my power button doesnt work how can i turn off my device
Angel525,
I am sorry to hear about your phone being frozen. We want to make sure we work on this with you. You mentioned that you your power button is broken. Is it stuck or are you missing it? Please provide us details.
RobinD_VZW
Follow us on twitter @VZWSupport -
When I got my 4th gen iPod Touch, the camera worked fine for about 2 or so weeks. Then one day I tried to switch it to front view and it just froze, so I got out of it. Then when I got back into it, it stayed on the shutter screen and would go away! I have camera and video apps (because they camera doesnt work neither does the video) and they work fine, but they freeze when I turn the camera around. I also had to restore my iPod because it zoomed in and couldnt zoom back out even after I turned it on and off. So after I restored it, I went into the camera and it worked. I tried to turn it around and the same thing happened. Ive checked all the settings on my iPod too. How can I fix this!!
See this long-standing discussion on a stuck shutter:
Camera shutter issue: Apple Support Communities -
my 1month old e7 was worked properly... But now its camera doesnt work and it shows nothing.. But settings icons and other menu options are working well.. And front camara(3G) is working.. When i tryed to capture image.. Its prossesing (in same black background) and stuck.. What can i do..
Unexpected error occurred, please restart the camera, if this does not Help, try restarting the phone this message appears I try reinstall the firmware and nothing work!!! HELP
-
When i go to turn my imessage back on it just doesnt work
When i go to turn my imessage back on it just doesnt work
Is it just stuck waiting for activation?
If so, I would try to do these steps in here
http://support.apple.com/kb/ts4268
If nothing in there solves it, you may need to back you iPhone up to iTunes (on a computer).
Then go to setting < general < reset and choose 'erase all content and settings"
Then you'll go through the set up assistant 'make sure you set up 'as new' just so you can sign into iMessage and facetime.
Once the device is back to the home screen, re connect it to iTunes, and restore from your back up
Hope this helps -
My volume on my iPad doesnt work, when I press the voulme button it shows the headphones volume on the screen without any headphones being plugged in. Is there a fix for this?
Try going to settings> general > reset> reset all settings. If that doesn't work. Place a headphone jack in there and just pull it out a couple times. The problem is either your iPad setting is stuck or there is actually a hardware problem and moving the jack in and out might fix it
-
If itunes is installed the disk drive doesnt work
ive recently got a new laptop but everytime i install itunes the disk drive doesnt work.
when itunes is installed it doesnt recognise that i am putting disks in.
its really annoying, im stuck with the same songs old songs on my ipod!
if u culd culd help it would be much appreciated!i dont have itunes on my laptop at the moment so i have just been trying to install it again. but everytime i try it fails and doesnt finish the installation. it did this before and last time i did over 10 attempts until it worked, then wen it finally did install the disk drive stopped working. any advice? lol
Maybe you are looking for
-
For the past week, I have had to upgrade Adobe flash player 3 times. This is making me mad! Either I upgrade or I can't view videos. Why the ##@ does Adobe FORCE ALL USERS TO UPGRADE for minor bug fixes. Three times in a week is excessive! The Adobe
-
How to sync two iphones to single itunes
Two separate iphones with separate itunes accounts to buy apps and music - How to sync to itunes on imac?
-
Registration of several reference images in a test image using vision builder
I have downloaded the trial version of vision builder, and I am attempting a test to determine if it's worth buying: I would like to determine the position and orientation of two reference parts within a set of test images. I am able to load the ref
-
Flash videos and things that use flash freeze firefox completely.
Well, whenever I open a flash player, or something like that, most things that use flash player as a plugin, it freezes my firefox, and then, after awhile it may or may not say a script is causing problems yadda yadda.
-
NEWB: Premier CS4 & video not working
Hi, I've installed CS4 as a trial on an IBM think pad, that's a bit old and video was not playing. The sound was not able to start from different points and video was only a single frame. I figure, time to upgrade anyway's, I shop around and find a