Amavisd not running, mails not delivered when spam filter is enabled

Hey everyone,
So I've got a slight problem here with a 10.4.11 server. Our spam filter was set to be too tolerant of spam, allowing a threshold 22.0 before bouncing it, so through the command line I edited /etc/amavisd.conf to $sa_kill_level_deflt = 6.0; tag2 is set to 3.0. Then I bounced amavisd via:
sudo /bin/launchctl unload /System/Library/LaunchDaemons/org.amavis.amavisd.plist
sudo /bin/launchctl load /System/Library/LaunchDaemons/org.amavis.amavisd.plist
Well that caused all sorts of whacky issues with the queue. The server couldn't connect to itself and wouldn't deliver any mail, only queue it up. So I went back in to amavisd.conf and changed the parameters back to default, then bounced amavisd again. To no avail. Then I restored from a backup file I had created and bounced amavisd again to no avail.
Finally I removed the junkmail and virus filters via SA, saved, then reenabled them to no avail. Then I just disabled them and mail is flowing again, but I still have 187 messages in my queue that wont get delivered no matter how many times I flush it.
After more research, I issued a ps -U clamav to see if amavisd is running, below are the only results I get:
PID TT STAT TIME COMMAND
1291 ?? Ss 0:00.01 freshclam -d -D -pfreshclam.pid -c 1
I would assume it is NOT running...? I next issued amavisd to see if it throws any errors, and get the following:
ERROR: MISSING REQUIRED BASIC MODULES:
MIME::Parser
BEGIN failed--compilation aborted at /usr/bin/amavisd line 139.
So my next question is how do I repair amavisd so I can get it to run so I can reenable the content filter. Here are the results of postconf in case you need them:
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = postmaster
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
allow_min_user = no
allow_percent_hack = yes
allow_untrusted_routing = no
alternate_config_directories =
always_bcc =
append_at_myorigin = yes
append_dot_mydomain = yes
application_event_drain_time = 100s
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
biff = yes
body_checks =
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
broken_sasl_auth_clients = no
canonical_maps =
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
content_filter =
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_limit = 20
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 10000
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
disable_dns_lookups = no
disable_mime_input_processing = no
disable_mime_output_conversion = no
disable_verp_bounces = no
disable_vrfy_command = no
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
enable_errors_to = no
enable_original_recipient = yes
enable_server_options = yes
error_notice_recipient = postmaster
error_service_name = error
expand_owner_alias = no
export_environment = TZ MAIL_CONFIG
fallback_relay =
fallback_transport =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
hash_queue_depth = 1
hash_queue_names = incoming, active, deferred, bounce, defer, flush, hold, trace
header_address_token_limit = 10240
header_checks =
header_size_limit = 102400
helpful_warnings = yes
home_mailbox =
hopcount_limit = 50
html_directory = no
ignore_mx_lookup_error = no
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY
in_flow_delay = 1s
inet_interfaces = all
initial_destination_concurrency = 5
invalid_hostname_reject_code = 501
ipc_idle = 100s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_cache_connection = yes
lmtp_connect_timeout = 0s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_lhlo_timeout = 300s
lmtp_mail_timeout = 300s
lmtp_quit_timeout = 300s
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 120s
lmtp_sasl_auth_enable = no
lmtp_sasl_password_maps =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_send_xforward_command = no
lmtp_skip_quit_response = no
lmtp_tcp_port = 24
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_limit = 2
local_destination_recipient_limit = 1
local_recipient_maps =
local_transport = local:$myhostname
luser_relay = undeliverable
mail_name = Postfix
mail_owner = postfix
mail_release_date = 20040915
mail_spool_directory = /var/mail
mail_version = 2.1.5
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = flock
mailbox_size_limit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_size_limit = 0
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 1000s
multi_recipient_bounce_reject_code = 550
mydestination = $myhostname,localhost.$mydomain,localhost,mail.mnn.org,$mydomain,youthchannel.o rg,mnn.org
mydomain = mnn.org
mydomain_fallback = localhost
myhostname = mail.mnn.org
mynetworks = 127.0.0.0/8,192.168.0.0/16,216.164.83.160/27
mynetworks_style = host
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases
non_fqdn_reject_code = 504
notify_classes = resource, software
owner_request_special = yes
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /private/var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 1000s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix
receive_override_options =
recipient_bcc_maps =
recipient_canonical_maps =
recipient_delimiter =
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
require_home_directory = no
resolve_dequoted_address = yes
resolve_null_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix/examples
sender_based_routing = no
sender_bcc_maps =
sender_canonical_maps =
sendmail_path = /usr/sbin/sendmail
service_throttle_time = 60s
setgid_group = postdrop
show_user_unknown_table_name = yes
showq_service_name = showq
smtp_always_send_ehlo = yes
smtp_bind_address =
smtp_connect_timeout = 30s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_enforce_tls = no
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mx_address_limit = 0
smtp_mx_session_limit = 2
smtp_never_send_ehlo = no
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_threshold_time = 500s
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_randomize_addresses = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 120s
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $var_smtp_sasl_opts
smtp_sasl_tls_verified_security_options = $var_smtp_sasl_tls_opts
smtp_send_xforward_command = no
smtp_skip_5xx_greeting = yes
smtp_skip_quit_response = yes
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_cipherlist =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_scert_verifydepth = 5
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_limit_exceptions = $mynetworks
smtpd_client_connection_rate_limit = 0
smtpd_client_restrictions = permit_mynetworks reject_rbl_client zen.spamhaus.org reject_rbl_client bl.spamcop.net permit
smtpd_data_restrictions =
smtpd_delay_reject = yes
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
smtpd_hard_error_limit = 20
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_noop_commands =
smtpd_null_access_lookup_key =
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_pw_server_security_options = gssapi,cram-md5,login,plain
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,permit
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_application_name = smtpd
smtpd_sasl_auth_enable = yes
smtpd_sasl_exceptions_networks =
smtpd_sasl_local_domain =
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile =
smtpd_tls_CApath =
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 5
smtpd_tls_cert_file =
smtpd_tls_cipherlist =
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_key_file =
smtpd_tls_loglevel = 0
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_pw_server = yes
smtpd_use_tls = no
soft_bounce = no
stale_lock_time = 500s
strict_7bit_headers = no
strict_8bitmime = no
strict_8bitmime_body = no
strict_mime_encoding_domain = no
strict_rfc821_envelopes = no
sun_mailtool_compatibility = no
swap_bangpath = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_daemon_random_source =
tls_random_bytes = 32
tls_random_exchange_name = ${config_directory}/prng_exch
tls_random_prng_update_period = 60s
tls_random_reseed_period = 3600s
tls_random_source =
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps = $virtual_maps
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_mailbox_base =
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps =
TIA for an help!
Andrew

To get the queue going, issue:
sudo postsuper -r ALL
That said, I would think you initially introduced a typo in amavisd.conf. Next you probably restored amavisd and amavisd.conf files which were incompatible with each other and/or amavis incompatible with the updated perl modules of the latest security update.
To fix things, I would re-apply the latest combo updater and security updates (assuming you are running stock versions and have not installed your own versions of amavisd, etc).
If things still do not work, please post the output of:
amavisd -V

Similar Messages

  • The Flash Player is not running but it is there and it is enabled and Active X is not checked. The Player version is 16.0.0.305.  I have the latest ie11 and the latest W8.1. I have used the Adobe tool to delete the Flash and subsequently I have updated or

    The Flash Player is not running but it is there and it is enabled and Active X is not checked. The Player version is 16.0.0.305.  I have the latest ie11 and the latest W8.1. I have used the Adobe tool to delete the Flash and subsequently I have updated or reloaded Flash using your updater.  I have gone into IE options and insured that the settings are supportive of Flash.  The Adobe mini Flash test program on your site says it not enabled or Active X is enabled - not true - all is set as it should be.  I have gone through your forums but to no avail.  I've looked in MS forums but nothing that made any difference.  What's going on and what can I do about it?

    Try using Firefox. Flash usually works on Firefox when it won't on Safari. I noticed that the Safari does not show the same version as Firefox does. Iwonder if that could be the problem. Safari on the left shows 10.1, Firefox show 10.3

  • SCOM 2012 Issue The Data Access service is either not running or not yet initialized

    Hello All,
    My SCOM 2012 console all of sudden stopped working when I changed the size of the SQL database for the SCOM server.
    The setup is all on a virtual machine running windows 2012, with SQL 2012 running SCOM 2012 SP1. Everything was working until I made the SQL server database size change.
    Now I am getting an error when I try to open the SCOM 2012 console. It just says Failed to connect to server servername.internaldomain.com The Data Access service is either not running or not yet initialized. Check the event log for more information.
    here is the logs from the console app (the application logs are below this)
    Date: 2/11/2013 12:16:45 PM
    Application: Operations Manager
    Application Version: 7.0.9538.0
    Severity: Error
    Message: Failed to connect to server 'servername.internaldomain.com'
    Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
    net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.X.X:5724.  --->
    System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       --- End of inner exception stack trace ---
    Server stack trace:
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
       at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
       at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       --- End of inner exception stack trace ---
       at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
       at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
       at Microsoft.EnterpriseManagement.ManagementGroup.Connect(ManagementGroupConnectionSettings connectionSettings)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
       at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
    System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because
    the target machine actively refused it 192.168.X.X:5724.  ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       --- End of inner exception stack trace ---
    Server stack trace:
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
       at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
       at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
    System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.X.X:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    Application Error: Event ID:1000
    Faulting application name: Microsoft.Mom.Sdk.ServiceHost.exe, version: 7.5.2808.0, time stamp: 0x5082b3a5
    Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988aa6
    Exception code: 0xe0434352
    Fault offset: 0x000000000003811c
    Faulting process id: 0xb28
    Faulting application start time: 0x01ce088d19221739
    Faulting application path: C:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.Sdk.ServiceHost.exe
    Faulting module path: C:\Windows\system32\KERNELBASE.dll
    Report Id: 5a80a27e-7480-11e2-93fc-00155d01651b
    Faulting package full name:
    Faulting package-relative application ID
    .NET Runtime Error Event ID: 1026
    Application: Microsoft.Mom.Sdk.ServiceHost.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
    Stack:
       at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
       at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
       at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
       at System.Threading.ThreadHelper.ThreadStart(System.Object)
    I tried to reinstall the console and some of other mentioned things from the other posts but I think that there is a SQL issue here that I am not seeing. Can someone please help.
    Thanks
    Robert Lavigne Network Operations Manager - Kilobytes Data Solutions.

    Hi
    The issue got resolved after refresh the SCOM Data base access service  account in SQL 2012.
    Unable to launch the operations manager 2012 R2 console after extended the C drive of the SQl server ,getting error "The Data
    Access service is either not
    running or not yet initialized.
    Got to your SQL server -->databases-operationsmanager--security-users--locate the daa service account and refresh.issue fixed and am able to luanch.

  • The Data Access Service is either not running or not initialized.

    When I try to access the OPSMGR 2012 R2 console I get the error:
    Failed to connect to server "SCOM01.THG.local"
    The Data Access Service is either not running or not initialized.
    Date: 3/4/2014 8:41:07 AM
    Application: Operations Manager
    Application Version: 7.1.10226.0
    Severity: Error
    Message: Failed to connect to server 'SCOM01.THG.local'
    Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
    net.tcp://scom01.thg.local:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0045038. TCP error code 10061: No connection could be made because the target machine actively refused it 10.192.1.27:5724.  ---> System.Net.Sockets.SocketException:
    No connection could be made because the target machine actively refused it 10.192.1.27:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       --- End of inner exception stack trace ---
    Server stack trace:
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
       at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
       at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       --- End of inner exception stack trace ---
       at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
       at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
       at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
    System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://scom01.thg.local:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0045038. TCP error code 10061: No connection could be made because the target machine
    actively refused it 10.192.1.27:5724.  ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 10.192.1.27:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       --- End of inner exception stack trace ---
    Server stack trace:
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
       at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
       at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
    System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 10.192.1.27:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
    System Logs:
    The System Center Data Access Service service terminated unexpectedly.  It has done this 2 time(s).  The following corrective action will be taken in 60000 milliseconds: Restart the service.
    The System Center Data Access Service service terminated unexpectedly.  It has done this 5 time(s).  The following corrective action will be taken in 60000 milliseconds: Restart the service.
    The System Center Data Access Service service entered the running state.
    Application Logs
    Fault bucket , type 0
    Event Name: CLR20r3
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: microsoft.mom.sdk.servicehost
    P2: 7.5.3070.0
    P3: 520d7e93
    P4: System.Data
    P5: 4.0.30319.18408
    P6: 52310bef
    P7: 2622
    P8: 297
    P9: 2V4KQ41FR0ZKJA4HMDJUZUWAZMPSCBGF
    P10:
    Attached files:
    C:\Users\svc_scomdas\AppData\Local\Temp\WERB021.tmp.appcompat.txt
    C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DD.tmp.WERInternalMetadata.xml
    C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DE.tmp.hdmp
    C:\Users\svc_scomdas\AppData\Local\Temp\WERC65B.tmp.dmp
    These files may be available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_microsoft.mom.sd_bd8814a66c4798fbd871834494e962595894932_cab_0837c781
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: 55e1dff8-a3a4-11e3-9412-00155d01fa02
    Report Status: 0
    Hashed bucket:
    Fault bucket , type 0
    Event Name: CLR20r3
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: microsoft.mom.sdk.servicehost
    P2: 7.5.3070.0
    P3: 520d7e93
    P4: System.Data
    P5: 4.0.30319.18408
    P6: 52310bef
    P7: 2622
    P8: 297
    P9: 2V4KQ41FR0ZKJA4HMDJUZUWAZMPSCBGF
    P10:
    Attached files:
    C:\Users\svc_scomdas\AppData\Local\Temp\WERB021.tmp.appcompat.txt
    C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DD.tmp.WERInternalMetadata.xml
    C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DE.tmp.hdmp
    C:\Users\svc_scomdas\AppData\Local\Temp\WERC65B.tmp.dmp
    These files may be available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_microsoft.mom.sd_bd8814a66c4798fbd871834494e962595894932_cab_0837c781
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: 55e1dff8-a3a4-11e3-9412-00155d01fa02
    Report Status: 4
    Hashed bucket:
    Fault bucket , type 0
    Event Name: CLR20r3
    Response: Not available
    Cab Id: 0
    Application: Microsoft.Mom.Sdk.ServiceHost.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
    Stack:
       at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
       at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
       at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
       at System.Threading.ThreadHelper.ThreadStart(System.Object)

    can you please check the following -
    1) SQL services are running.
    2) Data access service is running. you can try restarting the service too.
    3) check that the OpsMgr database is not full.
    4) start the 'SQL Vss writer" service.
    5) check the sql server error logs.
    6) Check your SQL accounts too.
    7) Try this too -
    To create this registry entry, follow these steps:
    Click Start, click Run, type regedit, and then click
    OK.
    Locate and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
    Right-click Control, point to New, and then click
    DWORD Value.
    In the New Value #1 box, type ServicesPipeTimeout, and then press ENTER.
    Right-click ServicesPipeTimeout, and then click Modify.
    Click Decimal, type the number of milliseconds that you want to  wait until the service times out, and then click
    OK.
    For example, to wait 60 seconds before the service times out, type 60000.
    Quit Registry Editor, and then restart the computer.
    Thanks, S K Agrawal

  • The Data Access service is either not running or not yet initialized. Check the event log for more information

    Hi,
    I have SCSM with remote SQL and the SCSM Management server give below error
    Message: Failed to connect to server ‘Name of Server’
    Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. —> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://ServerName:5724/DispatcherService.
    The connection attempt lasted for a time span of 00:00:04.0070932. TCP error code 10061: No connection could be made because the target machine actively refused it IPAddress:5724.  —> System.Net.Sockets.SocketException: No connection could be made
    because the target machine actively refused it IPAddress:5724
    I had try to restart SQL & MS with same error,
    Also i had try the following
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/c670d54d-3a92-481f-8dc9-55c475ad196f/problems-with-data-access-service-after-rebooting
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/26dc1d5c-fa82-403f-8949-3073f3b82a60/the-data-access-service-is-either-not-running-or-not-yet-initialized
    Not help meRegards

    I had same error before 
    below steps to solve it
    Make sure SQL Server Running & ServiceManager Database not full
    Stop All SCSM Services,
               System Center Management Configuration
       Microsoft System Center Data Access Service.
       Microsoft Monitoring Agent
    Rename Health Service State to Health Service State_old --- @ "C:\Program Files\Microsoft System Center 2012 R2\Service Manager"
    Start SCSM Services
        Microsoft Monitoring Agent
               System Center Management Configuration
       Microsoft System Center Data Access Service.
    Wait 2 min...
    check Event Viewer... 
    hope this help you.
    Regards, Ibrahim Hamdy

  • The Data access service not running or not yet initialized.

    Hello guys , 
    i am getting the following error wen tryin to open the console The Data access service not running or not yet initialized. on scom 2012 R2 before it was working fine but once i closed the console and open got the error 
    OS : Windows 2012r2 patched and scom 2012 r2
    sql : 2012 r2 enuff database size  
    tried few things as :
    1. change the account to domain admin for system center data acess service  still no luck
    2. created registry keys for servicepipetimeout to 6000 bt still nit working
    3.  Refresh sql account used for sccom data aceess service  still no luck 
    4. the service disappears as running after 30 seconds and the console is unable to open 
    kindly help if some perfect resolution as lot of time has been wasted and need to meet deadlines.
    thanks guys in advance
    Basit Siddiqui
    AIG

    Check that following:
    Verify permission of SCOM Account on sysadmin and OM DB.
    Check firewall that is disable
    Check antivirus that didn't block scom folders or services.
    Check SQL services is running
    Check Space of database at 5 GB as you configured. It is best practice to set the db size at a reasonable size and not to set to autogrowth.
    Also you can check below link
    http://vmajmudar.blogspot.com/2013/07/the-data-access-service-is-either-not.html
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
    Technical | Twitter:
    Mai Ali

  • SCOM2012 R2 The Data Access service is either not running or not yet initialized check the event log

    Can U guys tell me the solution of it i am using scom 2012 R2 with sql server 2012 High availability solution
    Failed to connect to server
    The Data Access service is either not running or not yet initialized check the event log
    Date: 5/6/2014 5:27:49 PM
    Application: Operations Manager
    Application Version: 7.1.10226.0
    Severity: Error
    Message: Failed to connect to server 'PPLKHIHOV23.ppl.com.pk'
    Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
    net.tcp://pplkhihov23.ppl.com.pk:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020292. TCP error code 10061: No connection could be made because the target machine actively refused it 172.16.0.107:5724.  ---> System.Net.Sockets.SocketException:
    No connection could be made because the target machine actively refused it 172.16.0.107:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       --- End of inner exception stack trace ---
    Server stack trace:
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
       at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
       at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       --- End of inner exception stack trace ---
       at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
       at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
       at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
    System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://pplkhihov23.ppl.com.pk:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020292. TCP error code 10061: No connection could be made because the target
    machine actively refused it 172.16.0.107:5724.  ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 172.16.0.107:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       --- End of inner exception stack trace ---
    Server stack trace:
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
       at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
       at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
       at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
    System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 172.16.0.107:5724
       at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
       at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
       at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)

    Get "System Center Data Access Service" is running Automatic not manual and verify that SQL server is running and connectivity between SCOM and SQL is up and not slow for any application run on background.
    To make sure that no application take utilize connectivity between SQL and SCOM. Try to restart SQL and SCOM and check again.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Exchange Mail will not Send mail from Iphone when Desktop computer Shutdown

    A client of mine has an Iphone that I have setup to connect to his Microsoft Exchange 2003 Server using Activesync. Everything works fine and dandy until he shutdown his desktop in his office. Than he is no longer able to send any mail from his Iphone but is able to receive it no problem. Anyone have any insight on this problem?

    Your problem is with Cox and Cox not having an authenticated SMTP server.
    Not many ISPs provide an authenticated SMTP server and I'm not sure why - especially with laptops and devices such as the iPhone so popular.
    I'm a Time Warner/RoadRunner customer for cable and internet access and I quit using my RR email account several years ago for this very reason. I switched to using my .Mac account as my primary personal email account which has an authenticated SMTP server. I'm able to send messages with the account regardless the internet service provider used for internet access. My business POP account also has an authenticated SMTP server and no problems sending with this account either - via a number of different Wi-Fi connections and EDGE.
    I suggest seriously considering switching to another email account. A Gmail account is free, can be accessed as a POP or IMAP account with the email client on your computer as well as with the iPhone's email client, has a good spam filter at the incoming mail server, and has an authenticated SMTP server.
    If you ever move or decide to change your ISP from Cox to a different ISP, your email account and address will not need to change. You can access and send messages with a Gmail account with any ISP - the same with a .Mac account. And you'll have much more server storage space than Cox provides.

  • Beta 4 ver 6 installed on Mac Snow Leopard 10.6.4 will not run, will not delete, cannot reinstall any other version of mozilla, also mozilla help is useless and too confusing, is there not just a simple email address to ask for help?

    Firefox tries to run, mac says name too long. It will run only when mounted but will not run from Applications. It refuses to delete and stays in trash, must use combinations of DropNuke2 and Trash to get it to delete I think! Then when trying to put any other version of Firefox in Applications, Finder states name already exists then refuses to move the Firefox application to APplications! Never had problems with Firefox until installed the stupid beta 4 ver 6!

    It turns out that there's something wrong about permissions.
    Here's the fix:
    (1) log in as the +root user+
    (2) type +chown -R Michael:staff ~Michael+
    (3) log out the +root user+
    (4) log in your account
    (5) done!
    Hope this thread will help those who encounter the same problem as me!

  • Lightroom 5.7.1 64-bit will not run will not uninstall.

    Suddenly Lightroom 5.7.1 will not run. I get:
    Followed by:
    However, trying to uninstall just gives:
    ... and it never uninstalls.
    I'm getting very frustrated with this. Any ideas?

    Have you successfully Signed Out and back in to CC (or do you still have an error message on CC)?
    Sign out, Sign in | Creative Cloud Desktop app
    If not and you can't I'd guess it's still the CC that is the problem.  There have been similar issues preventing LR starting here on the forum in the past (do a search, it might help)
    After that I'd try the Technical Chat if you can't find anything on the CC forum (IMHO the forums are more likely to be able to help but it might take time).
    Contact Customer Care

  • Dhcpcd not running, network not available

    Jun 15 12:10:05 localhost dhcpcd[457]: dhcpcd not running
    Jun 15 12:10:05 localhost dhcpcd[463]: dhcpcd not running
    Jun 15 12:10:05 localhost dhcpcd[471]: dhcpcd not running
    Jun 15 12:10:37 localhost dhcpcd[476]: timed out
    Jun 15 12:10:41 localhost dhcpcd[599]: dhcpcd not running
    Jun 15 12:10:41 localhost dhcpcd[605]: dhcpcd not running
    Why does it do so and how do I fix it ?
    I mean, I can of course start it manually, but doing that on every reboot is ackward.

    Trilby wrote:
    MinimalBoot wrote:No, because I need wireless/GUI functionality.
    MinimalBoot wrote:I am using a wired connection
    WTF?!
    The fact that I need it doesn't explicitly mean that I am currently using it.
    Trilby wrote:
    MinimalBoot wrote:having any kind of network manager ( network, networkmanager, wicd, .. ) running should be enough
    Not for wireless it shouldn't.  But in either case, if you took my above advise, followed the wiki, tried reading the wiki, and followed the simple step by step instructions on connecting manually you would have easily pinpointed your problem and other users here could then help.
    I did pinpoint my problem - dhcpcd is not being started on boot, though rc.conf contains everything needed for this.
    Trilby wrote:
    The wiki page on wireless and/or network management is not 10 pages.  The wireless page may seem a little long, but a quick glance will tell you that it has various subsections that can be skipped depending on your wireless card.
    In the end, though.  If you aren't willing to spend a little of your own time reading the answers that are already availble, why on earth would I waste my time rewriting all those answers here?  So you could just ignore them again?
    Best of luck, I can't imagine you finding much help here with that approach.
    Excuse me ? If you are here just to brag about having an awesome Wiki page, please, don't waste your time.

  • Could not send mail using outlook when tethered (m...

    I have had a problem for a long time where I could not send email from my laptop when connected to the internet via a hotspot on my 3 mobile phone.
    After a long conversation with three where we determined that if I used three's SMTP server settings I could send email no problem, but once I was back on wifi i had to change my settings back to the BT settings (mail.btinternet.com), I decided to try and tackle BT support to get a resolution to the issue.
    I knew this would be challenge and that I would end up speaking to someone who could speak english but actually didn't really understand it, and Bt didn't disappoint!!
    I had a long online chat where it was explained to me that if I was connected via my 3g/4g connection I would have to use my providers SMTP because that is just the way it is. O.k. what did I expect!!
    Anyway I am just posting here so if anyone has the same problem I may be able to help you as I have now managed to get this up and running. How?? I hear you ask.
    In my case I used the mail checker on BT to see who's mail service I was with and it varified I was still with BT yahoo rather than BT Mail.
    I decided to try the yahoo setting for the SMTP server rather than the stock mail.btinternet.com and I am now up and running.
    My SMTP Setting is now -  smtp.mail.yahoo.co.uk (port 465 with SSL)
    Hope this helps someone else as I just could not find an answer by googling the issue.

    There is absolutely no reason why it shouldn't work using mail.btinternet.com port 465 with SSL. Works fine for me, albeit on O2 rather than Three, but the principle is the same.

  • My QuickTime will not run in Chrome even when enabled.

    When I want to preview a MIID file in Google Chrome, the links take me directly to the Downloads page and do not allow me to preview the file in its own tab.  However, when I do the same on my Windows XP computer, it opens a new tab and previews the file.  QuickTime is enabled on both computers, amd both are x86-based PCs.  What is going wrong?

    *MIDI

  • My videos will not run on firefox but when using Explorer everything runs fine. Why would this happen. Is there a fix or setting wrong when I use your service.

    I am not sure what other details are needed. Please let me know what specifics you might need.

    In order to be able to find the correct solution to your problem, we require some more non-personal information from you. Please do the following:
    *Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
    Now, a new tab containing your troubleshooting information should open.
    *At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
    *Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
    If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
    Thanks in advance for your help!

  • I downloaded FireFox, but can not Run, "Server not found " displayed

    I downloaded Firefox in Safe Mode (can not download in normal mode, it blocked by IE), when I run it , it displays, "Firefox can not find the server at www.mozilla.com"
    I wanted temporarily tun off the firewall to let Firefox in. I
    contacted my Anti-virus company Tech support, they did not give me an answer. Any solution?
    Greatly appreciate your help!
    C.Y.

    Thanks for the reply.
    We are still not able to figure out the reason, but the problem seems to orignate in the way swing handles repaint() events in JDK version 1.3. (Paint coalescing, see link below...)
    http://java.sun.com/j2se/1.3/docs/guide/awt/enhancements.html#coalescing
    Our application has multiple swing controls. Each control requests data from the model in its paint event. If model does not have the data it in turn opens a http socket connection to the server and gets the data.
    Our guess is that the calls which were previously sequential, are going simultaneously after coalescing was introduced in swing. But it does not explain why it works if client is not on server machine.
    Also, the application does not fail in a consistent manner. In most cases data does not come at all, but sometimes some controls do get the data. (If server and client are running on different machines, controls always get the data.)
    We have ruled out the possibility that the weblogic server is modifying the classpath or any environment variable at startup and resetting them at shutdown.
    We started server on two machines, machine1 and machine2 and opened a client in machine1 which accessed server running on machine2. Everything ran perfectly.
    Any help will be appreciated. We are all ready to handover to QA except for this inexplicible bug :(
    milinddev, can i send you a mail..... ? The posting has your email-address.
    Thanks again

Maybe you are looking for

  • Bug Report: #SQLERRM_TEXT# in Process Error Message

    According to the Online Help for "Process Error Message" #SQLERRM_TEXT# should be replaced by "Text of error message without the error number". But it isn't. Patrick My APEX Blog: http://inside-apex.blogspot.com The ApexLib Framework: http://apexlib.

  • Photoshop CC 2014 Crashes on Startup

    Hi, i have just finishing installing Adobe CC 2014, all application works perfect beside Photoshop.. one opening the software it crashes down and i dont know what seems to be the problem.. i am using MS Windows 8.1 64bit. once entering the Event Log

  • Mappings not triggered from Process flow?

    Hi, I have some mappings under a process flow..they are triggered daily but today they were not triggered can anyone tell me how to go about this?

  • BFILE Problem

    Hello, The problem that i have is that i want to insert a file residing in the network into the oracle database into a blob field and again read it from the database and show it ie either insert it into a file directly and then open it using the corr

  • ICloud account(s)

    Trying to get iCloud working i get this message: Never had a secondary account ever. What's wrong? Any solutions?