AMC IN THE MAINTENENCE ORDER
Dear Friends,
I am creating AMC which consists of External services activities and assigning the same with my maintenence order,So now my system says data is copied from the contract.
But actually only service is copied .
Other data like quantity and price,cost element are not copied.
Can any one tell me what is the issue? does it need any config settings?
Same is working fiine in my IDES system
Thanks and Regards
Dhana
I would request you to check ur frame work order. What details you have given in frame work order and check the same in your maintenance plan. Its the data you give in your frame work order which gets copied into your AMC.
after that the problem remains then plz revert back with more details of error which you are getting.
Similar Messages
-
DMS Object Link at Maintenence Order and Service order level
Hi SAP Gurus,
We had a requirement for maintaining DMS Object at Service order and maintenence order level, as Standard DMS does not provide any Standard Object link at Order level, we went for development and following the Standard procedure i could bring the Order Tab in CV01N Object Links, and also i could search the relavent maintenence order and maintain documents relevant to it,
But the biggest problem now is i could not create DIR from the Maintenence or service order screen IW31, and the document i have placed at the order is not visible in the order screen at all,
i know it is some sort of enhancement in the Order screen to allow DMS Documents to appear in the Order screen to provide this funtionality.
let me pls know what exactly has to be done, as there is no config at the order level to get the DMS Screen, as DMS is not a standard object at the order level.
one approch as suggested is modifiying the Order screen or using Screen Exit Enhancement for Order but not sure which one to use or how to move ahead,
Thanks n Regards
Priya SDear Christoph Hopf
Many Thanks for your answer,
i went through the said SAP Note, but it only speaks about the notifications level, where SAP itself has provided the standard DMS Object links, and iam in latest ECC-6 version where this note is taken care of i think,
iam looking for creating DMS Document (DIR) from the maintenence Order IW31 transaction screen, and have developed new Object link for Maintenence order,
but the main problem is, iam not able to create DIR from the IW31 Screen directly as Maintennce order is not a standard SAP Object,
please let me know how to get the list of documents that i have attached to a maintenence order to appear in the IW32 maintenence order screen, and also we need to create the documents (DIR) directly from IW31 / 32 screens.
Thanks and Regards,
PriyaS
Edited by: Priya S on Aug 19, 2009 1:50 AM
Edited by: Priya S on Aug 20, 2009 1:54 AM
Edited by: Priya S on Aug 24, 2009 6:24 PM -
How to change user status in maintenence order
Hi all,
I want to change system status in maintenence order by customizing kindly share how we can change it.Once you print the order, system status will get changed automatically to PRT.
What else you are expecting to change?? You can't change the system status by any business transaction as per your wish. System status changes have been defined by SAP directly. -
My iPod touch is not playing the songs on the playlists in the correct order. Can anyone help?
My ipod touch is not playing the songs on the playlist in the correct order.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Creation of Billing with reference to the Sales Order
Dear Friends,
I need your suggestion for the following scenario.
Client wants to create the Billing Document with reference to the Sales order.I mean when he is entering sales Order while creating the billing document ,the system should generate the billing document only for the delivered quantity.
e.g sales order is created for 100 Tons.And there are 5 delivery documents for 50 Tons.(Still the Sales order is open).
Now when billing document is created with reference to the sales order ( Not with reference to the Delivery Document) it should create the billing document only for these five deliveries.
Is it possible? If yes,how?
Thanks in advance.
Regards,
ShrikantHi Murali,
Currently client has software where he enters only Sales Order no and their software creates the billing for the delivery document for this Sales Order.
Here client does not want to enter multiple delivery document nos if any.He wants to enter only Sales Order no.
Regards,
Shrikant -
Promotion number in the sales order for free goods promotion.
Hi,
I have a business scenario in which "Sales Orders are created" for the customers in SAP IS Retail System.(This is for helpdesk ordering). In most of the occasions, free goods promotion would be running. The free goods promotions(exclusive) are maintained using promotion module in IS Retail system(condition type NA00). In this situation, the promotion number is not getting populated in the sales order automatically. Is there any specific configuration required or any BADI needs to be activated?
Note: Free goods item is getting generated automatically in the sales order with item category TANN.
Can any one advice pls.
Thanks and Regards,
SelvakumarHi selva
1)Check in Change Promotion T.code - WAK2
in the item level Promotion announcement category(Ann column) - set indicator as F Promotion announcement
2)Check sales periods dates - Sales order from to TO it should be valid date
if not works, reply me i will give some more solutions
regards
Satish -
Stock reserved against the Sales ORder is not valuation in MC.9.
Dear Experts.
The valuation done in Mc.9 doesnot match with MB5B -valuated Stock. We are having export material , which is make -to-stock scenerio. In this as soon as the production confirmation is done, the stock is alloted to the specified Sales Order.
The stock alloted to the Sales order doesnot get valuated in MC.9 report, where as the same can be seen in MB5B .
For Example.
MAterial - XYZ is in stock in storage location FG01 - 156 EA
against Sales ORder - 206 EA
Total Stock valuated in MB5B - 362 EA whereas in Mc.9 it valuates for only 156 EA.
Can any body guide .
Thanks
AVSHi,
In MC.9 stock is displayed based on periods in the selection screen
Please make sure you are slecting proper period
Thanks
Diwakar -
Product hierarchy is not being maintained in the sales order material
Hi,
I have an issue where the product hier is not being maintained in the sales order for some of the materials although the material master has the prod hier maintained.. The main program is SAPMV45A and I have checked all the exits in MV45AFZZ. In none of these exits the PRODH field in XVBAP is being populated. I would like top know if anyone has faced a problem like this.
cheers
AveekHi,
Thanks for your suggestion. The poduct hierarchy is maintained in the material master but not being picked up at the time of creating the sales order. I have found the solution and coding has to be done in the MV45AFZZ.
cheers
Aveek -
My photos in a folder are not in the correct order. How can I move them around?
I Am making an album of the life of an aunt. My photos are all in the wrong order. How can I move them around in the folder?
lets use the correct words so we do not mis-communicate
are you using iPhoto or the finder? Never touch your photos using the finder if you use iPhoto!
In iPhoto folders can not hold photos - folders hold only other folders or albums - albums hold photos -- within an album you can manually arrange photos as you wish -
Fields recorded at formscentral does not match the field order in form
Is it possible to change this? I know I can re-order them from within formscentral but is it possible to adjust form to send them in the right order in the first place?
Thanks,
DNot that I know of. You might have more luck asking the Acrobat Form forum
http://forums.adobe.com/community/acrobat/forms
Gen -
How do I get Iphoto to preserve the sort order when I transfer an album?
Here's my problem. I carefully sorted my album of 230 photos manually. Each photo was then numbered from 1 to 230. Then I used IPhoto Library Manager to transfer this album someplace else -- to my desktop, to a thumb drive, to Dropbox--- In every case, when I did that, the photos themselves transfered just fine, but the sort order I had so carefully constructed has fallen apart and cannot by retrieved. Even when I close and then reopen an Album I have transferred to my Desktop, it loses its sort order. This is driving my crazy because I need to transfer this album so that it preserves the slideshow I have designed for it. A slideshow, of course, demands preserving the order of the slides.
In short, how can I preserve the sort order of an album when I transfer it out of one library to another?If you're transferring to another library, why are you exporting to the Finder (which is what Desktop, thumbdrive and DropBox are). This doesn’t understand manual sorting from iPhoto.
Here's one (of several) way(s) to do what you want:
Make an Album of the photos, then drag the pics into your preferred order.
Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
Then File -> Export and in the Export dialogue set the Filename to "Use Title"
Sort on Filename in the FInder and you end up with a folder full of images in the same order as the Album in iPhoto. -
Any suggestions on how I can import an album without the songs going to alphabetical order? The last few times I have imported....I cannot get the play list to come up in the album order.
Hi there,
I'm having the same problem as this original post but reading the reply/answer i stil have no idea what has gone wrong or how to rectify it?
Never had a problem for years untill now.
Any other things this could be?
Thanks
Paul -
Not able to get the Quantity and partner details in the sales order created
Hi Experts,
I am creating a followup order using the FM "BAPI_BUSPROCESSND_CREATEMULTI" . The parameters iam passing are process type, quantity , sold to party (partner) and product ID. I am able to create a sales order but the Quantity and sold to party (partner) are not getting updated in the the sales order when i check in the transaction CRMD_ORDER. When i check in the crm_orderadm_h table and give the Headerguid , i am able to see the process type and when i check in the crm_order_index table, if i give the header i am not getting the partner no and there are two lines created for one header guid. I am providing the code which i have written. Can anyone please help me in this issue??
*& Report ZCREATEORDER_LUCKY_TEST
REPORT ZCREATEORDER_LUCKY_TEST.
DATA : LV_HEADER_GUID TYPE GUID_32,
WA_HEADER TYPE BAPIBUS20001_HEADER_INS,
ITAB_HEADER TYPE STANDARD TABLE OF BAPIBUS20001_HEADER_INS,
ITAB_CREATED_PROCESS TYPE STANDARD TABLE OF BAPIBUS20001_HEADER_INS,
ITAB_OBJECTS_TO_SAVE TYPE STANDARD TABLE OF BAPIBUS20001_GUID_DIS,
ITAB_PARTNER TYPE STANDARD TABLE OF BAPIBUS20001_PARTNER_INS,
LT_PRODUCT_I TYPE STANDARD TABLE OF BAPIBUS20001_ITEM,
WA_PRODUCT_I TYPE BAPIBUS20001_ITEM,
LT_SCHEDLIN_I TYPE STANDARD TABLE OF BAPIBUS20001_SCHEDLIN,
WA_SCHEDLIN_I TYPE BAPIBUS20001_SCHEDLIN,
ITAB_INPUT_FIELDS TYPE TABLE OF bapibus20001_input_fields,
ls_inputfields TYPE bapibus20001_input_fields,
WA_PARTNER TYPE BAPIBUS20001_PARTNER_INS,
ITAB_RETURN TYPE STANDARD TABLE OF BAPIRET2,
WA_OBJECTS_TO_SAVE LIKE LINE OF ITAB_OBJECTS_TO_SAVE,
ITAB_PRICING TYPE STANDARD TABLE OF BAPIBUS20001_PRICING,
WA_PRICING TYPE BAPIBUS20001_PRICING,
*To store the Objects to be saved.
WA_CREATED_PROCESS LIKE LINE OF ITAB_CREATED_PROCESS,
ITAB_SAVED_OBJECTS TYPE STANDARD TABLE OF BAPIBUS20001_OBJECT_ID,
WA_SAVED_OBJECTS LIKE LINE OF ITAB_SAVED_OBJECTS,
GC_X type c.
gc_x = 'x'.
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_32 = lv_header_guid.
CLEAR : WA_HEADER.
* Passing the respective values from the Header table to internal table.
WA_HEADER-GUID = LV_HEADER_GUID.
WA_HEADER-PROCESS_TYPE = 'ZTA'.
APPEND WA_HEADER TO ITAB_HEADER.
*Appending the values to the ITAB_HEADER.
*appending orderadm_i to input fields
* ls_inputfields-ref_guid = LV_HEADER_GUID.
* ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'ORDERADM_I'.
ls_inputfields-ref_handle = '0000000001'.
* ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'ORDERED_PROD'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
* ls_inputfields-ref_guid = LV_HEADER_GUID.
* ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'ORDERADM_I'.
* ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'MODE'.
ls_inputfields-ref_handle = '0000000001'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
****** CHANGES MADE
* ls_inputfields-ref_guid = LV_HEADER_GUID.
* ls_inputfields-REF_KIND = 'B'.
ls_inputfields-objectname = 'SCHEDLIN'.
ls_inputfields-ref_handle = '0000000001'.
ls_inputfields-fieldname = 'LOGICAL_KEY'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
* ls_inputfields-ref_guid = LV_HEADER_GUID.
* ls_inputfields-REF_KIND = 'B'.
ls_inputfields-objectname = 'SCHEDLIN'.
ls_inputfields-ref_handle = '0000000001'.
* ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'QUANTITY'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
* ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'B'.
ls_inputfields-objectname = 'SCHEDLIN_I'.
ls_inputfields-ref_handle = '0000000001'.
* ls_inputfields-logical_key = ' '.
* ls_inputfields-fieldname = 'MODE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
****** CHANGES MADE
WA_PARTNER-REF_GUID = LV_HEADER_GUID.
WA_PARTNER-REF_KIND = 'A'.
WA_PARTNER-REF_PARTNER_HANDLE = '0001'.
WA_PARTNER-PARTNER_FCT = '00000001'.
WA_PARTNER-PARTNER_NO = '10017'.
WA_PARTNER-KIND_OF_ENTRY = 'C'.
WA_PARTNER-NO_TYPE = 'BP'.
WA_PARTNER-DISPLAY_TYPE = 'BP'.
APPEND WA_PARTNER TO ITAB_PARTNER.
*"ADDING VALUES TO CT_ORDERADM_I
wa_product_i-header = lv_header_guid.
wa_product_i-handle = '0000000001'.
wa_product_i-ordered_prod = '12000014'.
wa_product_i-mode = 'A'.
APPEND wa_product_i TO lt_product_i.
*"ADDING VALUES TO IT_SCHEDLIN_I
wa_schedlin_i-GUID = LV_HEADER_GUID.
wa_schedlin_i-quantity = '30'.
wa_schedlin_i-handle = '0000000001'.
wa_schedlin_i-mode = 'A'.
APPEND wa_schedlin_i TO lt_schedlin_i.
* wa_schedlin_i-schedlines = lt_schedlines.
*"ADDING VALUES TO WA_PRICING
wa_PRICING-REF_GUID = LV_HEADER_GUID.
wa_PRICING-REF_KIND = 'A'.
* wa_schedlin_i-handle = '0000000001'.
APPEND wa_PRICING TO ITAB_PRICING.
* wa_PRICING-REF_GUID = LV_HEADER_GUID.
wa_PRICING-REF_KIND = 'B'.
wa_schedlin_i-handle = '0000000001'.
APPEND wa_PRICING TO ITAB_PRICING.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = '0001'.
ls_inputfields-fieldname = 'REF_PARTNER_HANDLE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = '0001'.
ls_inputfields-fieldname = 'PARTNER_FCT'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = '0001'.
ls_inputfields-fieldname = 'PARTNER_NO'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = '0001'.
ls_inputfields-fieldname = 'NO_TYPE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = '0001'.
ls_inputfields-fieldname = 'DISPLAY_TYPE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = '0001'.
ls_inputfields-fieldname = 'KIND_OF_ENTRY'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CLEAR ls_inputfields.
CALL FUNCTION 'BAPI_BUSPROCESSND_CREATEMULTI'
TABLES
HEADER = ITAB_HEADER
ITEM = lt_product_i
RETURN = ITAB_RETURN
PARTNER = ITAB_PARTNER
INPUT_FIELDS = ITAB_INPUT_FIELDS
CREATED_PROCESS = itab_created_process
SCHEDULELINE = lt_schedlin_i
PRICING = ITAB_PRICING.
READ TABLE ITAB_CREATED_PROCESS INTO WA_CREATED_PROCESS WITH KEY GUID = LV_HEADER_GUID BINARY SEARCH.
WA_OBJECTS_TO_SAVE-GUID = WA_CREATED_PROCESS-GUID.
* Appending the Guid of the contract to be saved to the internal table
APPEND WA_OBJECTS_TO_SAVE TO ITAB_OBJECTS_TO_SAVE.
CALL FUNCTION 'BAPI_BUSPROCESSND_SAVE'
EXPORTING
update_task_local = space
save_frame_log = GC_X
TABLES
objects_to_save = itab_objects_to_save
saved_objects = itab_saved_objects
return = itab_return.
* Calling the Standard BAPI to Commit the transcation.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'HEADER GUID: ',lv_header_guid.
Any inputs will be highly appreciated!!
Thanks a lot in Advance.
Lakshman.solved
-
How to get the open order quantity for a material
Hi All,
We need to get the open order quantity for materials. At present we are using the following logic...
SELECT VBAKVBELN VBAPPOSNR VBAP~KWMENG
INTO TABLE IT_VBAP
FROM VBAP
INNER JOIN VBAK ON VBAKVBELN = VBAPVBELN
INNER JOIN VAPMA ON VAPMAVBELN = VBAPVBELN
AND VAPMAPOSNR = VBAPPOSNR
INNER JOIN VBUP ON VBUPVBELN = VBAPVBELN
AND VBUPPOSNR = VBAPPOSNR
WHERE VAPMA~MATNR = IT_OUTPUT-MATNR
AND VAPMA~WERKS = IT_OUTPUT-WERKS
AND VBAK~AUART IN S_AUART
AND VBUP~GBSTA NE 'C'.
But the Query takes quite a long time as it does a full range scan on all the tables. Is there any way the query can be improved, may be by creating an index etc? Or is there anyother way by which i can get the required data?
Any input is appreciated.
Regards
Brain.This could help.
*& Report: zsdvr055 date written: 03/24/00 *
*& Author: Brian Huntley last update: 03/24/00 *
*& Program Title: Open Order Report *
*& Description: This report will create a list of sales documents *
*& that are open (contain at least one item that is not shipped). *
*& The report will sort by ship-to customer name and by sales *
*& document number. *
*& Tables: *
*& Files: *
*& Transactions: *
*& Changes: *
REPORT ZSDVR055 LINE-SIZE 255.
TABLES: VBPA,
VBAP,
VBUP,
VBAK,
VBKD,
KNA1,
VBEP,
VBFA,
LIKP,
LIPS,
EKET,
T171T.
define hashed table for selected ship-to and sold-to SO's
TYPES: BEGIN OF TVBPA_TYPE,
VBELN LIKE VBPA-VBELN, "sales document
POSNR LIKE VBPA-POSNR, "item number
PARVW LIKE VBPA-PARVW, "partner function
KUNNR LIKE VBPA-KUNNR, "customer number
END OF TVBPA_TYPE.
DATA: TVBPA TYPE HASHED TABLE OF TVBPA_TYPE
WITH UNIQUE KEY VBELN POSNR PARVW WITH HEADER LINE.
define internal table for all selected SO's
DATA: BEGIN OF ITAB0 OCCURS 0,
VBELN LIKE VBPA-VBELN, "sales document
END OF ITAB0.
define internal table for all selected SO items
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
MATNR LIKE VBAP-MATNR, "material
ARKTX LIKE VBAP-ARKTX, "description
PSTYV LIKE VBAP-PSTYV, "item category
KDMAT LIKE VBAP-KDMAT, "customer material
NETWR LIKE VBAP-NETWR, "net value
WAERK LIKE VBAP-WAERK, "currency
KWMENG LIKE VBAP-KWMENG, "quantity
ERDAT LIKE VBAP-ERDAT, "entry date
NETPR LIKE VBAP-NETPR, "net price
KPEIN LIKE VBAP-KPEIN, "pricing unit
PRCTR LIKE VBAP-PRCTR, "profit center
ERNAM LIKE VBAK-ERNAM, "entered by
AUART LIKE VBAK-AUART, "order type
VKORG LIKE VBAK-VKORG, "sales organization
VTWEG LIKE VBAK-VTWEG, "distribution channel
VDATU LIKE VBAK-VDATU, "requested date (header)
BNAME LIKE VBAK-BNAME, "name of orderer
KUNNR LIKE VBAK-KUNNR, "sold-to customer
BZIRK LIKE VBKD-BZIRK, "sales district
KURSK LIKE VBKD-KURSK, "conversion rate
BSTKD LIKE VBKD-BSTKD, "customer PO
LFGSA LIKE VBUP-LFGSA, "overall delivery status
FKSAA LIKE VBUP-FKSAA, "overall billing status
KUNWE LIKE VBPA-KUNNR, "ship-to customer
NAME1 LIKE KNA1-NAME1, "ship-to customer name
ORT01 LIKE KNA1-ORT01, "ship-to address
REGIO LIKE KNA1-REGIO, "ship-to region (state)
LAND1 LIKE KNA1-LAND1, "ship-to country
END OF ITAB.
create internal table for open orders
DATA: BEGIN OF ITAB1 OCCURS 0,
KUNNR LIKE VBAK-KUNNR, "sold-to customer
KUNWE LIKE VBPA-KUNNR, "ship-to customer
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
ZDATE1 LIKE VBEP-EDATU, "requested date
ZDATE2 LIKE VBEP-EDATU, "scheduled date (confirm)
ZDATE3 LIKE VBEP-EDATU, "committed date
ZQTY1 LIKE VBAP-KWMENG, "qty ordered
ZQTY2 LIKE VBEP-BMENG, "backlog qty
ZEXTD LIKE VBAP-NETWR, "backlog net value
ZDESC(30) TYPE C, "backlog description
END OF ITAB1.
define internal table for SO schedule lines
DATA: BEGIN OF ITAB2A OCCURS 0,
WADAT LIKE VBEP-WADAT, "planned goods issue date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
WMENG LIKE VBEP-WMENG, "qty ordered
BMENG LIKE VBEP-BMENG, "qty confirmed
END OF ITAB2A.
define internal table for SO item request dates
DATA: BEGIN OF ITAB2B OCCURS 0,
EDATU LIKE VBEP-EDATU, "delivery date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
WMENG LIKE VBEP-WMENG, "qty ordered
END OF ITAB2B.
define internal table for SO item commit dates
DATA: BEGIN OF ITAB2C OCCURS 0,
EDATU LIKE VBEP-EDATU, "delivery date
VBELN LIKE VBAP-VBELN, "document number
POSNR LIKE VBAP-POSNR, "item number
ROMS1 LIKE VBEP-WMENG, "committed qty
END OF ITAB2C.
define internal table for SO item deliveries
DATA: BEGIN OF ITAB3 OCCURS 0,
VGBEL LIKE LIPS-VGBEL, "sales document
VGPOS LIKE LIPS-VGPOS, "sales document item
VBELN LIKE LIKP-VBELN, "delivery number
POSNR LIKE LIPS-POSNR, "delivery item number
WADAT LIKE LIKP-WADAT, "planned GI date
WADAT_IST LIKE LIKP-WADAT_IST, "actual GI date
LFIMG LIKE LIPS-LFIMG, "actual qty delivered
ERDAT LIKE LIKP-ERDAT, "date created
ERZET LIKE LIKP-ERZET, "time created
END OF ITAB3.
define internal table for SO item / delivery cross reference
DATA: BEGIN OF ITAB4 OCCURS 0,
VBELV LIKE VBFA-VBELV, "sales document
POSNV LIKE VBFA-POSNV, "sales document item
VBELN LIKE VBFA-VBELN, "delivery number
POSNN LIKE VBFA-POSNN, "delivery item
VBTYP_N LIKE VBFA-VBTYP_N, "document category
RFMNG LIKE VBFA-RFMNG, "qty delivered
PLMIN LIKE VBFA-PLMIN, "plus/minus flag
END OF ITAB4.
define local variables
DATA: ORDR_QTY LIKE VBEP-WMENG, "order qty
CONF_QTY LIKE VBEP-BMENG, "confirmed qty
NOCONF_QTY LIKE VBEP-BMENG, "qty not confirmed
DELV_QTY LIKE VBEP-WMENG, "qty delivered
NODELV_QTY LIKE VBEP-WMENG, "qty not delivered
REMAIN_QTY LIKE VBEP-WMENG, "qty remain to get conf date
REQ_DATE LIKE VBEP-EDATU, "request date
COM_DATE LIKE VBEP-EDATU, "committed date
DELV_QTY1 LIKE VBEP-WMENG, "preceding delivery qty
REMAIN_QTY1 LIKE VBEP-WMENG, "qty remain to get reqest date
REMAIN_QTY2 LIKE VBEP-WMENG, "qty remain to get commit date
THIRD_QTY LIKE VBEP-WMENG, "3rd party no PO qty
SO_STOCK LIKE MSKA-KALAB, "sales order stock
ZPRICE LIKE VBAP-NETPR, "unit price USD
ADRS1(40) TYPE C, "concatenated city and region
ADRS2(45) TYPE C, "city, region and country
ADRS3(80) TYPE C, "name, city, rgn, ctry
ZCNTR TYPE I. "counter
define select options
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VKORG FOR VBAK-VKORG DEFAULT '1000',
S_VTWEG FOR VBAK-VTWEG DEFAULT '10' NO-DISPLAY,
S_SPART FOR VBAK-SPART DEFAULT '00' NO-DISPLAY,
S_KUNNR FOR VBPA-KUNNR MATCHCODE OBJECT DEBI,
S_KUNWE FOR VBPA-KUNNR MATCHCODE OBJECT DEBI.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
S_BZIRK FOR VBKD-BZIRK,
S_PRCTR FOR VBAP-PRCTR,
S_MATNR FOR VBAP-MATNR MATCHCODE OBJECT MAT1,
S_ERNAM FOR VBAK-ERNAM,
S_ERDAT FOR VBAP-ERDAT.
SELECTION-SCREEN END OF BLOCK BLK1.
AT SELECTION-SCREEN.
IF S_KUNNR IS INITIAL AND S_KUNWE IS INITIAL.
MESSAGE E005(ZM) WITH TEXT-100.
ENDIF.
MAIN PROGRAM
INITIALIZATION.
INCLUDE ZSYHEADR.
START-OF-SELECTION.
PERFORM 100_GET_SO_ITEMS.
PERFORM 200_GET_NO_DELIVERY.
PERFORM 300_GET_NO_GOODS_ISSUE.
PERFORM 400_GET_PARTIAL_DELIVERY.
PERFORM 500_GET_THIRD_PARTY.
PERFORM 900_CREATE_LIST.
FORM 100_GET_SO_ITEMS
FORM 100_GET_SO_ITEMS.
get SO's for selected ship-to and sold-to customers
REFRESH TVBPA.
IF NOT S_KUNNR IS INITIAL.
SELECT VBELN POSNR PARVW KUNNR
FROM VBPA INTO TABLE TVBPA
WHERE KUNNR IN S_KUNNR AND PARVW = 'AG' AND VBELN < '0080000000'.
ENDIF.
IF NOT S_KUNWE IS INITIAL.
SELECT VBELN POSNR PARVW KUNNR
FROM VBPA APPENDING TABLE TVBPA
WHERE KUNNR IN S_KUNWE AND PARVW = 'WE' AND VBELN < '0080000000'.
ENDIF.
DESCRIBE TABLE TVBPA LINES ZCNTR.
IF ZCNTR = 0.
WRITE: /1 'No data found for selection'.
STOP.
ENDIF.
eliminate duplicate SO's
LOOP AT TVBPA.
CLEAR ITAB0.
MOVE TVBPA-VBELN TO ITAB0-VBELN.
APPEND ITAB0.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM ITAB0.
get SO detail
SELECT VBAP~VBELN VBAP~POSNR VBAP~MATNR VBAP~ARKTX VBAP~PSTYV
VBAP~KDMAT VBAP~NETWR VBAP~WAERK VBAP~KWMENG VBAP~ERDAT
VBAP~NETPR VBAP~KPEIN VBAP~PRCTR VBAK~ERNAM VBAK~AUART
VBAK~VKORG VBAK~VTWEG VBAK~VDATU VBAK~BNAME VBAK~KUNNR
VBKD~BZIRK VBKD~KURSK VBKD~BSTKD VBUP~LFGSA VBUP~FKSAA
FROM VBAP INNER JOIN VBUP ON VBUP~VBELN = VBAP~VBELN AND
VBUP~POSNR = VBAP~POSNR
INNER JOIN VBKD ON VBKD~VBELN = VBAP~VBELN AND
VBKD~POSNR = VBAP~POSNR
INNER JOIN VBAK ON VBAK~VBELN = VBAP~VBELN
INTO TABLE ITAB FOR ALL ENTRIES IN ITAB0
WHERE VBAP~VBELN = ITAB0-VBELN AND VBAP~MATNR IN S_MATNR AND
VBAP~ERDAT IN S_ERDAT AND VBAP~PRCTR IN S_PRCTR AND
VBAP~ABGRU = SPACE AND VBKD~BZIRK IN S_BZIRK AND
VBAK~VKORG IN S_VKORG AND VBAK~VTWEG IN S_VTWEG AND
VBAK~SPART IN S_SPART AND VBAK~KUNNR IN S_KUNNR AND
VBAK~ERNAM IN S_ERNAM.
IF SY-SUBRC <> 0.
WRITE: /1 'No data found for selection'.
STOP.
ENDIF.
loop thru SO items
LOOP AT ITAB.
get ship-to customer
IF NOT S_KUNWE IS INITIAL.
CLEAR TVBPA.
READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
POSNR = ITAB-POSNR PARVW = 'WE'.
IF SY-SUBRC <> 0.
READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
POSNR = '000000' PARVW = 'WE'.
ENDIF.
MOVE TVBPA-KUNNR TO ITAB-KUNWE.
ELSE.
CLEAR ITAB-KUNWE.
SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
PARVW = 'WE'.
IF SY-SUBRC <> 0.
SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
WHERE VBELN = ITAB-VBELN AND POSNR = '000000' AND
PARVW = 'WE'.
ENDIF.
ENDIF.
IF NOT ITAB-KUNWE IN S_KUNWE.
DELETE ITAB.
CONTINUE.
ENDIF.
get ship-to customer address info
SELECT SINGLE NAME1 ORT01 REGIO LAND1 FROM KNA1
INTO (ITAB-NAME1, ITAB-ORT01, ITAB-REGIO, ITAB-LAND1)
WHERE KUNNR = ITAB-KUNWE.
MODIFY ITAB.
ENDLOOP.
SORT ITAB BY VBELN POSNR.
ENDFORM.
FORM 200_GET_NO_DELIVERY
get detail for SO items w/ no deliveries for order document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 200_GET_NO_DELIVERY.
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = A (not delivered)
IF ITAB-LFGSA = 'A'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select schedule lines for SO item and write to internal table itab2a
SELECT WADAT VBELN POSNR WMENG BMENG
FROM VBEP INTO TABLE ITAB2A
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
select sched lines w/request date and write to internal table itab2b
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
select sched lines w/commit date and write to internal table itab2c
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2A BY WADAT.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
ORDR_QTY = 0.
CONF_QTY = 0.
NOCONF_QTY = 0.
calculate the unconfirmed qty for a SO item
LOOP AT ITAB2A.
CONF_QTY = CONF_QTY + ITAB2A-BMENG.
ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
ENDLOOP.
NOCONF_QTY = ORDR_QTY - CONF_QTY.
LOOP AT ITAB2A WHERE BMENG <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB2A-BMENG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB2A-BMENG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB2A-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB2A-BMENG.
ITAB1-ZDESC = 'no delivery, confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDLOOP.
get request date for SO item
IF NOCONF_QTY <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING NOCONF_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING NOCONF_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = NOCONF_QTY.
ITAB1-ZDESC = 'no delivery, not confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 300_GET_NO_GOODS_ISSUE
get detail for SO items w/deliveries and no goods issue for
doc types (ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 300_GET_NO_GOODS_ISSUE.
get detail for deliveries w/no goods issue
SELECT VBELN WADAT WADAT_IST ERDAT ERZET
FROM LIKP INTO (LIKP-VBELN, LIKP-WADAT, LIKP-WADAT_IST,
LIKP-ERDAT, LIKP-ERZET)
WHERE WADAT_IST = 0.
select if actual qty delivered <> 0
CLEAR LIPS.
SELECT POSNR VGBEL VGPOS LFIMG
FROM LIPS INTO (LIPS-POSNR, LIPS-VGBEL, LIPS-VGPOS, LIPS-LFIMG)
WHERE VBELN = LIKP-VBELN AND LFIMG <> 0.
select if goods movement status on delivery = A (no goods issue)
CLEAR VBUP.
SELECT SINGLE WBSTA FROM VBUP INTO VBUP-WBSTA
WHERE VBELN = LIKP-VBELN AND POSNR = LIPS-POSNR.
IF VBUP-WBSTA = 'A'.
CLEAR ITAB3.
ITAB3-VGBEL = LIPS-VGBEL.
ITAB3-VGPOS = LIPS-VGPOS.
ITAB3-VBELN = LIKP-VBELN.
ITAB3-POSNR = LIPS-POSNR.
ITAB3-WADAT = LIKP-WADAT.
ITAB3-WADAT_IST = LIKP-WADAT_IST.
ITAB3-LFIMG = LIPS-LFIMG.
ITAB3-ERDAT = LIKP-ERDAT.
ITAB3-ERZET = LIKP-ERZET.
APPEND ITAB3.
ENDIF.
ENDSELECT.
ENDSELECT.
SORT ITAB3 BY VGBEL VGPOS VBELN POSNR.
loop thru deliveries w/no goods issue and get SO item detail
LOOP AT ITAB3.
CLEAR ITAB.
READ TABLE ITAB WITH KEY VBELN = ITAB3-VGBEL POSNR = ITAB3-VGPOS.
IF SY-SUBRC <> 0.
IF ITAB-AUART = 'ZZOR' OR ITAB-AUART = 'ZZC1' OR
ITAB-AUART = 'ZZCO' OR ITAB-AUART = 'ZZRP' OR
ITAB-AUART = 'ZZRW' OR ITAB-AUART = 'KE' OR
ITAB-AUART = 'KR' OR ITAB-AUART = 'ZCHP' OR
ITAB-AUART = 'ZPSO' OR ITAB-AUART = 'ZZNC'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select delivery qty for SO item and write to internal table
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
DELV_QTY = 0.
DELV_QTY1 = 0.
LOOP AT ITAB4.
IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
ITAB-AUART = 'KR').
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
determine if delivery for SO item precedes delivery w/no goods
issue (to determine request date and qty)
CLEAR LIKP.
SELECT SINGLE ERDAT ERZET
FROM LIKP INTO (LIKP-ERDAT, LIKP-ERZET)
WHERE VBELN = ITAB4-VBELN.
IF LIKP-ERDAT < ITAB3-ERDAT OR ( LIKP-ERDAT = ITAB3-ERDAT
AND LIKP-ERZET < ITAB3-ERZET ).
DELV_QTY1 = DELV_QTY1 + ITAB4-RFMNG.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDIF.
ENDLOOP.
get request dates for SO item
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
select sched lines w/commit date and write to itab2c
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
loop thru request dates and delete request date entries for
quantity(s) for preceding deliveries
REMAIN_QTY1 = DELV_QTY1.
LOOP AT ITAB2B.
IF ITAB2B-WMENG > REMAIN_QTY1.
ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
MODIFY ITAB2B.
EXIT.
ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
DELETE ITAB2B.
EXIT.
ELSE.
REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
DELETE ITAB2B.
ENDIF.
ENDLOOP.
loop thru commit dates and delete commit date entries for
quantity(s) for preceding deliveries
REMAIN_QTY2 = DELV_QTY1.
LOOP AT ITAB2C.
IF ITAB2C-ROMS1 > REMAIN_QTY2.
ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
MODIFY ITAB2C.
EXIT.
ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
DELETE ITAB2C.
EXIT.
ELSE.
REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
DELETE ITAB2C.
ENDIF.
ENDLOOP.
if planned goods issue date is 0, put qty in non-confirmed
get request date for SO item
IF ITAB3-WADAT <> 0.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB3-LFIMG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB3-LFIMG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB3-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB3-LFIMG.
ITAB1-ZDESC = 'delivery, no goods issue'.
ELSE.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB3-LFIMG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB3-LFIMG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB3-LFIMG.
ITAB1-ZDESC = 'delivery, no goods issue date'.
ENDIF.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 400_GET_PARTIAL_DELIVERY
get detail for SO items w/partial deliveries for document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 400_GET_PARTIAL_DELIVERY.
process SO items for selected order types
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = B (partially delivered)
IF ITAB-LFGSA = 'B'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
select delivery qty for SO item and write to internal table
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
DELV_QTY = 0.
LOOP AT ITAB4.
IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
ITAB-AUART = 'KR').
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDIF.
ENDLOOP.
select schedule lines for SO item and write to internal table
REFRESH ITAB2A.
SELECT WADAT VBELN POSNR WMENG BMENG
FROM VBEP INTO TABLE ITAB2A
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
get request dates from schedule line table
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
get commit dates from schedule line table
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
SORT ITAB2A BY WADAT.
loop thru request dates and delete request date entries for
quantity(s) already delivered
REMAIN_QTY1 = DELV_QTY.
LOOP AT ITAB2B.
IF ITAB2B-WMENG > REMAIN_QTY1.
ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
MODIFY ITAB2B.
EXIT.
ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
DELETE ITAB2B.
EXIT.
ELSE.
REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
DELETE ITAB2B.
ENDIF.
ENDLOOP.
loop thru commit dates and delete request date entries for
quantity(s) already delivered
REMAIN_QTY2 = DELV_QTY.
LOOP AT ITAB2C.
IF ITAB2C-ROMS1 > REMAIN_QTY2.
ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
MODIFY ITAB2C.
EXIT.
ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
DELETE ITAB2C.
EXIT.
ELSE.
REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
DELETE ITAB2C.
ENDIF.
ENDLOOP.
ORDR_QTY = 0.
CONF_QTY = 0.
NOCONF_QTY = 0.
calculate the unconfirmed qty for SO item
LOOP AT ITAB2A.
ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
CONF_QTY = CONF_QTY + ITAB2A-BMENG.
ENDLOOP.
NOCONF_QTY = ORDR_QTY - CONF_QTY.
NODELV_QTY = ORDR_QTY - DELV_QTY.
loop thru schedule lines and process entries with no related
delivery(s)
REMAIN_QTY = DELV_QTY.
LOOP AT ITAB2A.
IF ITAB2A-BMENG <> 0.
IF ITAB2A-BMENG <= REMAIN_QTY.
REMAIN_QTY = REMAIN_QTY - ITAB2A-BMENG.
ELSE.
ITAB2A-BMENG = ITAB2A-BMENG - REMAIN_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING ITAB2A-BMENG REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING ITAB2A-BMENG COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = ITAB2A-WADAT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = ITAB2A-BMENG.
ITAB1-ZDESC = 'partial delivery'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
REMAIN_QTY = 0.
ENDIF.
ENDIF.
ENDLOOP.
if total unconfirmed >= total not delivered, qty is unconfirmed
IF NOCONF_QTY >= NODELV_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING NODELV_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING NODELV_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = NODELV_QTY.
ITAB1-ZDESC = 'partial delv, not confirmed'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
IF ITAB-AUART = 'KR'.
ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
ENDIF.
APPEND ITAB1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 500_GET_THIRD_PARTY
get detail for third party SO items
FORM 500_GET_THIRD_PARTY.
process SO items for selected order types
LOOP AT ITAB WHERE PSTYV = 'TAS' AND ( AUART = 'ZZOR' OR
AUART = 'ZZC1' OR AUART = 'ZZCO' OR AUART = 'ZZRP' OR
AUART = 'ZZRW' OR AUART = 'KE' OR AUART = 'KR' OR
AUART = 'ZCHP' OR AUART = 'ZPSO' OR AUART = 'ZZNC' ).
select if billing status <> C (billed)
IF ITAB-FKSAA <> 'C'.
assign values to detail fields
CLEAR ITAB1.
ITAB1-KUNNR = ITAB-KUNNR.
ITAB1-KUNWE = ITAB-KUNWE.
ITAB1-VBELN = ITAB-VBELN.
ITAB1-POSNR = ITAB-POSNR.
IF ITAB-KURSK = 0.
ITAB-KURSK = 1.
ENDIF.
IF ITAB-KPEIN = 0.
ITAB-KPEIN = 1.
ENDIF.
get request dates from schedule line table
REFRESH ITAB2B.
SELECT EDATU VBELN POSNR WMENG
FROM VBEP INTO TABLE ITAB2B
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
WMENG <> 0.
get commit dates from schedule line table
REFRESH ITAB2C.
SELECT EDATU VBELN POSNR ROMS1
FROM VBEP INTO TABLE ITAB2C
WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
ROMS1 <> 0.
SORT ITAB2B BY EDATU.
SORT ITAB2C BY EDATU.
get PO number(s) for SO item and write to internal table
REFRESH ITAB4.
SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
FROM VBFA INTO TABLE ITAB4
WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
VBTYP_N = 'V' AND RFMNG <> 0.
calculate total delivery qty for PO item
DELV_QTY = 0.
LOOP AT ITAB4.
IF ITAB4-PLMIN = '-'.
ITAB4-RFMNG = ITAB4-RFMNG * -1.
ENDIF.
DELV_QTY = DELV_QTY + ITAB4-RFMNG.
ENDLOOP.
loop thru PO's for SO item
LOOP AT ITAB4.
select delivery lines for PO item
SELECT EINDT EBELN EBELP MENGE FROM EKET
INTO (EKET-EINDT, EKET-EBELN, EKET-EBELP, EKET-MENGE)
WHERE EBELN = ITAB4-VBELN AND EBELP = ITAB4-POSNN.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING EKET-MENGE REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING EKET-MENGE COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = EKET-EINDT.
ITAB1-ZDATE3 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = EKET-MENGE.
ITAB1-ZDESC = '3rd party item'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
APPEND ITAB1.
ENDSELECT.
ENDLOOP.
if total delivery qty < order qty, put remaining in non-confirmed
IF DELV_QTY < ITAB-KWMENG.
THIRD_QTY = ITAB-KWMENG - DELV_QTY.
PERFORM GET_REQUEST_DATE TABLES ITAB2B
USING THIRD_QTY REQ_DATE.
PERFORM GET_COMMIT_DATE TABLES ITAB2C
USING THIRD_QTY COM_DATE.
ITAB1-ZDATE1 = REQ_DATE.
ITAB1-ZDATE2 = '99991231'.
ITAB1-ZDATE2 = COM_DATE.
ITAB1-ZQTY1 = ITAB-KWMENG.
ITAB1-ZQTY2 = THIRD_QTY.
ITAB1-ZDESC = '3rd party item, no PO'.
calculate net value for backlog qty
ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
APPEND ITAB1.
CONTINUE.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM 900_CREATE_LIST
process open business detail and create list
FORM 900_CREATE_LIST.
if internal table is empty, write message and exit
DESCRIBE TABLE ITAB1 LINES ZCNTR.
IF ZCNTR = 0.
WRITE: / 'No Data Found for Selection'.
STOP.
ENDIF.
SORT ITAB1 BY KUNNR KUNWE VBELN POSNR.
loop thru sorted table and create list
LOOP AT ITAB1.
IF ITAB1-ZDATE1 = SPACE.
ITAB1-ZDATE1 = '99991231'.
ENDIF.
IF ITAB1-ZDATE3 = SPACE.
ITAB1-ZDATE3 = '99991231'.
ENDIF.
get SO item detail
CLEAR ITAB.
READ TABLE ITAB WITH KEY VBELN = ITAB1-VBELN
POSNR = ITAB1-POSNR BINARY SEARCH.
print sold-to and ship-to customer header info
AT NEW KUNWE.
CLEAR KNA1.
SELECT SINGLE NAME1 FROM KNA1 INTO KNA1-NAME1
WHERE KUNNR = ITAB1-KUNNR.
CONCATENATE ITAB-ORT01 ITAB-REGIO INTO ADRS1 SEPARATED BY ', '.
CONCATENATE ADRS1 ITAB-LAND1 INTO ADRS2 SEPARATED BY ' '.
CONCATENATE ITAB-NAME1 ADRS2 INTO ADRS3 SEPARATED BY ' '.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: /1 'Sold-to:', 10 ITAB1-KUNNR, 18 KNA1-NAME1,
56 'Ship-to:', 65 ITAB1-KUNWE, 73 ADRS3.
FORMAT RESET.
SKIP.
ENDAT.
print out backlog detail
CLEAR T171T.
SELECT SINGLE BZTXT FROM T171T INTO T171T-BZTXT
WHERE SPRAS = SY-LANGU AND BZIRK = ITAB-BZIRK.
WRITE: /1 ITAB1-VBELN,
13(6) ITAB1-POSNR NO-ZERO,
21 ITAB-MATNR,
41 ITAB-ARKTX,
83 ITAB1-ZDATE1,
95 ITAB1-ZDATE3,
107 ITAB1-ZDATE2,
119 ITAB-ERNAM,
129 ITAB-BZIRK, 135 T171T-BZTXT,
157(20) ITAB-BSTKD,
179(12) ITAB1-ZQTY1 DECIMALS 0,
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2,
225 ITAB1-ZDESC.
AT END OF VBELN.
SKIP.
ENDAT.
print footing at ship-to customer
AT END OF KUNWE.
SUM.
ULINE: /193(12), 207(16).
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: /1 'Total: Sold-to:', 18 ITAB1-KUNNR,
25 '/', 27 'Ship-to:', 36 ITAB1-KUNWE,
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2.
FORMAT RESET.
SKIP 2.
ENDAT.
AT LAST.
SUM.
ULINE: /193(12), 207(16).
FORMAT COLOR 1 INTENSIFIED ON.
WRITE: /1 'Report Total:',
193(12) ITAB1-ZQTY2 DECIMALS 0,
207(16) ITAB1-ZEXTD DECIMALS 2.
FORMAT RESET.
ENDAT.
ENDLOOP.
ENDFORM.
FORM GET_REQUEST_DATE
subroutine to get request date for SO item
FORM GET_REQUEST_DATE TABLES FTAB STRUCTURE ITAB2B
USING CONF_QTY REQ_DATE.
DATA: REMAIN LIKE VBEP-WMENG, "qty remaining
CNTR TYPE I, "loop counter
TAB_INDEX TYPE I. "table index
initialize
REMAIN = 0.
REQ_DATE = SPACE.
get first request date from table
TAB_INDEX = 1.
READ TABLE FTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
REQ_DATE = SPACE.
EXIT.
ELSE.
REQ_DATE = FTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = FTAB-WMENG - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
FTAB-WMENG = REMAIN.
MODIFY FTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
DELETE FTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
CNTR = 0.
WHILE REMAIN < 0 OR CNTR < 10.
DELETE FTAB INDEX TAB_INDEX.
TAB_INDEX = TAB_INDEX + 1.
READ TABLE FTAB INDEX TAB_INDEX.
REMAIN = REMAIN + FTAB-WMENG.
CNTR = CNTR + 1.
ENDWHILE.
IF REMAIN = 0.
DELETE FTAB INDEX TAB_INDEX.
ELSEIF REMAIN > 0.
FTAB-WMENG = REMAIN.
MODIFY FTAB INDEX TAB_INDEX.
ENDIF.
ENDIF.
ENDFORM.
FORM GET_COMMIT_DATE
subroutine to get commit date for SO item
FORM GET_COMMIT_DATE TABLES CTAB STRUCTURE ITAB2C
USING CONF_QTY COM_DATE.
DATA: REMAIN LIKE VBEP-WMENG, "qty remaining
CNTR TYPE I, "loop counter
TAB_INDEX TYPE I. "table index
initialize
REMAIN = 0.
COM_DATE = SPACE.
get first commit date from table
TAB_INDEX = 1.
READ TABLE CTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
COM_DATE = SPACE.
EXIT.
ELSE.
COM_DATE = CTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = CTAB-ROMS1 - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
CTAB-ROMS1 = REMAIN.
MODIFY CTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
DELETE CTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
CNTR = 0.
WHILE REMAIN < 0 OR CNTR < 10.
DELETE CTAB INDEX TAB_INDEX.
TAB_INDEX = TAB_INDEX + 1.
READ TABLE CTAB INDEX TAB_INDEX.
REMAIN = REMAIN + CTAB-ROMS1.
CNTR = CNTR + 1.
ENDWHILE.
IF REMAIN = 0.
DELETE CTAB INDEX TAB_INDEX.
ELSEIF REMAIN > 0.
CTAB-ROMS1 = REMAIN.
MODIFY CTAB INDEX TAB_INDEX.
ENDIF.
ENDIF.
ENDFORM.
END-OF-REPORT. -
Is there anyway to view the purchase order information foreach transaction
hi sap techies
Currently the FAGLB03 does not display the vendor related information for transactions coming through as a goods receipts (transactions processed by receiving dept) and/or related to purchase orders. Is there anyway to view the purchase order information for each transaction? For example, we cannot see vendor code/name, po #, etc.HEllo,
FAGLL03 displays information from the line items of the accounting documents. If the information you want to display exists in tables you can display. But if the information you want comes from other tables you cannot display.
As a workaround you can check the SAP note 1034354 which tells you how to add the offsetting accounting information and then you cna display some of the information you want. To do so you can create your own coding into a BADI implementation.
REgards,
REnan
Maybe you are looking for
-
Search Results in the Same Window..as we have in SDN
Hello Gurus, I want the search results to be displayed exactly like we have in SDN. I mean search result should be displayed in the same window rather than opening a new window. Also when click on a document that document should open in the same wind
-
Can I delete all exact duplicates in my library at one time? Do I have to delete each track individually?
-
Production version is not getting created using ALE-IDOC
Hi all, Am using BD10 to transfer the material from sending to receving system.All the views are geting sent successfuly accept the production version tab data of MRP4 view.The segment is available in the standard IDOC.But prodction TAB is not getti
-
Disk Utility doesn't show new drive when trying to install Snow Leopard
Please help because I've searched everywhere. My MacBook's hard drive failed. It's done for. I bought another internal, Western Digital 320gb WD3200BEVT. So it's brand new and when I boot from the Snow Leopard install I don't see the new hard drive i
-
This is a question regarding best practices. The ORDM tutorial from Oracle (http://st-curriculum.oracle.com/tutorial/ORDMTutorial/player.htm) states for the ORDM Derived Layer: "The Derived Data Model uses a low-level combination of base tables to pr