AMD Radeon HD 6970M with 2GB GDDR5 available for upgrade?

I bought my iMac in store and it came with AMD Radeon HD 6970M with 1GB. Then I saw that the 2GB version of this card is availble online only. I want the 2GB card bad. I see that apple sells video cards for older verions of the iMac. Does anyone know if there is a way to order the 2GB card for the mid-2011 i7 iMac?

Changing out the Radeon 6970M 1GB for a 2GB card will not void the warranty.  Changing the cpu will.
Really.
Have you read the warranty? Specifically, check (g) which appears to be applicable to a different graphics card (as well as (f)  and (d) which may also be applicable):
(This is an excerpt from an iMac hardware warranty for the US):
This warranty does not apply: (a) to consumable parts, such as batteries, unless failure has occurred due to a defect in materials or workmanship; (b) to cosmetic damage, including but not limited to scratches, dents and broken plastic on ports; (c) to damage caused by use with another product; (d) to damage caused by accident, abuse, misuse, liquid contact, fire, earthquake or other external cause; (e) to damage caused by operating the Apple Product outside Apple’s published guidelines; (f) to damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of Apple or an Apple Authorized Service Provider (“AASP”); (g) to an Apple Product that has been modified to alter functionality or capability without the written permission of Apple; (h) to defects caused by normal wear and tear or otherwise due to the normal aging of the Apple Product, or if any serial number has been removed or defaced from the Apple Product.
It is irrelevant whether or not I've done a teardown. What is important is that the OP now has the information necessary to make an informed decision. With that, I am done here.

Similar Messages

  • Aperture with iMac i7 3.4 AMD Radeon HD 6970M 2GB GDDR5

    I am looking to upgrade to the new iMac i7 3.4 (spring 2011).
    Currently I am running Aperture 3 via a MacBook Pro 2.66 (NVIDIA GeForce 9600M GT 512 Ram) along with 8GB DDR3 Ram.
    Just wondering if anyone has purchased the new 27" iMac i7 3.4 with AMD Radeon HD 6970M 2GB GDDR5 and 16GB DDR3 of Ram?
    If so do you see the performance of Aperture 3 running better?
    I know that Aperture runs better with more GPU, so I would assume the performance would be better?
    Thanks,
    Stu

    That box will rock Aperture if you order it with an SSD. IMO using hard drives for boot drives is obsolete.
    In my case Aperture (3.1.2) on the 2011 17" MBP (OS 10.6.7, 8 GB RAM, HD 6750M; a weaker box than the iMac you suggest) with Apple's SSD imports 3 GB of RAW+JPEG images in much less than a minute and has those images fully processed in about 5 minutes. IMO hella fast. And edits (with both the Aperture Library and referenced Masters on the SSD) are essentially instant.
    Only problems with the better Thunderbolt iMacs are:
    • Glossy-only display that not everyone can tolerate.
    • Hard drives are only upgradable by Apple, a sucky new trick in Apple's bag.
    But as far as Aperture performance goes all the top end Thunderbolt boxes will be spectacular. I cannot say enough good things about Aperture performance on SSD setups; IMO no Aperture user should buy a box without SSD.
    HTH
    -Allen

  • Issues with CS5 Liquify in my iMac with a AMD Radeon HD 6970M 2048 MB Graphics Card

    I have been trying to get to the bottom of this issue on my own, but to no avail.  I am running Photoshop CS5.1 Extended on an iMac with an i7, 16 GB of RAM and an AMD Radeon HD 6970M 2048 MB graphic card.  I am running OSX Lion.  Speed of the computer should NOT be an issue, but my liquify tool is impossibly slow.  I have seen others having this issue, but am not finding resolutions.  I have updated all of my software (Lion, CS5) and updated my drivers.  I have uninstalled Photoshop and reinstalled it, but still, no help.
    My Liquify tool is so slow that it is impossible to use.  It does not register if I release the mouse either and I often have to click a few times to release the brush.  I have Photoshop 5.1 on a PC and the Liquify runs very smoothly.
    Has this issue been addressed?  I am wondering if it has a root in how CS5 is reacting to the graphics card?  When I called Adobe, they swore it was Apple's fault.  When I talked to Apple, they were positive the blame lay with Adobe.  I just want a fix.  (Hey, I'll take a CS6 beta if that'll fix it.  )
    Thank you,
    Rachel

    Do you have any third party plugins installed?  If so, have you tried disabling them?  (one was showng to cause a slowdown, but I don't have my office notes handy at the moment to remember which one)
    Also, there was one obscure third party utiliity program (haxie) that also caused slowdowns in Liquify. (and again, my notes are at the office, so I don't recall the name)
    And you can try the usual: trash/reset Photoshop's preferences.
    Oh, and Lion still has a bunch of video driver bugs that Apple is continuing to work on.
    Sorry I don't have more definite info right now.

  • IMac 27" 2011 with Dead Graphic Card AMD Radeon HD 6970M

    Hello
    I'm from Thailand and my iMac 27" mid-2011 model is malfunctioning. I have windows 7 installed and I can use it only on safemode or when I disable the graphic card AMD Radeon HD 6970M. Updating the driver won't help at all.
    I talked to the local iservice and he says it will cost me $570 just to replace this card. I find it very expensive.
    Now I have learned that there is this replacement program http://support.apple.com/kb/TS5167 for the graphic card issue. I'd like to know if I am part of this. I'm not sure if I'm under any service coverage since it's been after many years of purchase.

    You should be covered - usually replacement programs last for 3 years from the latest date of consumer purchase (when apple discontinues the model). This is typical, but by no means concrete as I have nothing to do with Apple or its replacement policies. Your model also meets those specifications. Since the replacement program is stated as wordwide, it should also be applicable in your country.

  • AMD Radeon HD 6970M 2048 MB   CUDA

    Hello
    I have an iMac 3.4 GHz Intel Core i7/32GB RAM/ AMD Radeon HD 6970M 2048 MB running 10.8.3. After updating to 10.8.3 I went along updating other bits and bobs and the CUDA System Preferences, which I installed long ago, wanted to be updated.
    CUDA Driver Version : 5.0.45
    CPU Drive Version 8.10.44 304.10.65f03
    The CUDA system preferences also informs me that no newer CUDA Drivers are available. So it's up to date.
    My confusion is as follows, CUDA, as I understand it, unlike OpenCL which is open, is proprietary and for NVIDIA cards only or is it? Does my GPU work with this CUDA Driver? It must because I succefully installed it and generally the mac hesitates installing if something is not designed for whatever is inside the machine.
    Can someone please clarify because I can't find links or information to on CUDA being compatible with AMD Radeon HD 6970M.
    Sincerely
    PS I am posting this before I research on how to get BOINC to take advantage of my GPU where applicable.

    I just wanted to post a screen shot of the CUDA System Preferences for whomever needs to see it. This is what it looks like after updating it on March 16 2013.
    Also find the details on my GPU.
    Regards

  • Windows 7 can't recognize my AMD Radeon HD 6970M 1024 MB graphics card

    Hey community -
    I am having issues running Star Wars the Old Republic on my brand new iMac desktop with Windows 7 installed. I am getting an error message that is associated with the fact that WINDOWS 7 will NOT recognize my AMD Radeon HD 6970M 1024 MB graphics card. Under the displays/drivers it's showing up as standard VGA graphics, which won't cut it.
    I was recently having an issue missing drivers for my network card, which I fixed by going back through bootcamp and using a startup disk with all the drivers I needed.
    HOW do I get Windows 7 to pickup/detect my Radeon? Help!
    -Monty

    You can install the AMD HD RADION Mobile drivers which work from.
    If your Graphics card number ends in M
    http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx#2
    This also depends on if you installed 32bit windows or 64 bit. you will need the 32bit drivers if installed 32 bit windows.
    Download the full package under individual downloads.
    But before you install the amd drivers you may  need to install the boot camp drivers again, which include the motherboard drivers, sound, usb, etc etc etc.

  • Parallels desktop 7 running WI7 can't recognize my AMD Radeon HD 6970M?

    Hello, Apple Support!
    Thank you for beeing here, and I hope you can solve my problem explained below.
    I've got Parallels desktop 7 installed on my intel based iMac 27", where I have Windows 7 installed.
    Today I bought Hitman: Absolution and intstalled it without any problem on my Parallel desktop with Windows 7.
    When I tried to run it, a pop up came up with the infomation about direct X 10 missing and no graphic card detected.
    When I later on serach the internet for a solution I found that you could install the AMD Mobilty Drivers, but here with no success.
    Why can't Parallels Desktop 7 with Windows 7 installed recognize my AMD Radeon HD 6970M.
    Thank you in advance.
    /Ludwig Lindstrom
    Sweden

    LOL for starters you should not be posting this issue here but rather on the Parallels forum.
    And you may find that Parallels 7 is not DX10 compatible.
    Look here it works with version 8 apparently
    http://forum.parallels.com/showthread.php?p=656058#post656058

  • Is there an Update Driver for my Graphics card, AMD Radeon HD 6970M 2048 MB , in a 27inch mid 2011 iMac?  thank you!

    Is there an Update Driver for my Graphics card, AMD Radeon HD 6970M 2048 MB , in a 27inch mid 2011 iMac?  thank you!

    THank you very much, I I have a ton of Adobe programs on my mac and i think a Cuda driver update was installed with it, it just popped up the other day in my system settings and is asking to upgrade my graphics card, but i don't have the same card as this update... so i thought i would double check! thank you again.

  • Radeon HD 4870 X2 2GB GDDR5 on a 785GTM-E45 mainboard post prob

    trying to install my Radeon HD 4870 X2 2GB GDDR5 on my 785GTM-E45 mainboard and it wont post i disabled my internal card did every thing directions said to do. cleared my cmos still wont post. so i removed my pci e card and hooked my monitor back up to the main board and nwow that isnt posting grrrrr is there a jumper setting on my board that im not seeing to make my new card work. or how can i get my onboard vga to work agian

    ok i got it to work and after about a minute running though my 650w power supply went BOOM so i went out and got a TX850 V2 power supply and it fired right up now im having a problem with hyper threading i see theres a way to adjust it in my bios just need to figure out what to adjust it to

  • Hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m my problem is imac works fine in safe mode,but when you try to startup normal it's connstantly restart by it self.

    hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m
    my problem is
    imac works fine in safe mode,
    but when you try to startup normal it's connstantly restart by it self.

    in safe mode works perfectly,soon as I try to boot in normal mode it's keep restarting.on screen I don't  see any line vertical or horizontal picture look normal on safe mode.but unable to start normal it just restarting over and over.I try another HDD but same things happen,I replace memory but still same.works ok in safe mode but not in normal mode.I will try to post system error report.

  • Will amd radeon 6850 work with adobe cloud

    will amd radeon 6850 work with adobe cloud?

    Hi Sanbidai,
    I haven't heard of any specific incompatibilities with that card. I'd recommend installing the latest video driver from the manufacturer and testing whatever products you intend to use as a trial before you join, just to be positive.
    -Dave

  • Imac 27" - Video card AMD Radeon HD 6970M 2028 MB

    Dear All,
    I want to buy the Video card AMD Radeon HD 6970M 2028 MB for the 27" imac Mid 2011. Any suggest from where i can replace it or buy it online? any help from Apple store for replacement / alternative?
    regards,
    Wassim,

    iMac (27-inch): AMD Radeon 6970M Video Card Replacement Program

  • AMD Radeon HD 6630M vs Intel HD 3000 for driving a Thunderbolt Display

    Hi
    I've searched the net and cant find the specific answers I'm looking for regarding this issue.
    Which graphics option is better for the Mac mini when connected to an Apple Thunderbolt display running at 2560 x 1440 resolution:
    1) AMD Radeon HD 6630M with its 256mb GDDR5 memory
    or
    2) Intel HD 3000 with 512mb of memory ( i.e. I will upgrade the Mac mini to 8gb or RAM to get 512mb of video memory).
    Now will the HD 3000 with its 512mb of system memory be better simply because it has more, or will the AMD 6630M be better because even though it has less memory it has faster GDDR5 memory as opposed to the DDR3 memory the Intel GPU will use?
    I tested out the AMD 6630M in an Apple store and when I had multiple Safari windows open it struggled a bit when I used expose. It stuttered and lagged and the animation was not smooth. Would the Intel 3000 with 512mb ease this problem?
    Thanks

    Dear KYL, thanks for you fast and honest response. I have to say I am really disappointed. Apple sell so few machines/hrdware choice, you would have thought that the ones they do sell could run the core function of the OS smoothly!
    I am really surprised that the Intel chip outperforms the 6630 for 2D? So the 6630 must only be better for 3D?
    Is there anywhere that list 2D and 3D performance of different graphics cards to get some idea?
    I may try adding the 8 RAM this week and see if it helpls at all. If it does, I wonder if there is a way to force the HD3000 to use even more RAM? i.e my modifying some of the preference or extension files somewhere.
    If it doesn't I'm not sure what I will do. all this is logged with Applecare, but the machine was bought by my University, so returning it will be terribly inconvenient - if it is at all possible.
    Buying a 15" MBPro is a very expensive way to achieve smooth Expose! I also will have unnecessarily ordered a superdrive external, and would then need to spec the MBPro with a SSD. And get an external HD too.
    I love the mini, and the speed of the i7 + SSD is incredible, but jerky OS on something one uses 8 hours a day is just not acceptable.
    The purchase is already inconvenient as I have to virtualise SL server to run some old academic software that needs Rosetta (but at leat that works).
    Ho hum...
    Expose has been around for 8 years or so. I'm amazed modern hardware can't work it smoothly (even on a big display)

  • Im need new drivers for AMD RADEON HD 6970M. Windows 7 64 bit.

    Hello.
    I have Imac 27 Jule2011 with AMD Radeon HD6970M.
    Im using Windows 7 64 bit.
    But new games require newest version of driver for videocard.
    I tried install ATI CATALYST and install new video drivers, but it is impossible, cuz i have apple architecture of hardware.
    Last version of bootcamp(5.0.33) have old version of driver (12.8).
    I have to install 13.9 or later.
    Please, help me!

    Visit the Boot Camp forum, that is where the Boot Camp and MS Windows gurus will be, this forum is just for general iMac use where most people only use OS X.
    Good luck.

  • AMD Radeon 6770m and Intel HD 3000 Driver for Windows 8.1 Pro 64 Bit

    Hi, I use
    Laptop : HP Pavilion DV 6 - 6019 TX.
    OS : Windows 8.1 Pro 64 Bit.
    VGA : - AMD Radeon 6770m
               - Intel HD 3000
    Now, the graphic was error,  each after booting, the windows logo appears then to black screen (can't get the desktop).
    In device manager - display adapters, only AMD problem (Microsoft Basic Display Adapter), then I uninstall the driver to be able to install AMD drivers.
    I tried with "14-4-mobility-win7-Win8-win8.1-64-dd-ccc-WHQL", it is said that the last AMD drivers, but when at the end of install, it said failed to complete. 
    i also update driver Intel HD 3000 from this " https://downloadcenter.intel.com/Detail_Desc.aspx?​DwnldID=23764 "
    File name: win64_152822.exe
    Version: 15.28.22.64.3517 (Latest)
    Date: 04/10/2014
    Size: 138.68 MB
    OS: Windows 7 (64-bit), Win 8 (64-bit), Win 8.1 (64-bit)
    anyone please help me? i already try 5 days to try some driver but still black screen because AMD driver can't install. if you know the driver, please write the link. thanks a lot

    1. In bios, do you found fixed and dynamic? if you don't found, install bios mod. Use dynamic
    2. Uninstall all programs and drivers previously, before of "Advanced Micro Devices, Inc. - Graphic Adapter WDDM1.3 - AMD Radeon HD 6700M Series" Release July 2014. You can use http://www.wagnardmobile.com/DDU, for example. 
    3. Do you install windows 8.1 on windows 8.0? do you use windows 8.1 fresh installation? Can you testing install a new copy of windows 8.0 fresh? install drivers and later install updates... or fresh install windows 8.1?
    4. You testing install Windows 7 with http://ftp.hp.com/pub/softpaq/sp55001-55500/sp5509​2.exe and update to windows 8?
    5. You testing install http://ftp.hp.com/pub/softpaq/sp55001-55500/sp5509​2.exe in windows 8 initially?
    NOTE: Excuse me my bad english, I try to help you. You should install drivers in order: Intel Chipset Device Software, Intel Rapid Storage Technology, Intel Management Engine Interface (6-series / 7-series / 8-series / 9-series) and then AMD software: http://forum.notebookreview.com/hp-drivers-softwar​e-forum/556469-drivers-hp-dv6-4xxx-dv6-6xxx-dv7-5x​...
    NOTE 2: My computer support Windows 8.1 native, but your computer not... http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5077​... will be no new official drivers for these devices
    NOTE 3. Test leshcat or guru3d drivers, and review forum respectively

Maybe you are looking for

  • Is it possible to use an external HD to startup a MacBookAir (late 2011)?

    My external HDs include 1) OWC Mercury Elite Pro 3tB (Firewire 800) with Yosemite startup partition 2) MacBook Pro 2012 with ThunderBolt (OK for Target Disk startup using Thunderbolt cable)

  • Query regarding grouping of 11i baseline patches

    Hello, Application : 11.5.10.2 DB : 10.2.0.4 OS : AIX 6.1 We are thinking of applying the 11i baseline patches in two groups/phases as mentioned below. We have in total 33 baseline patches (plus pre and post reqs too) to apply. Keeping in mind the fu

  • RuntimeException in RequestMessageMapping .but works fine in message mappin

    Hi , I m doing a JMS-RFC scenario. (wiht Content Conversion) I m getting a Message mapping Runtime Exception in SXI_MONI. (Java Null Pointer Exception) But when i copy the same payload and tested in Message mapping, it works fine. When i tried  the s

  • Essbase server is not starting...

    Hi, I'm not able to login to Essbase server. Its already started in windows service. Initially it used to blink and disappears. I have changed the ARBORPATH environment variable to c:\hyperion\analyticservices. Now when I type essbase in command prom

  • BADI or Userexit For QM01(Quality Notification)

    Dear Experts, I want to add some extra fields in QM01 . Is there is any BADI or userexit available for QM01(Quality Notification). Please give me some solution. Regards, Sanket.