An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances. 
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorOpeningConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in  configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error:  "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server.  The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1.  Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running.  It should be version 11.0.3000 or greater.  If it's not, you have the wrong "SP1" installed.  The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed.  You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases.  Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

Similar Messages

  • Save Query - An error occurred while creating connection strings for the query

    A workbook trying to edit and reload I get the following error "Save Query - An error occurred while creating connection strings for the query" No Power Pivot data model or anything.

    I am getting the same error when editing a Power Query in an Excel spreadsheet. It happens when I change a Group By step to do a Sum instead of Count Rows.

  • Please help me resolve the Lync server 2013 deployment error: "An error occurred while applying SQL script for the feature BackendStore."

    I am getting an error in "Step 2 - Setup or Remove Lync Server Components" of "Install or Update Lync Server System" step.
    "An error occured while applying SQL script for the feature BackendStore. For details, see the log file...."
    Additionally, all previous steps such as: Prepare Active Directory, Prepare first Standard Edition server, Install Administrative Tools, Create and publish topology are done without any errors. The user that I used to setup the Lync server is member of:
    Administrators
    CSAdministrator
    Domain Admins
    Domain Users
    Enterprise Admins
    Group Policy Creator Owners
    RTCComponentUniversalServices
    RTCHSUniversalServices
    RTCUniversalConfigReplicator
    RTCUniversalServerAdmins
    Schema Admins
    I have tried to re-install all the things and started to setup a new one many times but the same error still occurred. Please see the log below and give me any ideas/solutions to tackle this problem.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Initializing DbSetupBase
    Parsing parameters...
    Found Parameter: SqlServer Value lync.lctbu.com\rtc.
    Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
    Found Parameter: Publisheracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LCTBU\RTCUniversalServerAdmins.
    Found Parameter: Replicatoracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
    Found Parameter: Consumeracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LCTBU\RTCUniversalReadOnlyAdmins.
    Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
    Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
    Found Parameter: Role Value master.
    Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 2100.
    Sql version is acceptable.
    Validating parameters...
    DbName rtcxds validated.
    SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
    DbFileBase rtcxds validated.
    DbPath D:\CsData\BackendStore\rtc\DbPath validated.
    Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
    LogPath D:\CsData\BackendStore\rtc\LogPath validated.
    Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    Checking state for database rtcxds.
    Checking state for database rtcxds.
    State of database rtcxds is detached.
    Attaching database rtcxds from Data Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath, Log Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    The operation failed because of missing file '\\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath\rtcxds.mdf'
    Attaching database failed because one of the files not found. The database will be created.
    State of database rtcxds is DbState_DoesNotExist.
    Creating database rtcxds from scratch. Data File Path = D:\CsData\BackendStore\rtc\DbPath, Log File Path= D:\CsData\BackendStore\rtc\LogPath.
    Clean installing database rtcxds.
    Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
    Initializing DbSetupBase
    Parsing parameters...
    Found Parameter: SqlServer Value lync.lctbu.com\rtc.
    Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
    Found Parameter: Serveracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
    Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
    Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
    Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 2100.
    Sql version is acceptable.
    Validating parameters...
    DbName rtcshared validated.
    SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
    DbFileBase rtcshared validated.
    DbPath D:\CsData\BackendStore\rtc\DbPath validated.
    Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
    LogPath D:\CsData\BackendStore\rtc\LogPath validated.
    Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    Checking state for database rtcshared.
    Reading database version for database rtcshared.
    Database version for database rtcshared - Schema Version5, Sproc Version 0, Update Version 1.
    Thanks and Regards,
    Thanh Le

    Thanks Lạc
    Phạm 2
    I Had similar issue i end up uninstalling and reinstallting but same issue, then i change the drive but same issue. It was I/O issue. After adjusting my I/O it fix our issue and installation went on without any issue. 
    If any one using KVM here is detail article 
    We just  give this option cache=‘writeback
    using this article http://www.ducea.com/2011/07/06/howto-improve-io-performance-for-kvm-guests/ and http://itscblog.tamu.edu/improve-disk-io-performance-in-kvm/ this fix my issue thanks 

  • An error occurred while applying SQL script for the feature BackendStore.

    Hello,
    I am using my AD in Windows Azure VMs. I created new VM of A3 (4 cores, 7 GB Memory) Windows Server 2012 R2, Port 1433 MSSQL added, made it a member of Domain and planned to install first Lync Server 2013 on it.
    In "Setup or Remove Lync Server Components" of "Install or Update Lync Server System", got an Red Coloured text "An error
    occurred while applying SQL script for the feature BackendStore."
    I have not enabled monitoring and archiving server in topology builder. I added "Network Service" and assign "Full Control" in Security Permissions of "C:\CsData" and "C:\LyncShare".
    I executed the SQL Setup Wizard and upgraded any instance to 2012.
    Please guide.
    Thanks, Divyaprakash Koli

    Please check you have enough disk space for the disk where the folders are.
    Check view log for detailed log information.
    The following link is a similar thread for you to refer:
    http://social.technet.microsoft.com/Forums/lync/en-US/a3cb9ab0-7451-4df5-af96-3d2784d1b075/an-error-occurred-while-applying-sql-script-for-the-feature-backendstore-for-details-see-the-log?forum=lyncdeploy
    Lisa Zheng
    TechNet Community Support

  • An error occurred while applying SQL script for the feature BackendStore. For details, see the log file

    Hello
    i got this error in step2
    Error: An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][09_05_16].log'
    here is full summary
    > Bootstrap-CsComputer
    Logging status to: C:\Users\administrator.RCC\AppData\Local\Temp\2\BootstrapFull-[2013_09_23][12_17_37].html
    Checking prerequisites for bootstrapper...
    Checking prerequisite WMIEnabled...prerequisite satisfied.
    Checking prerequisite NoBootstrapperOnBranchOfficeAppliance...prerequisite satisfied.
    Checking prerequisite SupportedOS...prerequisite satisfied.
    Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
    Host name: lync.rcc.local
    Disabling unused roles...
    Executing PowerShell command: Disable-CSComputer -Confirm:$false -Verbose -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Disable-CSComputer-[2013_09_23][12_17_46].html"
    Checking prerequisites for roles...
    Checking prerequisite SupportedOS...prerequisite satisfied.
    Checking prerequisite SupportedOSNoDC...prerequisite satisfied.
    Checking prerequisite SupportedSqlRtcLocal...prerequisite satisfied.
    Checking prerequisite WMIEnabled...prerequisite satisfied.
    Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
    Checking prerequisite PowerShell...prerequisite satisfied.
    Checking prerequisite WindowsIdentityFoundation...prerequisite satisfied.
    Checking prerequisite SupportedServerOS...prerequisite satisfied.
    Checking prerequisite NoUnsupportedWinFab...prerequisite satisfied.
    Checking prerequisite SupportedSqlLyncLocal...prerequisite satisfied.
    Checking prerequisite SupportedSqlRtc...prerequisite satisfied.
    Checking prerequisite IIS...prerequisite satisfied.
    Checking prerequisite IIS7Features...prerequisite satisfied.
    Checking prerequisite ASPNet...prerequisite satisfied.
    Checking prerequisite KB2646886Installed...prerequisite satisfied.
    Checking prerequisite BranchCacheBlock...prerequisite satisfied.
    Checking prerequisite WCF...prerequisite satisfied.
    Checking prerequisite WindowsMediaFoundation...prerequisite satisfied.
    Checking prerequisite SqlInstanceRtcLocal...prerequisite satisfied.
    Checking prerequisite VCredist...prerequisite satisfied.
    Checking prerequisite SqlNativeClient...prerequisite satisfied.
    Checking prerequisite SqlClrTypes...prerequisite satisfied.
    Checking prerequisite SqlSharedManagementObjects...prerequisite satisfied.
    Checking prerequisite UcmaRedist...prerequisite satisfied.
    Checking prerequisite WinFab...prerequisite satisfied.
    Checking prerequisite MicrosoftIdentityExtensions...prerequisite satisfied.
    Checking prerequisite SqlInstanceLyncLocal...prerequisite satisfied.
    Checking prerequisite SqlInstanceRtc...prerequisite satisfied.
    Checking prerequisite RewriteModule...prerequisite satisfied.
    Checking prerequisite SpeechPlatformRuntime...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ca-ES_Herena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_da-DK_Helle...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_de-DE_Hedda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-AU_Hayley...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-CA_Heather...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-GB_Hazel...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-IN_Heera...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_en-US_Helen...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_es-ES_Helena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_es-MX_Hilda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fi-FI_Heidi...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fr-CA_Harmonie...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_fr-FR_Hortense...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_it-IT_Lucia...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ja-JP_Haruka...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ko-KR_Heami...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_nb-NO_Hulda...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_nl-NL_Hanna...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pl-PL_Paulina...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pt-BR_Heloisa...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_pt-PT_Helia...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_ru-RU_Elena...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_sv-SE_Hedvig...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-CN_HuiHui...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-HK_HunYee...prerequisite satisfied.
    Checking prerequisite MSSpeech_TTS_zh-TW_HanHan...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ca-ES_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_da-DK_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_de-DE_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-AU_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-CA_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-GB_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-IN_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_en-US_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_es-ES_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_es-MX_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fi-FI_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fr-CA_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_fr-FR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_it-IT_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ja-JP_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ko-KR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_nb-NO_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_nl-NL_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pl-PL_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pt-BR_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_pt-PT_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_ru-RU_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_sv-SE_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-CN_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-HK_TELE...prerequisite satisfied.
    Checking prerequisite MSSpeech_SR_zh-TW_TELE...prerequisite satisfied.
    Checking prerequisite UcmaWorkflowRuntime...prerequisite satisfied.
    Installing any collocated databases...
    Executing PowerShell command: Install-CSDatabase -Confirm:$false -Verbose -LocalDatabases -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Install-CSDatabase-[2013_09_23][12_17_52].html"
    An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][12_17_54].log'
    what should i do?
    Please help me

    Hi,
    The issue may be related to disk read and write cache. Here is a similar case for your reference:
    http://blog.kloud.com.au/2013/07/15/publish-lync-2013-with-2012-r2-preview-web-application-proxy/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Kent Huang
    TechNet Community Support

  • Error occured while creating site collection for the first time in SP2013

    While creating a new site collection in SharePoint 2013, I need to do atleast 4 times " Go back to Site" begore it appears properly. Could you please let me know why this error is occuering while we create site collection for the first time.
    Is it aknown issue or due to RAM contraints.I am using 16 GB of RAM in Web tier.

    You can get by with 16 GB of RAM so I am guessing that is not the cause.  Although, you could verify your memory utilization during the process.  As long as you don't exceed 95% you should be fine.  Next time, I would instead look up the
    error in the ULS logs using the correlation id and see if you can get more details of what is causing the error.
    Corey Roth - SharePoint Server MVP blog:
    www.dotnetmafia.com twitter: @coreyroth |
    SP2 Apps

  • Power Manager Gauge: Error Occurred While Loading Resource Dll

    Just installed windows 10. An dialog window pops up immediately after logon, saying: Power Manager Gauge: "Error occurred while loading resource dll". The power manager driver was up-to-date using System Update and Windows Update. The windows seems working fine after close the dialog. Event log:Faulting application name: rundll32.exe_PWMTR64V.dll, version: 10.0.10240.16384, time stamp: 0x559f39d6Faulting module name: IMM32.dll_unloaded, version: 10.0.10240.16384, time stamp: 0x559f3b64Exception code: 0xc000041dFault offset: 0x0000000000004c70Faulting process id: 0x17bcFaulting application start time: 0x01d0cc1e64ae9c62Faulting application path: C:\WINDOWS\system32\rundll32.exeFaulting module path: IMM32.dllReport Id: dc5d2634-1815-4621-9b48-fdd9d21c8ba8Faulting package full name:Faulting package-relative application ID: 

    Solved. The error comes from the scheduled task by Lenovo Settings Power. By disabling the the task in the Task Scheduler, the error went away. This does not affect the function of Lenovo Settings, just make the power information a bit slow to load.

  • Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

    I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
    I also configured excel services correctly. Everything works fine but the powerview doesn't work!
    While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
    to access the data source."
    error detail: 
    <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
    error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0</HelpLink><ProductName
    xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
    xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
    xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
    data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorOpeningConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
    to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
    Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
    I Appreciate in advance.

    Hi Ali.y,
    Based on the current error message, the error can be related to the
    Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
         1. The C2WTS Windows service and C2WTS SharePoint service are both running.
         2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
         3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A).  When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
    A trusts Domain B.
    In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
    Services server.
    To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
    • Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
    Note: Fully_Qualified_domainName is a placeholder for the FQDN.
    • Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
    For more information, please see:
    How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • I have no problem connecting my i-phone programs to my tv through apple tv. but one program from an application from appstore don't go through apple tv. It says an error occured while loading the content.This is just for one program. All other works good.

    My apple TV works fine with my I-Phone 4s. But one program from one of the application I downloaded from the app store dont work. When I load that a message comes "an error occured while loading this program" This is  only for one program all other most of the time works good. Any one knows why ?

    Hi there Mundaplackel!
    I have an article here for you that can help you troubleshoot the functionality of that app that you have purchased from the app store, and should be able to give you some steps that will help you resolve the issue:
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/TS1702
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • INS-08106: Unexpected error occurred while loading the 'InventoryUI'

    Hello.
    Have done alot of installs over time, but this error has me stymied. Here are the givens:
    2-node Linux RHEL 5 OS
    Will ASM over fiber (using ASMLib)
    Attempting to install Oracle 11gR2 (11.2.0.3.0)
    SSH is working and runcluvfy gives no errors on wither nodes.
    When running through the installer, I am on the "specify Installation Location" menu.
    I input Oracle Base: /apps/oracle
    I input Software Location: /apps/grid/product/11.2.0/grid_1
    I hit NEXT and afeter a short time, I get the following error:
    INS-08106: Unexpected error occurred while loading the view 'InventoryUI' associated to state 'inventory.'
    No further details are given.
    I look in the install log for this run and see these last final lines (no errors appear in this log prior):
    INFO: Gathering system details
    INFO: Checking specified location on remote nodes... (btw - specified path DO exist w/correct perms/ownership)
    INFO: size stimation for Completeinstall is 5632.0
    INFO: Completed validating state <CRSInstallLocationUI>
    INFO: Verifying route INVENTORY_ABSENT
    INFO: Get view names [InventoryUI]
    INFO: View for [InventoryUI] is oracle.install.ivw.common.view.InventroyUI@58046530
    INFO: Initializing view [InventoryUI> at state <inventory>
    INFO: Fetching existing UNIX groups
    INFO: Terminating all background processes
    INFO: Terminated all background procecces
    SEVERE: [FATAL] [INS-08016] Unexpected error occurred while loading the view 'InventoryUI' associated to state 'inventory.'
    CAUSE: No additional information available.
    ACTION: Contact Oracle Support Services or refer to the software manual..
    Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:1032
    INFO: Advice is ABORT
    INFO: Adding ExitStatus FAILURE to the exist status set
    INFO: Finding the most appropriate exist status for the current application
    INFO: Exit Status is -1
    INFO: Shutdown Oracle Grid Infrastructure
    INFO: Unloading Setup Driver
    I realize I can open an SR in MOS, but was hping that maybe someone in this forum had encountered this error previosly and might have some sugestions or a solution that worked for them. The only same error code in MOS relates to to:
    Unexptected error occurred while loading the view 'GridPlugPlayInfoUI' associated to state 'GridPlugPlayInfoUI', but this has a fix in /etc/hosts, but is NOT the same error I am getting.
    Thank you in advance for any help.
    Matt

    /etc/hosts file was ok as-is.
    Here was the underlying problem that has now been fixed:
    We had three user goups associated with user Oracle. They were oinstall, dba, and oper
    In /etc/groups, "oper" was not present. During the install, but prior to the actual pressing of the "Install" button, check(s) are made between the groups tied to the installer user and what groups are associated with the same user in /etc/groups. Once "oper" was added to the /etc/groups file, the error disappeared and the install proceeded.
    Problem solved. Thanks for any earlier inputs.
    Matt

  • D4O-1009 An error occurred while loading the worksheet

    hye everbody
    i create a worksheet in discoverer plus olap but i get the error *"D4O-1009 An error occurred while loading the worksheet"..*
    even i uninstall the catalog and install the catalog..
    when i create the worksheet and saved..of i exit..and try to open back...it show this error..
    this is the diagnosis for the connection...
    <D4OCheckConfig version="1.0.0.0">
    <Check key="JDK version" value="1.6.0_16"/>
    <Check key="BI Beans internal version" value="3.2.2.0.24"/>
    <Check key="Discoverer Plus OLAP version" value="10.1.2.07.75"/>
    <Check key="Discoverer version" value="10.1.2.48.18"/>
    <Check key="port" value="-1"/>
    <Check key="Connect to database" value="Successful"/>
    <Check key="JDBC driver version" value="10.1.0.3.0"/>
    <Check key="JDBC JAR file location" value="\TOSHIBA\disco\plus_files\d4o_double.jarjar"/>
    <Check key="Database version" value="10.2.0.1.0"/>
    <Check key="OLAP API Server version" value="10.2.0.1.0"/>
    <Check key="OLAP AW Engine version" value="10.2.0.1.0"/>
    <Check key="OLAP Catalog version" value="10.2.0.1.0"/>
    <Check key="BI Beans Catalog version" value="3.2.2.0.24"/>
    <Check key="Discoverer Catalog version" value="10.1.2.07.75"/>
    <Check key="Authorized for Discoverer Plus OLAP catalog" value="Yes"/>
    <Check key="OLAP API JAR file version" value="9.2"/>
    <Check key="OLAP API JAR file location" value="\TOSHIBA\disco\plus_files\d4o_double.jarjar"/>
    <Check key="Load OLAP API metadata" value="Successful"/>
    <Check key="Number of metadata folders" value="3"/>
    <Check key="Number of metadata measures" value="19"/>
    <Check key="Number of metadata dimensions" value="17"/>
    this is the error when i save the error in a notepad...
    oracle.dss.d4o.common.D4ORuntimeException: D4O-1009 An error occurred while loading the worksheet.
    oracle.dss.bicontext.BINamingException: BIB-14099 Unknown naming exception.
    oracle.dss.bicontext.BINamingException: BIB-14067 Persistable object threw exception during lookup on method setXMLAsString; component class oracle.dss.dataSource.QueryServer; exception null.
    i not have any clue...why this thing occur..
    any idea why this thing occur...
    thanks in advance....
    regards,
    rao..

    Hi Rao
    Please don't keep creating new postings for the same issue as it is hard to keep answering multiple posts about the same thing.
    If you have done all of the things suggested by Keith in my previous reply, which as I say is what I would have done, then you really ought to raise this as a service request to Oracle.
    I'm advising this because the particular error you are encountering does not come up in my database of fixes neither could I find any reference to it in either the OTN or MetaLink forums. This needs to be brought to Oracle's attention.
    Best wishes
    Michael

  • ''A communication error occurred while loading the view pane"

    Hi All,
    when we are trying to open native Directory users,we are getting below error
    ''A communication error occurred while loading the view pane.''
    Could You please help us,
    Thanks,
    Ash

    HI,
    What is the version that you are currently on?
    11.1.2.2
    Is the database up and running and that there are no issues in connectivity?
    db2 working fine
    Was it ever working without any issues before?
    no
    Are you trying to access native directory just after you start the services or you wait for some time and then give it a try?
    yes we tryed like that also
    Did you try to restart the services and check if it works after the service reboot?
    yes we restarted all services,also db2
    Still we are getting same error
    Could You please help us,
    thanks
    Ash

  • TF215097: An error occurred while initializing a build for build definition : Could not establish trust relationship for the SSL/TLS secure channel

    Hello,
    We are facing an issue when triggering a new build using TFS 2013 Update 4, VS2013 Update 4 using TFVCTemplate.12.XAML template. All our other older build definitions just work fine but not the TFVCTemplate.12.XAML.  It seems to me that some certificate
    might be invalidated. Can anyone please point me in the right direction? 
    Thanks, 
    Mitul
    TF215097: An error occurred while initializing a build for build definition :
    Exception Message: One or more errors occurred. (type AggregateException)
    Exception Stack Trace: at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
    at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFile(TfsTeamProjectCollection projectCollection, String itemPath, Stream outputStream)
    at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFileAsString(TfsTeamProjectCollection projectCollection, String itemPath)
    at Microsoft.TeamFoundation.Build.Client.ProcessTemplate.Download(String sourceGetVersion)
    at Microsoft.TeamFoundation.Build.Hosting.BuildControllerWorkflowManager.PrepareRequestForBuild(WorkflowManagerActivity activity, IBuildDetail build, WorkflowRequest request, IDictionary`2 dataContext)
    at Microsoft.TeamFoundation.Build.Hosting.BuildWorkflowManager.TryStartWorkflow(WorkflowRequest request, WorkflowManagerActivity activity, BuildWorkflowInstance& workflowInstance, Exception& error, Boolean& syncLockTaken)
    Inner Exception Details:
    Exception Message: An error occurred while sending the request. (type HttpRequestException)
    Exception Stack Trace: at Microsoft.VisualStudio.Services.WebApi.VssHttpRetryMessageHandler.<SendAsync>d__1.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
    at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
    at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
    at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
    at Microsoft.VisualStudio.Services.WebApi.HttpClientExtensions.<DownloadFileFromTfsAsync>d__2.MoveNext()
    Inner Exception Details:
    Exception Message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
    at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
    Inner Exception Details:
    Exception Message: The remote certificate is invalid according to the validation procedure. (type AuthenticationException)
    Exception Stack Trace: at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)
    at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)

    Hi Mitul,
    Thanks for your reply.
    It’s strange, if your old build definitions can work using the same TFS Build Server, that indicate your TFS Server configuration is correct and can works. But only new build definition with default TfvcTemplate.12.xaml template cannot build successful.
    Please share your TFS Server detailed environment information here. And share your
    Build Service Properties dialog screenshot here.
    Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
    Clean the Cache folder on Server machine. The folder path is:
    C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.  
    After cleaned, on Server machine, click Start and select
    Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
    Additionally, you can run the TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • When starting the Migration Assistant on my pc, after a few seconds it says "An error occurred while preparating your information for transfer" what should i do ?

    When starting the Migration Assistant on my pc, after a few seconds it says "An error occurred while preparating your information for transfer" what should i do ?

    Restart both computers then try again.
    Switch Basics: Migrate your Windows files to your Mac

  • WPC Error- Cannot render container : An error occurred while loading the do

    Dear All
    we are on SP13 / EP 7 ..we have created sites using WPC and when we try to trasnport with GUIDSs we got to know that SP13 does not suport GUIDs ..so i have deplyoed SP14 WPC abd the interfase looks differnt and it gives erros ..again i undeployed the SP14 WPC and deployed the SP13 WPC , after that interfase looks ok but we are getting an error in when we try to edit pages through WPC..
    following messgae appera when we open up a page to edit in WPC
    Cannot render container : An error occurred while loading the document from the resource content
    we found this exception in error log in Server..
    couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
    #1.5 #00145ECC9C6700780000002500000B80000463656B4E6BC6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(142)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###Couldn't read content with ID -1. Select again...#
    #1.5 #00145ECC9C6700780000002600000B80000463656B4E78E6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###couldn't retrieve contents with id -1#
    #1.5 #00145ECC9C6700780000002700000B80000463656B4E812B#1235187149283#com.sapportals.wcm.WcmException#sap.com/irj#com.sapportals.wcm.WcmException.WcmException(62)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Error##Plain###couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
         at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.getInternalStream(DBContentInputStream.java:345)
         at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.<init>(DBContentInputStream.java:50)
         at com.sapportals.wcm.repository.manager.cm.persistence.BasicPersistenceDB.selectDocumentContent(BasicPersistenceDB.java:1632)
         at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:143)
         at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:95)
         at com.sapportals.wcm.repository.ContentImpl$ContentWithPrefetchedInputStream.<init>(ContentImpl.java:402)
    Please tell us how to fix this error
    regards
    Buddhike

    Need to upgarde to SP14

Maybe you are looking for

  • Warning [deprecation] setStatus(int,javax.lang.String)

    warning [deprecation] setStatus(int,javax.lang.String) in HttpServletResponseWrapper can I find a jee.jar to remplace j2ee.jar to take the resolution of this problem

  • ITunes 8 visualizer

    Besides all the discontent around iTunes 8's failure to 'connect' to remote speakers, here's another curiosity. This update now includes the 'visualizer' icon back on the main screen, placed second from the lower right corner. It looks like a 'flower

  • Getting apps from my iPod to my PC

    I bought an iPod touch. Then I bought apps. Now, I want to update my OS, but can't because all of my apps will go away. How do I put the apps on my iTunes? or If I re-download the apps, will the app store recognize that I already purchased these apps

  • Lockbox File Format in Europe

    Hi, We are in planning to implement Lockbox functionality for auto cash application in our European company codes. I have few questions: 1)What file formats can SAP read other than BAI2  format.We are using standard SAP program  RFEBLB00 (Transaction

  • Help in Bapi_document_change

    I am using Bapi_document_change.Its not changing the document fields.How to proceed?