An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified

Hello All
I have TMG server installed on windows 2008 R2 64x with 3 network adaptor (Lan,Premiter and External), but for some reason the clients on premiter Network cant get ip addresses from dhcp which located on LAN. i have done
ipconfig /release
ipconfig /flushdns
ipconfig /renew
but no success...... also uninstalled premiter network adaptor and reinstall network adaptor still no success.....getting this error.
An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified
by the way My Lab is based on Hyper-v
any help would be much greatfull
thanks

Hi,
Have you checked the TMG logging?
You could try the troubleshooting steps in the thread below.
http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/an-error-occurred-while-releasing-interface/4261cacb-e924-4d74-a349-4f3b898c27a9
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Error occurred while getting a schedule list.The system cannot find the fil

Hi all,
If i open the "packages shedule status".I am getting error like "Error occurred while getting a schedule list.The system cannot find the file specified".How to fix this issue?.Anyone have idea please share.
Thanks in advance
AD

Hi Venkii,
This kind of error message is usually fixed by deleting all entries in tblSchedule table and in tblScheduleHist table in SQL, and then deleting all schedules in the Scheduler server (Control Panel --> Scheduled Tasks)...
Hope it will help...
Kind Regards,
Patrick

System error 3 has occurred. The system cannot find the path specified

Enterprise Manager 12c Release 2 - 12.1.0.2.0
Agent Deployment Failed - host agent for Windows 32 bit, version 12.1.0.2
Deployment Phase Name: Secure Agent
Error: Execution of command C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent' on host myhost.mydomain.com Failed
Cause: Error Message: System error 3 has occurred. The system cannot find the path specified. Exit Code :2
Recommendation:
Fix the cause of the error and retry the operation (or) manually run the following commands on the remote host
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat secure agent'
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent'
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat config agent addinternaltargets'
Any ideas? thanks

I installed Cygwin, and it's working fine I suppose. From my EM12c host I can connect to the Windows host via SSH:
ssh WinHost
The authenticity of host 'WinHost (XXX.XXX.XXX.XXX)' can't be established.
RSA key fingerprint is XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'WinHost' (RSA) to the list of known hosts.
oracle@WinHost's password:
Last login: Wed Sep 19 17:26:40 2012 from SomeHost
oracle@WinHost ~
$ cygrunsrv -h
Usage: cygrunsrv [OPTION]...
Main options: Exactly one is required.
-I, --install <svc_name> Installes a new service named <svc_name>.
-R, --remove <svc_name> Removes a service named <svc_name>.
----------------- blah blah blah ------------------------------------
Report bugs to <[email protected]>.
oracle@WinHost ~
$ date
Thu, Sep 20, 2012 10:10:01 AM
oracle@WinHost ~
$ cd /cygdrive/c/oracle/product/emagent12/ - this is the folder where I try to install the agent
oracle@WinHost /cygdrive/c/oracle/product/emagent12
$ ls -la
total 0
drwx------+ 1 oracle None 0 Sep 20 09:55 .
drwx------+ 1 WinHostAdmin None 0 Sep 19 12:31 ..
Thanks

While loading site collection in SharePoint 2010, Error shows "Could not find the file or assembly or one of its dependencies. The system cannot find the file specified."

I have restored one web application in SharePoint Server 2010 from a different domain and can complete successfully. Changed each users domain also to old to new one by using Move-SPUser. But While accessing the site collection it is showing an error
that "Could not load file or assembly 'A##.SP.Intranet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=03b4f320ebedaffc' or one of its dependencies. The system cannot find the file specified."
What may be the reason? Please help me to solve this issue since I am stuck up on this .
Regards
Mine1981

Hi Nico
Martens,
Thank you for your reply. But
how can I find out the custom solutions in the source farm. I didn't got any other details regarding this farm other than WSS_Content, Web application Database, SharePoint_Config database back ups.
Please help me to solve the
issue.
Regards
Mine

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a H

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.

Nevermind I fixed it. Thank you.

Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specif

Hi All,
I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified..
Editing the web.config and adding dependentAssembly didnt worked for me.
What could be the issue? Any suggestions ?
Thanks in advance...
Regards
Nimisha
[email protected]

Hi,
Please try to do as follows:
1. Check your farm solution whether reference the Microsoft.SharePoint.dll. Or try to add the Microsoft.SharePoint.dll into the bin folder.
2. Execute the iisreset command.
3. Create a new farm solution and check whether the issue still occurs or not.
Best Regards
Dennis Guo
TechNet Community Support

Release Management error "The system cannot find the file specified"

We are getting the above error when deploying to a set of 4 servers (all belong to a tag). The deployment succeeds for 3/4 servers. For the server that fails, there is no tool or command output log to look at. We are able to log on to the
server in question and run the command manually (i.e. .\msiexec <filename.msi>) and that succeeds.
What can we do to troubleshoot this further?

Thanks, John. We are using Update 4. I enabled the details logging on the deployment agent and saw the following. The POSValidationSvc_Installer.msi file is available in the 201501200901505104929-7 folder:
Deployment: **********Installation will be done from this folder: "C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM\POS_HQ_MSI_INSTALLER\201501200901505104929-7"
1/20/2015 9:01:51 AM - Information - (12004, 11168) - Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.InstallComponentForDeployerImplementation:
Deployment: **********Installing component using command "powershell -File ./msiexec.ps1 -MsiFileName "POSValidationSvc_Installer.msi" -MsiCustomArgs "" /i /qn /l*v"
1/20/2015 9:01:53 AM - Information - (12004, 11168) - Deployment: Invoke Get-ExecutionPolicy
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: FilteredReleaseComponentName C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM POS_HQ_MSI_INSTALLER
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: FileExists C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM\POS_HQ_MSI_INSTALLER\201501200901505104929-7\powershell
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: FilteredReleaseComponentName C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM POS_HQ_MSI_INSTALLER
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: FilteredReleaseComponentName C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM POS_HQ_MSI_INSTALLER
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: Starting process -File ./msiexec.ps1 -MsiFileName "POSValidationSvc_Installer.msi" -MsiCustomArgs "" /i /qn /l*v, powershell, C:\Users\<deploymentAgentServiceAccount>\AppData\Local\Temp\RM\T\RM\POS_HQ_MSI_INSTALLER\201501200901505104929-7
1/20/2015 9:01:54 AM - Information - (12004, 11168) - Deployment: Detaching process event handlers
1/20/2015 9:01:54 AM - Error - (12004, 11168) - The system cannot find the file specified: \r\n\r\n   at System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo)
   at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.ExecuteProcess(ProcessStartInfo startInfo, String argumentsWithStarsForPassword, Int32 timeoutInMilliseconds)
   at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.InstallComponentForDeployerImplementation(String application, String arguments, String argumentsWithStarsForPassword, Func`3 accountForPowerShellBug, Func`2
verifySecurityRestriction, Func`2 fileExists, Func`4 executeProcess, Action writeProcessOutputLog, Action readCustomLog, Action readAutoLog)
   at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.InstallComponentForDeployer(String application, String arguments, String argumentsWithStarsForPassword)
   at Microsoft.TeamFoundation.Release.DeploymentAgent.Services.Deployer.ComponentProcessor.DeployComponent()

DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))

DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))
Can I know what this mean? It completely fail all entire job.
Backup was on half way go, it already took about 3TB data and it fail.

Hi Oneoa,
Please verify the antivirus exeptions. Look at this two links for more information:
http://technet.microsoft.com/en-us/library/ff399439.aspx
http://support.microsoft.com/kb/928840
I hope this solves your problem, please post your progress so I may assist you further.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com

While creating web application prokect getting error: The system cannot find the file specified. (Exception from HRESULT: 0x80070002)

I am getting error on creating even the empty web application project. The error message is as given below:
The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
I am using following build of Visual Studio:
Visual Studio Professional 2013. Version 12.0.30723.00 Update 3
Looks like it is the problem with the installation of the visual studio. But I can't take risk of re-installing now because it would stop my going on development work.
Any would help to resolve this would be appreciated.
P.S. I am also having Visual Studio 2010 and Visual Studio 2012 Ultimate on my system.
Regards, Randeep

Hello Randeep,
Will you get the same error when creating any other apps, like C# WinForm?
If only web application project has the problem, you can try the following to reset the templates:
Please open Windows Explorer, and navigate to <Visual Studio Installation Path>\Common7\IDE (by default is C:\Program Files \Microsoft Visual Studio 12.0\Common7\IDE);
Delete the ItemTemplatesCache, ProjectTemplatesCache folder;
Open Visual Studio Tools/Developer Command Prompt for VS2013
under Start menu -> All Programs -> Microsoft Visual Studio 2013 -> Visual Studio Tools (run it with Administrator privilege: right-click the program -> Run as administrator);
Run the devenv /InstallVSTemplates switch;
Run the devenv /Setup switch
If all your projects get this error, please try repair the installaiton from control panel first. By the way, can you use Visual Studio Web projects before you get this error? And have you tried to use the Visual Studio Update 4, I see you still used
Update 3, is there any reason for you to still use the Update 3 version?
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo),

Dear All,
I am getting a below error while doing ehp6 installation on sybase (high availbility )
can any one help me on this..?
An error occurred while processing option SAP Business Suite 7i 2011 > Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > SAP ASE > High-Availability System > Database Instance( Last error reported by the step: System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo), line (646) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp), stack trace: d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\ejscontroller.cpp: 181: EJSControllerImpl::executeScript() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\jsextension.hpp: 1059: CallFunctionBase::call() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\osmod\iaxxbprocess.cpp: 423: CIaOsProcess::start_impl() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 238: CSyChildApplicationImpl::start(false) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 262: CSyChildApplicationImpl::doStart() .). You can no
Regards,
Letz..

Hello Mauricio.
Thanks
Two Thinks:
1.- This error appears precisely in the process of creating SAP users including you mention sidadm:
      A.- Execute sapinst
      B.- Installation option is chosen
            SAP NetWeaver CE Production Edition
                    Installation Options
                        High-Availability System
                              Central Service Instance (SCS)
       c.- System ID, Next and appear message error
2.- However, the user manually create sidadm, I gave the permissions you indicate, and the error message is the same
Thanks

Error message on my development workstation: The system cannot find the file specified.

Post Author: cseverin
CA Forum: Crystal Reports
Hi,
I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database. I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue. The problem seems to be with Crystal Reports.
I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it. I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them. All worked fine.
To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report. After doing this, the preview no longer worked.
Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it. In the code behind the page I wrote:
Option Strict On
Imports System.Data
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Partial Class Reports
     Inherits System.Web.UI.Page
     Private objOpenFilesreport As OpenFilesReport
     Private rptOpenFiles As ReportDocument
     Private strLastErrorMessage As String = Nothing
     Private errLastException As Exception = Nothing
     Dim strFileKey As String
     Dim strJurisdictionCode As String
     Dim strStaffId As String
     Dim strReportId As String
     Private Sub ConfigureCrystalReports()
          Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
          Dim rptopenfiles As New ReportDocument
          rptOpenFiles.Load(reportPath) <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports     folder of my project
          Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
          ConnectionInfo.DatabaseName = my database
          ConnectionInfo.UserID = login id of user
          ConnectionInfo.Password = user's password
          SetDBLogonForReport(ConnectionInfo, rptopenfiles)
          CrystalReportViewer1.ReportSource = rptopenfiles
     End Sub
     Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
         ConfigureCrystalReports()
     End Sub
     Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
          Dim myTables As Tables = myReportDocument.Database.Tables
          For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
               Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
               myTableLogonInfo.ConnectionInfo = ConnectionInfo
               myTable.ApplyLogOnInfo(myTableLogonInfo)
          Next
     End Sub
End Class
I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it. When I run the website in Visual Studio and click on the hyperlink I get the following:
Server Error in '/MyTest' Application.
The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[COMException (0x80004005): The system cannot find the file specified.
]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
   CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
   CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
   CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
   CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
   CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
   System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas, anyone?
Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file. I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries. But how do I call these functions at the time the report is run?
This is my first Crystal report written in .NET and I've been struggling with it for days now. Any help would be most appreciated!
Thanks very much!
Chris Severin

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

Receiving error message 'Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.'

I started getting this error message for the first time today. When I look in the event log I see it every time anyone tries to sync to a mobile device to the exchange server. I've also had this problem trying to connect using
Outlook. I believe it is an IIS issue but I'm not absolutely sure so I'm posting this in the Exchange forum as well.
The event viewer has the following information...
3008
A configuration error has occurred.
5/1/2014 10:41:08 PM
5/2/2014 5:41:08 AM
7539d8a38c8b47869eda3f1749aba08d
1
1
0
/LM/W3SVC/1/ROOT/Microsoft-Server-ActiveSync-75-130434828686436855
Full
/Microsoft-Server-ActiveSync
C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\sync\
SERVER
16284
w3wp.exe
NT AUTHORITY\SYSTEM
ConfigurationErrorsException
Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
https://remote.testserver.com:443/Microsoft-Server-ActiveSync/default.eas?User=user.name&DeviceId=ApplC39GQ5xxxxxx&DeviceType=iPhone&Cmd=Ping
/Microsoft-Server-ActiveSync/default.eas
174.224.130.31
False
NT AUTHORITY\SYSTEM
24
NT AUTHORITY\SYSTEM
False
at System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) at System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) at System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) at System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
I have tried most, if not all, of the different post's suggestions to no avail.
The steps I have taken are as follows...
1. Repaired .Net 4 (Both the client and extended)
2. Uninstalled and reinstalled .Net Framework 4.0.
3. Verified that the dll exists.
4. Checked the applicationHost.config file. It contains the follow statement...
<add name="ServiceModel-4.0" type="System.ServiceModel.Activation.ServiceHttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0"
/>
5. Changed the following line in web.config to include the runtimeVersion...
<add name="ServiceModel" type="System.ServiceModel.Activation.HttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0" />
6. Executed aspnet_regiis.exe -iru from the ...\Framework64\v4.0.30319 directory.
7. Went to inetpub\history to use an applicationHost.config file from yesterday but it only has history from 9PM tonight. It probably had what I needed before I started changing it tonight.
I still receive the same error message.
Like I said everything was working yesterday. In fact I didn't hear or see any issue until after 1PM today.
Any help would be very appreciated!

Hi,
Please confirm whether users can access their mailboxes from Outlook Web Access or not. We can do the following changes to have a try:
1. In IIS > Application Pools, change the .NET Framework Version to v2.0 and restart IIS service.
2. If it doesn’t work, explore the Default Web site.
3. Renamed the web.config file to web.config.old
4. Reset IIS using iisreset command to have a try.
Thanks,
Winnie Liang
TechNet Community Support

Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003

I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.

I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks.

[Forum FAQ] Cannot perform a backup schedule via Windows Server Backup and receive "The system cannot find the path specified." Error

Symptom One
You attempt to
schedule a backup every day via Windows Server Backup on Windows Server 2008 R2. At the beginning, the backup works without issue. But after a few days it failed and you receive the error “Windows Server Backup:
The system cannot find the path specified.”
Cause
The issue may occur if there is
no shadow copy storage space available on the backup volume.
Verify
You can use the List ShadowStorage command to check if you have enough storage space to store the newly created shadow copy. If you've reviewed the size of the backup snapshot and discovered
that there is no allocated space for the storage association, you need to resize shadowstorage.
Solution
You could run the command below to create shadow copy storage space on the backup volume:
vssadmin resize
shadowstorage /for=<ForVolumeSpec> /on=<OnVolumeSpec> [/maxsize=<MaxSizeSpec>]
More Information
Vssadmin resize shadowstorage
http://technet.microsoft.com/en-us/library/cc788050.aspx
Symptom Two
When you add
another external hard drive to backup schedule via Windows Server Backup on Windows Server 2012, it fails and you receive the error “The System cannot find the path specified.”
Cause
The issue is due to the
Original Destination Disk was not attached to the server.
Verify
You could check the disk status in Disk Management to see if the Original Destination Disk is offline or removed.
Solution
You need to attach
Original Destination Disk to the Server then choose another external hard drive as backup target. After that, you could remove the Original Destination Disk.
Workaround
To work around this issue, please use the WBADMIN command line tool to add disk.
WBADMIN ENABLE BACKUP -addtarget :{ DiskID}
The AddTarget parameter takes disk ID as parameter. It can be retrieved by running "WBADMIN GET DISKS" command.
Example:
WBADMIN ENABLE BACKUP
-addtarget :{ aa123d14-bba0-1dd9-0d93-80aaaa6bbb63}
More Information
Wbadmin enable backup
http://technet.microsoft.com/en-us/library/cc742130.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

good

The system cannot find the file specified error in ftp upload

Hi,
i am using filezilla ftp server and apache common ftp client and while uploading a file i am getting below error:
code to call ftp client
String local_file ="D:\\home2.JPEG";
String remote_file ="\\abc";
ApacheFTPClient apacheFTP = new ApacheFTPClient();
String[] abc ={"-s", "127.0.0.1", "Manender", "Manender", remote_file, local_file};
apacheFTP.main(abc);
error log:
220-FileZilla Server version 0.9.31 beta
220-written by Tim Kosse ([email protected])
220 Please visit http://sourceforge.net/projects/filezilla/
Connected to 127.0.0.1.
USER Manender
331 Password required for manender
PASS Manender
230 Logged on
SYST
215 UNIX emulated by FileZilla
Remote system is UNIX emulated by FileZilla
java.io.FileNotFoundException: D:\home2.JPEG (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at com.po.ApacheFTPClient.main(ApacheFTPClient.java:152)
     at com.po.sample.main(sample.java:120)
i have file in my d directory with same name.
please help me in this.
thanks in advace..

i have file in my d directory with same name.Doesn't look like that? Are you sure that it isn't named e.g. home2.jpg?

An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified

Similar Messages

Maybe you are looking for