An error occurred while trying to access the service when trying to access adobe send since feb 28

I have been trying to access my adobe send to send some files keep getting error message : an error occured while trying to access the service"
everything was fine up until yesterday...

Is that "SendNow"? If so you may get better help in the SendNow forum here: http://forums.adobe.com/community/sendnow

Similar Messages

How to solve 'An error occurred while backing up this iPad (-35)' when trying to update to IOS 5?

My iPad (first generation) is currently on 4.3.5. I have been trying to upgrade it to IOS 5 several times since IOS 5 release but keep on getting the following messages:
I press CONTINUE and get:
and MORE INFORMATION gives me http://support.apple.com/kb/TS1275
I cannot find error -35 and I've tried everything that has been suggested. Any help would be appreciated (had no problem with my iPhone 3GS upgrade).
Many thanks in advance!

So you used your own manual back up after updating , and that worked?
Im a bit gun shy to try as i dont want to lose my data

Using CS6, not cloud version. Have Adobe extension mgr. Getting error code "An unexpected error occurred while attempting to verify this extension" when trying to install a plug in.

What can I do to overcome this error?

I apologize, but Adobe's web site is difficult to navigate as it seems they are more interested in "cloud" products and finding that page that you suggest I download again from is next to impossible!
Can you provide me with a link?
Thank you for your assistance.
Jerry
Sent from my iPhone

Trying to install Lightroom on a MacAir and I get an error message that an error occurred while evaluating JavaScript for the package

Error occurred while evaluating JavaScript for the package. Trying to install a Lightroom 5.6 download on an AirMac 10.9.4 OS. Already installed on my Mac laptop. Tried restating laptop but got the same error message

Hi,
Just wanted to say I found out the answer. I should have looked first to see if anyone else was having the same problem but I didn't.

Keep getting this message when trying to back up iMac to time Machine: Unable to complete backup. An error occurred while copying files to the backup volume.

Keep getting this message when trying to back up iMac to time Machine: Unable to complete backup. An error occurred while copying files to the backup volume. tried everything.

Pondini's Time Machine FAQ for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
Time Machine- Troubleshooting backup issues

SQL Service Broker 2012: the connection was closed by the remote end, or an error occurred while receiving data: '64(The specified network name is no longer available.)'

Anyone can help with the below issue please? Much appreciated.
We have about 2k+ messages in sys.transmission_queue
Telnet to the ports 4022 is working fine.
Network connectivity has been ruled out.
The firewalls are OFF.
We also explicitly provided the permissions to the service account on Server A and Server B to the Service broker end points.
GRANT
CONNECT ON
ENDPOINT <broker> <domain\serviceaccount>
Currently for troubleshooting purposes, the DR node is also out of the Availability Group, which means that we right now have only one replica the server is now a traditional cluster.
Important thing to note is when a SQL Server service is restarted, all the messages in the sys.transmission queue is cleared immediately. After about 30-40 minutes, the errors are continued to be seen with the below
The
connection was
closed by the
remote end,
or an
error occurred while
receiving data:
'64(The specified network name is no longer available.)'

We were able to narrow down the issue to an irrelevant IP coming into play during the data transfer. We tried ssbdiagnose runtime and found this error:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>SSBDIAGNOSE -E RUNTIME -ID 54F03D35-1A94-48D2-8144-5A9D24B24520 Connect to -S <SourceServer> -d <SourceDB> Connect To -S <DestinationServer> -d <DestinationDB>
Microsoft SQL Server 11.0.2100.60
Service Broker Diagnostic Utility
An internal exception occurred: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
P 29830 Could not find the connection to the SQL Server that
corresponds to the routing address tcp://XX.XXX.XXX.199:4022. Ensure the tool is connected to this server to allow investigation of runtime events
The IP that corresponds to routing address is no where configured within the SSB. We are yet unsure why this IP is being referred despite not being configured anywhere. We identified that this IP belongs to one of nodes other SQL Server cluster, which has
no direct relation to the source server. We failed over that irrelevant SQL Server cluster and made another node active and to our surprise, the data from sys.transmission_queue started flowing. Even today we are able to reproduce the issue, if we bring
back this node [XX.XXX.XXX.199] as active. Since, its a high business activity period, we are not investigating further until we get an approved downtime to find the root cause of it.
When we get a approved downtime, we will bring the node [XX.XXX.XXX.199] as active and we will be running Network Monitor, Process Monitor and the SSB Diagnose all in parallel to capture the process/program that is accessing the irrelevant IP.
Once, we are able to nail down the root cause, I will share more information.

Recent backups fail: "An error occurred while copying files to the volume."

I recently moved to a new place and set up Time Capsule as a bridge. Backups were working fine for the first couple days but then, out of the blue, I got a message that said the password I entered for Time Capsule was incorrect. I entered the correct password and hit OK. Time Machine was able to connect but now backups fail with this error: "Unable to complete backup. An error occurred while copying files to the backup volume."
Time Machine indicates it is "preparing backup" for a few minutes, then sits at "zero of __MB completed" for a long while, finally starts backing up and gets to the end but then fails. Console indicates "unexpected reply from backup server; ignored."
None of these attempts have fixes my problem:
--I have deleted my TC passwords in Keychain Access.
--I have tried downloading the latest Airport Utility and re-entering the TC disk's password in both Airport Utility and in Time Machine preferences.
--I have restarted my computer and unplugged & plugged back in TC.
My Internet connection works fine; TC's light is solid green. I can enter Time Machine to restore backups without a problem. The backups just fail every time now. Any ideas?

The problem really isn't the speed of the backup; it's done in 5-10 minutes, but each time it finishes, TM reports it has failed. I don't believe plugging it in overnight or letting TM try over and over will fix the problem. I've tried to manually start backups a number of times, and have let TM try to start and complete them on its own but they consistently fail.
It would be an awful shame if I had to delete my old backup--I bought the Time Capsule for the specific purpose of having backups that go back months and I don't want to lose what I've already backed up.

"An error occurred while extracting files from the package "BaseSystem.pkg".

Hello!
I have a
MacBookPro5,5
Prozessortyp:Intel Core 2 Duo
Prozessorgeschwindigkeit:2.26 GHz
Anzahl der Prozessoren:1
Gesamtzahl der Kerne:2
L2-Cache:3 MB
Speicher:2 GB
Busgeschwindigkeit:1.07 GHz
Boot-ROM-Version:MBP55.00AC.B03
SMC-Version (System):1.47f2
Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
Problem:
I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation: 139 MB wired, 259 MB trapped, 397 MB active, 7 MB inactive, 1246 MB free, 1650 MB usable, 2048 MB total

It sounds to me like your Internal Hard Drive is failing.
I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

10.8.2 update: can't install "error occurred while evaluating Javascript for the package"

Greetings All-
I'm trying to update from 10.8.1 to 10.8.2 on my Macbook Air. When I downloaded the .dmg from Apple and ran it, I got the following error:
"OS X Update Can't be installed on this disk. An error occurred while evaluating JavaScript for the package."
So far, I've done the following, all to no avail:
(1) Updated Java to v7 per Java's website, no change
(2) Downloaded the 10.8.2 combo update, no change
(3) Found Apple's OS X Java update (which is still at v6)- get an error at install that "the contents of the disk can't be changed"
(4) Restarted at each step
Does anyone have any suggestions or ideas?
Thanks!

Permission repair, too?
Take a look here: https://discussions.apple.com/thread/3811748?start=0&tstart=0
And possibly here: https://discussions.apple.com/thread/3889562

Time Machine will not complete a system backup and terminates with "Unable to complete backup. An error occurred while copying files to the backup volume. This follows a problem when Time machne terminated when the volume was almost full.

On 11/1/2011, Time Machine (TM) terminated with an error message I did not record. I noted that the drive was full and decided to do a separate complete bootable system backup using Carbon Copy Clone (CCC), before clearing the TM volume and trying to start it over clean. Part way through the full system backup CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". That was about the time that TM malfunctioned, so I assumed they were related. After starting CCC over a couple of times, and getting the same error message, I let it go through to completion of the backup, which took three or four hours. I then ran tests using Disk Utility and verified that there was nothing physically wrong with both the internal hard drive and the TM volume. I also erased and reformatted the TM volume. However, every time I started Time Machine, it would record a few GB and terminate with "Unable to complete backup. An error occurred while copying files to the backup volume". I restarted the computer with no change in results. Note that prior to starting the CCC backup, I "Repaired Permissions", "zapped the PRAM" and "re-set the SMC", hoping to have a clean bootable system on the backup. I ran Techtool and no problems were found.
I'm running this on an Intel iMac under 10.5.8 and recording to a 500GB My Passport drive. My hard drive is only about half full at 246 GB. My assessment is that something happened at 16-28-16 on 11/1/2001 to screwup the Backup Directory in the file at "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". My question is, how do I fix it?
I had just completed writing everything above here, explaining the problems I had been encountering for the past 24 hours. I had the Time Machine window standing open on the desktop where I could see it, having recentlycleared it after the last termination. As I was proofing what I had written, I looked at the window and noted that the clock had started a new run for a full back up, since all prior efforts had failed and the TM volume was empty. As I watched and waited for it to fail again, as it had been doing at about 13 GB, it kept going and going until it just finished a complete backup, about 4.5 hours later, with my having done nothing. Now my question would have to be - what could possiibly have happened to make it perform this way? It will be interesting to see if it continue to operate normally, or if the problem will return, in a later backup run.

jcm21 wrote:
CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16"
You should not keep those files for long, and probably shouldn't back them up (if you need them at all -- since you do regular backups, I'm doubtful just how worthwhile that feature is).
"Unable to complete backup. An error occurred while copying files to the backup volume".
One of Apple's maddeningly incomplete messages. Most likely, there's a problem with a file (quite possibly the one CCC didn't like). See #C3 in Time Machine - Troubleshooting for details and instructions on finding and fixing it.
If you continue running the Directory Protection app, be sure to exclude your Time Machine drive from it (as it will just take up lots of room, and won't help repair your backups if there's a problem); and exclude the folders it creates from being backed-up by Time Machine (as they'll create large backups, and you probably can't use the backed-up folders anyway), per #10 in Time Machine - Frequently Asked Questions.

"Adobe Photoshop Lightroom 5.4 can't be installed on this disk. An error occurred while evaluating JavaScript for the package."

Hi there,
I'm getting this error on trying to install / update LR 5.3 to 5.4:
"Adobe Photoshop Lightroom 5.2 can't be installed on this disk. An error occurred while evaluating JavaScript for the package."
I hope there's somebody that can help me out here.
Cheers

Hi kglad,
Sorry for the late response:
Here's the screenshot you wanted:
It's in Dutch but it 's exactly the same as posted above by abphoto.biz
I'm running OS X Maverick on an early iMac (2007). No problems until now.....
Hope you can help,
Cheers

TM Error. An error occurred while linking files on the backup volume

I have a 1TB Time Capsule. It's been working great for over a month. I'm now receiving an error.
Time Machine Error
Unable to complete backup. An error occurred while linking files on the backup volume.
I don't know what has happened to cause this error. Does anyone know what has happened and how to fix this? The first time I received this error was when it showed under Available it had over 500 GB and was backing up 89.1 GB. Then the error. The backup scheduled time came up and TM started to backup again. Again with the error. The next time it backed up I made a note of the figures it showed. It starts the backup process "Preparing" and shows under Available 389.1 GB of 929.5 GB. Then Preparing shows that it's backing up, 13.5 GB. Then I get the error pop up. I check Time Machine and under Available it shows 370.3 GB of 929.5 GB. The scheduled time came up again. Available shows 370.3 GB of 929.5 GB and that it's backing up 18.9 GB. I'm trying to see if there is a pattern, for instance 389.1 GB - 370.3 GB = 18.8 GB. It's not 18.9 GB, but it's close. I'm wondering if there is a point which causes the backup to fail and figure out if this can be fixed. I'm stumped. The backups keep getting an error but the Available amount keeps getting lower. Again, any help would be appreciated. Maybe you see something I don't. Thank you.

I forgot to state this in my post; what I noticed beside "Latest Backup", is that it states "Failed ! (! is in a red circle)". (So why does the "Available" amount keep going down? Where is the disk storage space going if it's not backing up?). It started the backup again, it initializes "Latest Backup" by showing a blank. I was curious what it showed when I went into Enter Time Machine. I guess the last good backup was Sunday July 27, 2008 11:21 PM. That's what it shows prior to the NOW selection on the right. The Oldest Backup is June 19, 2008. I thought this might be useful to note.
I thought it would be a good idea to see what Time Machine is doing and record the steps. I know it will involve time and patience, but hopefully I'll find out something. It might be of use to someone.
- It's backing up again and it gets to the point showing that it backed up 18.8 GB of 18.9 GB and stays there for 20 minutes or so.
- Then it shows 18.9 GB of 18.9 GB, and stays at that point for a while.
- Available shows 351.5 GB of 929.5 GB.
- The Failed ! comes up again in Latest Backup. and backup stops.
- Again it looks like the disk storage is used up. (So the questions would be; 1. If the backup failed, where is the space going if the backup failed? 2. How can I get back what should be available and have it show the correct available amount?
It came up to the time it backs up again. It shows that the backup amount will be 18.9 GB. I turned Time Machine OFF. It looks like it will do the same thing. Does anyone know what is happening and what needs to be done to correct this and get my available space back with it recording the correct available amount (xxx.x GB of 929.5 GB)

An error occurred while running scripts from the package "ztb343812063996219254.pkg

i tried to upgrade my os lion 10.7.5 to os x yosemite on my macbook pro and in the middele of downloading I'm getting this notice: an error occurred while running scripts from the package "ztb343812063996219254.pkg
help me please…..
i think i have problem with the app store cause sometimes I'm getting more errors like error no 13 or 100
what should i do?

An error occurred while starting "OCMRepeater". The component was not found

I just built up an OVM 2.2 machine and then installed the manager 2.2 template followed by the 10.2.0.5 OMS Grid control template. I've got all the systems up and functional via those templates at this point but the Grid Control server starts up with 2 targets down. When I dig into it it really looks to only be the OCMRepeater under the Application Server and so both the Application Server and the OCMRepeater show as down targets. When I try to start the OCMRepeater from the I am asked for the OS username and password. I supply it with username oracle and the oracle password, which I have verified by logging into the VM. When I hit continue it tells me it is starting the component and then comes back with the following message.
An error occurred while starting "OCMRepeater".
The component was not found in the Oracle Home.
On a fresh install I really think that my Overview pie chart should be a 100% up all green affair. Can anyone give me a hand and help me figure out how to get everything running properly here?
Thanks,
Harold

Hi
I tried, but no luck.
./opmnctl status
Processes in Instance: EnterpriseManager0.rhel
-------------------+--------------------+---------+---------
ias-component      | process-type       |     pid | status
-------------------+--------------------+---------+---------
DSA                | DSA                |     N/A | Down
HTTP_Server        | HTTP_Server        |    2459 | Alive
LogLoader          | logloaderd         |     N/A | Down
dcm-daemon         | dcm-daemon         |    7308 | Alive
OC4J               | home               |    2460 | Alive
OC4J               | OC4J_EM            |    2461 | Alive
OC4J               | OC4J_EMPROV        |    2463 | Alive
WebCache           | WebCache           |    2496 | Alive
WebCache           | WebCacheAdmin      |    2464 | Alive
./oc4j_OCMRepeaterDeploy.sh $ORACLE_HOME
ADMN-300072
Base Exception:
OracleAS instance: Oracle Home: /u00/oms10g OC4J component: OCMRepeater is down
Resolution:
opmnctl: stopping opmn managed processes...
================================================================================
opmn id=rhel:6201
    no enabled components for this request
ADMN-300105
Base Exception:
J2EE application: OCMRepeater has already been deployed. Redeploy needs to be used to override previous deployed application
Resolution:
opmnctl: starting opmn managed processes...
================================================================================
opmn id=rhel:6201
    no enabled components for this request

An error occurred while trying to access the service when trying to access adobe send since feb 28

Similar Messages

Maybe you are looking for