An error occurred while trying to start Isengard - Cannot start Wily IEM
Dear SAP,
I have installed Wily IEM 8.2.2.0 in my Solution Manager server (windows 2008).
I can start the service Introscope Enterprise Manager, but in the log, I get this error :
INFO | jvm 1 | 2011/01/04 10:25:31 | Introscope Enterprise Manager failed to start because:
INFO | jvm 1 | 2011/01/04 10:25:31 | An error occurred while trying to start Isengard.
INFO | jvm 1 | 2011/01/04 10:25:31 | Press 'Enter' to acknowledge....
1. I have assigned SIDuser to the service
2. I have also read and apply 1273028 OSS recommandations.
Thanks for your help.
Best regards
SAP NetWeaverAdmin
Dear Everyone,
I got the same error. Today, I checked the log and it said something about Display 0.0. I guess the EMCtrl only works on graphical environment and I think I'm right. I run ./EMCtrl.sh through xmanager and it started and still started.
Maybe SAP create the scenario incorrectly by assuming the wily introscope can only be started on graphical environment. This is not wily introscope mistake, because if I install the wily manually, I can start it from ssh.
Similar Messages
-
Not sure if this is the right place to ask about this but since my question concerns an extension I'll give it a shot.
I'm trying to use the Visual Studio 2013 Concurrency Visualizer extension to debug a simple test console application. I've set executive paging to disabled in the registry as it directed and hit "add SDK to project" in the concurrency
visualizer menu options. And of course, restarted my computer to apply the settings. When I try to "start [the concurrency visualizer] with current project" I get an error popup:
"An unknown error occurred while trying to start the collection process."
I really need the concurrency profiling to start debugging contention in my multithreaded application. Prompt assistance would be much appreciated.Hi,
This forum is to discuss and ask questions about extending and integrating with Visual Studio (using the Extension Manager, building VSX containers for deployment, Visual Studio SDK, and more), Visual Studio Online (REST APIs, service hooks, and OAuth),
and Team Foundation Server.
You have problems when using Concurrency Visualizer Extension, please ask in
the page under "Q AND A". Since Concurrency Visualizer is a diagnostic tool, you can post this issue in
Visual Studio Diagnostics (Debugger, Profiler, IntelliTrace) forum too.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
An error occurred while trying to start the Windows Deployment Services server
After rebooting the server, I cannot start the Windows Deployment Services anymore.
It worked perfectly before the reboot. When starting it manually these errors appear in the event log:
The Windows Deployment Services Server service terminated with service-specific error 1460 (0x5B4).
An error occurred while trying to initialize multicast manager. Windows Deployment Services server will be shutdown.
Error Information: 0x5B4
An error occurred while trying to start the Windows Deployment Services server.
Error Information: 0x5B4
This is on server standard beta 3.I have removed the server from the WDS, then I have uninstalled the role, rebooted, reinstalled the role.
When I started the WDS the server was back in there, but when I wanted to start the service I got the message "the windows deployment services configuration is corrupt". I have triggered these commands to reset this:
Code Snippet
wdsutil /Verbose /Progress /Uninitialize-Server
Windows Deployment Services Management Utility [Version 6.0.6001.16510]
Copyright (C) Microsoft Corporation. All rights reserved.
Tearing down server...
== Original server operational mode: Native ==
-> Resetting setup state
-> Disabling and resetting Windows Deployment Services services
-> Removing server BINL SCP
-> Removing Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST
== Final server operational mode: Not Configured ==
The command completed successfully.
Then i did this command, but again it failed to start at the end.
Code Snippet
C:\Windows\system32>wdsutil /Verbose /Progress /Initialize-Server /REMINST:"c:\R
emoteInstall"
Windows Deployment Services Management Utility [Version 6.0.6001.16510]
Copyright (C) Microsoft Corporation. All rights reserved.
Setting up server...
-> Creating Windows Deployment Services installation tree
---> Creating Windows Deployment Services installation root at \\LH-AJGG6OZWH9Z4
.longhorn.office\c$\RemoteInstall
---> Creating Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.of
fice\REMINST
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\x86\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\ia64\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\x64\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\Fonts
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Tmp
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Mgmt
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\WdsClientUnattend
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Templates
-> Installing Windows Deployment Services files
---> Installing system files
---> Installing boot files for x86
---> Installing boot files for ia64
---> Installing boot files for x64
-> Updating registry
-> Configuring the TFTPD service
-> Configuring BINL SCP
Enabling Windows Deployment Services services...
Starting Windows Deployment Services services...
An error occurred while trying to execute the command.
Error Code: 0x41D
Error Description: The service did not respond to the start or control request in a timely fashion.
Anyone have an idea what could be the cause? I found this additional error in the event log, but distributed file system hasn't been installed since the beginning.
DFS could not access its private data from the Active Directory. Please manually check network connectivity, security access, and/or consistency of DFS information in the Active Directory. This error occurred on root REMINST. -
An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.
Hi Everyone,
I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load. The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
fine the rest of the day, oddly enough.
A few things about my form:
1). It is web enabled
2). The form submits to a form library on the SP server
3). I use the UserProfileService data connection in the form to auto-populate a few fields
4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
5). The form has been working fine until a few days ago
I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped. Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
have the service account information.
Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
Schema file was already loaded: BuiltInActiveXControls.xsd
FormServer Partial Trust - Proxy operation invoked in the SHIM process.
FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.Hi B.,
You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
Hope this helps.
Daniel Christian (MCTS) -
An Error Occurred while trying to join "my wireless access point"
Hi,
I've been using wireless access for a year and never had a problem connecting.
But starting yesterday I get a +*An Error Occurred while trying to join "my wireless access point", Please try again.+* Message.
I have 2 Mac's and have no problem connecting with the other one. It’s just the IMac.
I tried everything including resetting router, changing password, adding a $ to the password, accessing without password, deleting the whole air port and create a new one, but still getting the same message.
I might need to add, while I was working with the IMac I didn’t use wireless for a few hours, but when I got back to my browser I noticed that I was connected to a different wireless service. (FONFREEINTERNET if it matters) I have no idea why, since I didn’t change it.
Anyways, I tried to switch back to my access point, but it wouldn’t let me. It’ll just give me the +*An Error Occurred while trying to join "my wireless access point", Please try again.+* Message.
Funny is when I use the FONFREEINTERNET access point the internet seems to work fine.
I could look up Google without a problem, but when I tried to connect to Facebook for example it won’t let me. Instead a FONFREEINTERNET page will pop up with some options on how to pay! (by minute/or day/or week…)
I get the strange feeling that they planted some kind of bug/virus!!!
I don’t know what else to do.
Anyone knows that problem? What can I do?
Any help is greatly appreciated!
I researched on FONFREEINTERNET, there’s a spot close to my house/guess that’s the one I used…
http://maps.fon.com/ ZIP CODE 904-0113 and you’ll see a coffee pod, which is about 2 minutes walk from my house.Hello Tesserax,
I get the same error message again...
I tried the 3 suggested steps again, but unfortunately it did not work.
After a Restart, Sleep or just the awaking from Screensaver mode I’m disconnected from my wireless Network anymore.
Even if the Computer was asleep for just a second!
I am able to fix the problem temporarily with Network Preferences → Assist me → Diagnostics
Choose Airport → Choose network → Enter Password (Even if I check safe password it’ll ask me every time) → and than usually all lights on the left menu switch from red to green and I get the popup message “A Network Change has been detected. Your Internet seems to work fine.” (similar - I’m at work and don’t remember exactly)
And it works fine…until the screensaver comes on or it sleeps again
I have the Problem with my IMac and Mini but the IMac at least remembers my password…
Any Ideas
I’m connected through a Buffalo WZR2-G300N wireless router -
"An error occurred while trying to save your photo library..."
Installed iPhoto6.
Started app. It said it would take a few seconds or minutes to upgrade.
About 6 hours later after churning on thumbnails it is now claiming this error over and over with some time that goes by in between:
"An error occurred while trying to save your photo library."
"Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library folder."
It says I have 22,759 photos in Library. The Library was a subset of my images, named "iPhoto Library 2005" and it was intentionally kept below the 25,000 limit of iPhoto5.
Since Steve claims iPhoto6 can easily handle 250,000 photos, I clicked on the upgrade button with confidence. This now appears to be a mistake. Last night I was working on an iDVD for the local school and the majority of that work has simply vanished. There were 320 photos. I spent hours adding keywords, ranking, adjusting temperature, focus, exposure, etc.
Of the 320, only 16 photos survived. They are 16 in a row from the middle of the roll near the end but not at the end. The roll name was lost. The name is now just "Roll 226" and none of the photos have keywords. I know at least one of the 16 should have the keyword "DUPE" and the ranking 2 STARS since it precedes a double that I ranked 2 during a slideshow, sorted by ranking, and dragged to the DUPE keyword. All 16 should have the ACROCK keyword which I initially assigned to all photos.
Again, 304 of 320 have vanished and the 16 that remain have no keywords or rankings.
I watched the slide show in iPhoto5 three times with different music candidates so I know the keywording and rankings evaporated in iPhoto6. I also clicked ACROCK and option clicked DUPE and POOR so that all of the music program photos except dupes and poor images would vanish. I only deleted one photo so there were not a lot of changes to the library in terms of photos in it. I cannot think of any reason why the 16 chosen survived. Only two were placed in a DVD dropzone and they are scattered amongst the 16 survivors.
Also, the ACROCK and DUPE keywords are also gone while the POOR keyword added in August is in the keyword table just fine.
I exported these 320 photos last night to iDVD and tried almost all of the different themes and I dragged about 10 different photos to the dropzones, hit play, hit motion, etc.
It seems very strange that 16 photos from the middle of the pack would survive.
It seems extra odd that iPhoto5 and iDVD treated these as "established" photos, not photos hanging in the wings somewhere ready to vanish in an upgrade.
I gracefully saved and quit iDVD and iPhoto5 and there were no crashes and nothing strange happened while making the DVD. I was hoping today to try out the new themes and maybe find one that is just right for the kids. Instead, about 300 of 320 photos of the kids went bye-bye along with all the work on the photos!
I'm nervous that many more photos are missing but I will need to do a ton of checking to see what else has been deleted by the upgrade.
The user message that iPhoto6 presents is nearly useless and strange. It offers little if anything to go on in terms of a repair procedure. After saying an error has occurred, it says some recent changes could be lost but doesn't expand at all on what they may be or why.
From my experience, recently added photos, keywords, keyword assignments, rankings and maybe more can all be lost. To compound matters, before the upgrade it says that you cannot go back to the prior (working!) library in iPhoto5. Beware!
It finishes by suggesting two vague steps to take. The first is to make sure your disk has "enough" space. How much is "enough"? It doesn't say something like X GB available, Y GB needed. A user would have no clue about how much space to free up. I have over 17 GB and assumed that would be enough. I sure hope it doesn't require double the space of the existing library. I would hope it has a smarter algorithm than that since 23,000 photos at about 3 MB each maps to about 70 GB. That's a lot of "temporary" space to require to perform an upgrade. Since the upgrade/error message provide no details (unlike package installers which supposedly tell you how much space you need), users like me would have no clue if 70 GB is plenty or not enough.
I found 24 GB secretly used by iPhoto 5 for an iPod Photo Cache and a tech bulletin saying this just grows and grows without control and it can be deleted SO I wouldn't put huge hidden disk usage past iPhoto6.
The last none-to-helpful suggestion is that a user make sure that iPhoto is able to access the iPhoto Library folder. Huh?!??!?
Wouldn't this be a great thing to confirm via software before setting about on 6+ hours of work, especially if there is an error message hard-coded in the software confirming that Apple knows the result may be losing valuable customer photos and hours of work on enhancing, keywording, creating DVDs, etc.?
Of course. This appears negligent. To know that customer file loss will likely result but not checking these things out in advance before taking that risk seems like putting the cart before the horse at customers' expense & pain and certain loss of irreplaceable family photos (for the, say, 80%+ of iPhoto users that "plan" to get a backup routine established?).
I got burned in the iPhoto5 upgrade as well, losing photos, so I was sure to have a backup so it wouldn't happen again. Most I fear won't be so fortunate so be advised of the risk and work with copies of your photos only.
Also, why would iPhoto5 have all the permissions it needs to store, edit, tag and otherwise work with 320 photos added last night? Why would version 5 have plenty of permissions to use the folders and the photos in them. Why would iPhoto 6 suddenly lose those permissions or not have enough? This hardly makes any sense. The only way the permissions were set, the iPhoto libraries got created and the albums got created was by dragging a folder of images onto the albums pane in iPhoto5. So, iPhoto5 set all the permissions, everything is under one user account and there should be no surprise permissions for iPhoto6 to deal with.
It seems unbelievable that iPhoto 6 couldn't do what iPhoto 5 was doing. I never changed permissions and never touched files in the iPhoto 5 structure.
I can only guess that recently added keywords, recently added photos and recently added rankings and keyword taggings linger in some at-risk staging area that a version 6 upgrade doesn't know how to deal with. This seems like a lame way to code this app so I don't consider this a good guess but what else could it be?
Anyone else have a better hunch at a root cause?
Anyone else have an idea of a cure?
Anyone else run into this?
It sure doesn't look like there was a test case for having near 25,000 photos (an iPhoto 5 documented requirement), working with the latest roll and then doing a version 6 upgrade because it failed miserably--user data loss--without any special effort to find defects. In a former life I tested software and released software was much more difficult to break than this.
I would appreciate any other user experiences/solutions related to this problem. I am reluctant to import another 22,000 photos from iPhoto Library 2004 only to find more photos go poof without any rhyme or reason.
Thanks in advance for your help and I hope this alerts others to a potential for valuable photo loss (i.e., back up before you upgrade, verify iPhoto Library permissions--whatever that means--and have scads of disk space available assuming there's any truth to the error message!).
--Sam
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)I'll check if I have copies of copies of copies. This could take a while due to the number of files.
I picked up a brand new 300 GB Western Digital hard drive thinking 20GB or so was not enough for temp files for upgrading and/or importing.
I formatted it as a mac os extended, journaled drive, not case sensitive, one full-size partition. I started iPhoto6 with the option key. I had a CF in my other WD 300 GB (with media reader). iPhoto6 asked about the photos on the card. I told it not to download those (again). Because I was holding the option key down, iPhoto6 asked if I wanted to select a different library or create one. I created one on the brand new, 100% empty 300 GB drive. I'm not sure if/where iPhoto6 creates temporary/cache files (like iPhoto iPod Cache folder) as it sets up a new library. I was hoping the empty 300 GB drive would give it ample room to load an existing iPhoto5 library.
When I dragged an old iPhoto5 Library onto the new iPhoto6 Library Album pane. I saw the "Importing..." start and it went on and on and on and... I let it run for HOURS and HOURS. When I checked around midnight, it had crashed. When I started it again, it said it had run across some huge number of stray photos.
I have no idea why iPhoto6 would have trouble importing an iPhoto5 library that was below the 25,000 photo mark for 5. This is especially bizarre since iPhoto6 claims it supports 250,000 photos!
I'll be trying to figure out if these stray photos got imported as dupes, if they lost iPhoto5 keywords, etc. I fear something different but equally bad happened since the number of photos it came up with was like 79,000--again many stray photos that didn't make it into the first import for no known reason. Since libraries in iPhoto5 were around 25,000 or less, I'm not sure what's happening.
Maybe there's a cache or temp file still created on Macintosh HD and not on the empty new 300GB drive and a bug exists for imports when space on Mac HD is "low" (i.e., under 3.5 GB). Maybe it's seeing thumbs as files it should import? Maybe it's seeing Orig and Modified images as worthy of reimporting?
I had told it not to import dupes but who knows if it goes by file name, checksum, byte-for-byte comparison, etc.
I'm not sure if I can even pull up iPhoto5 and 6 at the same time now to scroll through the libraries to see if dupes, thumbs, original/modifies/etc. are showing up to boost the count from under 25K to 79K!
Ideas? At least I know I'm not the only G5 dual user with this problem!
--Sam
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4) -
A network error occurred while trying to communicate with the server.
Hello All,
I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
In console I'm seeing these errors when I try to access various services:
2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
"<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems. -
An error occurred while trying to access the service?
I'm trying to convert a PDF into Excel but I get the message 'an error occurred while trying to access the service'.
I have tried logging into my Adobe account online and doing it within there, but once I have exported the file and pressed 'convert' it simply says 'conversion failure' with no explanation.
My subscription is still valid, so I don't see why the problems? Has anyone else had this issue and managed to fix it? I get the error message regardless of whether I'm trying to convert to Word or Excel.
Any ideas greatly appreciated!!
Thanks
SophieHi SHurcs,
I'm sorry that you're having such trouble with your ExportPDF subscription. Does this error occur for one particular file, or with any file that you try to convert? What operating system and browser are you using?
To get us started, here are a few things that you can try:
In Reader, sign out, and then sign back in.
Use a supported web browser: http://www.adobe.com/acom/systemreqs/
Clear the browser cache.
If you're using a networked computer, make sure that there are no firewall/proxy settings that prevent you from uploading files to the Internet.
Make sure that the files you're trying to convert are within the file-size limits for ExportPDF (100 MB).
If the problem persists, please let us know, and tell us a bit more about the files that you're converting.
Best,
Sara -
An error occured while trying to access the service
i'm continually having issues with trying to convert my files from PDF to excel. I keep on getting the error message "An error occured while trying to access the service" with no real explanation as to what is wrong. I've tried several times on several different computers, logging on and off, changing users...same message everytime. I have a time sensitive project to complete, and can't get it done if this conversion can't be done. HELP!
Hi J,
Here are a couple documents that may assist you:
'Getting started' guide
FAQ
Let me know if those help!
Kindest regards, Stacy -
Permissions issue: An error occurred while trying to save your photo librar
I recently upgraded from a Mac mini running OS X 10.4.10 (iPhoto 08) to an iMac Core2Duo (2.4ghz) running Leopard (and also iPhoto 08).
My iPhoto library resided on an external Firewire drive when running on the Mac mini, but now that the iMac has such a large hard disk (750gb), I wanted to move my library there. I copied the library over to the Pictures folder in my user folder on the iMac and started up iPhoto, and everything seemed fine.
When iPhoto is running for any length of time, I get the following error:
*An error occurred while trying to save your photo library.*
*Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library.*
(I have over 300gb available on the disk and my library folder is approximately 40gb.)
I've repaired the permissions on the library using iPhoto's built-in mechanism (command-option while booting iPhoto) and Disk Utility. Additionally, I've used BatchMod to give my user and group full read/write/delete permissions (as posted elsewhere in the forums), but I still get the error.
Searching the forums yields other users w/ the same issues. What's the scoop? TIA!Sean:
I just had the very same problem when I was messing with permissions and reset my unknown group to staff. I lost all write permissions in my nome folder. Here's how you can reset it for your pictures folder:
In the Terminal type in "sudo chmod -R -N " (there's a space after the N) and drag the Pictures folder into the Terminal window. Then hit the enter key. It should chug along for a couple of seconds and return a new prompt. Give iPhoto another try after that.
I had to do that for my entire home folder and it fixed the problem.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
An error occurred while trying to contact the radio tuning service
I get this error message when trying to connect to the radio stations on itunes? "an error occurred while trying to contact the radio tuning service" My computer is definitely connected to the internet as I can stream from pandora and safari and mail work? Any suggestions?
I suggest you browse this forum. This issue has been going on for at least 3 days now. It happens to some part of the time, some for all the time, not at all to others.
It's not clear what the issue is, or where it lies. If it's something to do with Apple's servers they are not likely to discuss it. There was an issue like this a few months ago with the weather widgets and people kept on posting with no news until one day it suddenly started working, again with no news. If you wish to, you can report to Apple.
http://www.apple.com/feedback/itunesapp.html
There are other applications that let you listed to online radio if you are desperate. Check www.pure-mac.com -
The error occurred while trying to load UMEServiceFrame
Hi,
Here is full error line
The error occurred while trying to load "com.sap.security.core.server.ume.service.UMEServiceFrame".
Can someone tell me what exactly is wrong. We are running Netweaver 7 ehp1. These are the rest of the lines
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:401)
at java.lang.Class.forNameImpl(Native Method)
at java.lang.Class.forName(Class.java:152)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:136)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156)
#1.5^H#AA43C515B303000F00000003000E20FA0004A70F7F225CE0#1309584906148#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_59##0#0#Error#1#/System/Server#Java###Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#java.lang.NoClassDefFoundError: com.sap.security.core.IEngineResourceHelper
Loader Info -
ClassLoader name: [common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:signature_lib;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore]
Parent loader name: [Frame ClassLoader]
References:
common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
library:ejb20
library:servlet
library:sapxmltoolkit
library:compilation_lib
interface:webservices
library:core_lib
library:com.sap.guid
library:j2eeca
library:com.sap.mw.jco
interface:security
interface:log
interface:shell
interface:keystore_api
interface:tcseccertrevoc~interface
library:com.sap.ip.basecomps
library:com.sap.util.monitor.jarm
library:opensql
library:tcbltxmanager~plb
library:tci18ncp
interface:appcontext
interface:endpoint_api
interface:resourceset_api
interface:resourcecontext_api
common:service:iiop;service:naming;service:p4;service:ts
interface:ejbcomponent
interface:container
interface:visual_administration
interface:transactionext
interface:dsr_ejbcontext_api
service:timeout
library:tc~jmx
interface:cross
service:file
service:locking
library:tcSLUTIL
service:memory
library:antlr
library:jdbdictionary
library:opensqlextensions
Resources:
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/security.class/tc_sec_saml_util.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/webservices_lib/saaj-api.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/webservices_lib/jaxrpc-api.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/basicadmin/jstartupapi.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/dbpool/sqljimpl.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/webservices_lib/jaxm-api.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/security.class/tc_sec_saml_toolkit_api.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/jmx/jmx.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/signature_lib/signature.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/jmx/jmx_sec.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/security/security.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/security.class/tc_sec_csi.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/jmx_notification/jmx_notification.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/security.class/tc_sec_saml_jaas.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/dbpool/dbpool.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/adminadapter/adminadapter.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/dbpool/opensqllib.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/connector/connectorimpl.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/security.class/tc_sec_saml_service_api.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/com.sap.security.core.tpd.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/security.class/tc_sec_saml_xmlbind.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/userstore/userstore.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/security.class/tc_sec_ssf.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/security.class/tc_sec_jaas.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/security.class/tc_sec_https.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/basicadmin/basicadmin.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/security.class/tc_sec_saml_toolkit_core.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/com.sap.security.api.sda/com.sap.security.api.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/keystore/keystore.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/security.class/tc_sec_userstore_lib.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/configuration/configuration.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/com.sap.security.api.sda/com.sap.security.api.perm.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/security.class/tc_sec_jaas_test.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/basicadmin/jstartupimpl.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/com.sap.security.core.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/deploy/deploy.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/services/com.sap.security.core.ume.service/com.sap.security.core.ume.service.jar
/usr/sap/EP2/JC00/j2ee/cluster/server0/bin/ext/security.class/tc_sec_compat.jarSolved by manually copying /usr/sap/<SID>/JCnn/j2ee/cluster/server0/bin/ext/com.sap.security.core.sda where com/sap/security/core/IEngineResourceHelper.
class can be found.
I had to perform jar -tvf to every .jar file mentioned in the trace -
An error occured while trying to copy the needed DB driver jar files
When I try to run my web app, I see this error in the Output window.
Creator will also put up a window essentially saying that I don't have a particular
data source. But I do have that very data source there.
The error seems to be pointing to this line in my build-impl.xml file
<nbdeploy debugmode="false" clientUrlPart="${client.urlPart}" forceRedeploy="${forceRedeploy}"/>I'm using postgresql-8.1-404.jdbc3.jar
I started this project with Creator2, so I don't know if the nbproject files
are out of date or anything.
Here's the output text:
init:
deps-module-jar:
deps-ear-jar:
deps-jar:
Copying 1 file to /home/tc/dev/oms/src
library-inclusion-in-archive:
library-inclusion-in-manifest:
Copying 1 file to /home/tc/dev/oms/build/web/WEB-INF/classes
load-project-properties:
installGraphics:
installLayouts:
compile:
compile-jsps:
pluto-hack-web-xml-run:
portlet-container-deploy:
jsCreatorDist:
run-deploy:
An error occured while trying to copy the needed DB driver jar files.
Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
Exception=Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:198)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:75)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:234)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:242)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
Caused by: An error occured while trying to copy the needed DB driver jar files.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:139)
... 10 more
/home/tc/dev/oms/nbproject/build-impl.xml:799: Deployment error: An error occured while trying to copy the needed DB driver jar files.. See the server log file for details.
BUILD FAILED (total time: 7 minutes 21 seconds) -
Get error when trying to upgrade to IOS5 - An error occured while trying to Back up ipad -402653138
Help
I am trying to upgrade to IOS5 and i cant get past the backup step of the upgrade - I keep getting An error occured while trying to Back up ipad (-402653138). I have tried removing my current backup and letting the update do the backup but still get same message.
I also get a warning right when I start the upgrade process that says I have purchased apps that have not been transfered and wants to know if I want to continue??? Not sure why I get this warning - I have ran the transfer purchases option several times and it seems to work. However, if I go under store and look at the purchases for my ipad it dosnt show any??? I would assume it should?
I have tried syncing and backing up, rebooting, all latest versions of itunes, etc.
Any ideas or help would be much appreciated.
Thanks
ErikI took a leap of faith and finally got the update with no issues. Here's what I did:
First did yet another backup. Next, disabled all anti-virus and anything related (running Norton 360). Next, turned off Home Sharing.
Instead of "Update" I selected "Restore". Followed prompts as though I wanted to restore and update. Selected my latest backup and off it went. First did the wipe, then ios5 update, then restarted and began to sync. Sync took about 2 hours as I have lots of apps, photos and some TV shows I forgot were on there.
In the end, I had the exact same configuration. All apps on their pages as before the update, all folders intact and even all game scores and data from apps. Hurray!
Now just going through the App update process of the many (85) that showed up in App Store icon.
Hope this helps! -
Why do I get: "An error occurred while trying to submit your post. Please try again."
Hi, I get this error: "An error occurred while trying to submit your post. Please try again." when trying to reply to a post. Just started today. How can I resolve this?
There are certain words and phrases which are banned because of spammers: if you inadvertently include one of these you usually get the message that you have included content which is not allowed.
I've had the 'an error occurred' message several times; in each case I've copied the post, clicked the 'Cancel' button, waited a few seconds than then replied again, pasting in the text, and it's worked. It appears to be juste a server glitch.
Maybe you are looking for
-
Problem with follow-up transaction from task
Hello, I have a problem with creating follow-up transaction from tasks. Here is the problem, I've defined two new transaction types Z010/Z020 with business transaction category BUS2000125 TASK and I want to be able to create follow-up transaction fro
-
I want to get the data of a table inside the Form but it is not passed
I want to get the data of a table inside the Form but it is not passed to the form by tables parameters. How can I do this. Regards
-
*** ERROR = BAD REQUEST - Reason: DpRqCheck failed (line 5195): [dpxxdisp.
Hello All, In our development system, we are able to perform all the transactions normally(SAP level) and there is no performance issues.. We have checked from OS level in work directory file dev_disp.. We are getting below error. Can you please sug
-
I had firefox but uninstalled it because of problems with add on Recipefox. Now when I try to reinstall it I get and error message "cannot open output file". I really liked firefox, How do I get it back?
-
Priveleges needed select from sys.seq$ s, sys.obj$ o, sys.user$ u
I have the following problem: I do a full import from a 9.2.0.6 db in to a 10.2.0.3 db. Some of the package bodies will not compile. One of them produces 104/5 PL/SQL: SQL Statement ignored 108/11 PL/SQL: ORA-00942: table or view does not exist That