An internal error has occurred: ?:0: attempt to index a nil value after installing LR5.5 update and trying to play or preview slideshow

An internal error has occurred: ?:0: attempt to index a nil value after installing LR5.5 update and trying to play or preview slideshow. Never had this problem before. I went to forums and see that this is a problem with previous versions and this only occurred after installing lastest update.

Jeannine,
If you follow the advice of the previous poster Julie Kmoch and then gradualy add presets back in one at a time you might be able to find the one that is causing the issue. I may be guessing, but I believe the issue has something to do with either an incompatible Preset setting (eg a older preset in newer version of LR) or a corrupt Preset.
Say you bought LR2 and imported a bunch of Presets from the internet, cuz 'Hey these effects are cool and I don't have to recreate the wheel', and then you upgraded to LR3 (not a clean install) and now one of the Presets that calls a certain slider setting or value that is different in LR3 doesn't work anymore. This might be why it throws the error, but again I am just speculating.
Location of LR Preset folder in Windows Vista/ Windows 7
C:/Users/<YourUserName>/AppData/Roaming/Adobe/Lightroom/Develop Presets
If you do not see the folder AppData, you may need to change the settings in Windows Explorer to 'Show Hidden Files and Folders'. To do that in Windows Vista/ Windows 7, open a Windows Explorer window, Click on Organize, then Foler and Search Options. Then click on the View tab and select the option button next to Show hidden files, folders and drives.
Hope this helps a bit,
Glenn

Similar Messages

An error has occurred while attempting to load the Crystal Reports runtime in deployed applications

My reports use to work but now i'm getting the following error on all reports in all the applications on my server
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.

Hi Willingtolearnja,
This forum is for TFS, I'd like to know whether you use TFS and your question is related to TFS. It would be better to let us know more details about your scenario if it's related to TFS. If not, you might need to open a new thread in the proper tech forum
that your project related for a better response.
However, from the error message, you might use the wrong configuration for x86/x64 mode. Please change the configuartion and try again. Check the links below for more information:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/82e23647-7116-424b-b437-df0cb2be083d/an-error-has-occurred-while-attempting-to-load-the-crystal-reports-runtime?forum=vscrystalreports
http://stackoverflow.com/questions/19286630/an-error-has-occured-while-attempting-to-load-the-crystal-reports-runtime
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I get this error message when I try to use or set up publish services... An internal error has occurred: ?:0: attempt to index field 'exportSettings' (a nil value)

Can anyone help with this error message when trying to use publish services? An internal error has occurred: ?:0: attempt to index field 'exportSettings' (a nil value)

Can anyone help with this error message when trying to use publish services? An internal error has occurred: ?:0: attempt to index field 'exportSettings' (a nil value)

When I try to export from LR I get an internal error message : An internal error has occurred ?:0 attempt to index a nil value

All of a sudden when I try to export images from LR to my HD...I get the following error
Unable to Export:
An internal error has occurred ?:0 atempt to index a nil value. What does this mean? How do I fix?

Hi,
Same problem here. I am trying to export files from RAW format to JPEG. I am setting the output size to 2000k. I get the error message:
Attempt to index a nil value
The behavior is a bit random. If I export a large number of photos, some will work some won't. If I retry a picture that failed, it sometimes works or keeps failing. The input images are fairly similar in sizes.
In some cases, there is no error message but the new reduced-size image is not created.
Computer:
Windows 7 Professional
Intel Core 2 Duo
4 GB of memory
Hard-drive: 1 TB, about 700 GB free.
Lightroom version 5.5
Camera Raw 8.5
This export operation was working previously (i.e., previous version of LR). I installed the 5.5 version on June 28 2014. The bug is probably in the new version of LR.
System configuration (in French)
Version de Lightroom : 5.5 [968504]
Système d'exploitation : Windows 7 Business Edition
Version : 6.1 [7600]
Architecture de l'application : x86
Architecture du système : x86
Nombre de processeurs logiques: 2
Vitesse du processeur : 2,6 Ghz
Mémoire intégrée : 3326,1 Mo
Mémoire réelle disponible pour Lightroom : 716,8 Mo
Mémoire réelle utilisée par Lightroom : 446,1 Mo (62,2%)
Mémoire virtuelle utilisée par Lightroom : 557,4 Mo
Taille de la mémoire cache : 8,1 Mo
Nombre maximal de liens utilisé par Camera Raw: 2
Paramètre PPP du système : 96 PPP
Composition sur le Bureau activée: Oui
Affichages : 1) 1680x1050
Dossier de l'application : C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.5
Chemin d'accès à la bibliothèque : K:\Images\Lightroom\Lightroom 5 Catalog.lrcat
Dossier des paramètres : C:\Users\Dominique\AppData\Roaming\Adobe\Lightroom
Modules installés:
1) Behance
2) Facebook
3) Flickr
4) Module externe de prise de vue en mode connecté Canon
5) Module externe de prise de vue en mode connecté Leica
6) Module externe de prise de vue en mode connecté Nikon
Marqueurs Config.lua: None
Adaptateur n° 1: Fournisseur : 10de
Périphérique : 402
Sous-système : 50510de
Révision : a1
Mémoire vidéo : 243
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Haut-parleurs (Périphérique High Definition Audio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: Uninitialized
CardID: 1026
Direct2DEnabled: false
GPUDevice: D3D
MaxTexture2DSize: 8192
OGLEnabled: true
Renderer: NVIDIA GeForce 8600 GT (Microsoft Corporation - WDDM v1.1)
ShaderModel: 10.0
Vendor: Nvidia
VendorID: 4318
Version: 10de:0402:50510de:00a1

Regarding Lightroom Slideshow module: When I click on the preview button I get the following error: An internal error has occurred: ?:0: attempt at index a nil value. This occurs with any group of images I select in my catalog.

Regarding Lightroom Slideshow module: When I click on the preview button I get the following error: An internal error has occurred: ?:0: attempt at index a nil value. This occurs with any group of images I select in my catalog.

Jeannine,
If you follow the advice of the previous poster Julie Kmoch and then gradualy add presets back in one at a time you might be able to find the one that is causing the issue. I may be guessing, but I believe the issue has something to do with either an incompatible Preset setting (eg a older preset in newer version of LR) or a corrupt Preset.
Say you bought LR2 and imported a bunch of Presets from the internet, cuz 'Hey these effects are cool and I don't have to recreate the wheel', and then you upgraded to LR3 (not a clean install) and now one of the Presets that calls a certain slider setting or value that is different in LR3 doesn't work anymore. This might be why it throws the error, but again I am just speculating.
Location of LR Preset folder in Windows Vista/ Windows 7
C:/Users/<YourUserName>/AppData/Roaming/Adobe/Lightroom/Develop Presets
If you do not see the folder AppData, you may need to change the settings in Windows Explorer to 'Show Hidden Files and Folders'. To do that in Windows Vista/ Windows 7, open a Windows Explorer window, Click on Organize, then Foler and Search Options. Then click on the View tab and select the option button next to Show hidden files, folders and drives.
Hope this helps a bit,
Glenn

"An internal error has occurred" message when scanning from MX922 to desktop using Windows 7

I am no longer able to scan using my MX922 connected to my desktop running Windows 7 without getting a message on my desktop saying "An internal error has occurred". I have turned the MX922 on and off, I have disconnected both the power cord and USB cable from the MX922 and from my desktop, I have reconnected the USB cable to a different port on my desktop, I have uninstalled all Canon programs from my desktop and reloaded all Canon programs with the MX922 CD, and I have restarted the desktop multiple times. I scan documents several times a week for my business. It has worked fine until today. What do I need to do to correct this problem and get back to scanning?

Hi boisseaujm,
If you temporarily disable any antivirus or firewall software that is on your computer, then attempt to scan again, are you able to scan successfully?
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Unable to export: an internal error has occurred

Hi, everybody,
Just when I was trying to convince myself that I should NOT go back to LR2, no matter how ugly the new import interface is, I tried my first export and this is all I get:
- ping
- UNABLE TO EXPORT: AN INTERNAL ERROR HAS OCCURRED ?:0 ATTEMPT TO INDEX NIL VALUE
I am using Vista up to date on a 64 bit system
Anybody else having this problem? any solutions?
Why, oh, why, did I not stick to the old efficient and working LR2, the noise reduction filter lured me into this mess

Solution - try to limit the number of files you are exporting. I came to this forum as I was running into the same problem, but I worked it out for myself. It appears the ability to export multiple files is limited, either by number or by memory. I'm running Vista with 4GB, and I was limited to around 100 files at a time. So I broke my export into a number of smaller exports of around 100 files each, and it worked.
I tried the other solutions - syncing metadata, writing metadata to files, no plugins, etc., and none of those propositions worked. The only thing that worked was limiting the scope of the export.

Prime Infrastructure 2.1 - User add failed : Some unexpected internal error has occurred.

Setting up Prime Infrastructure to manage 2504 WLC, trying to add Lobby Ambassador and I get this error message:
User add failed : Some unexpected internal error has occurred. If the problem persists please report to the Tech Support.
Technically, this is my second attempt at setting up PI. I set it up initially with the wrong version of PI and created a lobby ambassador. I followed the instructions from the forum with a similar problem that said to remove the trap receiver on the WLC from my first attempt at installing PI.
https://supportforums.cisco.com/discussion/11110686/failed-add-device-wcs-reason-common-1-some-unexpected-internal-error-has-occured
I'm now able to add a Lobby Ambassador as long as its not the same username that I created on the previous PI setup. So I suspect this Lobby Ambassador username is somewhere on the 2504 WLC, but I can't find it anywhere to remove it.

I have just been struggling with a similar issue on a fresh install of Prime 2.1 Upgraded to 2.1.1.
If I try to create the user with lobby ambassador role it just fails with "unexpected internal error".
I eventually found that by creating the user as a normal admin user first - the user is added. You can then go in a remove the admin role and change the role to lobby ambassador. This works with no internal error and the lobby admin user is working fine.
I would say it is just a bug.

Adobe Acrobat, An internal Error has Occured

As per usual with this product, when ever you need it most an extremely annoying issue happens!
All I am trying to do is open a damn .pdf and every time I attempt this, I get the same ol' issue "An Internal Error has Occured"
Seriously, I thought this may have been sorted out by the plethora of people working at Adobe by now.... But No!Even if I try to open Acrobat Pro, it does the same shite!
Ok,
So after an Adobe uninstall, Adobe system clean followed by re-install I can now get Acrobat to run but ONLY when given administrative control. I still am unable to get .pdf's to open on their own with out the 'internal error has occured' pop up! However, I am able to open Acrobat then drop the pdf into it, which then opens it!!! Kind of *******' annoying really!!!

Not sure if you've found a solution, I have not.
Not sure what else I can do aside from reformatting the drive and reinstalling the OS an load software from scratch. I've restored the system to last October, removed and reinstalled Acrobat Pro X to no avail. This problem is only affecting my install of Acrobat X Pro as all PDF files open without error in FoxIt Reader.
I'm not a systems guy, so I wouldn't have a clue about what to look at in the registry. Any suggestions?
Thanks!

Trying to print from My Image Garden; get msg "An internal error has occured

I am running from MX922. Trying to print from My Image Garden; get msg "An internal error has occurred" I have updated from the Canon website, but still it freezes up.

Hi tthaas30,
If you temporarily disable any antivirus or firewall software that is on your computer and then attempt to print again, do you still experience the same issue?
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I just installed Lightroom CC. When I try to open it, I get an error message: "An internal error has occurred. Cannot create the required folder: ..."

I just installed Lightroom CC. When I try to open it, I get an error message: "An internal error has occurred. Cannot create the required folder: ..."

Cannot create the required folder

When I try to import, I receive the following message: "An internal error has occurred: not enough memory". I always download my photos onto an external hard drive.

Yesterday,I downloaded an update for Lightroom 5. Now when I try to import, I receive the following message: "An internal error has occurred: not enough memory". The message comes up right after I click import, before I choose a file to upload.Here is the information I can think of that might be needed to answer this question:
- I always download my photos onto an external hard drive.It is about 10 % full.
- It says I have Lightroom 5.6 64 bit
- I am working from a newer laptop (Windows). The internal drive on the laptop has 289 gb and I am using 61 gb total memory.
- I have edited 2794 photos in Lightroom and it is all in one catalog.
- I did not have this problem until I made the update. I did have my first "bug" earlier this week when one of my photos had a line show up through the middle of it when I exported it. I was able to export it a second time without the line.
If there is more info. needed, let me know. I do photography as a hobby and know enough about Lightroom to edit out blemishes and adjust color balance, but not too much more, so forgive my ignorance if this is an obvious fix.
Sincerely,
Adrianne

Not Enough Memory typically refers to RAM. How much RAM do you have on your 64-bit OS computer? Do you have other programs running that may be using most of the memory?

Crystal reports 2008 sp3 : An error has occurred while attempting to load t

Hello,
Please forgive me for posting in the CR .NET forum because we are using the full Crystal Reports 2008 product and I did not see a category for it. If there is a better forum for this question, please let me know or feel free to move it.
We are having trouble deploying our crystal reports 2008 reports to a Windows Server 2008 R2 server in an aspx application...
I have been working on this issue for 4-days and cannot seem to make any progress, so I would really appreciate your help.
Our Environment:
Development Computer (32-bit, WinXP)
VS2008 (fully updated, was not installed with its Crystal Reports feature)
Crystal Reports 2008 SP3 (downloaded and installed "cr2008_sp3_fullbuild")
Database Server (64-bit)
"SERVER2" is a Microsoft SQL Server 2008 server, fully updated
Web Server (64-bit)
"SERVER3" is a Microsoft Server 2008 R2 Web server.
We have an application that is installed on the Web server and it pulls data from the database server.
The webpages are accessing the database properly. There is a ShowReport.aspx webpage that has the
CrystalReportsViewer on it. We send parameters and logon information to ShowReport.aspx. ShowReport
works properly on our development computer and the report looks good, but it fails on the web server.
We downloaded CRRuntime_12_3_mlb.msi (X86) from SAP/CR and installed it on the web server without any issues.
Our application pool on the web server for this application is set to 32-bit mode. When I launch the
application, it works properly with the database and displays data on web pages, but when I try to
view a report on ShowReport, I get the following error message:
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium) that is required.
According to everything that I have read, I have properly matched the DLLs: On the development computer, "cr2008_sp3_fullbuild" was installed; On
the web server, "CRRuntime_12_3_mlb.msi (X86)" was installed. They are both Crystal Reports 2008 and not .NET. CR.NET was not installed on our development computer, so our application was built with full Crystal Reports 2008 SP3. On our development computer, .ENGINE is 12.0.2000.0 and
the same version is on the web server.
So, I am completely at a loss as to why we are encountering this error. Help, Please!!!
Thank you in advance,
Mike

Hi Mike,
Did you set your project for X86 mode only? If not do so and rebuild and deploy your app.
Thank you
Don

An internal Error has occurred.if this persists,please contact your Discove

Hi,
I am facing Error in opening a Report in Discoverer Plus :"An internal Error has occurred.if this persists,please contact your Discoverer Manager".I am opening all the other reports its opening up but only this one causing up this pop up error.
Kindly help me as its very urgent.
Any help will be needful for me
Thanks and Regards

Have you installed AppController on the same machine with VMM?

'Abnormal program termination.An internal error has occured.'

Hi all... i have a problem when i'm in the middle of infra installation (74%) and then this popup message appears and stop my installation 'Abnormal program termination. An internal error has occured. Pls provide the following files to Oracle support:
"/oraias/oraInventory/logs/installActions2010-08-18_11-03-52AM.log"
"/oraias/oraInventory/logs/installActions2010-08-18_11-03-52AM.err"
"/oraias/oraInventory/logs/installActions2010-08-18_11-03-52AM.out"
i have tried several ways and many times to reinstall, to solve this error but still the result is still failed. i've tried to follow metalink suggestion by Edit the PATH, CLASSPATH, and LD_LIBRARY_PATH environment variables so that they do not reference any Oracle home directories, try to transfer again the software installation to directory server and extract from cpio files(i thought maybe the software might be corrupted) but the result is still same, stuck at the same place..! if any of you have experienced this before or have any idea on which setup do i have to look again, pls reply me ya. pls help and your help is very much appreciated.thanks in advanced.

Hi, welcome to the forums!
Have you already added the new node to Clusterware?. Have you followed all the steps detailed on the documentation?
The note *How to Add Node/Instance or Remove Node/Instance in 10gR2, 11gR1 and 11gR2 Oracle Clusterware and RAC [ID 1332451.1]* is a must read, which points to the public documentation.
If you already did that previous steps, you can enable a more detailed logging for the addnode execution with the parameters "-debug -logLevel finest", and setting this variables before running it again:
export SRVM_TRACE=true
export SRVM_TACE_LEVEL=2Regards.

An internal error has occurred: ?:0: attempt to index a nil value after installing LR5.5 update and trying to play or preview slideshow

Similar Messages

Maybe you are looking for