An MIC is accept and reject at the same during result recording

Hi,
If I have a checked sign on both of the Acceptance checkbox and Rejection checkbox (status:2, and valuation: yellow thunder sign icon) during QE51N, what does it mean in term of result recording, defect, and notification, and usage decision?
I am stuck as I don't know how to treat this MIC.
thanks
YY

Hi Herment,
There is no such message you mention and the system allow me to save with status 2. However, the valuation field display a Yellow Lightning icon.
Now that I press the lock button (i.e. close) and clicked the save button, the system does not allow me to make any changes to this MIC, and which means there are two check sign on the Accept and Reject checkboxes now.
How to deal with it?
Thanks
YY

Similar Messages

  • Different stock value for accepted and rejected material in quality

    Hi,
    when we send the final product in quality ,some material has accepted and some material has rejected
    But system is showing the value of both accepted and rejected same.
    But we want that the value for both should be different.
    How we can get it
    Regards
    Prem

    It is not possible to valuate differently for accepted and rejected material.
    The value for material in PO for total material. So it should be same value for both.
    Regards
    Ravi

  • Please help me find out my code..I am using msg ACCept and Reject

    Please anyone help me...
    I am using MSG ACCEPT and REJECT...
    but my code when I execute it...it keep show out MSG REJECT...
    Please help me...Thanks a lot....
    public class Addmission
    public static void main(String[] args) throws Exception
    char Message;
    double GPA = 3.0;
    int ATS = 60;
    int ATScore = 80;
    System.out.println("Enter your Grade Point Average");
    GPA = (char)System.in.read();
    System.out.println("Enter your Addmission Test Score");
    ATS =(char)System.in.read();
    System.in.read(); System.in.read();
         if(GPA >= 3.0 && ATS == 60)
    System.out.println("Accept");
    if(GPA <= 3.0 && ATScore == 80)
    System.out.println("Accept");
    else
    System.out.println("Reject");

    I need to do like... but my code doens't show msg "Accept" it keep going to show "REJECT"
    Could anyone help me out?
    Print the msg "Accept" if the student has any of the following:
    * A grade point average of 3.0 or above and admission test score of at least 60
    * A grade point average of below 3.0 and an admission test score of at least 80.If the student doesn't meet either of the qualification criteria, print "Reject"
    public class Addmission
    public static void main(String[] args) throws Exception
    char Message;
    double GPA = 3.0;
    int ATS = 60;
    int ATScore = 80;
    System.out.println("Enter your Grade Point Average");
    GPA = (char)System.in.read();
    System.out.println("Enter your Addmission Test Score");
    ATS =(char)System.in.read();
    System.in.read(); System.in.read();
    if(GPA >= 3.0 && ATS == 60)
    System.out.println("Accept");
    if(GPA <= 3.0 && ATScore == 80)
    System.out.println("Accept");
    else
    System.out.println("Reject");

  • My SB Audigy 2 card can't use headset and musicamplifier at the same time

    Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
    The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
    In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
    I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
    But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
    Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
    please help, thx.
    Michael

    If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
    Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
    Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    Another option:
    Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
    --> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
    = You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
    .jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

  • Wi-fi connection on HP Deskjet 2540 and network at the same time?

    Hello
    Please can you tell me how to keep my connection to my wi-fi printer whilst connected to my Virgin Media Broadband? Every time I want to print I have to switch off the Virgin network connection and connect to the HP Deskjet Wi-fi, and then switch it back again to Virgin to browse or send emails.
    Thank you for your help
    AC33 

    Hey there @AC33 Welcome back
    I understand you are looking to install your printer on your network, so you can use the internet and printer at the same time. By the sounds of it, you may be connecting the printer currently, using the Wireless Direct feature, which will only allow you to connect to the printer or the network at a time. Basically, the printer is acting like a network.
    Here is a link for you to check out. It will help you install the printer on your network:
    Setting Up the Printer for a Wireless network for the HP Deskjet 2540 and HP Deskjet Ink Advantage 2...
    I hope this helps you, let me know the outcome
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • My iPod generation 6 160gb will not sync. iTunes says corrupt, won't restore just errors out and then loops the same messages.

    My iPod is corrupt according to iTunes, however it won't restore through iTunes either.  I've tried to reformat the drive.  Makes no difference.  I've tried to reformat after choosing disk manager, and again the same result.  The iPod takes forever to work through the reformatting process and I get the same message "Itunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod" and then my pc tells me to format the disk.
    It's so frustrating, is there a fix to this? It seems like the iPod could still function, but I'm missing the way to get out of this loop, please help me!

    Likely a hard drive fault, see the note that i wrote few years ago, hopefully it helps
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Headphones and Speakers at the same time on ZS 2

    Hiya
    I have the Audigy 2 ZS sound card.
    I have a set of normal speakers with the one connector and a set of headphones that has 2 connectors, one for the mic and one for the headphone speakers. This is also a USB set so i have that option aswell.
    Now i know i can put the headphones in the front panel but i dont really want to do this as my pc would mean have the fron panel open.
    My question is, how am i able to use both the headphones and speakers at the same time. At this moment if i plug the USB headphones in they take over and no sound comes out of the speakers.
    I would like both if poss
    Thx
    Paul

    You can get a stereo splitter adapter/cable and with it, you can have the headphone and speaker connect to the same output jack from the soundcard.
    Jason

  • The ff default theme keeps re-enabling itself after computer restart even though I enable littlefox and restart firefox, and it does the same on more than one computer. I want littlefox to start with firefox, not have to enable every time.

    I want littlefox to start with firefox, not have to enable every time the computer starts.

    @kalos
    Uninstalled everything PA, also uninstalled mangler which was the only thing that depended on PA. It didn't work anyway.
    No pulseaudio --kill command so I couldn't run.
    Checked systemd journal and there is no mention of PA this time.
    Checked top, and grepped ps aux and there is no PA there either.
    I also rebooted the machine completely just to make sure. However VLC and HTML5 have the same incompatibilities.
    _ vlc Videos/anime/fmab/01.mp4
    VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
    [0x1bc30f8] pulse audio output error: PulseAudio server connection failure: Connection refused
    [0x1af4118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    [0x7fb604001248] main vout display error: Failed to resize display
    But the video and audio did work until I ran some HTML5 video, after which the audio worked, and then I opened it again and it didn't work...
    @nomorewindows
    I see. That's too bad. At least we're not alone.
    Last edited by Greduan (2014-11-14 01:34:29)

  • WiFi x551 printnig from iphone and PC At the same time

    Hello all!
    HP Officejet Pro X551dw Printer (CV037A)
    if i connect printer to WIFI - 192.168.60.0 255.255.255.0 network
    and iphone connect this is wifi too
    then i connect to LAN my PC - 192.168.61.0 255.255.255.0 network
    Printer and PC can reached each other ( ping work \ routing )
    i can connect printer as network printer for my PC?
    Need printing FROM PC and IPHONE AT THE SAME TIME!!!!
    how i can achieve this

    Hi @Liks,
    To get your issue more exposure I would suggest posting it in the commercial forums since the Officejet Pro X551 Printer is a commercial product. You can do this at http://h30499.www3.hp.com/t5/Multifunction-and-All​-in-One/bd-p/bsc-420#.VCWbZoXEb8c.
    The support page for your product may be helpful in the meantime: http://ow.ly/BZrCb
    I hope this helps!
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Can I use HP Pro 8600 with usb and wireless at the same time

    Can I use HP Pro 8600 with usb and wireless at the same time?  Sometimes I cannot get the wireless to work, it seems to be my laptop.  It would be nice if I could use the usb, but it doesn't work.  What should / can I do, if anything?
    Sam

    Hi,
    Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Currently have ipod touch 4 and am getting an iphone 5c. Want to transfer data to new phone. Currently all our family devices on one apple ID for purchases and it is the same for icloud. I want to create a new one for icloud for this iphone. What do I do?

    Currently have ipod touch 4 and am getting iphone 5c this weekend. Currently our family has several apple devices and they have the same apple ID for itunes and it is the same ID that we use for icloud. I want to set up a separate icloud ID so that it is only on my new device. I still want to keep the same apple ID for purchases. Can I do this and better yet when do I do this...before the purchase, after the purchase and backing up of data. Where do I go to create a new one?

    Figured it out. Thanks.

  • My wife and I share the same iTunes account.  How can I setup a separate account for her iPhone using my iMac?

    My wife and I share the same iTunes account. How do I setup a separate account for her? Can I do it using my iMac?
    Thanks

    Using More than One iDevice on the Same Computer
    This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
    On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
    Start by transferring the new device(s) to a new account along with all your data.  Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
    If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
    Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted.  Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
    Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
    Note: The essence of the above was created by user, randers4. I
    have made substantial changes to improve readability and syntax.

  • Have synced my iPhone numerous times and some of the memos in "Voice Memos" on my iPhone wont go over to my iTunes program on my computer. I have a folder titled "Voice Memos" on my iPhone and one of the same name on iTunes on my computer.

    I have synced my iPhone numerous times and some of the memos in "Voice Memos" on my iPhone wont go over to my iTunes program on my computer. I have a folder titled "Voice Memos" on my iPhone and one of the same name on iTunes on my computer. But after I sync I only get 6 out of the 9 voice memos on my iPhone.
    How do I get the rest (or all) of the memos from my iPhone copied to my computer?
    Albro P Michell
    [email protected]

    "I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
    Correct.  it does not magially appear in other places.  It will only be where you put it.
    "I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where  I sync everything. "
    Correct as well.  Iphone will sync with one computer at a time.  Syncing to another will erase the current content.
    You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

  • My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

    OK great info!
    I found 2 possible ethernet to USB adapters:
    By "Plugable":  USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
    2. Apple USB Ethernet Adapter
    Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance.  BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
    One person commented: 
    This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
    Thanks for any additional comments.
    Best regards,
    Steve Schulte
    Sunday 6 January 2013

  • I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
    Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

Maybe you are looking for