An unexpected error occurred while the job was running. (ID: 104)

I'm getting this error in the event logs when trying to run a consistency check / sync with one of our file servers.
This server was working fine, but w needed to migrate the data to a new partition (GPT) to allow it to expand past the 2TB limit of MBR partitions. I added a new 3TB disk migrated the data and changed the drive letter to what the old partition was
prior. Since then we seem to get this error.
I have installed the update roll up on both the server and the agent side. I have also removed the server from the protection group then re-added it. I've also removed and reinstalled the agent on the file server.
Any help is appreciated! Here's the full error from the DPM server:
The replica of E:\ on server is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. (ID: 3106)
An unexpected error occurred while the job was running. (ID: 104)

Server Version is Windows 2012 R2 STD. DPM is 4.2.1235.0 (DPM 2012 R2). I expanded the production file server. All that server does is host up file shares.
I suspected the fact that I created a new volume and changed drive letter back to the original to be the source cause of the issue. What I ended up doing is blowing away the backups from this server on disk and re-adding it to the protection group.
It now runs much longer, but still times out at random with the error mentioned above.
Vijay: The error was copied from Event Viewer. Not sure what else you require? Event ID is 3106 from DPM-EM.
The DPM logs say:
Affected area: E:\
Occurred since: 2015-01-05 2:04:38 AM
Description: The replica of Volume E:\ on servername is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing recovery
points, but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
An unexpected error occurred while the job was running. (ID 104 Details: The semaphore timeout period has expired (0x80070079))
Date inactivated: 2015-01-05 7:03:04 AM
Recommended action: No action is required because this alert is inactive.
Affected area: E:\
Occurred since: 2015-01-05 2:04:38 AM
Description: The replica of Volume E:\ on servername is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing
recovery points, but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
An unexpected error occurred while the job was running. (ID 104 Details: The semaphore timeout period has expired (0x80070079))

Similar Messages

An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))

We are using DPM Version: 4.1.3465.0 with System Center 2012 Service Pack 1 to back up VMs in our Hyper V Cluster. We have a total of 37 VMs with a combination of 2008r2 servers and 2012 servers. One of our 2012 servers will not backup, and we consistently
get the message "An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))". I have seen this error message when I Googled it, but cannot get past it. I have deleted the Protection Group and
data and tried to re-create, but get the same errors. I also thought the the server might be mis-reporting the data size, but I expanded that to cover the replication data. I have also tried to perform consistancy checks multiple times with no luck. I have
not seen a difinitive answer from my Google searches, so was hopeful someone has seen this also, and have had success in resolving. Currently this server has no backup recovery points, so I am worried if it does crash. I think I have the rollups installed
as well.

Hi Kelly,
does the issue still persists?

An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057)) After DPM 2012 SP1 to R2 Upgrade

Hi,
We have upgraded DPM 2012 SP1 to DPM 2012 R2 and OS is Windows 2012 standard.
Now in File Protection Group, we receive error
"An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))".
This happens to only one Drive(X: Drive) of the PG server, other drive(Z: Drive) backup is working fine.
We tried,
Deleted entire protection group and recreated ,
Ran consistency job 2 to 3 times.
Ran Synchronize with consistency check.
But every time It failed. Before upgrade it was working fine.
Thanks

Hi
I would suggest opening a new case with MS to allow the DPM team to further look into the issue. Also the DPM 2012 R2 RollUp which addresses the (0x80070057)
issue is Rollup 1 and the private will not be needed after applying Rollup 1. The Roll up is found here
http://support.microsoft.com/kb/2904687/en-us
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your
question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

A conversion error occurred while the program -- display data on the screen

HI all,
Iam getting a dump error described below:
A conversion error occurred while the program was trying to
display data on the screen.
The ABAP output field and the screen field may not have the
same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. When attempting to
display the date on the screen, an error will occur that triggers the
error message.
              Screen name.............. " Ztable_MM_MRQ "
              Screen number............ 0100
              Screen field............. "WA_PO_ITEMS-MENGE"
              Error text............... "FX015: Sign lost."
Further data:
Give us step by step procedure to rectify the same with T.codes
Thanks
Regards
Siraj

Raymond
please give details in se51 where i have to put a "V" to allow negative amounts
whether it is in Text or I/O templates
name                                     type of screen element         Text or I/O field
WA_PO_ITEMS-MENGE     Text                           PO_quantity__
regards

Error RCIRAS0546, failure occured while the report was being processed

Hello all,
We use Crystal Reports 2008 V1 server on Linux. With 2 reports now we get the error when viewing the report from the Central Management Console (CMC)
"Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator. [RCIRAS0546]"
In de /var/log/messages, I get messages like these:
Sep 28 17:37:30 vsrv01 boe_crprocd[25630]: A failure occurred while the server was processing report file 2:11154 (RCIRAS0568)
Sep 28 17:37:40 vsrv01 boe_crprocd[25630]: A failure occurred while the server was processing report '10. LEN Rapportage per scenario (kapitaallasten, investeringen, algemene gegevens) (V1)' (id=11154) for user 12 (RCIRAS0567)
I tried several parameters on the CrystalReportsProcessingServer, like increasing/decreasing the Maximum Current Jobs and Number of Prestarted Children. None of these make a difference. Als the error occurred when viewing the report as Administrator.
The reports has a dynamic parameter, wtih content coming from the database (drop-down list). When selecting one value the report is viewing fine. With a selection of more values the error occurred. In Crystal Reports 2008 there is no problem.
I restarted the CRProcessingServer with -trace. In the trace I see the following lines:
It seems that several subprocesses start for retrieving data based on the parameter values.
After the crash of the first child, the above mentioned error occurs.
2010/09/28 15:37:23.075|==| | |25630|1474829200| |||||||||||||||(ProcWorkerManager.cpp:82) PageChildDesc constructor (id=3)
2010/09/28 15:37:23.075|==| | |25630|1474829200| |||||||||||||||(ProcWorkerManager.cpp:5489) doCreateChild() created a new child 3
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6814) cleanupChildren() starting
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||[ProcWorkerManager.cpp : 6854] RAS-CORE-METRICS (before cleanup) number of child processes = 3
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6979) child id=1 crashed
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6994) cleanupChildren() removing child id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:101) PageChildDesc destructor (id=1)
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:7028) cleanupChildren() marking as stopped: worker id=1 in child id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorker.cpp:2703) stopping worker id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:7168) cleanupChildren() ending
Does someone know this problem and what to do about this?
With kind regards,
Pim van Stam
SvSnet

We got this error message on a report that had 5 subreports, 3 of which were based on stored procedures. The report was running fine in our Dev environment and in the CR developer, but not when we published it to another environment. The problem was caused because the stored procedures had been changed in Dev (so that they ran correctly) but these changes had not been released to the other environment. Once the scripts were run to update the stored procedures the report ran successfully. So it apepars that the problem was because the stored procedure/s the subreports were using were failing, but we only got the RCIRAS0546 error message.

An unexpected error occurred while configuring the Network Bridge

Windows XP Pro SP2, a new TP61 6460 6WG, all Win updates, all Lenovo updates.
Everything works fine except... when I'm trying to create a network bridge I always get the following: An unexpected error occurred while configuring the Network Bridge.
This is not the situation described in Microsoft's Knowledge Base KB309640 (http://support.microsoft.com/kb/309640/en-us). I have no ICS, no ICF.
Any ideas?

I had the same problem and was really frustrated. I was about to pull my hairs out but then i was finally able to solve it. The solution is deleting some files of WMI repository. The complete details can be found on my blog http://cheatppc.blogspot.com/2008/07/unexpected-error-has-occured-while.html
Hope this solves the problem.

INS-08106: Unexpected error occurred while loading the 'InventoryUI'

Hello.
Have done alot of installs over time, but this error has me stymied. Here are the givens:
2-node Linux RHEL 5 OS
Will ASM over fiber (using ASMLib)
Attempting to install Oracle 11gR2 (11.2.0.3.0)
SSH is working and runcluvfy gives no errors on wither nodes.
When running through the installer, I am on the "specify Installation Location" menu.
I input Oracle Base: /apps/oracle
I input Software Location: /apps/grid/product/11.2.0/grid_1
I hit NEXT and afeter a short time, I get the following error:
INS-08106: Unexpected error occurred while loading the view 'InventoryUI' associated to state 'inventory.'
No further details are given.
I look in the install log for this run and see these last final lines (no errors appear in this log prior):
INFO: Gathering system details
INFO: Checking specified location on remote nodes... (btw - specified path DO exist w/correct perms/ownership)
INFO: size stimation for Completeinstall is 5632.0
INFO: Completed validating state <CRSInstallLocationUI>
INFO: Verifying route INVENTORY_ABSENT
INFO: Get view names [InventoryUI]
INFO: View for [InventoryUI] is oracle.install.ivw.common.view.InventroyUI@58046530
INFO: Initializing view [InventoryUI> at state <inventory>
INFO: Fetching existing UNIX groups
INFO: Terminating all background processes
INFO: Terminated all background procecces
SEVERE: [FATAL] [INS-08016] Unexpected error occurred while loading the view 'InventoryUI' associated to state 'inventory.'
CAUSE: No additional information available.
ACTION: Contact Oracle Support Services or refer to the software manual..
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:1032
INFO: Advice is ABORT
INFO: Adding ExitStatus FAILURE to the exist status set
INFO: Finding the most appropriate exist status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Grid Infrastructure
INFO: Unloading Setup Driver
I realize I can open an SR in MOS, but was hping that maybe someone in this forum had encountered this error previosly and might have some sugestions or a solution that worked for them. The only same error code in MOS relates to to:
Unexptected error occurred while loading the view 'GridPlugPlayInfoUI' associated to state 'GridPlugPlayInfoUI', but this has a fix in /etc/hosts, but is NOT the same error I am getting.
Thank you in advance for any help.
Matt

/etc/hosts file was ok as-is.
Here was the underlying problem that has now been fixed:
We had three user goups associated with user Oracle. They were oinstall, dba, and oper
In /etc/groups, "oper" was not present. During the install, but prior to the actual pressing of the "Install" button, check(s) are made between the groups tied to the installer user and what groups are associated with the same user in /etc/groups. Once "oper" was added to the /etc/groups file, the error disappeared and the install proceeded.
Problem solved. Thanks for any earlier inputs.
Matt

Error: Your request could not be completed because a failure occurred while the report was being processed.

Post Author: sagimann
CA Forum: Deployment
Hello,
I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
My env is:
Solaris 10 64 bit
Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
Important bouser env:
ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
TNS_ADMIN=$ORACLE_HOME/network/admin
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
I reboot the box, then start BO like so:
cd /opt/reporting/bobje
. setup/env.sh
./mysqlstartup.sh
./startservers
./tomcatstartup
Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
Error:
Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
May 5 15:23:23 testbox1 boe_pagesd[3865]: [ID 253862 user.error] A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
pls advise,
thank you.

The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
The explanation, from a comment in the above linked blog post:
"To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
Edited by: abirdman on Feb 3, 2012 9:49 PM

Exchange Office Web Apps Preview Does not work in OWA. An error occurred while the document preview was being created

Hi,
I have managed to configure intergration between Office Web App server 2013 and Exchange 2013 OWA.
I have created a test users Test1 and Test 2. I have given full access on Test2 mailbox to user test 1.
When I login to owa for user test1 and preview the attachment it works fine.
However when I use "Open another mailbox" in OWA and open test2 mailbox and try to preview the attachments in test2 inbox it errors as
" An error occurred while the document preview was being created. Please try again later " as follows
I am new to office web apps server 2013 and implemented it first time. Can anyone suggest resolutions or troubleshooting ?

Hi,
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Does the error appear when you directly access test 2 mailbox through OWA?
2. Check if there is 141 error in your event log.
3. Check whether Office web app server connects with Exchange server when the issue happens.
Access the URL: https://hostname/hosting/discovery
4. Grant full access permission again and check the result.
For more information about Office web app integration with Exchange, please refer to the following article:
http://www.msexchange.org/articles-tutorials/exchange-server-2013/management-administration/exchange-2013-office-web-apps-server-integration.html
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

INS-08106] Unexpected error occurred while loading the view 'GridPlugPlayInfoUI'

Hi
I got the below error message while installing the Oracle 11g R2 Database Grid software on Oracle Linux 6.4 OS using vnc viewer.
"INS-08106] Unexpected error occurred while loading the view 'GridPlugPlayInfoUI' associated to state 'GridPlugPlayInfoUI'."
Please let me know how to overcome this error and proceed with the installation.
Contents of the error log file:
java.lang.NullPointerException
at oracle.sysman.oii.oiin.OiinNetOps.addNICInfo(OiinNetOps.java:144)
at oracle.sysman.oii.oiin.OiinNetOps.computeNICList(OiinNetOps.java:109)
at oracle.sysman.oii.oiin.OiinNetOps.<init>(OiinNetOps.java:76)
at oracle.sysman.oii.oiin.OiinNetOps.getNetOps(OiinNetOps.java:90)
at oracle.sysman.oii.oiix.OiixNetOps.getFullHostName(OiixNetOps.java:49)
at oracle.install.library.util.MachineInfo.getFullHostName(MachineInfo.java:109)
at oracle.install.library.db.RAC92Info.is92RACPresent(RAC92Info.java:115)
at oracle.install.ivw.crs.view.InstallTypeGUI.onEvent(InstallTypeGUI.java:120)
at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:508)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor.access$001(AbstractGraphicalFlowExecutor.java:39)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:99)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:98)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
---# Begin Stacktrace #---------------------------
ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:458
oracle.install.commons.flow.FlowException: [INS-08106] Unexpected error occurred while loading the view 'GridPlugPlayInfoUI' associated to state 'GridPlugPlayInfoUI'.
at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:510)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor.access$001(AbstractGraphicalFlowExecutor.java:39)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:99)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:98)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: java.lang.NullPointerException
at oracle.install.library.crs.CRSInfo.getDefaultIPAddressForGNSVIP(CRSInfo.java:584)
at oracle.install.ivw.crs.view.GridPlugPlayInfoUI.onEvent(GridPlugPlayInfoUI.java:373)
at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:508)
... 12 more
---# End Stacktrace #-----------------------------

Hello,
It's a Bug.
Try selecting all languages and give a try ...
Bug 9632373: UNEXPECTED ERROR OCCURRED WHILE LOADING THE VIEW 'GRIDPLUGPLAYINFOUI'
<Moderator Edit - deleted MOS Doc content - pl do not post such content - it is a violation of your Support agreement>
Thank you

Upgrading to osx 10.6.8 fails. I see errors in the /var/log/install.log of "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn't be completed. Input/out

upgrading to osx 10.6.8 fails. I see errors in the /var/log/install.log of "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn’t be completed. Input/out. Any thoughts on what is causing these errors and the upgrade failure?
Thanks

I have no idea what the specific error code means but input/output errors can sometimes mean a disk is failing. Make a couple of backups of all important data before doing anything else.
Verify your startup disk using the First Aid tab in Disk Utility. If the disk needs repair boot from your Leopard DVD and repair your disk from Disk Utility under Utilities on the screen after you choose your language. Repeat the repair process until Disk Utility reports all is well.
If Disk Utility doesn't find any errors you might want to try a new download of the update and keep a sharp eye on your HD for anything else that might indicate all is not well. Take special care to back up important data.
If Disk Utility finds errors it would probably be a good idea to pay a visit to the Apple Store to have them check out your hard drive even if Disk Utility is able to repair the errors.

UnExpected error occured while creating ejb container

Hey, I am trying to deploy a new bean that I just wrote with a bean that has already been written. My bean is the News bean, the existing bean is the PPSO bean.
when I deploy, I get the following exception:
[26/Feb/2004:11:22:42] SEVERE ( 2104): LDR5004: UnExpected error occured while creating ejb container
java.lang.ClassNotFoundException: com.pragmatics.ppcig.model.ejb.NewsBean_LocalHomeImpl
     at com.iplanet.ias.loader.EJBClassLoader.findClass(EJBClassLoader.java:457)
     at com.iplanet.ias.loader.EJBClassLoader.loadClass(EJBClassLoader.java:585)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
     at com.sun.ejb.containers.BaseContainer.initializeHome(BaseContainer.java:426)
     at com.sun.ejb.containers.EntityContainer.initializeHome(EntityContainer.java:355)
     at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(ContainerFactoryImpl.java:230)
     at com.iplanet.ias.server.AbstractLoader.loadEjbs(AbstractLoader.java:345)
     at com.iplanet.ias.server.ApplicationLoader.load(ApplicationLoader.java:81)
     at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:134)
     at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:110)
     at com.iplanet.ias.server.ApplicationManager.applicationDeployed(ApplicationManager.java:294)
     at com.iplanet.ias.admin.event.AdminEventMulticaster.invokeApplicationDeployEventListener(AdminEventMulticaster.java:424)
     at com.iplanet.ias.admin.event.AdminEventMulticaster.handleApplicationDeployEvent(AdminEventMulticaster.java:408)
     at com.iplanet.ias.admin.event.AdminEventMulticaster.processEvent(AdminEventMulticaster.java:291)
     at com.iplanet.ias.admin.event.AdminEventMulticaster.multicastEvent(AdminEventMulticaster.java:99)
     at com.iplanet.ias.admin.server.core.channel.AdminChannelServer.sendNotification(AdminChannelServer.java:84)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:261)
     at sun.rmi.transport.Transport$1.run(Transport.java:148)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
     at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
     at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
     at java.lang.Thread.run(Thread.java:534)
here are pieces of my deployment descriptor:
<entity>
          <description>PPSO EJB</description>
          <display-name>PPSO EJB</display-name>
          <ejb-name>PPSO</ejb-name>
          <local-home>com.pragmatics.ppcig.model.ejb.PPSOLocalHome</local-home>
          <local>com.pragmatics.ppcig.model.ejb.PPSOLocal</local>
          <ejb-class>com.pragmatics.ppcig.model.ejb.PPSOBean</ejb-class>
          <persistence-type>Bean</persistence-type>
          <prim-key-class>java.lang.String</prim-key-class>
          <reentrant>False</reentrant>
          <env-entry>
// - select statements here that don't apply - //
</entity>
     <entity>
          <description>News EJB</description>
          <display-name>News EJB</display-name>
          <ejb-name>News</ejb-name>
          <local-home>com.pragmatics.ppcig.model.ejb.NewsLocalHome</local-home>
          <local>com.pragmatics.ppcig.model.ejb.NewsLocal</local>
          <ejb-class>com.pragmatics.ppcig.model.ejb.NewsBean</ejb-class>
          <persistence-type>Bean</persistence-type>
          <prim-key-class>java.lang.String</prim-key-class>
          <reentrant>False</reentrant>
          <resource-ref>
               <res-ref-name>jdbc/ppcigDS</res-ref-name>
               <res-type>javax.sql.DataSource</res-type>
               <res-auth>Container</res-auth>
               <res-sharing-scope>Shareable</res-sharing-scope>
          </resource-ref>
     </entity>
Any ideas what is causing this error?
Thanks!

Hi shanu, thanks for your reply,
Yes I configured the JMS Objects in my AS before deploying the MDB.
I set
- a Queue: RFIDLocatorQueue
- a connection Factory: RFIDLocatorConnectionFactory
- and a Physical destination for my logical queue called: RFIDLocatorPhysicalQueue
The latter was linked to the RFIDLocatorQueue by putting RFIDLocatorPhysicalQueue in the name parameter of the RFIDLocatorQueue.
Is there maybe something else I forgot to configure ?
thanks a lot

Ins-08109 unexpected error occurred while validating inputs at state 'quick install'

Dear All,
I successfully configure clusterware for 2 node rac db. But when i try to install Oracle DB Software i am getting below error on 4 step .
ins-08109 unexpected error occurred while validating inputs at state 'quick install'.
Kindly advice over the same.
Thanks in advance.

Thanks John for your update,
Actually whenever i ask a question on OTN and Sybrand replied over the same every time instead of giving solution or advice he always try to insult other. I know that he is very senior to me and i am here posting query not to waste important time of anyone but to get the solution. Yes i forgot to update the i goggled and applied the recommendation before posting my query here. But this is not the correct way to advice anyone. Infact he also cross out this level where i am. If you think i hurt sentiments of anyone i feel sorry for that. But this is not the right way to advice in fact you all are seniors and we are coming here to learn from you guy's. OTN is not private property of anyone.
One thing more to say like you advice me calmly it's better to understand me how to do things accordingly now i will do that. Thanks again for your help and i will take care of all these things in future.
Actually the problem mentioned above i faced first time and after google i didn't get any blog or site with the same mentioned error instead it will give me link mentioned below:-
[Ins-08109] Unexpected Error Occurred 'Installoptionsui'.
But mine was
[ins-08109] unexpected error occurred while validating inputs at state 'quick install''
I tried one of the blog that states that similar problem occurs when clusterware is not up. First i check whether clusterware is up or not i found that it is up. But still i restarted it and try the installation again but getting the similar problem again.
In one blog it is mentioned that due to listener misconfiguration the problem occurs. I crosschecked listeners are configured from grid home.
So applied both the sol which i get by typing the same error which i mentioned above but not successful to get the solution.
In some website it is suggested that try to contact Oracle Support for the same.
Ok the problem is sorted out,I do a fresh installation of OS, Clusterware and DB, now i am not facing the same problem. I think the problem is related to group permission. Now this time i mention all the details what i do and what is the result i think now its better to understand.

"An unexpected error occurred while creating a custom installer."

All;
I—and I've seen several others in older posts—have been reported received the error "An unexpected error occurred while creating a custom installer" while attampting to build a customer ARD client installer. My guess is that this is do to a issue related to 10.8.X (10.8.4, in my case) based console Mac but I cannot confirm this. I have verified that there are no outstanding OS, client or application updates or hot fixes, as well.
Has anyone built an successful installer from Mountain Lion-installed Mac? Is there any know workarounds?
Thanks in advance, for any help.

Have the exact same problem.
iMac running 10.8.4
Got through the steps of creating a custom client installer.
if I choose not to customize and just save an installer I don't get the error but it creates a file of Zero bytes in size.
If I chose to configure, when I try to save I get:
An unexpected error occurred while creating a custom installer. Please try again....
Console log reports:
9/1/13 12:32:29.603 AM Remote Desktop[1306]: open on /private/tmp/RemoteDesktopClientInstaller_HEATyAJ5CR/extracted/RemoteDesktopCli ent.pkg/Scripts/RemoteDesktopClient.pkg: No such file or directory
I have tried to save this in several location, with no effect on the error or the information logged, with the exception of the name of the temp directory that DOES contains the file (zero bytes):
RemoteDesktopClient.pkg
Need help with this someone...!
APPLE...I JUST purchase this Applciation for $80.....it just flat out does not work....

A failure occurred while the server was processing report file

Hi All,
I keep getting this error while opening the report in Infoview, "A failure occurred while the server was processing report file".
I checked Event viewer there i have lot of errors with the same message and the source is "BusinessObject_crproc".
Please advise me what i have to do to resolve the issue.
Environment: BOXI3.1, CR2008, Windows Server 2003
Thanks
Sudharsan.

We got this error message on a report that had 5 subreports, 3 of which were based on stored procedures. The report was running fine in our Dev environment and in the CR developer, but not when we published it to another environment. The problem was caused because the stored procedures had been changed in Dev (so that they ran correctly) but these changes had not been released to the other environment. Once the scripts were run to update the stored procedures the report ran successfully. So it apepars that the problem was because the stored procedure/s the subreports were using were failing, but we only got the RCIRAS0546 error message.

An unexpected error occurred while the job was running. (ID: 104)

Similar Messages

Maybe you are looking for