Analogue input for 30 inch Cinema Display?

Hi there,
I'm looking at getting a 30 inch Cinema Display and just wondered if there was a way to connect analogue sources (such as an xbox 360 for example) to the display. I guess what would be needed is a female DVI -> female AUX adaptor but I'm not sure if such a thing exists or if it would work the way I think?
If not, do you have any recommendations for good 30 inch displays that do have analogue inputs?
Thanks very much
Sam

The Apple display requires digital input. Dell has a 30" with analog and digital inputs
<http://accessories.us.dell.com/sna/products/Monitors/productdetail.aspx?c=us&l= en&s=bsd&cs=04&sku=223-4890>

Similar Messages

  • Help I need a "power brick" for my 30-inch cinema display!!!!!

    I recently moved and lost my "power suppy brick" for my 30-inch cinema display..How do I get another one?? The Applestore wanted my old one to do a even exchange?? But I can't do that...And they don't sell the product as a replacement. I'm stuck with a 2 month old display I can't even use! Any ideas???
    Sony Vaio   Windows XP  

    If the display is covered by AppleCare call 1(800)275-2273 and ask for a replacement power adapter. They will send the new unit first, and you are supposed to return the bad unit. You give them a credit card number when you order the part, so they can charge you, if for some reason they don't receive the old part.

  • I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up

    I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

    I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

  • Is there a versa mount for 30 inch cinema display?

    is there a versa mount that fits my 30 inch cinema display? I bought it when they first came out and now I want to mount my monitor to the wall.

    The Apple display requires digital input. Dell has a 30" with analog and digital inputs
    <http://accessories.us.dell.com/sna/products/Monitors/productdetail.aspx?c=us&l= en&s=bsd&cs=04&sku=223-4890>

  • Repairs for 30 inch cinema display

    How can I find out if my 30 inch cinema display can be repaired?
    Thank you

    The Apple display requires digital input. Dell has a 30" with analog and digital inputs
    <http://accessories.us.dell.com/sna/products/Monitors/productdetail.aspx?c=us&l= en&s=bsd&cs=04&sku=223-4890>

  • Is it possible to attach Samsung Monitor to the 27 inch Cinema Display?

    Hello,
    I have an Apple 27 inch Cinema Display and I also have a Samsung 27 inch monitor.
    I would like to know if it's possible to create a dual monitor setup by connecting the Samsung monitor (dvi or hdmi) with an adapter to the Cinema Display's mini display port on the back?
    Does anyone know if this is possible? Or does it only work with another Cinema Display?
    I'd appreciate any help received.
    Thanks,

    Is it possible to connect the PC to the Samsung monitor via Dual link DVI and to the Apple Cinema Display via mini display port and work as a dual monitor setup?
    That should work if the PC has both DisplayPort and dual-link DVI (or two DisplayPorts).
    I'm thinking the best solution for MacBook Air is to purchase a Thundebolt display and hook that up to the Cinema Display and I think then I would have a dual screen setup at full resolution.
    That will work if you connect a Thunderbolt disk drive (with two Thunderbolt ports) between the Thunderbolt display and the Mini DisplayPort display.
    But currently I don't think there is a way to connect a PC to a Thunderbolt Display.
    Not unless the PC has Thunderbolt.

  • Random screen blackout 2009 24 inch Cinema Display... HELP.

    Random screen blackouts with 24 inch Cinema Display (purchased 2009). Never used with anything but same Macbook Pro (2009). No hardware changes on MBP. Just started June 6, 2012. Super annoying. Anyone else having this issue? Recommendations?

    Hello, Ertjie.
    The link titled Download the 24-inch LED Cinema Display Update from the kb/TS4045 article worked for me when I tried it today.  Click the "Download" link I post here or try the one in the kb article again.  Perhaps it will work for you now?
    However, I note that the kb article expressly states that this firmware update: 
    ...is only intended for use with and will only install on the Apple 24-inch LED Cinema Display while the display is connected to a Thunderbolt-enabled Mac. (EZ Jim emphasis added)
    If your Mac is really using Mac OS X (10.6.8)  as shown in your initial topic posting, your Mac may not be Thunderbolt-enabled.   If so, contact Apple or your Apple-Authorized Service Provider for help.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • My 30-inch cinema display often doesn't come on at startup and I have to disconnect it and reconnect to work.

    I have a 30-inch cinema display connected to a Mac Mini.  When I first boot up the computer after having it shut down for a couple of days, the display screen does not illuminate about half the time.  If I disconnect the display from the power brick and then reconnect it usually comes on, although sometimes I have to do that more than once.  It works fine once it on and displaying.  Anyone else seeing this?
    Rocketman

    Hi Rocky Rakoon,
    Thank you for your post, and welcome to the Apple Support Communities.
    I understand that your Apple Cinema Display is not turning on upon startup. I'd like to reset the following, as it may resolve your issue:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    You may also want to reset your computer's PRAM:
    OS X Mountain Lion: Reset your computer’s PRAM
    http://support.apple.com/kb/PH11243
    Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
    For more troubleshooting directly related to the Cinema Display, see this resource:
    Apple Cinema Display: Troubleshooting steps
    http://support.apple.com/kb/HT2810
    Thanks,
    Matt M.

  • 32 inch Cinema Display turns off repeatedly?

    32 inch Cinema Display has taken to turning itself off afer 30 minutes operation.
    Can this fault be repaired or should I be looking at buying a new display?

    I have a 20" Cinema Display connected to an early 2008 MacPro. After years of service the monitor suddenly started going black, quite randomly. It would even happen part way through playing an edit from FCP. Strangely audio would be maintained though picture was lost. If I switched monitor power off and on again I would usually restore video image. Sometimes I had to do this power cycling repeatedly.
    Looking through other posts it seemed a failure of the internal power unit was the most likely cause of the problem. But replacement seemed risky and not guaranteed. I considered buying a new monitor (probably a Dell UltraSharp since the Apple monitors are now so expensive).
    Then I tried something else. In System Preferences and then Energy Saver I set the Computer Sleep slider to 25 minutes (I had always previously kept it on 15 minutes). Bingo! Problem solved.
    Maybe this won't work for everyone but it certainly saved me some cash outlay. For now.

  • What happened to the 30 inch Cinema display?

    What happened to the 30 inch Cinema display?
    I went into the Apple store to purchase one, all they had was the (too small) 27 inch with the ugly black border.
    I did find a few used 30 inch Cinema displays on ebay, they are over $1100 USED.
    Any suggestions, for a 30 inch display?

    No suggestions, apart from changing to a non-Apple display such as a LaCie one.
    I think Apple really makes a mistake with the new displays - they are nifty, granted, if you want to watch TV or the like, but they'll loose the professionals, working all day long with their displays.
    1. the new displays have an excellent resolution, no trouble there, but they are like mirrors, reflecting lamps, etc. and very tiring for the eyes. That's already a problem with my MacBook Pro but I've got to accept it - what else is there to do - and fortunately it's only my secondary system.
    2. we have gotten used to 30" and do not want to downgrade.
    I am a translator and need to work with technical plants and several open files, so 30" really helped facilitate work. And now that's all gone as the 27" display definitely is not up to scratch for day-long work...
    I ordered a 30" display right when it became available, so it's quite old now. I worry what I'll do when it breaks down ...
    Suzanne

  • MacBook Pro W/30-inch Cinema Display

    Is there a working solution for this yet? is it possible to use the 30 inch or even a 23 inch?
    If so how?

    Let me better word the question.
    Can Windows XP Support the 30 inch cinema display at full resolution like in can in leopard via boot camp? Or a 23 Inch?
    Thanks

  • MBP3.1 can't run 30-inch cinema display

    I used my 30-inch Cinema Display on a G5 for quite awhile, but had to switch to my MacBook Pro when key apps like FC Pro required an Intel Mac. Since running it on my MBP 2.2 (Model A1226, introduced in 2007)/4 GB Ram/upgraded to 500GB drive I've had on-going problems with screen flickering, freezes and automatic rebooting.
    I've had  Apple replace the graphic display and the mother board twice, and the problem continues. Apple claims that the MBP can drive the display, but it doesn't look as if they're right. My laptop has none of the problems when disconnected from the display.
    Has anyone else had this problem?

    You don't say what connection adaptor you are using. See this Apple support post to see if it applies to you. http://support.apple.com/kb/HT3571

  • Older 20-inch Cinema Display powering on and off repeatedly

    I recently inherited an older (clear) 20-inch Cinema Display that I'm trying to use with my G5 dual 2.3 running 10.4.8. After purchasing the expensive DVI to ADC adapter and hooking it up, everything worked fine for about maybe 20 minutes or so until the display started to cycle on and off every two or three seconds (off for a couple seconds, then on for a couple seconds, repeat endlessly). This is accompanied by the power button glowing on and then off so it seems as if the power is cycling on and off by itself.
    Any ideas? At first I suspected the ADC/DVI adapter which got really hot when in use, but letting it cool down had no effect on the monitor's behavior. My clunky old 19" CRT display works with no problems, so it's not the video card. The Cinema Display is my old monitor from work, and never had any performance issues, although it's been in storage for almost a year.
    PowerMac G5 Dual 2.3 GHz   Mac OS X (10.4.8)  

    Same thing is happening to me. I have the 20" Cinema Display (clear with ADC).
    Last night I was in another room and all of a sudden I heard my G4 (Digital Audio) restart. I thought I was hearing things. Then about 3 minutes later I heard it again. I thought my daughter was up working on the computer or something. So I went up and there was no one around, but the computer kept restarting every 1 or two minutes. It was very strange – sometimes it it would go to sleep in the middle of the boot process.
    I was able to stop this process eventually by disabling the display power button in the Energy Saver and Displays prefs panels. But I would like this feature to be functional since it makes my setup easier to use for my kids.

  • Black band on my 30 inch cinema display. Any known causes?

    Hey everyone,
    My 30 inch cinema display is doing some wierd things which I havent encountered before.
    If you can see the image, towards the LEFT SIDE CENTRE, there are these BLACK BANDS.
    these start to appear after about 5-15 mins after the display is turned on. although they dont show up on bright backgrounds.
    If I let to monitor cool down for 10 mins and start it up again they are gone and they start appearing again in about a min or two,
    Has anyone seen any such issues before or is this a known issue with the 30 inch.
    Any ideas on what I should do about this.
    I will be taking it to Apple for sure as its still under warranty but would like to know
    what is causing this and whats apples take on it.
    Cheers,
    Ani

    I bought a 30inch as well a couple of months ago but have very little use except for watching movies. But when I use grey colour as the background the banding mark became very noticeable. It seems to be some kind of design issue i suppose and I dont know how Apple is going to address this. It's not a cheap monitor after all and i am very disappointed with this.

  • 30-inch cinema display: a thousand points of light

    I've been using my refurbished 30-inch cinema display for a month now with a new Nvidia Geforce 6800 Ultra DDL card. Moments ago I found my display was "enhanced" by thousands of teeny tiny points of yellowish greenish light. I changed the desktop image and it doesn't matter what it is. They're still there, though they change location with each image. Any clues?

    No, the cable is slack. I restarted my computer and the monitor came back just fine, so now it's a nonissue. It's always something, though . . .

Maybe you are looking for