Analyze and Write a log of windows logon/shutdown script and policy

Good Morning,
Is there a way to write a complete log of pc from when it start to receive the domain policy for the machine and user and for the startup/shutdown process?
Thanks for you help.
Salento.

Hi Salento,
Before going further, what do we want to do? Are we troubleshooting something?
If we want to troubleshoot group policy, we can collect group policy result to check if our policy settings get applied properly.
To collect group policy result:
1. On domain controller, click Start -> Run, type GPMC.MSC, it will load the GPMC console.
2. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please place appropriately). (Choose computer and select the proper
user in the wizard)
3. Right click the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML file.
If we need more specific information for troubleshooting group policy, we can enable gpsvc logging for group policy processing.
To enable Gpsvc logging, the following blog can be referred to as reference.
Userenvlog for Windows Vista/2008/Win7
http://blogs.technet.com/b/mempson/archive/2010/01/10/userenvlog-for-windows-vista-2008-win7.aspx
In addition, regarding group policy debug log settings, the following article can be referred to for more information.
Group Policy Debug Log Settings
http://social.technet.microsoft.com/wiki/contents/articles/4506.group-policy-debug-log-settings.aspx
Best regards,
Frank Shen

Similar Messages

Is ther any way of filling credentials in Windows logon using script?

Hello,
Is there any way to fill in login and password at windows logon using a script (that would be started via psexec)? Bat would be great, but any other is ok too. Nothing more, no mapping. Just logon.
I've spent a few days searching for this info, and haven't found any usefull info. Anyone tried such thing?
Cheers,
K.
PS. Sorry if I'm writing in the wrong section. Not shure where this topic should go.

There is no way to do this in Windows, Unix or any other system.
You can set a Windows account to "auto-logon" but only one account can be set per machine.
¯\_(ツ)_/¯

How to write and check log for windows phone enterprise app

We have developed a windows phone enterprise app for our customer, this app will be deployed thorough MDM solution, that is , being installed automatically after the device sucessfully enrolled into the MDM server.
Our customer required that if this app failed, there should be some log file they could send to us for identify the cause.
So we catch exception in the app and write the exception message into IsolatedStorage as log file , as following:
var appStorage = IsolatedStorageFile.GetUserStoreForApplication();
using (writer = new StreamWriter(appStorage.CreateFile("errlog.log")))
writer.WriteLine(format, arg);
writer.Close();
There seemed no problem to write the log with above code. but the problem is , how can the user get the errlog.log to send to us? I tried both Windows phone power tool and IsoStoreSpy tool, they both seemed
not able to read the isolatedstorage for the application to get errlog.log due to this application not installed by themselves.
Any suggestions?
Many Thanks
Jennifer

The easiest way I see to achieve this goal is to provide a feedback page, search on app local storage to find the log file, ask the end user to click button to submit any feedback and post the log file. You can set up a server to receive that file.
Try read this blog about consuming RESTful service in windows phone programming to get started.
http://blogs.msdn.com/b/wsdevsol/archive/2014/01/09/consuming-rest-services-in-your-windows-store-and-phone-applications.aspx.

Leap authentication and windows Logon

Folks,
Is it possible to login only one into windows and not login to the leap client, assuming that you are using ACS whihc is point LEAP credidentails to the WINDOWS domain controller so same password and username. Users in my company do not want to logon twice (windows and leap client) with the same credidentails.
Thanks

If you mean you want to still use LEAP but only want the users to have to log into WIndows to do so then the anser is yes. You just need to configure this on the ACU application. Under the profile go to Edit,Network Security. Make sure that you have LEAP selected. Click the configure button. Select Use WIndows Logon User Name and Password. That should do it. Take a look at the screen shot. Please be aware that the authenticatio will appear to be hung on the finding a Domain Controller section. Just give it about a minute or so to complete. Cisco is working on fixing this. Usually if you hit cancel once it gets to that point it still authenticates you and takes you onto your desktop.
Please remember to rate all replies.

How to write error log while creating invoice and avoid implicite commit

Hi,
I've have written code in exit RV60AFZZ in which I check for some possible errors while invoicing via VF01/VF04. If conditions are met then we create error message and display it to the user. As result we had a lot of missing SD invoices in FI when we did batch/mass invoicing. I've opened OSS note and SAP support team wrote that using statement MESSAGE is forbidden in UE. It can lead to implicite commits.
Do you have some example how to write error log for invoincing in VF01/VF04 transactions?
Thanks

@ sri nath. Please read post before answering. I wouldn't be posting trivial questions. As I wrote before it doesn't work. Also SAP support would not answer to the question in my OSS.
In VOFM, SAP is using routine VBFS_HINZUFUEGEN_ALLG to write to error log.
Mine is something like this in ue:
      PERFORM ZVBFS_HINZUFUEGEN_ALLG
                 USING VBAP-VBELN VBAP-POSNR 'ZSD' 'E '600'
                       SPACE SPACE SPACE SPACE.
(we have custom message class)
As result XVBFS and VBSK are filled with error, but posting is also done. Error log is filled but invoice is created and posted in FI.
That is not OK.
thanks

I have a mac pro for work and they made it log on windows at start up. how can i switch back to Mac as well so i will use the i cloud fetures ?

I have a mac pro for work and they made it log on windows at start up. how can i switch back to Mac as well so i will use the i cloud fetures ?

Is a version of Mac OS running on this Mac? Reboot and hold down the option key.

How to view the login log in window NPS after login cisco switch and without SQL server database

how to view the login log in window NPS after login cisco switch and without SQL server database
in summary
there is only log with event id 4400
A LDAP connection with domain controller XCPAWS20.cyberport.noc for domain NOC2 is established.

Hi adil,
For your issue, you can create a custom security token service (STS) and then set up a trust relationship between a SharePoint 2010 farm and the custom STS.
For more information, you can refer to the articles:
http://forums.asp.net/t/1335229.aspx?Sharing+Authentication+Ticket+Between+ASP+NET+and+Sharepoint
https://msdn.microsoft.com/en-us/library/office/ff955607(v=office.14).aspx
http://www.paraesthesia.com/archive/2011/02/01/working-with-windows-identity-foundation-in-asp-net-mvc.aspx/
Best Regards,
Eric
Eric Tao
TechNet Community Support

EA3/EA2 - Log dockable window and update flagging

I really like the log dockable window, but I have noticed an issue (in my opinion) with how it handles updates (ie log messages being logged) when the dockable window is minimised.
When the window is minimised, I have the Log tag at the bottom of my screen and there is no visible notification when messages are logged to one of the sub-tabs on the dockable window. If I open up the Log window, then the sub-tab that has been logged to is highlighted. However, this means that with the Log window minimised, I don't know when messages I am not expecting to be logged actually get logged.
Is is possible to have the Log tag that is visible when the window is minimised to notify that there has been messages logged?
theFurryOne

I don't minimize my log window just resize it to only show the tabs, so I see the highlighted tabs. However, as you point out this does not occur for a minimized window. I have logged bug 6982272
Sue

Fingerprint and Windows Logon

How can I use the Lenovo Fingerprint Software AND the Windows Logon with keyboard?
The Fingerprint-Software works very well, but my colleague would have both options.
When I want to use the keyboard for logon, there is a error message that requires the fingerprint logon.
How can I configure this system with both logon-options???

Well, it was working great, but now that I've let it sit in the bag with only the battery connected for about 10 hours, it's back to the same behavior.
The reader on my T500 was perfect. Not sure what's going on here, but this issue makes it unusable with the 3 try limit in the BIOS.

Qosmio G30 display flickering and unable to log into Windows

I have to press F5 to make the display visible everytime I boot up. I thought that it was a software related issue and I tried to format the HDD with original recovery CD. However, the screen keeps flickering from the BIOS stage.
Now, it is even worse. The screen is flickering when power up and I cannot log into Windows MCE after the HDD formated.
After reading the related articles and FAQ, I suspect it was a graphic card (hardware) issue.
My graphic card is NVidia Go7600. Is this true and is it a must to change the hardware (graphic card)?
Appreciate your advice before I contact the local support team.
Thanks a lot!

Hi!
Thats a strange issue. Do you have the same problems on an external monitor?
If a display is flickering, the display itself is defective because the FL-tube is causing the error. I think the best is, when an ASP (authorized service provider) checks your Qosmio G30.
Here you can search for one:
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an ASP
Good luck
Bye

Log in window re-appears over and over.

I try to log in, top tool bar begins to load, then screen turns blue and log in window appears again and again and again...Deja Vu. Ideas? Thanks!

Try starting up in Safe Mode.
For more info:
http://support.apple.com/kb/HT1564

What am i to do if my apple macbook air won`t let me log in? i enter the right password, but the log`in window appears over and over again, and won`t let me enter my account!!!

what am i to do if my apple macbook air won`t let me log in? i enter the right password, but the log`in window appears over and over again, and won`t let me enter my account!!!

Try restting the password. Boot into Recovery (⌘R), in the Menu Bar, you'll see the option to reset password.

Analyze and optimization

Hello everyone,
I'm on this subject for now 3 weeks and i need help.
I'm trainee in a company where i have to analyze and optimize their GPO as simple as that, I so learn in detail how does this tool work ect and other useful things about Active Directory.
I learned their 60 gpos (Some rules up to 600 settings...) and their thousands parameters which is essential for me and during my searches i found many many many softwares to detect parameters conflicts or duplicated settings, but after all my tries i'm
not satisfied today by what i found.
I used a trial version of GPOAdmin, the GPO Reporting pack from SDM, probably all the Microsoft tools, ActiveAdministrator ect ... I mean all these tools are very powerful and allow many features but i just need something that will find and tell me where
are all my conflicts on my domain and by this I will correct these settings to have a full capable domain optimized and users won't complain anymore because they'll have a faster logon ect...
Maybe I don't use the products as i should or maybe it doesn't even exist but it seems very long to analyze all by my self and write every parameter on each object that will be applied and check if there won't be conflict or another GPO for this setting.
Maybe Powershell can help me on this but I don't know how to use it to.
So here I am and if you have any idea to help me on the best practice or someone had to do the same job as I have tell me I'll be very happy to receive your information.
Thanks and sorry for my English.

> I mean that if there are 10 gpo for the domain and 10 others on children
> UO, some parameters will be overwritten (Conflict) or the same
> parameters will be set 5 times (Duplication).
Yes, that's true. But setting a simple registry key takes a time windows
cannot even log to the gpsvc.log file. This is from a VM running on a
desktop system concurrently with 4 other VMs:
GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 1 =>
Microsoft.CredentialManager [OK]
GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 2 => Microsoft.GetPrograms
[OK]
GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 3 => Microsoft.HomeGroup [OK]
GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 4 =>
Microsoft.iSCSIInitiator [OK]
GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 5 =>
Microsoft.ParentalControls [OK]
GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 6 =>
Microsoft.PeopleNearMe [OK]
GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 7 =>
Microsoft.UserAccounts [OK]
GPSVC(478.d68) 11:48:19:829 SetRegistryValue: 8 =>
Microsoft.WindowsAnytimeUpgrade [OK]
And even here it takes only about 1 ms average - on a real system, this
is about 50 times faster.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Fingerprint reader on DV6t no longer works on windows logon

For some reason the fingerprint reader on my Pavilion Dv6t, LM720AV, does not work on windows logon anymore
I get the usual lock screen where I have to enter my password. The fingerprint option no longer appears
I have tried rebooting, powering off, reinstalling the validity sensor package sp55109 and it still does not work
Any help would be greatly appreciated
Thanks

Export the Webcard Database:
If you have working SimplePass software, Export your Webcards before proceeding. In the event that you must later remove the SimplePass software, your webcard backup can be used (imported) to restore your website login information.
Start SimplePass > Settings > Export NOTE: File will be named *.tsd
Then:
Try / Consider:
===================================================================
The Hard Reset:
This method works for a variety of Driver connection and ‘stuck’ program issues.
Shut down the computer
Disconnect all external devices - everything.
Remove (disconnect / unplug) the AC power
If the notebook contains a removable Battery, remove it
Press and hold power button for at least 30 seconds
Reinstall the AC power cord for first startup ** See Note
Power on - Log in
Next time you shut down the system, reinstall the battery.
** Note: If time is short, reinstall battery the first time and be done with it.
Reference:
Hard Reset to Resolve Hardware and Software Issues
===================================================================
If that does not resolve the issue, then try this:
Repair the SImplePass Software:
Control Panel > Programs and Features >
Look for this program:
Right-Click on HP SimplePass
Select "Repair"
Restart / Reboot your computer and log in...
====================================================================
Kind Regards,
Dragon-Fur

Problem logging off windows 7 on AD domain - Sound Card issue New model iMac 2011

I am looking for help for a strange problem we have on our new 21.5inch iMac computers (mid-2011 model), Our whole IT team have worked for a week to find solutions and we have exhausted all of our ideas. Please note we have an identical setup on our old mid-2010 model iMacs, which experience NONE of the same problems, windows logon and log offs are quick and painless. We have conducted side by side identical tests, so this forces us to assume it is a hardware/driver issue.
Basically our iMacs have BootCamp installed with Windows 7 Professional, Windows 7 is our default operating system. We have joined these computers to our Active Directory Domain and the users are all roaming with redirected folders.
The issue is the following: When a domain user logs off, it can take up to 25 minutes for the User Profile Session to finally log off and return to the normal Ctrl-Alt-Del menu, the next user who logs on usually is just left hanging and with no ability to logon. After a hard-restart the system logs on normally, but then can experience same problems at logoff.
We see the issue when the user watches lots of Flash Player videos on a browser such as Firefox and Chrome, although we've seen the same problem when other applications are used on the computer such as Windows Live Movie Maker.
So far we have found only one solution: If we disable the Cirrus Logic Audio Driver CS4206A (AB 9), and High Definition Audio Driver from the Sound, Video and Game Controllers within Device Manager and restart the computer, the system behaves normally, logon and log off times are a few seconds. But naturally we have no sound which is unacceptable.
We have tried everything we can think of including: Fresh installs of both OS, full updates of OS's, Firmware and Software, Manually updating sound drivers, changing users and AD Domains and attempts to force stop all services on logout etc.
We would appreciate any and all help to get to the bottom of this, including advice on what to try next.
Regards,
IT Project Manager
Tumo Project
www.tumo.org

Just wanted to feedback on this and say our solution was the following:
Download and installed Universal Driver Pack within Win 7 , which included a AMD High Definition Audio Driver and replaced the High Definition Audio Driver Installed.
I have also informed Apple and Microsoft of this issue, hopefully someone will take some notice and update the driver.
-TumoAdmin

Analyze and Write a log of windows logon/shutdown script and policy

Similar Messages

Maybe you are looking for