And now it stops working?

I go to Isync in the Menu bar - it says Syncing disabled
since when? worked y'day
so i go to the ISync help and it says look at the log
"4:04:49 PM Warning Mac OS X synchronization services are not turned on on this computer."
mmm not good
so i trash prefs - nope
i go to isync panel for prefs and "Reset Sync History" is dimmed
any ideas?
john

What Operating System? Is ID patched to version 8.0.2 (the patch was released last week). Do you have a Font Manager?
Have you tried replacing your preferences? See Replace Your Preferences

Similar Messages

Yogurt spilled on my macbook air and now sounds stopped working. Pls help

Hi!
So mac and yogurt were inside my bag and the yogurt's lid accidentally opened getting into my mac's charger, usb and headphones port. I tried turning it on and everything seemed fine, sounds and the heaphone port were both working but the usb port wasn't so i just wiped away the yogurt. After wiping everything I could see off, i tried connecting my mac to the power and it's working. Usb port not working tho and the sound stopped working, tried connecting a headset and still not working. Those seem to be the only problems. Right now my mac's open and standing to it's side near the heater to dry. What should I do? :(

Right now my mac's open and standing to it's side near the heater to dry.
Yes, everyone tries the "dry it out" method, doesnt work,... when it does 'work' it works for a while until corrosion sets in. Make a service call.
Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.

Updated itunes to 12.1.1 and now its stopped working

I just updated iTunes to 12.1.1 on my laptop as it prompted me to and now it just wont work if it loads at all it becomes unresponsive when i try to connect ipad or iphone.
I have uninstalled it and reinstalled it and it still the same i cant seem to go back to the old version so im now stuck on what to do.
Any ideas
Thanks

Good Afternoon sjwoods83,
The resources below will help troubleshoot the issue you are having with iTunes for Windows being unresponsive since the software was upgraded. You may need to uninstall other components in addition to the actual iTunes application. It's also possible that antivirus software may be affecting iTunes. Click on the link below for complete details.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
http://support.apple.com/en-us/HT203206
I hope this information helps ....
- Judy

Tried to update iphone via itunes and now all stopped working

So, after some issues with drivers over the weekend, I decided today to finally update iphone.
Attached phone to laptop, started upgrade.
Now it has completely frozen with the itunes icon on the screen alongwith a usb cable.
According to itunes the phone is in recovery mode and needs to be restored prior to anything else.
But it simply won't do anything. It has lost and since found the driver again, itunes is working, phone is frozen.
Apparently the best driver is installed.
Going to work now, so will check in later.
Cheers all.
G

You will have to restore. If the option is there or available forst back up your device to itunes. After the backup is complete you may backup from restore. This will restore your device whilst at the same time keepin all of your previous data. nothing will be wiped off.

I downloaded a new version of Itunes on my PC now some songs and videos have stopped working as well as ringtones have disappeared.

I downloaded a new version of Itunes on my PC now some songs and videos have stopped working as well as ringtones have disappeared.

I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!

Mistakenly opened all the folders in my library of music and the Finder stopped working. Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing they reappear

mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

This content requires hdcp for playback. so I paid $100 for it and now they stop it from working?

I have an atv 2, my tv uses componet, I have used it to rent and watch movies on it for a year at least but now it says this content requires hdcp for playback. so I paid $100 for it and now they stop it from working?
I also have the first atv, I get the same message

lol, I had to go look at the back of that, I've been using it so long with componet. I started getting the hdcp message a few months ago on it. been using it for years with componet now I cant. what I meNt on the AT2 is that when I bought it, I was able to use it, rent moves, etc. since I got it using an adaptor because of my tv. It just recently was rendered incapable along with the componet output on the AT1.
My tv is a 65" Hitachi rear projection, with no hdmi. It's old, but still has a great picture

I've been using InDesign for class. Now it "stops working" when I try to apply text and closes out

I've been using InDesign for class. Now I'm trying to do a newsletter for assignment and it keeps "stop working" and closes out the program.

What Operating System? Is ID patched to version 8.0.2 (the patch was released last week). Do you have a Font Manager?
Have you tried replacing your preferences? See Replace Your Preferences

IMessage in my iPhone 4 stopped working over 3G and now its only working when i connect my iPhone to Wifi!!! please help

as mentioned in the subject. i was enjoying sending msgs using iMessage using 3G internet connection but since yesterday my iMessage stopped working and now its only working when i connect my iPhone to Wifi !!!
without WiFi it show my Message Not Delivered in Red !!
and this issue not only with me.. even with my freind. so please help to find a solution

I know why. It happened to me before. Try typing random stuff, eg aaasjddjfndirinfekdnkedindor , into the text box, then delete everything using the x-arrow on the keyboard. It should work now. If not, repeat the process again and again. It's because it needs to send the signal to the other recipient(without him really knowing it, this is to check that he can see when you are typing, you know, the "…" bubble), then check that you have 3G at good speed, then enables iMessage. It works for me this way...hope it does for you too (:

Hello my iMessage and FaceTime just stopped working and now it is not verifying my apple id why is this?

HEllo my iMessage and FaceTime suddenly stopped working and it won't let me verify my apple ID why is this?

likely an Apple problem
http://www.apple.com/support/systemstatus/

HT4528 I downloaded a text tone yesterday and it has stopped working now .Any ideas or help me make it work?

I bought a text tone last for .99 of the itunes store. It worked fine last night and now it wont work and when I recieve a text now its silent so I have no idea I got one unless I look. Any ideas as to why this happened or how I can fix it??

The following guide gives information on how to sync ringtones from your computer to the phone. The reference section at the bottom of the quide also gives instructions on how to convert a song to a ringtone. https://discussions.apple.com/docs/DOC-3792

USB hub and internet sharing stop working after sleep

Hi,
I have a relatively new Bluestork USB hub I purchased to connect multiple USB devices I have at the same time. It used to work correctly under Leopard, but now it stops working each time the computer wakes up from sleep. I have to restart the computer for it to start working again. Both link and power LEDs stay on, even when the hub is not recognized.
My second problem is related to internet sharing. It stops working after each sleep/wakeup cycle and the only way to make it work again is to restart the computer. It used to work correctly before Snow Leopard as well.
I have all the Mac updates installed.

Thanks Barry.
The hub is on its way to the manufacturer for after sales service...
But the issue with AirPort remains the same, even after resetting SMC.
Some clarification:
* It happens just after computer wakes up from sleep. Restarting solves the problem and the issue doesn't arise until computer goes standby again.
* The whole WiFi card becomes unresponsive. It is not only the Turn Off button, but the whole functionality is stopped. The card can not be activated/deactivated and it doesn't connect to any network. If it is used for internet sharing, clients are unable to connect.

HP Pavilion dm1-4000au Entertainment Notebook PC_Keyboard and Touchpad Suddenly Stops Working

Hi there,
I have an HP Pavilion dm1-4000au Entertainment Notebook PC (QG411PA) running Windows 7 Ultimate 32-bit for more than a couple of years already. During those times up until now, whenever my laptop is on standby for an hour or so, its keyboard and touchpad suddenly stops working, regardless if its running on battery or on AC power.
I always ensure that I have an external mouse in order for me to navigate properly and pull up the on-screen keyboard in order to type once that issue arises.
All appears to be updated in terms of Windows Updates and I even reformatted it, but issue still persists.
Is this particular issue that I am experiencing a harware issue? Perhaps a software issue? Or maybe a defective model itself?
Your prompt response is highly appreciated.
Sincerely,
Led
This question was solved.
View Solution.

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties to resolve Touchpad Issues with your Notebook
We will surely assist you with this
Steps to drain the Static charge and loading default BIOS settings to resolve the issue
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 or F9 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till the Unit loads the Windows Operating system
Now please download and re-install the touchpad drivers for your Notebook from the HP Support Site
Please Click this Link to find more troubleshooting steps to resolve this issue
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Hi I have an iPhone 4 and suddenly it stopped working. Could here notifications and nothing on the diisplay. Wake up button on top is not working. so unable to restart the phone. Wanted to try restore from iTunes but Find my iPhone (iCloud) is on.

Hi I have an iPhone 4 and suddenly it stopped working. Could here notifications and nothing on the diisplay. Wake up button on top is not working. so unable to restart the phone. Wanted to try restore from iTunes but Find my iPhone (iCloud) is on. How to recover or restart my Phone

Follow these steps to log into your iCloud account on your computer and deactivate "Find my iPhone" on your device:
Remove an iOS device or Mac on which you can’t turn off Find My iPhone
If you can’t turn off Find My iPhone on the device, turn off the device so it goes offline, then remove it from Find My iPhone on iCloud.com.
Note: You can also remove your iOS device by first erasing it—just follow the instructions below for removing an iOS device you don’t have. You can later restore the device from an iCloud or iTunes backup.
Turn off the device you want to remove.
Sign in to icloud.com/#find on another computer with your Apple ID (the one you use with iCloud). If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, select the offline device, then click Remove from Account. If you don’t see Remove from Account, click All Devices again, then click the Delete button next to the device. If the device comes online again, it will reappear in Find My iPhone. If your device reappears, turn off Find My iPhone on the device (follow the instructions above for removing a device by turning off Find My iPhone), or if it’s an iOS device and you no longer have it, follow the instructions below for removing an iOS device you no longer have.
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud). If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.
Note: If you’re trying to erase a family member’s device, that person will need to enter his or her Apple ID password on this device. If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased, and someone else can now activate the device.
copied from: iCloud: Remove your device from Find My iPhone

Update to 10.6.8 and HP F2100 and D2400 Printers stopped working. Restored 10.6.7 and printers from Install CD's but not working, Same with scanner

Help....
Updated to 10.6.8 and HP F2100 and D2400 Printers stopped working.
Restored 10.6.7 and printers from Install CD's but not working.
Same with F2100 scanner
Am I glad I kept Windows desktop as without it I would be scre**ed now
What is going on with this latest update as its like a return to Windows with things crashing or hanging up every few minutes????
On a MacBook Air that has not been updated everything still works so what has 10.6.8 done and why won't the restore to 10.6.7 work?
Steve

None of those things you mentioned were what I suggested.
I'm guessing the "ctrl click in printer preferences" means you Reset the Printing System?
If so, that is what I would have suggested if deleting it by selecting the ( - ) button and then adding it with the ( + ) button.
But, if HP has a fix, it likely needs to update its drivers.

And now it stops working?

Similar Messages

Maybe you are looking for