And that happens with the Professional software in a MacBookPro

Hello, I Am to one week of buying me a MacBookPro and want to clear some doubts since the use that I want to give him is to edit videos, and uses Adobe Creative Suite 2, Macromedia Studio 8 And Final cut studio
and one of my doubts is that he listens that the version of final cut studio 5 is not compatible with Rosseta and and that were showing a few Universal versions on March 31
Are these versions equivalent to something this way as the versions 6?
Is this version better than 5?
The same problems were provoked and there was showing other versions for Adobe Creative Suite 2 and It Macromedia 8 or Only it happens with Final cut?
Was it appreciating the change of one powerbookG4 to a MacBookPro as to buy me one?
That think ..... that is the ideal thing to work Video and multimedia
Good I wait for your commentaries
Thank you
MacBook Pro     Powerbook

Lost information
https://www.adobe.com/account.html for serial numbers or subscriptions on your Adobe page... or
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

Similar Messages

  • I am a language intructor, can I use Adobe Presenter to work properly on both, English, and Spanish presentations with the same software?

    I am a language intructor, can I use Adobe Presenter to work properly on both, English, and Spanish presentations with the same software?

    It shouldn't be an issue. Ultimately, Presenter doesn't care what language the content or audio is in, it will deliver it just the same. The only issue I could see causing problems would be the player skin. It has Spanish lables, but they only show on a computer with the OS set to Spanish. If you want the student to view both and English and a Spanish version on the same computer, you may need to have two versions of the language.xml file where you have one that has the desired English lables in the "en" section and one where it has the desired Spanish labels in the "en" section. You would then swap these files in and out of the folder located at,C:\Users\{UserName}\AppData\Local\Adobe\Adobe Presenter\Themes , as you need to publish an English or Spanish presentation.

  • I have to ctrl+f5 to force refresh the site in order to get the updated page, and that happens with all the sites (news, sport....etc), Why?

    if i open cnn.com for the first time today and try to open it tomorrow i will get the yesterday news and not the updated one till i force refresh..and that with all the site

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • HT4721 Before the new upgrade, I was able to swipe to the left to exit out of open applications. How do I do that now with the upgraded software?

    How do I close open applications now with the new upgrade?

    That's a little strange, because I don't think that was ever an option for trackpad gestures in OSX. At least it's not an option in System Prefs > Trackpad
    You can set this up with BetterTouchTool,  though.

  • TS1702 Has anyone else had this problem? Been waiting for 2 days for an app from apple store to install on my iPad. It just keeps saying "installing" have tried to update other apps at the same time and that happens is the app icons continue to display "w

    I have been waiting for two days for an app to install on my iPad. Seems like something is stuck as it just keeps displaying "installing". Can not see where I can delete and start over and it's preventing me from updating or downloading any more games. Acts like a corrupt file or something. Can anyone help solve this problem? Thanks

    Did anyone ever suggest you reset your PRAM?
    http://docs.info.apple.com/article.html?artnum=2238
    Also might want to try resetting the SMC, although I
    doubt there's an issue there.
    http://docs.info.apple.com/article.html?artnum=304123
    I'm getting tired of people who supposedly know what
    they're doing simply guessing that resinstalling the
    OS might solve the issue. It's like trying to dissect
    a frog with a sledge hammer, and wondering why you
    didn't learn anything about anatomy in the process.
    These sorts of things, although bizarre, should be
    (and probably are) fixable without major surgery.
    Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
    I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
    Would TechTool Pro detect a bad HD or RAM?
    Thanks....

  • How do you close apps you hve looked at with the new software update?? You used to have to double click the home button and the apps would come up to delete bu that doesn't happen anymore.

    How do you close apps you hve looked at with the new software update?? You used to have to double click the home button and the apps would come up to delete bu that doesn't happen anymore.

    The apps in the multitaskbar should appear like pages on the whole display. To close them, just swipe from the bottom to the top. you can select single apps for closing, when you swipe them like you would swipe your homescreens.

  • I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update.  They tried ch

    I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update.  They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.

    Wowuor, 
    Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted. 
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens

    Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine.  But I do not understand why it wont install mac os x 10.5?????  PLEASE HELP ME.  Thanks  Hamid

    Try a new post in the 10.5 Installation forum.
    DALE

  • I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered

    I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered to reduce contrast. The background is now grey as well rather than white. The accessibility options permit only three choices. First, increase type size. With the the low greyscale, thin typeface, increasing type size makes it HARDER to read. There is no option for contrast enhancement. Third, the background switch options suffers from the same deficit as the white background. The third choice is to enhance brightness but without the option to change contrast, this is useless. Am I missing something? Can this be fixed? How? When? Are you planning a similar negative "update"/change to other devices?

    I am having the same problem. I have gone through every setting, set the bold font, contrast, larger font....everything I could find in any post to try and help - and between the new color scheme that makes it virtually impossible to use the pictures of my grandchildren as background (the picture colors now become the theme colors - which now match the colors of many of the "flat" icons...) I am finding the phone very difficult to use--espeically things like the calendar which has now become very hard to "see" and use. If I can't revert this thing to iOS6, I may have to get a different phone.

  • I have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

    i have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

    This is not my problem. However, I think it may be related to an old speaker. I was using the 30 pin adapter for about a week after the upgrade to 7.1.2. But I think with the update the speaker won't work anymore. I will try with a new speaker system. Thank you for trying to assist.

  • HT204380 I have 8 mb of broadband and am unable to use facetime as it loses the connection. The same happens with Viber. This seems to have happened since the last software update. Has anybody else had this problem.Regards, Kevin

    I have 8 mbs of broadband but it does not seem to be adequate for using Facetime or Viber. I lose the connection via Facetime every few minutes and Viber doesn't work at all. It always says that the network connection is poor yet it's showing a full signal on the phone. It was a lot better before the last software update. has anybody else had this problem.
    Regards,
    Kevin

    CS2 is very old and reached its "end of life" a while back.  So probably won't run on modern operating systems.  If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    Nancy O.

  • I'm facing a problem only for this account that whenever I purchase  a ringtone after few hours it disappears from the sound and it happened with all the ringtones I purchased since 2 days. also  when i visit the store from the same account to downlo

    I'm facing a problem only for this account that whenever I purchase  a ringtone after few hours it disappears from the sound and it happened with all the ringtones I purchased since 2 days. also  when i visit the store from the same account to download the ringtones again i have to buy them again and again . Please try to fix this problem for me and refund my money back.

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    There are lots of other posts on this forum about ringtones. If you want to contact iTunes Support then you can either use the 'report a problem' page : http://reportaproblem.apple.com
    Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Curious about the iOS 5 software that is coming out.  If I wait til its release to buy my iPhone 4 will it come with the iOS5 software already on it?  or should I go ahead and buy my iPhone 4 and then update the software when the iOS5 is released?

    curious about the iOS 5 software that is coming out.  If I wait til its release to buy my iPhone 4 will it come with the iOS5 software already on it?  or should I go ahead and buy my iPhone 4 and then update the software when the iOS5 is released?

    Keaten wrote:
    Yea I would have to say wait until the release of IOS 5, because the phone will probably run it a lot smoother. I mean go ahead and buy the Iphone 4 if you are dying to have it, because you can just update it which is no big deal at all, but it would be the smarter thing to wait for the new updates.
    And the networ issue as far as I am aware is fixed on the Verizon iPhones, so it really depends on which service you have.
    - correct me if i am wrong
    Have to disagree here, Apple have not even announced an iphone 5, it is pointless to speculate that we will see one or not see one until Apple actually releases a statement. ios was built and tested on the iphone 4 so there will not be any slowdown or laggyness compared to a phone that has not been released yet.
    If we are advising potential apple product buyers then we should not be putting them off buying a iphone 4 on speculations alone. Just because apple have for the last few years released an iphone every june/july does not mean then have to stick to this approach.
    Apple have not issued any statement regarding an iphone 5, until this time it does not exist, only in heresay on the internet.
    Any one looking to get an iphone 4, to you i would say waiting until ios 5 is released is a personal choice, no matter if you wait or not you will be able to update via itunes. One way or another in the future you will have to do an ios update via itunes whether this is the 5.0 software or 5,2,1.
    Please note that Apple are very closed mouthed about new hardware releases and potentially a new iphone could be round the corner, however there is no evidence to suggerst this, i.e Apple have not even mentioned an iphone 5 this year anything you hear towards the contrary is media spin thus far and speculation.
    ios 5 was built and tested to work seamlessly on iphone 4, the beta software released to developers is being tested on iphone 4. Please do not listen to people telling you that the iphone 4 will not run this ios as well as a phone that does not exist yet. When iphone 5 launches it will most likely have dual processors and not until its launch will the next gen apps start appearing.

  • HT1688 I tried to update my iPhone 5 this morning with the new software update and now it won't turn on. When I plug into my itunes account, it says my phone is in recovery mode. Was working perfectly prior to the attempt to update. How do I fix this?

    I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?

    Zach Doody wrote:
    itunes says i cannot update the phone as it is in recovery mode.
    That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
    Restore it. You don't have a choice at this point.

  • With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution, With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution

    With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution, With the new software for the I phone it appears 12 000 mails without reading and I can't find the solution

    Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
    Bebers5

Maybe you are looking for

  • Windows 7 will not recognize ipod touch, but itunes does.

    i've removed iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour,  and Apple Application Support.  then reinstalled itunes 11.0.2.26; restarted computer.  tried diff usb ports, cables.  same issue -- the ipod is NOT recogni

  • Setting skinclass style property of ViewNavigator causes runtime error

    Hi, I am building a mobile app with Flash Builder 4.5. the project is of type ViewNavigatorApplication. What I want to do is to add an image as a background to all the Views. In a previous email I was told to add the image as a child to a customized 

  • SQL PLUS QUESTIONS

    According to the tables and attributes below I need to solve 25 questions. I answered some of them and some of them I couldn't solve. I need your help please. school (sch_code, sch_name, sch_phone, sch_dean) advisor (adv_code, adv_fname, adv_lname, a

  • How to solve the emca error

    how to solve the warning and severe error.................... [oracle@ip-********* Oracle11g_R2]$ emca -deconfig dbcontrol db -repos drop STARTED EMCA at Mar 29, 2012 10:20:41 PM EM Configuration Assistant, Version 11.2.0.0.2 Production Copyright (c)

  • AE Mediacore Errors After Latest Update

    Hi, I have had a lot of problems on both of my computers after the latest update. My major one is Premiere, but thats another forum. Both my computers throw the error in the image when I launch AE. AE runs, but I want to make sure I am not going to s