Animation slides skip content in published flash

Dear helpers and experts,
I may be new to Captivate, but have worked with all its
predecessors...
My simple demonstration consists of 6 slides:
a text slide;
an animation slide built from an avi file (123 sec);
a text slide;
an animation slide built from an avi file (23 sec);
a text slide;
an animation slide built from an avi file (165 sec)
When previewing all content is shown. Then I publish (export
HTML). The viewed flash skips the end of all animation slides: from
the first only 107 sec are displayed, from the second only 10
seconds, from the third only 110 seconds are displayed.
To be precise on the previw: it is the Play button on the
timeline where everything is played - not "Play this Slide" in the
Preview button - which creates a temporary flash file.
With uncompressed Flash it's the same problem.
What went wrong here?

I have now found the source of my problem:
There is a difference whether I insert via
1) Insert > Slide > Animated Slide - or
2) Insert > Blank Slide; and then in the blank slide:
Insert > Animation
In case 2 I get the dialog "New Animation" where I can set
options. In case 1 this dialog does not show up and with Slide
Properties the desired option can not be set.
The desired option to cure the problem is "Synchronize with
Project".
The Help text concerning this option "Select this option to
synchronize the speed at which the animation file plays with the
Timeline speed. (If you find that the animation file is not playing
smoothly, test with this option selected and cleared to see which
setting gives you better results.)" did not trigger my brain at
first, because when playing the animation (imported avi) in the
TImeline it is displayed correctly with or without this option.
Hence: if the final flash file skips the end of imported
animations (eg avi) and jumps to early to the next slide:
- Import the animation into a blank slide (do not import via
Insert > Slide > Animated Slide)
- Set the option "Synchronize with project" in the "New
Animation" dialog
Klaus Daube

Similar Messages

  • How do I get Flash animated slide shows to work on iPads, iPods, and iPhones?

    How do I get Flash animated slide shows to work on iPads, iPods, and iPhones?
    I'm using a PC. Web Site Flash generated slide show works fine on PC's.
    Does not work on Apple platforms.
    What do I use to to enable animated slide shows to work on Apple platforms?
    cliffordf51127948

    Hello,
    Flash Player is only supported on Apple OS X systems (10.6 - 10.10).  It is not, and has never been, supported on any i-Devices.  There are no plans to support these platforms.
    Maria

  • Setting a Conditional Action for Pre-Test questions: Skipping Content Slides

    OK boys and girls, let's see if this is even possible within one course SCO, or if this a multi-SCO solution (which means I'm toast, because we don't have the multi-SCO aggregator)?
    I want to set up a prescriptive pre-test. In my ideal world, answers to each individual question would either enable or disable the content slides connected to the question. If the user passes the pre-test, they could opt to skip the prescriptive stuff and complete the course. If the user fails the pretest, they would have to view the enabled content.
    Is this even possible in a single SCO world?
    Justenuf

    Jim belongs in that pantheon of good guys as well, so many here have pointed me in the right direction and helped me move forward with the capabilities of this software. And, in that spirit - here's my work around for the pretest/post test in a SCORM 1.2 environment:
    Created an entrance slide that allows opting totake the pretest or not - but only allows you to take it once.
    Created one test (take off the question x of x widget) split it and slide the content in between it. In this case, 10 questions with 5 in each set.
    Titled the first set of questions as a PreTest and the second set as a Post Test.
    Set my passing score at 4 correct. (the user only needs to get 4 out 5 on either set correct to pass - and I'm setting up an action that only allows the user to see the questions they missed if they fail the pretest.)
    Created variables for each "pretest" question and set them at 0. Created on Enter advanced actions on each slide following a question that toggled the variable to 1 if the question was answered correctly  if "CpQuizInfoLastSlidepointScored is equal to 1" then "Assign Question<x> with 1"
    Created an On Enter advanced action for each content area slide "Skip #" that allowed prescription:
    "If Question # is equal to 1 or cpQuizInfoPassFail is equal to 1, then Go to Next Slide"
    Only the content connected to the missed questions in the pretest is seen.
    Copied the same On Enter advanced action the Post test questions and renamed it "SkipPost #" that allowed prescription:
    "If Question # is equal to 1 or cpQuizInfoPassFail is equal to 1, then Go to Next Slide"
    Only the questions related to the reviewed content are seen
    The sum total of these activities is the following -
    The user can choose to take the pretest and complete the course by gettiong 4 or 5 questions correct and jump to the exit page.
         If the user takes the pretest and scores lower than 80%, the content for the missed questions is viewed and the user must answer the questions regarding
         that content. The user passes the course when he/she answers the fourth question correctly.
    The user can choose to view the content, take the post test and pass the course by answering 4 of 5 correctly.
    it's running right in preview, in web browser preview and on my LMS previewer, with one navigation error.
          the error: after failing the pretest, taking the prescribed content and anse wering the questions correctly, the course occasionally jumps to the results page
         and s displays a failure message, then freezes in place. it does NOT happen each time, which is why I am cy urrently scurrying back to my happy place to dwell
         on this mystery awhile.
    Justenuf

  • Animations doesn't work when publishing from PPTX (Powerpoint 2007)

    I have Presenter 7.0.2 (build 7464), running over PowerPoint
    2007, and all the animations based on activators are not
    controllable after publishded.
    What I need is the same behave of published flash contents
    as the powerpoint presentation permits:
    - For example, one action button, uppon click on it,
    activates some animations effects on others object elements.
    Does the Adobe support (Platinum plans), or any of you that
    hoppefully had already fix an way to avoid this, can help on this ?
    Thanks in advance!

    Hi,
      Today I have found the 7.0.5 Update, build 7588, for Presenter 7, so I started to think that my long issue concerning the animations problem could be over with this update ... but it did not!  :-(
      After the update installation, the same presentation gives me the same wrong behavior.
      It seams that the animations triggered by activators used on PowerPoint 2007 presentations continue without any support.
    Is that right ?

  • Extending an animated slide's length

    We have several lessons with some animated slides (full
    motion captures
    of scrolling application windows).
    The client decided that the scrolling is too fast and wanted
    it slowed
    down. Unfortunately, simply extending the animation on the
    timeline
    doesn't seem to have any effect - the animation plays at its
    original
    rate, then just sticks on the last frame of that animation
    for the
    duration of the slide.
    So our workaround is to export the animation itself to Flash,
    adjust the
    framerate, publish as a SWF, and import it back into the CP
    file. The
    result is a little 'jumpy' but seems to work well enough.
    Any other solutions to this particular issue? Just wondering
    if there
    are other approaches. If not, then just adding this for
    future reference.
    Erik
    Erik Lord
    http://www.capemedia.net
    Adobe Community Expert - eLearning
    http://www.adobe.com/communities/experts/
    http://www.awaretips.net -
    Authorware Tips!

    nvrmore100 wrote:
    I actually have a lot of other buttons that manipulate the displaying of the array in various ways. I thought about creating a much larger array, but this would break all the functionality I have for displaying next, previous, last, items in the array.Then your functionality is incorrect. You should have a variable that keeps track of how many items are stored in the array. This will always allow you to access the last element. And when this variable reaches the size of the array only then do you increase the size of the array.
    I agree, I think this is exactly my issue, unfortunately I do not know where to go from here. Is there a way for me to recreate the Item array entirely, rather than having a local array to the addbutton action method?I already showed you how to fix your problem. Delete your line of code and replace it with mine.

  • In C4: What determines the max number of slide one can successfully publish?

    Using C4.
    I am required by policy to use an original PowerPoint file. The total number of slide equals 72 (file size 38,201 KB when completed). The internal customer wants a "kicky" presentation based on her slides, so I must use some of the Captivate tools (e.g. zoom area, highlight box -- about the limit of my skills). And there must be spoken narration, not the text to speech feature. Total time for the 72 slides is 22.5 minutes when all is done. When published the narration is good, but the "kicky" part fails. Specifically some highlight boxes do not appear on many slides.
    I deleted the table-of-contents feature. The most unusual tools that I'm using are the certificate widget, and a page turning widget.
    I tried breaking the presentation into two parts. Part 1 was 58 slides and I experienced the same behavior. I've not tried part two yet.
    In the past, I practiced, on my computer, with the aggregator. Is this the best route? We have no experience hosting an aggregator project on our server. Are there any special concerns about doing so? (I'm not the person who does this. He is out of the office at this time). Would daisy-chaining be a better route? (if so, what is the best source for instruction to do this?)

    Again, I did not see the elephant in the room. I neglected to notice a default setting. Once corrected, everything works. My bad.
    But, I would still like to know what determines the maximum number of slides on can successfully publish without Aggregator or daisy-chaining.

  • Have made some slide show libraries on publisher then saved as jpg however when I sync through itunes to my ipad the previous import is over written. Can anyone offer a solution. Thanks

    Have made some slide show libraries on publisher then saved as jpg however when I sync through itunes to my ipad the previous import is over written. Can anyone offer a solution. Thanks

    I have tried much of the same - still no joy.
    I also reported it as a bug to Apple although the response page said "we can't reply to messages"
    For now I have had to turn off auto syncing and keep plugging and unplugging until the device is recognised correctly - about 1 in 10.
    In my email to apple I also listed the contents of the xml file that keeps track of the devices that iTunes has seen:
    When seen as an ipad:
    <dict>
    <key>Connected</key>
    <date>2010-06-08T21:33:57Z</date>
    <key>Device Class</key>
    <string>iPad</string>
    <key>Family ID</key>
    <integer>10006</integer>
    <key>Firmware Version</key>
    <integer>256</integer>
    <key>Firmware Version String</key>
    <string>3.2</string>
    <key>ID</key>
    <string>8F98884620E0F9FF</string>
    <key>Serial Number</key>
    <string>V5020116Z39</string>
    <key>Updater Family ID</key>
    <integer>10006</integer>
    <key>Use Count</key>
    <integer>21</integer>
    </dict>
    When seen as an iPhone:
    <dict>
    <key>Connected</key>
    <date>2010-06-08T21:39:07Z</date>
    <key>Device Class</key>
    <string>iPhone</string>
    <key>Family ID</key>
    <integer>10006</integer>
    <key>Firmware Version</key>
    <integer>256</integer>
    <key>Firmware Version String</key>
    <string>3.2</string>
    <key>ID</key>
    <string>8F98884620E0F9FF</string>
    <key>Serial Number</key>
    <string>V5020116Z39</string>
    <key>Updater Family ID</key>
    <integer>10006</integer>
    <key>Use Count</key>
    <integer>22</integer>
    </dict>
    You will see from the Use Count that these are adjacent connections, ie plugged in as ipad then as iphone. Apart from the device class, everything else is the same.

  • Captivate 6 rendering issues when publishing flash only

    Hello,
    I wanted to ask if anybody else is experiencing the same issue as I am experiencing when I publish my captivate 6 projects:
    Issue:
    Project consists of 46 slides.  No advanced actions.  Multiple rollover images and text captions are on several slides. software capture
    When publishing to a USB or my desktop then previewing I get rendering issues and these vary from parts of the software that I am capturing not appearing at all to my master slide templates disappearing.  Whenever this happens I try publishing to flash 10 and ctick the force republish of all slides - sometimes this fixes the problem sometimes it does not.  So I try publishing to flash 9 force republish of all slides sometimes this fixes the problem sometimes it does not.  It is just so hit and miss I have to publish 4 to 5 times before I finally am successful.  So of course this is extremely frustrating when I have to make changes to the project and republish.
    Also notice that viewing in web browser has the same issue.
    Think I am going to have to go back to captivate 5.5, which is such a shame as I really love some of the new features in 6.
    Does anybody have any ideas as to why this may be happening?
    I have attached two screen dumps - one where the screen is rendered poorly and the other where I have crossed all of my fingers and toes and republished and the screen has been rendered correctly:
    Thanks
    Ali

    Hello Sankaram,
    I am experiencing the same problem as Ali, where my master slide randomly disappears in my published project. I tried the options you listed above. I also deselected "Use Master Slide Background" and "Project Background" on each slide.
    Also, I have a button on each slide (next button to move through the slides) and sometimes disappears as well. However, I can still click in that region where it should be visible, and it will progress to the next slide.
    Any suggestions?
    Thanks,
    Jackie

  • Publishing Flash and embedding

    Hello everyone,
    I'm afraid I'm very new to Flash and learning as I go, I'm
    equally new to webdesign, so apologies in advance.
    I've created a flash movie, and I've published it and got my
    various files plus HTML file and my alternate JPG.
    I can get the movie to work fine in Firefox but not at all in
    IE, so I just want the alternate jpg to display instead. However in
    the code where it says:
    //end AC code
    } else { // flash is too old or we can't detect the plugin
    var alternateContent = 'Alternate HTML content should be
    placed here.'
    + 'This content requires the Adobe Flash Player.'
    + '<a href=http://www.macromedia.com/go/getflash/>Get
    Flash</a>';
    document.write(alternateContent); // insert non-flash
    content
    I put in img src=gloworb.jpg where it prompts "alternate html
    content should be placed here" and nothing happens at all. Can
    anyone help?
    Thanks,
    Ryan

    Hiya, thanks for replying. Here is the final chunk of code of
    the published flash. Bold is my addition.
    //end AC code
    } else { // flash is too old or we can't detect the plugin
    var alternateContent = '
    img class="absol" img src="glowing orb.jpg'
    The class just relates to the positioning Ive assigned to the
    main logo, and if the flash movie cant play I just want the static
    regular logo to be visible instead.
    Thanks

  • Since swf files cannot be attached to published flash documents for iPad, what format can be attached?

    I have a multi-page animated book for iPad developed in Flash 6. Because of its length and to run more smoothly on an iPad, I’ve divided the pages into fifty separate documents –the last frame of each each page would load the next page, a back button would load the previous page. My question is: since an swf file or anything containing actionscript 3 coding cannot be imported or attached to a published flash document, does Adobe have a solution to this problem?

    The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
    It isn't possible to partition the TC although you can create a image area.
    The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
    Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
    http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
    Read carefully the speed of the USB drive plugged into the TC.

  • My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

    My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

    Hi there,
    Can you please share your Captivate version?(Help>About Adobe Captivate)
    Thanks,
    Nimmy Sukumaran.

  • [svn:fx-trunk] 5812: Fixed a bug where direct use of Animation failed because AnimationProperty was not setting up its internal keyframes with correct duration information , so the animation would skip immediately to the end.

    Revision: 5812
    Author: [email protected]
    Date: 2009-03-31 11:34:56 -0700 (Tue, 31 Mar 2009)
    Log Message:
    Fixed a bug where direct use of Animation failed because AnimationProperty was not setting up its internal keyframes with correct duration information, so the animation would skip immediately to the end.
    Bugs: SDK-20356
    QE Notes: spark/effects Mustella tests currently hosed, couldn't run test suite
    Doc Notes: None
    Reviewer: Jason
    Testing: checkintests, Mustella effects tests could not be run (post-rename issues)
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-20356
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/AnimationProperty.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/animation/Animation.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AnimateColorIns tance.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AnimateShaderTr ansitionInstance.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/FadeInstance.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/MoveInstance.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/ResizeInstance. as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/Rotate3DInstanc e.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/RotateInstance. as

    Hi
    Can you please try setting up full persmission in the security properties for everyone on the wsconfig folder C:\ColdFusion10\config\wsconfig  and restart ColdFusion Server.
    Swaraj

  • I keep getting this message when trying to watch TV or filmsThis content requires Adobe Flash Player, which is not supported by your device

    I keep getting this message when trying to watch TV or films
    This content requires Adobe Flash Player, which is not supported by your device
    Is there an app that will play this. I can't find one....

    Flash is not supported on the iPad - and as Adobe have announced that they are stopping development on all mobile versions of it, it probably never will be.
    Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news and media sites, have their own apps in the App Store.
    If you do a search on this forum you will find hundreds of other threads on the subject.

  • Is Flash Cache fully transparent? Can I see content of a flash cache?

    Hi,
    is there possibility to see content of a flash cache like v$bh ?

    On the cell layer, you can do
    CellCLI> list flashcachecontentThat returns several info about the flashcached objects, amongst others the objectnumber that you can retrieve on the Database Layer with DBA_OBJECTS (object_id there).
    AFAIK, there is no direct view on the Database Layer for that.
    Kind regards
    Uwe Hesse
    http://uhesse.wordpress.com
    P.S.
    Example for looking at multiple Cells for FlashCache info about a certain table:
    dcli -g cells.txt "cellcli -e list flashcachecontent attributes cachedKeepSize,cachedSize,hitCount where objectnumber=75698"Usage of dcli as above is explained here:
    http://uhesse.wordpress.com/2011/03/22/exadata-part-vi-cell-administration-with-dcli/
    Edited by: Uwe Hesse on 22.03.2011 14:22
    Added the dcli part

  • How do you stop auto play only go to next slide on click once published Version 7

    How do you stop auto play only go to next slide on click once published Version 7? I mean to stop the play slide bar moving down the bottom?

    Thank you, I already have click boxes and buttons on every slide - the slider at the bottom still automatically moves, it doesn't go to next slide until button or box is clicked. I want to stop it moving if possible?
    Update: looks like it does the same on the old versions - I'm assuming its the time set to play each slide. I will just even these up so the don't look so inconsistent.

Maybe you are looking for