Animation Sound does not end when published
I have an animation with sound on a slide, but when I go off the slide, the sound continues with the sounds/narriation on the subsequent slides. During F4 and F8 previews of the project the sound ended when I went off of the slide. This is only occuring for the published files.
I have a button on the animation with the action of go to next slide, but the sound continues.
Thanks for the help,
Newer User
Hello Kelli
Try to observe the same scenario in a new test project. Either create a new slide exactly same of the slide in which you are facing challenge or try to copy and paste the slide in new project. If it works then copy and paste all the slides in the new project and then publish your project
Hope it helps
Thanks
VJ
Similar Messages
-
The navigation menu does not appear when published to a file. My 12 photos are also absent as well, just as if they wernt added.
I have tried rebuilding the site but the same problem appears. Everything else seems perfect up to tha publidhed file.
Has anyone had the same problem,
John
Message was edited by: BOURBAHHave you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...
-
The navigation menu does not appear when published to a file. My 12 photos are also absent as well, just as if they wernt added.
I have tried rebuilding the site but the same problem appears. Everything else seems perfect up to tha publidhed file.
Has anyone had the same problem,
JohnHave you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...
-
I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either. I have tried making it louder quieter, restarting my computer, HELP!
There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
3. If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Reboot and test.
9. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
10. Reset the NVRAM.
11. Reset the SMC.
12. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
13. Make a "Genius" appointment at an Apple Store. -
Process does not end when binding a object to registry
I am writing a Unit Test case in which i need to create a datasource and bind it to RMI registry so that the methods i need to test can get a database connection . The problem is that after the test cases have finished running the process does not end and i have to shut it down manually . When i do not bind the datasource , the process ends put with errors because the methods do not get a connection. Even unbinding it after running the test cases does not help.
Edited by: gurpreetbhalla on Jun 25, 2009 11:56 AMpublic void testIntraDayForClient() throws Exception
ConstantConfig.JNDI_FACTORY = "com.sun.jndi.rmi.registry.RegistryContextFactory";
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.rmi.registry.RegistryContextFactory");
env.put(Context.PROVIDER_URL, "rmi:");
InitialContext ic = new InitialContext(env);
// Construct DataSource
SQLServerConnectionPoolDataSource ds = new SQLServerConnectionPoolDataSource();
ds.setURL("jdbc:sqlserver://10.200.41.201:1433;databaseName=TradeportTC");
ds.setUser("sa");
ds.setPassword("superuser");
DataSource d = ds;
ic.unbind("TCDB_JNDI");
ic.bind("TCDB_JNDI", ds);
HttpServletRequest req = new MockHttpRequest();
HttpServletResponse resp = EasyMock.createMock(HttpServletResponse.class);
ActionContext context = EasyMock.createMock(ActionContext.class);
HttpSession session = EasyMock.createMock(HttpSession.class);
EasyMock.expect(session.getAttribute("ZephyrUserName")).andReturn("sclient90");
EasyMock.expect(session.getAttribute("ZephyrDomainId")).andReturn("8a48a9cb1860e2a4011860e2c64d003a");
EasyMock.expect(session.getAttribute("isTrader")).andReturn(false);
EasyMock.expect(session.getAttribute("accountsDataDB")).andReturn(null);
EasyMock.expect(context.getSession()).andReturn(session).times(12);
session.setAttribute("vawTrades", null);
session.setAttribute("noOfDays", null);
session.setAttribute("accountNo", null);
session.setAttribute("exchange", null);
session.setAttribute("symbolName", null);
session.setAttribute("trCode", null);
session.setAttribute("status", null);
session.setAttribute("accountsDataDB", null);
EasyMock.replay(session);
EasyMock.replay(context);
MyOrdersAction action = new MyOrdersAction();
action.execute(req, resp, context);
This is the unit test case which does not exit , if i skip this binding ic.bind("TCDB_JNDI", ds);
then it exits normally with a failure, -
I have an image on my slide and when I preview the slide it appears correctly, when I hit F10 to preview next 5 sldies or publish file it does not appear. I have imported audio to the slide not to an object. I am wondering if this matters? Any help on this would be greatly appreciated.
Thank you...Rod -
Cant really explain this one, but the visible check box was checked... I then unchecked it and checked it again, now it seems to be working.....
Weird, but at least it is working. -
Content does not update when published
My content is not updating when I publish updates to my app. Side loading shows the updates, but an updated published folio doesn't. On the third try, I got a blank light grey screen. I finally had to unpublish and republish the content, which is obviously not an ideal situation.
Are there any known bugs or problems at the moment that could be causing this issue? The DPS Status page doesn't have any info.
Thanks
-ScottI'm not aware of a way to get out of this state cleanly. Uninstalling and reinstalling the app fixes the problem (unless your unpublish/republish again), but it's difficult to tell your customers to uninstall/reinstall. Another option is to unpublish and then publish the affected folios as different folios, but then some of your users will end up with two versions of a similar folio until they archive the older version.
Let me ask around to make sure that I'm correct about the cause and to see if there's a cleaner workaround. -
FLV File does not play when published to my web server
Hi. I have created a short video in VC3 and selected the FLV option to create a web page. When I uploaded the entire file content to my web server (windows 2003 server hosted at Network Solutions) the FLV file will not play. Now... if I do the same with a WMV tile, the video plays.
You can view the file at
http://www.airforcehomeseller.com/videos/va_education/VATutorials/index.htm
We have another video published in WMV format, although the video vs audio sync is out of wack at the moment, at
http://www.airforcehomeseller.com/videos/Energy%20Pricing%20101/index.htm
What am I doing wrong?
Any help would be greatly appreciated.
G-IIHi again
You should probably double-check to ensure the standard.js file was also copied in when the HTML page was imported. It should be there but it never hurts to double check.
You might also perform a double-check to ensure things ended up in the correct folder (if you are organizing your project into folders). It could be that you moved the HTML page into a different folder and orphaned the JavaScript file.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Captivate 7 exit button does not work when published to LMS
I recently published a course using Captivate 7 and uploaded it to our LMS. During the review of the course it was noticed that the Close or Exit button on the controller did not work in IE. However, it did work in Chrome.
I have looked through this forum and found that there were similar issue with older versions of Captivate. However, we have course published with Captivate 6 on our LMS in which the Close or Exit button does work.
Does anybody have a solution for this problem? Do we know if there is an update scheduled to fix this problem?
Please let me know
Dawn1. Create a button in Captivate and assign a javascript call to "MyExit()"
2. Create a .js file called CourseExit.js.
3. Place the following code into that file.
function MyExit()
var SD = window.parent;
if (blnReachedEnd == false && confirm("Would you like to save your progress to resume later?")){
SCORM2004_CallSetValue("cmi.exit", "suspend");
SCORM2004_CallSetValue("adl.nav.request", "suspendAll");
else{
SCORM2004_CallSetValue("cmi.exit", "");
SCORM2004_CallSetValue("adl.nav.request", "exitAll");
Unload(true);
4. Place the CourseExit.js into the "assets/js/" in the published folder
5. Add "<script language="JavaScript1.2" src="assets/js/CourseExit.js"></script>" to the html file that was output on the publish.
I was able to set this up on the set up files on the local hard disk but so all I had to do was create a button and add the "MyExit()" code to the button, but when the next update came out it reset the hard disk files. So, I have just resorted to updating the output file as seen above.
Hope this helps.
Garrett -
My video sound does not work when added to a pdf
I just bought adobe acrobat pro and when I insert a video it plays but with no sound. I have tried several different videos (quicktime) and they all do the same thing. I am working on a mac
Think I got it to work:
Just added the SetSystemStream in the button scripts that jumps to the chapter menu. Now I can go directly to a chapter point and have the subtitles on or off, depending on the GPRM value (that is set in the Language select menu).
Not sure if this is the best way, though. Scripting can be done in many ways - I tend to use separate scripts rather than having a few and more compex scripts. Works for me - most of the time.
G4 Dual, FCP5, DVDSP4, BitVice, Soundtrack Pro Mac OS X (10.4.3) 2 GB RAM, SuperDrive
G4 Dual, FCP5, DVDSP4, BitVice, Soundtrack Pro Mac OS X (10.4.3) 2 GB RAM, SuperDrive -
Sometimes Sound does not play when playing multiple Sounds simultaneously
This is also a best practices question, too.
I built a game that uses a lot of different sounds (about 48 I think). Many are short, less than a second, and a few are longer, music cues, etc.
Example problem: Sometimes when there are a lot of sounds playing and a music cue is suppose to fire, the music sound doesn't play. I made a trace on the function that plays the music sound, and that function does execute. Are there limits on how many sounds can be playing simultaneously? (This doesn't only happen to a particular sound , could be any sound)
Also, as far as best practices, If there is a sound that could be played multiple times simultaneously, should a new instance of that sound be created each time its played? If there is only one instance of that sound, will the previous playing of that sound be cancelled when called to play again?
Thanks,
AdamThanks.
I guess I could add channels to an array as they start and remove them from the array when they are done playing to keep track. That way when an important sound, like a music cue, is suppossed to play I can check the array stop enough sounds to allow the music cue to play. Hopefully it wont be too much overhead with all those listeners. -
Vba-m process does not end when program is exited
If I run a game in VBA-M, and while running the game, I exit the program, the VBA-M process continues to run in the background. How do I fix this?
Oh, interesting...
I get this but only if I have the window manager tell it to quit. (i3wm) I then have to send a kill 9 to the process. It seems to not be properly responding to kill 15.
VBA-M will exit properly if I use its own menu option or the ctrl+q shortcut. -
VOD Sound drop at commercials and does not return when TV show resumes
i've noticed that there are other customers experiencing this problem and I have not seen any response from COmast support.When playing a TV-Show from On-Demand, the sound drops when a commerical starts and does not return when the TV Show resumes.A reenct example: Walking Dead 515.Yes, I have called comcast support to report it.Of course they wanted me to go through the standard drill - Power Off/On; Refresh Signal; etc. with no result...The problem occurs on series, e.g. - Walking Dead 515; Grey's Anatomy; It happens after the episode has been in the On Demand listing for about a week.It seems that the sponsors are no longer paying for the commercial, so the sound drops when the commercial comes on.However, the sound does not come back when the commercials end and the show comes back on.Stopping playback and starting at that point returns the sound, but, - oftentimes, the counter doesn't advance correctly in the Recently Viewed listing, so you end up starting back to the last time you stopped it. This is clearly a bug on the back-end, and I don't expect it to be fixed until enough people complain and Comcast Support replicates the problem observes it for themselves.
I have this EXACT problem on Anthony Bourdain's show Parts Unknown and the Last Ship. As soon as it hits the advertizement sound drops and continues as dropped. Pausing and restarting the program completely after exit regains sound but as soon as it hits another commercial it goes out again. The counter problem makes this option only good for a few times. Then it resets back.
-
When a video is taken in Photo Booth, the sound does not match up
When trying to take a video on photobooth, the sound does not match up with the image when the video is played back. What can I do to fix this?
Check your footage interpretation, split the audio in an external program, convert the sample rate and import it separately or whatever. Most likely you simply have used unsuitable recording settings with odd sample and data rates.
Mylenium -
When watching a movie in Itunes the sound does not match the lips
when watching a movie in Itunes the sound does not match the lips, is this normal? & If I purchase a movie will it play like a normal dvd?
Try the suggestions in this thread.
Maybe you are looking for
-
How to delete multi contacts in one time
i need to delete multi contacts in one time there is any way for this.
-
Sub selects in a SQL statement
Hi, I have a query with an obsene amount of sub selects, for example : SELECT p.ID, (select something from data where id = p.id) data1, (select somelse from data2 where id = p.id) data2, (select someelse from data3 where id = p.id) data3, (select som
-
I want to be able to "Drag and Drop" to the Hard Drive.... but don;t seem to be able to.
-
Performance Issue in NetworkInterface.getNetworkInterface in windows JRE 7
NetworkInterface.getNetworkInterface() call takes 10 times more time when run in Windows JRE 7. The same call runs much faster in JRE 6. Sample Program, I wrote a small program which just fetches the network interfaces using java.net.NetworkInterface
-
Logic regarding EVENTS OnFilter and OnLeadSelect for table ui element
provide me logic regarding EVENTS OnFilter and OnLeadSelect for table ui element for webdynpro abap application.