ANNORMAL WIRELESS SYNC - PLEASE HELP THANKS

hi my name is Mathew,
im a IT Tech Support,
i bought yesturday a TRENDnet Wireless Card(PCI):
Details of the Wireless Card:
TRENDnet
TEW-421PC
TEW-423PI
Details of the Router:
Linksys
WRT54G v6
My other testing card from linksys(From my laptop)
Linksys
WPC54G
Well i was glad that i can finally use my desktop on my wireless network, im a hard gamer, i play a lots games. Yesturday, after installing the wireless card, i got connected to it without any problems(using WEP at that time). I started my favorite game, all was working fine till 1min5-8 seconds, i got a lag spike of 3 second EVERY 1min5-8 seconds, then i said omg this could be the wireless card? Then i removed all protections from my router, i had a this time a not protected network to do my tests. I got the same lag spike every 1minute 5-8second(timed it). Then i disabled my wireless card and re-activated my Ethernet card, reconnect to the game and solved completly my problems. Then i was a little confused, i putted back the security on my wireless router, and started the same game on my laptop at my surprise i didnt get any lag spikes at all. After all those testing i found out that the TRENDnet TEW-421PC/TEW-423PI have serious problems of Sync with the Linksys WRT54G Router.
My question is, how can i fix that? get money back and buy a linksys card? i would like fix this problem. Help can i have it?
Thanks in advance,
Mathew
Message Edited by Mathew21 on 01-11-200709:23 PM

If ur getting the connection fine with linksys card & was working fine with other card, you can try upgrading firmware for the router first,....
You can get the latest firmware on     www.linksys.com/download     select the proper model number of router in list & upgrade it,..
To upgrade firmware you have to log on router setup page by typing ip of router at internet explorer address bar http://192.168.1.1 , then go to adminstration tab
then go to sub tab "firmware upgrade" & upgrade firmware,...
Now check if it works or not

Similar Messages

  • I had just upgraded my OS to the OS X Mavericks.  After doing so, I noticed that my MS Outlook for Mac 2011 does not sync with the calendar/contacts/notes, thus, also not sync these info with my iPhone4s anymore.  Please help, thank you.

    Dear Sirs,
    I had just upgraded my OS to the OS X Mavericks.  After doing so, I noticed the following changes:
    1) My MS Outlook for Mac 2011 does not sync with my Mac book's calendar/contacts/notes.
    2) My iPhone4s does not sync with my Mac book's calendar/contacts/notes anymore.
    Please help, thank you.
    aawwii

    Correct, USB local sync was taken away from iphones and ipads with 10.9.1 and 2. We are not allowed to speculate on rumours it might come back in 10.9.3 plus new iTunes. Either wait and see or explore Syncmate 5 beta free trial.
    icloud still works.
    Cant help with the Outlook problem.

  • Can't sync calendar from mac (OS X version 10.9.2) to iPhone (5s, version 7.1.1). Please help. thanks.

    can't sync calendar from mac (OS X version 10.9.2) to iPhone (5s, version 7.1.1). Please help. thanks.

    got answer by reading past community posts.   The answer is to sync by turning on iCloud on both computer and iPhone. 

  • HT1212 tried to restore my iPod, received this error code: 0xE8000065?!! please help thanks

    Tired to restore my iPod, but I received this error code: 0xE8000065
    Please help
    Thanks all

    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
    Unknown Error containing "0xE" when restoring
    To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.

  • Lenovo s10e Wireless problem - please help

    I have recently purchased a Lenovo S10e idealpad netbook. I experience difficulties with the wireless connection at my work. It works fine at home. I have searched these forums and found many similar issues listed but no solutions?
    Let me explain. 
    I have two wireless networks at work, one is called "wi fi" and the other "staff_wlan" 
    The "wi fi" configuration is as such,
    Network name (SSID): wi fi
    Connect even if this network is not broadcasting is ticked
    Network Authentication: Open
    Data encription: WEP
    Network Key: **********
    Key Index (advanced): 1
    Authentication: Enable IEEE 802.1x authentications for this network is ticked
    EAP type: Smart Card or other Certificate
    Authenticate as computer when computer information is available is ticked
    Connection: Connect when this network is in range is ticked 
    The "staff_wlan" configuration is as such,
    Network name (SSID): staff_wlan"
    Connect even if this network is not broadcasting is ticked
    Network Authentication: WPA2
    Data encryption: AES
    Authentication: EAP type: Smart Card or other Certificate
    Authenticate as computer when computer information is available is ticked 
    Ok, to now set the scene.I have rebooted to start with a default setup.The "wi fi" network connects no problem. I have ping -t running in the background, responding happily, no timeouts. I can also browse and download email etc. Under "View Available Wireless Networks" I can see the "wi fi" network listed, full 5 bars signal, it says "Connected".  Everything 'seems' to be behaving normally.
    At some point while using the machine my browsing and rdp session becomes erratic and is not stable, despite that the ping is still responding merrily. Under "View Available Networks" the "wi fi" connection now says "Automatic" and the "Connect" button is enabled. It 'seems' as though there is no network connection. I can still however browse. 
    At some point in the Wireless Network Connections the "wi fi" network changes to "Not Connected". The ping missed about 6 responses and then continued without missing a beat. I can also still browse, although erratic and not always reliable, despite the "Not Connected".
    As I said, my other wireless connection "staff_wlan" using WPA2 and AES does not behave like this, that works perfectly fine. The reason I don't use this network is that it does not have coverage throughout our building.
    My wireless network at home also works perfectly. 
    I have updated the Broadcom 802.11g drivers to version 5.10.38.14
    I have also flashed the BIOS to version 14CN67WW 
    Please help. 
    thank you
    Kevin
    Message Edited by CandyMan_ZA on 07-03-2009 01:09 PM

    Windows XP Home has limitations when it comes to connecting at corporate networks, and this may be the reason for your troubles. Of course I'm just guessing, since I don't know the setup on the server. But a simple thing like different credentials for different folders on the server is not possible in Windows XP Home, and it needs to drop the connection with the first set of credentials before it can use the new credentials.
    Please talk to your friendly sysadmin at work.
    Hans

  • I erased an iphone on find my iphone , so i wanted to know what happened and I erased my without a sim card and now I says I cant go on it until i put in a sim card. Did i ruin the phone please help thanks.

    I erased an iphone on find my iphone , so i wanted to know what happened and I erased my without a sim card and now I says I cant go on it until i put in a sim card. Did i ruin the phone please help thanks.

    You did not ruin the phone, you will need a sim card to activate the phone and then connect the phone to itunes and do a restore from back up.
    http://support.apple.com/kb/HT1414

  • I have itunee 11 and iphone 4 and i can't sync my apps to the iphone. it just stops on "determining apps to sync".please help

    i have itunee 11 and iphone 4 and i can't sync my apps to the iphone. it just stops on "determining apps to sync".please help

    it is an itouch, i buy apps from the app store, they are purchased, they show up in my app section but when i try to sync them to my itouch they do not show up in on the itouch. i have tried to atuthorize and deauthorize the computer also few times, rebooted computer and still nothing. when i restore the firmware and have everything reinstall all over again the apps music and such, all show up. however if i buy a new app and try to sync it with the itouch it does not show up despite the fact that the computer states 'installing "......" whatever app. it happens with numerous apps, there is no rhyme and reason to why certain apps just do not show up on the itouch. the authorize/deauthorize deal does nothing to rectify the situtaion. any other ideas ?

  • My ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    Hey erinoneill24,
    Thanks for using Apple Support Communities.
    Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
    iPod displays "Use iTunes to restore" message
    http://support.apple.com/kb/ts1441?viewlocale=it_it
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
    If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
    Have a nice day,
    Mario

  • AirPlay not showing on iPad anywhere. I've tried ation and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

    AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

    To use AirPlay, you need the following:
    1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
    2. Apple TV (2nd or 3rd generation)
    3. AirPort Express
    4. Wi-Fi (802.11a/g/n) network
    http://support.apple.com/kb/ht4437

  • TS1365 MacBook Pro (15-inch, Late 2011) It turns on for less than 60 sec thens shutsoff by itself, it won't load to recovery hd partition, won't load to mac OS already replaced MLB, problem still persist.. please help thanks in advance

    MacBook Pro (15-inch, Late 2011) It turns on for less than 60 sec thens shutsoff by itself, it won't load to recovery hd partition, won't load to mac OS and already replaced with new MLB, but the problem still persist.. able to run ASD EFI but ASD OS wont work.please help thanks in advance

    Holy crap, I got it to work.
    Essentially, I just waited until DiskWarrior reached Step 9 and told it to skip the step before it had a chance to freeze. It skipped successfully, moved on, rebuilt and replaced the faulty directory files.
    So far the computer is booting like normal, I can log in, and I'm currently copying all of the data to an external as I type this.
    I still have no idea why the computer wouldn't mount or boot to any drive, but I guess I'll deal with that later.

  • My ipad 2 cant open. its appear a connector and a logo of itunes.please help thanks, my ipad 2 cant open. its appear a connector and a logo of itunes.please help thanks

    My ipad 2 cant open. Its appear a connector and a logo of itunes. Please help thanks!

    You are in Recovery Mode.
    Follow step 1 to 5 closely to recover your iPad.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times

  • How do I connect ny samsung tab2 note to hp deskjet 2540 if you could please help, thank you

    how do I connect ny samsung tab2 note to hp deskjet 2540 if you could please help, thank you

    Hi,
    Your printer is not an ePrint printer as shown:
       http://www8.hp.com/au/en/products/printers/product-detail.html?oid=5296007#!tab=specs
    Please try the SECOND part of the following setup (for classic printers):
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817255&cc=us&dlc=en&lc=en#N65
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT5312 I do not remember the security answer apple ID.Please help.Thanks you!

    I do not remember the security answer apple ID.Please help.Thanks you!

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 on the page that you posted from should let you reset them : go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

  • HT201269 hi, my new device was set up in the store that I bought it from. How can I transfer all old text messages over to my new device? I have followed the icloud back up steps on this page. Please help, thank you.

    hi, my new device was set up in the store that I bought it from. How can I transfer all old text messages over to my new device? I have followed the icloud back up steps on this page. Please help, thank you.
    Its an iPhone 4
    Message was edited by: zzziggy85

    Here is how
    http://support.apple.com/kb/HT2109

  • TS1696 uninstalled quick play still got no sound on films someone please help thanks

    no sound for films uninstalled quick player someone please help thanks.

    I'm not familiar with XP Home, you should be able to right click on the folder, and set the share permissions. You may have to turn off Simple Sharing to get access to this. Also you can set permissions on the folder as well. The share permissions I believe are Read, Write and Full Control. The NTFS should be able to set Read, Write, Modify, etc. Remember in Windows it will take the least privileged, meaning if you set the Share permissions to Read, and the NTFS to Write, you will only be able to read.

Maybe you are looking for

  • Text not showing in Flash IDE

    This suddenly happened today. Same problem throughout all my project files and Flash versions (CS5.5 and 6). I am using classic text fields. Doesn't matter they're static/dynamic, embedded, or different anti-alias options. They just show a text field

  • Restriction of Payment to Vendor above Purchase Order Amount

    Hi Experts, I have a requirement where my user wants an error message to appear when a Payment to Vendor is made in excess of the PO Amount. An Information message appears when posting an advance payment through F-48 for the same but can I get a simi

  • Streaming using ethernet

    Hello i looking for a suggestion a practical one. i want to stream data using ethernet cable from controller pxie 8130 ethernet slot,i have connected the controller to my PC using an ethernet cable(like form pxi 5142 digitizer onbord memory to contro

  • Adding images to rows in a table depending on file type

    Hello, Within Visual Composer we have a table which lists documents and contains information about the document type i.e. description = 'This is a Word Document', file type = 'application/msword' then I have uploaded the images (icons) for the differ

  • How to store character in file and display result on front panel

    hi currently i m working on FPGA project.i want to aquired data from FPGA board.i want to know about how to store character to file and contineous display each character on front panel in string format. i have complete up to character display on fron