Another problem with 8520 Curve

I try to download something from BB App World with the computer and the device connected on usb cable but its saying this "Device Radio Off , BB App World requiers that your device radio is turned on to continue" , what i must do?
Solved!
Go to Solution.

To turn the Radio ON, go to Network and Connections, then choose Mobile Network and make sure the Device Data is ON and you have a GPRS/EDGE as network indicator on Homescreen.
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Similar Messages

  • Problem with my curve

    Good Evening 
    I have a very big problem with my curve 8520 as the track pad hangs alot and I need to do hard rest several times and then it works after around 6 restarts.
    The biggest problem is when i wanted to reload the OS , the computer does not detect the bb when it is connected, it is as if nothing is connected to the computer.I have tried 2 laptops the same problem and I have tried another bb with the computer and that works.My current OS is 5 and I even tried to load OS by force using app loader but it is of no use as the computer doesnt detect it.
    I want to know if there is a solution for this problem and if there is an ota link for os so that i can download it .
    pls help me.
    regards

    OK, it may not be a powered USB socket on the PC. You will need to check you have the right driver. One way to check the connection is in the settings in the BB under memory there is a mass storage mode support which needs ot be on and the auto enable mass storage mode when enabled when connected. This will usually allow you to see the BB like a external hard drive or camera in windows explorer when you connect it.
    If that fails check in the PC device manager for an appropriate device with a problem - usually has a yellow exclamation mark next to it

  • After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

    After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
    iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

    columbus new boy wrote:
    How crap is that?
    It's not crap at all.
    It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
    There has to be a solution.
    Why not simply make a playlist with the songs you want on the iPhone?
    and maintain a current backup of your computer.

  • Another problem with SOAP sender

    I have another problem with SOAP scenario in a different environment (PI 7.0) from my earlier post.
    Scenario:
    Soap Sender -> PI -> Soap Receiver
    Following steps from GoogleSearch SOAP scenario in the SAP How-to Guide for SAP NetWeaver '04 entitled: "How To... Use the XI 3.0 SOAP Adapter" version 1.00 - March 2006.
    I have loaded in the api.google.com/GoogleSearch.wsdl file as an External definition and created the SOAP receiver as described in the How-to guide.  It takes a doGoogleSearch as input and sends back a doGoogleSearchResponse (Sync Call). 
    Note that the GoogleSearch.wsdl contains a complex type ResultElementArray that refers to ResultElement\[\], and a DirectoryCategoryArray that refers to DirectoryCategory\[\].  The ResultElement and DirectoryCategory types are defined in the GoogleSearch.wsdl file.
    Problem One:
    The generated WSDL for the SOAP sender contains the ResultElementArray and DirectoryCategoryArray types but it DOES NOT contain the required ResultElement and DirectoryCategory types.  XML Spy complains that this WSDL is not valid because the type ResultElement\[\] is not defined.
    Problem Two:
    I generate a SOAP message in XML Spy, provide values for the doGoogleSearch fields, and send.  In SXMB_MONI, the SOAP sender payload contains only the <key> value from the doGoogleSearch message body, i.e. <part name="key" type="xsd:string" />
    The other doGoogleSearch fields seem to be missing, i.e.
      <part name="q" type="xsd:string" />
      <part name="start" type="xsd:int" />
      <part name="maxResults" type="xsd:int" />
      <part name="filter" type="xsd:boolean" />
      <part name="restrict" type="xsd:string" />
      <part name="safeSearch" type="xsd:boolean" />
      <part name="lr" type="xsd:string" />
      <part name="ie" type="xsd:string" />
      <part name="oe" type="xsd:string" />
    Does anyone know why:
    (1) PI/XI seems to leave out the ResultElement and DirectoryCategory types from the SOAP sender service WSDL file?
    (2) The doGoogleSearch message seen in SXMB_MONI contains only the first <key> field, and not the other fields?
    Thanks for any help with this.

    I have another problem with SOAP scenario in a different environment (PI 7.0) from my earlier post.
    Scenario:
    Soap Sender -> PI -> Soap Receiver
    Following steps from GoogleSearch SOAP scenario in the SAP How-to Guide for SAP NetWeaver '04 entitled: "How To... Use the XI 3.0 SOAP Adapter" version 1.00 - March 2006.
    I have loaded in the api.google.com/GoogleSearch.wsdl file as an External definition and created the SOAP receiver as described in the How-to guide.  It takes a doGoogleSearch as input and sends back a doGoogleSearchResponse (Sync Call). 
    Note that the GoogleSearch.wsdl contains a complex type ResultElementArray that refers to ResultElement\[\], and a DirectoryCategoryArray that refers to DirectoryCategory\[\].  The ResultElement and DirectoryCategory types are defined in the GoogleSearch.wsdl file.
    Problem One:
    The generated WSDL for the SOAP sender contains the ResultElementArray and DirectoryCategoryArray types but it DOES NOT contain the required ResultElement and DirectoryCategory types.  XML Spy complains that this WSDL is not valid because the type ResultElement\[\] is not defined.
    Problem Two:
    I generate a SOAP message in XML Spy, provide values for the doGoogleSearch fields, and send.  In SXMB_MONI, the SOAP sender payload contains only the <key> value from the doGoogleSearch message body, i.e. <part name="key" type="xsd:string" />
    The other doGoogleSearch fields seem to be missing, i.e.
      <part name="q" type="xsd:string" />
      <part name="start" type="xsd:int" />
      <part name="maxResults" type="xsd:int" />
      <part name="filter" type="xsd:boolean" />
      <part name="restrict" type="xsd:string" />
      <part name="safeSearch" type="xsd:boolean" />
      <part name="lr" type="xsd:string" />
      <part name="ie" type="xsd:string" />
      <part name="oe" type="xsd:string" />
    Does anyone know why:
    (1) PI/XI seems to leave out the ResultElement and DirectoryCategory types from the SOAP sender service WSDL file?
    (2) The doGoogleSearch message seen in SXMB_MONI contains only the first <key> field, and not the other fields?
    Thanks for any help with this.

  • Hi everyone,I have an Iphone 4S,when I updated iOS 7 my phone got slow,so please help me how to downgrade it to 6.1.3 or 6.1.3,I have another problem with iOS 7,I cant request my credit balancing,when i type *101

    Hi everyone,I have an Iphone 4S,when I updated iOS 7 my phone got slow,so please help me how to downgrade it to 6.1.3 or 6.1.3,I have another problem with iOS 7,I cant request my credit balancing,when i type *101# automatically calls and says "this number dows not excits",I wnat iOS 6.1.2 back ..

    sorry for my bad english ..

  • Problem with BB Curve 8520

    Hello everybody, 
    I have got a Blackberry Curve 8520 for one year now, and I engaged myself for 24 months with my operator ( Orange FR)
    Two days ago, I got a problem with a button 2/e, which doesn't work anymore. It happened suddenly, I was writtening a message when I broke .. 
    I don't know what should I do, is there any Blackberry assurance ? or something that can fix it ? 
    Had anybody ever had the same problem ? 
    Thank you very much 
    Joz

    Hi and Welcome to the Forums!
    If you purchased your BB through your carrier or an authorized reseller, then they are your warranty service provider. Typically, the devices are warranted against defects for one year. You should take it in to them for evaluation.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Keypad problem for 8520 curve model

    Dear Blackberry team,
    I had purchased of blackberry mobile model no. 8520-curve for 2 may'12. After 10 days my Keypad is not working.
    I have  send the mobile for authorized service centre in lucknow name is Redington. He has return to mobile after 1 month without repair and send the massage liquid problem.
    I have pay to charge 220/- but i am sure that is not a liquid problem may  be  create in other problem.
    Request to you,Kindly help me because I have suffering is very big problem.
    bhogendramishra

    Hi bhogendra75,
    Welcome to the Community,
    I agree with your concern but if an authorize service center says so then there is a little chance of getting it on road,But if you still think that there is no liquid damage then you can try a few things to reassure yourself,and I also think that there is no problem in trying,So we can just try for that have a look :
    1.First make sure you have your backup.
    2.KB02318 : How to delete all the data or all data and applications on a BlackBerry Smartphone.
    3.Installing OS on your device :
    Credit sdgardne :
    1) Uninstall, from your PC, any BB OS packages
    2) Download BB Desktop Software  BlackBerry desktop software
    3) Download and install, to your PC, the BB OS package you desire:Carriers ( but make sure it is of the same device model)
    4) If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    5) Launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC. If, during the process, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
    Don't forget to backup.
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Try it and let us know
    Good Luck
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Is this yet another problem with 7.5 or is it just me . . .

    Upgrade seemed to be fine, at first . . . now I keep getting distortion on songs. It seems to be quite random and just because a song has been distorted when I've listened to it once doesn't mean it will be when I listen to it again! It's driving me insane. Is this yet another bug or have I done something wrong (apart from upgrading to 7.5).

    Hi Emlou,
    If you have a Windows based operating system such as XP -
    It seems to me that you are suffering what I am having the same problem with - the program takes up to much of your computer's processing usage. If you go into your task manager and watch performance as ITunes runs - you will see how much of the total computer usage it is taking at any given moment - that's why your songs are distorted, slowing, garbled, etc - the usage on mine spikes from 11% - 93% AT ANY GIVEN MINUTE! I have no idea why, but I have found that by going to your "Control Panel" and clicking on Quicktime you can adjust audio output to help. Click the audio tab, click Safe Mode Wavout only (checkbox) / Then adjust the "Rate" to 96kHz / Then adjust the "Size" to 16 bit. Close that and shut down and restart Itunes - it might help a little for you.
    Maybe someone out there can help us find out why we are suffering with all the CPU usage trouble and how to adjust that spiking.
    Thanks!
    Paul

  • (Another) Problem with HP Photosmart - reinstallation

    I have a Photosmart C5280 All-in-One and a MacBook Pro, with 2.4 GHz Intel Core 2 Duo processor, using Mac OS X 10.4.11.
    Scenario this morning:
    The printer will photocopy, but there is no connection between the printer and the computer, it is not a problem with the usb cable connection. The computer will not send anything to the printer to print, and the scanner will not end anything to the computer.
    I repaired permissions using disk utility at least three times this morning. (I do it fairly often anyway).
    Scenario now:
    I have now uninstalled the software, using the HP uninstall programme, but then deleted the remaining items manually as instructed in the section on the HP site for Macs and uninstallation. I have also emptied the trash.
    Sadly however, it has made absolutely no difference. Whenever I put the installation disk into the CD drive, I can only get as far as identifying the printer. There are no printers listed, and when I tick the box, it comes up with Photosmart C5200 Series, which is correct. But the next continue box is then greyed out. (I'm wondering if following the HP instructions was such a good idea now).
    I am now stuck. I have uninstalled and can not reinstall. I have used these two together for the past year (or more) without any problems. When I initially installed, it worked fine. No problems at all. I have not recently changed any software or upgraded anything on the OS. The two were communicating last week, when I did some scanning and printing.
    Confession: I had the first problem (no scanning/printing) a couple of weeks ago, and decided to look in trash to see if I had mistakenly got rid of something and found an hp file in there. Pulled it back out. All worked fine again. But today, total blip, and no hp files in trash.
    I would be grateful if anyone could suggest a solution. I'm capable of following instructions. Oh, I have mailed Hp, but I've had no response so far. I have also looked through the stuff on here, but haven't found a similar problem, ie the connection just disappears into the ether.

    I had a response from HP:
    1) Was the printer powered on? It needs to be turned on.
    2) Was the USB plugged directly from the back on the printer to the Mac? You are not using a hub, airport or a USB cable more than 10 feet long?
    3) Power cycle the printer. Disconnect the power cord from the back of the printer. Wait 10-15 seconds and reconnect the cord. Power on the printer. Was it found?
    4) If not, restart the Mac. Once you are back up, if the HP setup Assistant does not automatically launch you can launch it by clicking on Hard Drive > Applications > Hewlett-Packard > Utilities or Device Utilities > HP Setup Assistant. Double click to launch. Was it found?
    5) If not, plug the USB cable into a different port on the computer. Was it found?
    6) If the printer is still not found, check the system profiler for the device. Click on the Blue Apple in the upper left corner, then About this Mac. On the next screen click on More Info. On the System Profiler screen, click on USB under Hardware. On the right is the printer found under USB device tree?
    7) Another thing we need to check is when you installed the software did you select the correct device. The newer printer software may contain multiple products. If you did not select the correct device during the install, the computer is looking for a different device and not finding it. To check this, run the HP uninstaller. Open Hard Drive> Applications > Hewlett-Packard > HP Uninstaller. When you get to uninstall selected device, what printer is listed. If it is not you model series, run the uninstaller. Quit the uninstaller when complete, disconnect the USB cable and restart. When you back to the desktop, empty the trash, and reinstall the software. Wait for the option to select your device!
    I want to be sure the troubleshooting steps I provided resolve the issue. If the issue continues, please reply to this message with the results. We will be glad to assist you further.
    It was not unreasonable, but I had checked the box that said Intermediate (level of computer knowledge) - so I thought asking me if the printer was turned on/checking the ports/ etc etc was a little basic.
    However on browsing this forum for similar probs I noticed a reference to Printer Setup Repair (it may have been one of your suggestions BDAqua to a different problem) so downloaded it for a free trial. Although I regularly verify and repair permissions with disk utility, I tried with Printer Setup Repair, and got this message:
    Monday, December 15, 2008 12:16:04
    Starting permission verification and repair, omitting localized files...
    The file /private/var/log/cups/page_log is missing!
    The directory /usr/include is missing!
    The directory /usr/include/cups is missing!
    The file /usr/include/cups/cups.h is missing!
    The file /usr/include/cups/http.h is missing!
    The file /usr/include/cups/image.h is missing!
    The file /usr/include/cups/ipp.h is missing!
    The file /usr/include/cups/language.h is missing!
    The file /usr/include/cups/md5.h is missing!
    The file /usr/include/cups/ppd.h is missing!
    The file /usr/include/cups/raster.h is missing!
    Recreating symbolic links...
    Done.
    Verification complete.
    837 files examined. No problems were found.
    11 missing files/directories found during the verification process. They may be responsible for certain printing problems. Printer Setup Repair cannot replace these items. Please refer to the log file for a list of the missing files/directories. You may need to reinstall OS X to resolve your printing issues. Certain files and directories are deleted when using the Reset Printing System option. These files and directories, if required, will be recreated during normal printing.
    That message would explain why, the last time I had a problem, it was resolved with reinstalling OS X. What I don't understand is why a file suddenly disappears? Perhaps I need to move my queries to one about OS X? (I have OS X on my other Apple and no probs there.)
    Anyway, thank you for your responses and if you have any further advice or suggestions, I would be happy to hear.
    ST

  • Multiple Problems with BlackBerry Curve 9300

    Hi everyone
    Model info: BlackBerry 9300 (sG, Wi-Fi)
    OS version: v5.0.0.846 (Bundle 1440, Platform 6.3.0.39)
    Yesterday night, i get the little envelope saying that I have a sms message but when i click on the icon (sms & mms) on the screen, i couldnt see my latest sms message but infact i could see some faulty messages which i couldnt delete and i could only see half of the list and the other half  is empty with blanks. In order to view them I have to go to view folder and select my SMS inbox.  It was not like this for the past few days, as i could straight see all the latest sms message just a click on the screen icon.
    The only thing I have changed is that i accidently clicked on this:
    At the menu of the SMS and MMS, i click on Options - Inbox Settings - Other Message Types - SMS AND MMS <<<i had click on this and save it accidentally and i am not able to normal view my sms message again.
    Can anyone tell me how to change it so my sms messages could be seen without having to go to view folder and select my SMS inbox. 
    Another problem, some of the sms message is undeletable. No matter what method i have try it refuse to delete. I am still able to use it to send message but there will not be any message shown there where normally it should. Can any help on this? I have tried looking in saved folder but there is nothing in there to delete or all the option shown in the menu but there is no solution to this.
    And the trackpad, Thought there are times it is smooth scrolling but  there are times i had hard time to move it up and down left or left. Worst is sometimes i had to mover many time before the trackpad move up.
    Please Help me for the above.
    Thank You
    Karen 

    Hello, me too have the same problem with my phone.
    Model: BB 9300 (3G, Wi-Fi)
    OS: v5.0.0.977 ( Bundle 1602, Platform 6.3.0.63)
    But, this problem occured without changing any of my settings.
    so, pls help me on this.
    sreekanth.

  • Another Problem with my Apple products "iTunes could not connect to this iPhone. This device is no longer connected."

    when connect my ipad a my rmbp 15" appears this message "iTunes could not connect to this iPhone. This device is no longer connected." and ipad  is connected and disconnected all the time. but when connect the Ipad in my rmbp 13" not have a problem.
    Please I need help. i hope not to have another disappointment with  apple product.

    iTunes could not connect to this iPhone. This device is no longer connected.
    iPad 2 7.1.2
    iTunes 11.3 (54)
    iMac 27 in 10.9.4
    Follow these steps to resolve your issue for iPads
    Troubleshooting time is about 30 minutes - 1 hour
    Step 1
    Unplug the usb 2.0 cord from the 27 in iMac and iPad 2 64 GB (or what ever version you have) Power down the iPad
    Step 2
    Select your HD (Hard Drive) ( I did  this form my desk top)
    Next select the applications folder, Next right click the iTunes icon and select show package contents, select Contents.
    1.     Next select info.plist, right click and select move to trash (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
    2.     Next select pkginfo, right click and select move to trash. (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
    3.     Next Select version.plist, right click and select move to trash (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
    4.     Remove "iTunes" from your dock
    5.     From the Finder, choose Go > Go to folder.
    6. Type the following and then press Return:
/var/db/lockdown
    7. Choose View > as Icons.
    8. The Finder window should display one or more files with long alphanumeric file names.
    9. In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted.
Note: Do not delete the Lockdown folder itself.
    Delete only the files contained inside the Lockdown folder.
    Step 3
    Follow the below steps to troubleshoot the issue.
    1. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears:
/System/Library/LaunchDaemons
    2. Click Go.
    3. Locate the file "com.apple.usbmuxd.plist~orig" and drag it to the Trash. (Do not move the similarly named "com.apple.usbmuxd.plist" file to the Trash.) If you DO NOT HAVE file "com.apple.usbmuxd.plist~orig" I DELETED THE FOLLOWING (com.apple.usb.plist)
    4. In the Finder, locate iTunes in the Applications folder and drag it to the Trash. (This will not remove any of your iTunes media or your iTunes library.) You may be presented with the following message “iTunes” can’t be modified or deleted because it’s required by OS X.) Do not worry click ok and proceed troubleshooting
    5. Choose Go > Go to Folder. Enter the following location into the text field that appears:
/System/Library/Extensions
    6. Click Go.
    7. Locate the file "AppleMobileDevice.kext" and drag it to the Trash.
    8. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears:
/System/Library/PrivateFrameworks
    9. Click Go.
    10. Locate the folder "MobileDevice.framework" and drag it to the Trash.
    11. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears:
/System/Library/LaunchDaemons
    12. Click Go.
    Step 4
    Goto your hard drive in the finder
    1.     Goto Library
    2.     Goto Launch Daemons
    3.     Throw this in the trash: com.ghughes.wifisync.root.plist and anything with the words iTunes
    4.     Goto Library
    5.     Goto Application Support
    6.     Throw this in the trash: Wi-Fi Sync (it's an entire folder) and anything with iTunes
    Step 5
    (Before restart book mark the link command and D). Restart the Mac.
    Download iTunes and reinstall it. After the install, connect the 2.0 usb device to the iPad 2 while the unit is still powered off, next connect the 2.0 usb cord to iTunes, power the iPad on. iTunes will read the device and ask to trust device, select continue. Backup the iPad device to the 27 in iMac.
    Step 6
    Please Rate if it helped you! After that have a cold hard drink and enjoy the day

  • Another Problem With Memory..

    Ok, so recently I just posted that I had a problem with mem... here is another. I just checked how much memory I'm using and it says I'm using 989 out of 1 gb.. is that normal? It was 504 about an hour ago and all I have open are Adium and Safari..

    The two important questions are 1) how much is inactive and 2) how many page outs are you showing in virtual memory. In fact, the second question is the one to key on. The number of page outs will indicate how often your computer has tried to access more memory than it has and as therefore been forced to copy RAM contents to the drive so it could perform the task it was asked to do. This is when your computer is being slowly choked to death.
    Now don't just open the Activity Monitor, look at the Page ins and Page outs and panic because you have 30,000 page outs. Keep in mind that's an accumulative number and if your Mac hasn't been restarted for 90 days, well that number may not be relevant at all. So restart the computer, and use it as you normally do. Then check the status of Page Outs at 30 minute intervals. The faster the Page Outs mount up with your normal usage the more you'll benefit from an upgrade.

  • Another problem with G4 500mhz

    Ok i solved my earlier problem with the power, now I have another. But this time its not real serious. Well as you know I bought my computer used from the highschool through a auction, well i finally got my computer to turn on, but now when it turns on, 2 user profiles pop up asking for passwords (one of them being a teachers side). And I have no clue how to get around this. So if theres any way please let me know. Thanks

    Well… the nicest solution would be to reformat the drive and reinstall Mac OS X and the software you need to use. Thing is, I'm assuming you don't have have Mac OS X or software.
    So, one thing you can do is to contact AppleCare (their number will be in Apple's support pages) and have them send you out a replacement copy of the installation discs. They'll charge you a nominal fee for doing so but I highly recommend you do this.
    That'll get you started.
    If you want to do anything tricker than that you will probably need some else's help as well as the help of their Mac. Otherwise, you can just duck down to an Apple Store/Reseller and get yourself a copy of Mac OS X 10.4 (Tiger) and iLife 06. More expensive although will be all current versions rather than the Mac OS X 10.2 (Jaguar) that comes with a 500MHz Titanium.

  • Problems with Blackberry Curve GPS

    I am having problems with the GPS feature on my Blackberry Curve. Whenever I start the GPS function on Maps, all it shows is "searching for satellites. Everything is set correctly and it still doesn't do anything. I do a battery pull, then it works fine for a little bit and after awhile, it crashes again.
    I shouldn't have to do a battery pull every time I need to use this feature. Anyone have any tips on how to correct this?

    When having issues with the Vz Navigator on your Blackberry, you may need to check the application settings. Listed below are steps to ensure  your settings are correct. 
    Device Software Version 5.x
    From the Home screen, press the Menu button.
    Select Options.
    Select Advanced Options.
    Select GPS.
    Select the current setting in the GPS Data Source field.
    Select Device GPS.
    Select the current setting in the GPS Services field.
    Select one of the following settings:
    Location On
    GPS enabled
    E911 Only
    GPS disabled
    Select the current setting in the Location Aiding field.
    Select one of the following settings:
    Enabled
    Disabled
    Disabled While Roaming
    Press the Menu button then select Save.
      Additionally, you may want to update the vz navigator application on your device. I have listed steps below. 
    From the VZ Navigator home screen, press the Menu button.
    If presented with the Update screen, proceed to step 5.
    Select Preferences
    Select Advanced.
    Select Check for Updates.
    Select Accept.
    Select Click Here to Download VZ Navigator.
    Ensure Set Application Permissions is checked then select Download.
    Ensure all permissions are set to Allow, press the Menu button then select Save.
    If presented, select Yes / Replace.
    If presented, select OK.
    If presented, select Reboot Now / Reboot Later.
    The installed application cannot be accessed until the device has rebooted.
    Lastly, updating your phone to the network is also recommended once a month. This is called a PRL update and I have listed the steps below:
    To update the PRL:
    Power on the phone within the Verizon wireless coverage area.  
    Dial *228 then press SEND (this call is airtime free and may take up to 2 minutes).
    When prompted, press 2 for the option to update the PRL.
    Once completed, a confirmation message will appear to informing that the phone has been re-programmed with the new PRL.
    Press End to terminate the call.
    Power cycle the phone to complete the update.
    KinquanaH_VZw

  • Battery problems with blackberry curve

    I bought my Curve 9220 two months ago. The phone was just working fine until just a few days ago I'm having problems with the battery. I charged the phone overnight and removed the charger in the middle of the night after the battery has been fully charged. After a few hours upon waking, I checked out the battery and the charge is almost empty and the phone is overheating! It's the fourth time it happened. I don't know if this is normal or if the phone or the battery is the problem. Help!

    Hello trish
    Welcome to the forum.
    Try removing the battery, now connect charger to phone and now reinsert the battery and leave to charge. Since its heating up before monitor after it has been charging this way after some 10 minutes to see if the phone is heating up.
    There is usually some warmth that accompanies the phone, if its just warm then leave to charge for atleast 8hrs but all awhile monitoring heat.
    If the issue persists as far heating is concerned as charging it appears unsafe to continue phone your service provider and claim your warranty.

Maybe you are looking for

  • ICal does not stay open at start up

    I know you guys will think this stupid but ..... I have iCal as a start-up item. The old version would start-up and stay on the desktop. The new version quickly closes though the app is still running. I didnt want to fiddle with the "Plist" for fear

  • Can't move pages or do anything in Reader

    Using Win7 with an HP Officejet Pro 8600 Plus!  Scanned documents, but missed a page.  Is there any way to insert a page in the middle after saving in Reader XI? The HP software allows you to add or delete pages, but the add function always places th

  • Re: OracleDriver cannot be resolved to a type

    I still have the same problem which was reported in the first post. I tried all the changes mentioned above but doesn't help as I am totally new to jsp please suggest me a way out in detail. An error occurred at line: 6 in the jsp file: /one.jsp orac

  • Loan Management or Interest Rate Instrument

    Hi all, My company will implement SAP FSCM to manage our loan management, borrowing and lending. Which one better and has more values between Loan management with product type 33A and 33B, or interest rate instrument with product type 55A and 55B. Be

  • Using multiple sets of speakers in stereo configuration (for movies)

    I have hit a wall while trying to configure my stereo setup in my apartment. i'm trying to always take my stereo/audio setup to the full capabilities all the time, and i'm one small caveat away from making this idea work.  hopefully someone can help